How to dissolve dried silicone sealant. How to dissolve silicone sealant? Detailed list of methods and means Universal thinner for construction silicones

Silicone sealant is a product that no construction or construction project can do without. finishing work, because unwanted cracks constantly appear during the process, it is often necessary to seal gaps, process joints, and seamlessly connect different materials.

Silicone sealant is a paste-like mixture that hardens after application, holding everything together. The hardening time itself depends on the area of the surface being treated. It is used when working with glass, wood, aluminum, ceramics, and plastic.

Based on their composition, there are usually 2 types of sealant:

acidic, which costs much less, but it has a drawback - during operation it produces an unpleasant vinegar smell, as well as acid, which, when reacting with the surface, can damage it. To avoid such a mistake, it is necessary to check before starting work whether the material being processed and the sealant are compatible;
neutral, its main advantage is a significant degree of resistance to high temperatures. In addition, thanks to special additives, this sealant has antibacterial properties and is not susceptible to fungal attack.

Very often, when working, a problem arises than to dissolve something that accidentally gets on the surface. The fact is that usually the sealant sticks “tightly”; solving such a problem is quite difficult, but possible. Craftsmen usually use 2 methods - mechanical and chemical. To begin with, it is worth remembering that under no circumstances should you simply peel off the sealant. You will spend a lot of time and effort on this without achieving the desired results. In the end, you may be able to peel off both the sealant and the surface material on which it came in contact.

And so, first you need to cut off the main part of the trapped sealant using a blade or knife, here you need to be extremely careful and careful. Next, decide what you will use to dissolve the remaining silicone sealant. You can use a special solvent or gasoline. Many people believe that if the sealant has a vinegar smell, then it can be removed with acetic acid, but this opinion is erroneous. And so, apply the selected product to a rag, wipe the area where you are trying to remove the sealant. It is necessary to wait until the substances react. The remaining sealant should turn into a gel-like mixture, easily removed with a regular washcloth or rag. Remember that before starting work, you need to check in an inconspicuous place how the solvent will react with the surface, as it can damage the material and corrode the paint.

When using silicone sealant, special protective sleeves must be worn to avoid exposure of the sealant to the skin.

Nowadays there is a huge variety of different products in this area on the market; it is quite difficult to choose the best option at a good price and excellent quality. The Belinka company is becoming more and more popular every year among professional builders and amateurs. Their products have always been distinguished by their reliability and durability. I would like to note the main advantages of Belinka sealant:

resistance to natural influences, ultraviolet rays, high temperatures;
high level adhesion, or so-called adhesion, allowing the processing of many surfaces;
durability, thanks to which you will forget about the problem of sealing for a long time;
loyal prices;
increased frost resistance.

If you are faced with the problem of removing unnecessary material, company representatives will help you choose a mixture with which to dissolve silicone sealant.

With the products of this company, any work will become simple, easy, and does not require much time or effort.

The use of special washes with wipes

You can dissolve or dilute sealant with a silicone base using other means while maintaining its properties. Silicone rubbing is used to turn it into a liquid state without losing quality. The proportion established by the building standard is one part rubbing or lubricant to six parts building silicone. It is imperative to comply with the requirements of the standard to obtain High Quality. To obtain a homogeneous substance, you need to mix everything. The advantage of this method is that silicone in a liquid state retains its original properties.

For quick cleaning silicone from tiles, enamel, metal, polyvinyl chloride (PVC) surfaces, you can use ready-made products:

Silicone remover Penta-840 - under the influence of low temperatures it does not lose its characteristics.
The commercially available Antisil solvent softens the sealant layer on rubber gaskets.
Silicon-Entferner.
Silicone Remover - when used, the shine is maintained and the surface does not become matte.

Other effective thinners

The sealant is also diluted using silicone oil. When working with such solvents, the gloss of tiles decreases and the color tone of the surface changes. It is necessary to take into account the density of the connection chemical basis sealant. The silicone will not soften instantly; it takes some time for it to become liquid - then it can be used.

The glue must be dissolved to a liquid state at home with gasoline. The composition will provide an effect if you purchase it in household or construction stores. You should use fuel that is refined with a higher octane content than regular gasoline used at gas stations. The octane number is not constant and can change. It is acceptable to use gasoline in lighters.

Methods for preparing the solution

You should take a container for dissolving silicone sealant, and squeeze a portion of the product inside. Then gradually add gasoline, stirring constantly. The composition will turn into a jelly-like mass and take on the state of thick sour cream. In all cases, the silicone does not completely reach a liquid state; it takes the form of a jelly in the form of a pulp. During work, chemicals may come into contact with the skin of your hands. If this happens, you need to immediately cleanse the skin with alcohol or vodka. First of all, you should wipe your hands on plastic bag, and then clean the skin until the glue is completely removed with simple alcohol wipes.

Silicone solvents are sold:

liquid;
pasty;
in the form of an aerosol;
in the form of gels.

The selection of type depends on the task at hand and the specific surface.

It is forbidden to combine toluene with silicone, this leads to severe chemical poisoning.

Silicone sealants are used to connect surfaces, mask seams and seal joints. These are durable building materials. They are resistant to temperature influences and have high adhesive properties. Sometimes it becomes necessary to dissolve material stuck in a visible place. Once the glue is completely dry, it is not so easy to remove. How can you dissolve silicone sealant at home? There are many ways, and each of them has its own specifics.

Properties of silicone-based compounds

Silicone-based compounds have the following properties:

resistant to water, so they are often used in the bathroom and toilet;
can adhere to any materials;
used to fill cracks and seams;
resistance to temperature changes;
elastic, do not crack after drying;
they correct deformed areas;
have high strength.

On a note!
Added to adhesives antifungal agents. This allows them to be used in places with high humidity.

There are several substances that improve the properties of sealants. Their viscosity can be reduced using organic extenders. Adhesive properties are improved with fine glass, chalk and quartz dust. Various dyes are used for cosmetic effects.

Types of universal means

Solutions and compositions that are used to remove silicone sealant are highly aggressive. They instantly enter into chemical reactions with all types of coatings and materials. Before choosing a solvent, you need to find out whether it is suitable for a particular material. This will help avoid damage.

White Spirit

You can dissolve silicone sealant with white spirit. This solution is used on all surfaces except painted ones. People who have experience repair work, they know that white spirit dissolves any paint. To remove glue from the surface, apply the product to the glue with a sponge and wait 3-5 minutes. It is better not to wait for the composition to completely dissolve. When it becomes soft, it is carefully cut off using sharp blade or a knife. A soft plastic washcloth works well to remove softened gel.

Acetone

Acetone is a suitable solvent for silicone. They process the following types of surfaces:

wooden;
metal;
stone;
with tiled covering.

Like white spirit, acetone should not be used on painted items. It is applied to the dried composition with a sponge or cloth. When the glue becomes soft, carefully scrape it off with a spatula. The remaining silicone glue is cleaned off with a napkin. It is pre-moistened in acetone.

Solvent P646

Solvent P646 is made from several liquids of organic origin. This composition effectively removes almost all contaminants. P646 quickly brings sealants to a liquid state. After treatment with the solution, they are removed without residue, and no stains remain. It is unacceptable to treat painted surfaces with it.

Gasoline BR 1 “Galoshes”

If the glue has not yet hardened, it can be made liquid and removed with kerosene or gasoline. You need to moisten a napkin in gasoline and wipe the surface, and remove the residue with a dry and soft cloth.

Attention!
All solvents are highly toxic. When working with them, the room is well ventilated.

Special means

If it was not possible to dissolve the sealant with a universal solution, there are several special products that will help cope with the problem. Their action is based on the destruction of silicone polymer chains. The price of such compositions is higher than simple solvents, but they have a gentle and effective effect without damaging surfaces. Any special remedy even dissolves old glue.

Remover Penta 840

"Penta 840" is a destructive remover. It refers to products that completely dissolve silicone. Before work, you need to carry out a test application to avoid damage to the surface. The technique for working with the wash is as follows:

apply to a layer of silicone;
wait until it becomes soft;
Clean the resulting gel with a soft cloth;
Wash off any remaining residue with a weak solution of vinegar or lemon juice.

Dowsil OS-2

Dowsil OS-2 is produced as a liquid that evaporates instantly. It contains methylsiloxane. It is gentle on plastic and painted surfaces without dissolving them. They wash off fresh and hardened glue. You can also dilute the frozen silicone that is in the tube with Dowsil. To process, you need to spray the liquid, wait until the silicone softens and remove it with a soft cloth.

KUDO product

This is a soft aerosol that contains non-aggressive solvents. It removes residual sealants and can be used on any surface.

Mellerud

Mellerud is based on acid. It is used to process tiles, wood and glass. Before starting processing, the hardened glue is cut off with a sharp knife. The product is applied and left on the surface for 1 to 12 hours, after which the softened gel is removed.

Attention!
Mellerud cannot be used on cemented surfaces, natural stone and non-ferrous metal.

HG product

HG is a universal composition. All surfaces are treated with it. Application time can range from half an hour to 10 hours. This depends on how hard the glue is. The kit includes a brush and spatula, which can be used to conveniently remove the softened gel.

Lugato Silicon Entferner

This sealant solvent is used for the following materials:

plastics;
enamels;
ceramic coatings;
glass products;
wooden elements;
concrete and brick.

The product is not suitable for marble and non-ferrous metal products. If the surface is painted, Lugato can only be used after a preliminary test.

Body Antisil 770

It contains organic substances that have a gentle effect on surfaces. It can be used for everyone metal coatings(made of aluminum, stainless steel, chrome). "Body Antisilom" removes silicone from glass and glass-ceramic surfaces. When processing plastic, you must be careful and do not proceed with application without first testing it. If the product consists of polyethylene or fluoroplastic, the product cannot be used. Body Antisil 770 is used when treating an automobile component, removing old sealant and gaskets from it.

How to dilute frozen glue

Sometimes you need to dilute or dilute the frozen silicone in the tube. Silicone rubbing is most often used. It dilutes the glue without losing its valuable properties. To do this, take one part silicone rubbing and six parts of sealant. The glue and rub are mixed until a homogeneous mass is obtained.

You can dilute the frozen gel with silicone oil. The oil dissolves it after a few hours. Regular gasoline is also used. The fuel must be refined and have a high octane content.

Important!
Toluene cannot be used as a solvent. The chemical reaction of toluene with sealants leads to severe poisoning.

Removing sealant from different surfaces

Most often, silicone residues are removed from glass, plastic and ceramic surfaces, such as a bathtub or sink. It can get on clothes and hands during repair work.

Glass

If glue gets on the glass during work, you can use Penta-840 or White Spirit. They are applied to the surface, after which they wait until the composition softens and clean it off as usual. It is removed from glass surfaces with kerosene or gasoline, if you have them on hand.

Tile

Before processing tiles, you need to evaluate its quality and composition. Many claddings are not resistant to strong chemical compounds. If the tiles are made of “sensitive” materials, “White spirit” and “Penta” cannot be used. In this case, kerosene or gasoline are safe. They gently rub the areas and wait for the composition to soften. When it becomes soft, it is removed from the surface of the tile. When working with tiles, do not use abrasive household chemicals to avoid scratching the surface.

Tabletop

Kitchen sinks are sealed with sealants, so some of the glue ends up on the countertops. Fresh glue can be quickly removed with a rag soaked in kerosene or gasoline. If it was not possible to react in time, the dried glue is gradually rubbed with non-abrasive detergents. This will require patience, effort and accuracy, but this is the only way to save the tabletop from damage and scratches. The softened glue is removed with a wooden spatula or a soft plastic spatula.

Plastic

The surface of the plastic is smooth and has no pores, so removing glue from it is easy. Careful mechanical cleaning. If it doesn't help, use household chemicals. Before treatment, do a test application on an inconspicuous area. If the glue has not had time to dry, it is quickly removed with a clean cloth.

For your information!
It is easier to work with a thick layer of dried glue than with a thin one. A thick layer can be easily removed with a sharp object.

The knife blade should be smooth, sharp, and without jagged edges. Jagged edges and chips will immediately scratch the plastic. If the blade is sharp and thin, it will pry off the layer of glue at the very base and will not leave scratches.

When using quick-drying types of adhesive applied thin layer, using a knife is not recommended. In this case, it will only help household chemicals. Sometimes it works with laundry soap or dishwashing detergent. Rubbing alcohol and food vinegar are weak solvents, but they will remove adhesive from a plastic surface without damaging it. The solvent must be diluted in warm water and applied to the area with glue.

When working with plastic, the sealant can be removed with paint thinner or Galosh gasoline, but they must be used carefully. Some types of plastics react chemically with them. That is why any product must first be tested in inconspicuous areas.

Clothes and hands

Universal types of sealant can be wiped off with vodka or any alcohol-containing solution. If acidic sealant comes into contact with skin or clothing, use a vinegar solution. It is very caustic, so it must be washed off your hands in time, immediately after treatment. To treat clothes, vinegar is applied to the stain and left for half an hour. After this, the soft silicone is carefully cleaned with a dry cloth.

Popular remedies and folk methods

There are several popular ways to help get rid of glue:

water and a rag (they were already mentioned earlier). The method is effective only for 20 minutes after gluing;
polyethylene. It is used if fresh glue gets on open areas bodies. The bag must be applied to the area with glue, held for a couple of seconds, then quickly removed. Wash off any remaining glue with soap and water;
hot saline solution. Soiled hands are lowered into the bath. Exposure time is from 10 to 15 minutes. Salt crystals quickly soften the sealant, after which it can be quickly removed;
nail polish remover. With its help, the composition is easily removed from the skin, but this method cannot be called gentle. After treatment, wash your hands with warm water and soap and lubricate them with cream;
soiled clothes are placed in freezer. The frozen gel is carefully removed with a knife after half an hour.

In the production of soft and plastic silicone, one of the most solids– silicon. From natural material create polymers for sealants. The materials have the required plasticity to fill installation gaps and seams. Excess frozen substance must be removed from the treated surface, so it is important to know how to dissolve silicone sealant without damaging the base, texture of objects, materials, things.

After completing the repair, excess silicone must be carefully removed without damaging the surface. To choose what to dissolve silicone sealant with, you need to consider component composition material. The basis of sealants is rubber with good fluidity, due to which the composition penetrates deeply into the gaps between surfaces and hard to reach places, providing reliable sealing of joints and connections.

After complete polymerization, the substance hardens, improving the heat, sound and moisture insulation characteristics of the treated surfaces. To properly remove hardened and liquid silicone sealant, you need to take into account the features, composition and properties of the material:

Single-component substances are intended for household use, are most often used for sealing plumbing equipment.
Two-component products are self-vulcanizing compounds for industrial use with improved characteristics and a long service life.
Acid sealants universal use. Acetic acid is added to the composition, which causes the specific odor of the substance when the product is used.
Neutral substances based on alcohol or ketoxime. The composition adheres well to different surfaces and materials, therefore it is universal.
Alkaline sealants with amines are special-purpose substances for interior and exterior work, do not cause corrosion of metals, and have antiseptic properties.

To figure out how to dilute silicone sealant, you need to carefully read the component composition of the substance. Manufacturers add special additives: extenders to reduce viscosity, fungicides and antiseptics against fungus and mold. Mechanical inclusions of chalk, quartz or glass sand improve the adhesive properties of silicones, and coloring pigments increase the decorative characteristics of sealants. Considering chemical composition silicone, choose acidic or neutral solvents, which have different effects on the hardened silicone mass.

Acidic

The simplest solution for dissolving sealants is acetic acid.

It has the unique ability to dilute acidic silicones. A portion of concentrated vinegar essence (70%) is poured onto the sealant and the hardened mass is gradually stirred. The principle is similar to preparing wallpaper glue. The use of acetic sealant solvent is important for removing acidic silicones.

Important: vinegar essence reacts with non-ferrous metals, and cement surfaces leaves a characteristic alkaline coating.

Neutral

Alcohol-based products can be used on different types surfaces, the composition does not have a sharp specific odor. Due to increased moisture resistance, it is possible to remove silicone from metal products and designs. Neutral silicone solvents for silicone sealant are amine, oxide, and alcohol. The compositions are used for domestic and industrial purposes.

You can dissolve neutral silicones at home using white spirit, acetone, and purified gasoline. When using any solvents, it is important to select the product so that the sealant does not lose its properties.

Attention: Do not use toluene to dissolve silicones. This product in combination with the components of the sealant leads to chemical poisoning.

Professional removers

When processing seams, joining lines, and gaps, it may be necessary to dissolve the sealant to remove excess from the surface. Only the applied liquid sealant retains its plasticity and is easy to remove. A thick hardened layer of silicone must first be softened using solvents - special chemicals. Properties and action of silicone rubbing:

The product used softens the sealant to a liquid state.
The standard proportion is one part rubbing compound to 6 parts silicone.
To obtain a homogeneous substance, the mixture must be stirred.
In its liquid state, the sealant is easy to remove from any surface.
The use of wipes does not affect the characteristics of the substance.

For getting desired result you need to adhere to the recommended rubbing-silicone proportions. On the market building materials Ready-made products are presented to quickly dilute silicone sealant to a liquid state and easily remove from the surface. Popular washes used by repairmen:

Penta-840. Available in several versions for removing silicone from different surfaces. The composition does not lose its properties when exposed to low temperatures, effectively liquefies a completely hardened substance. A clean cloth is moistened in a solvent and wiped over the stained surface of tiles, tiles, acrylic, enamel, metal, and briefly covered with polyethylene. Penta dissolves the sealant, the remains of which can be easily removed with a rag.
Silicone Remover is a gel-based cleaner specifically designed to liquefy silicone after polymerization. The product is applied strictly to a dry surface. The composition has a high speed of action and effectively copes with the dissolution of silicone sealants various types. The contaminated surface is treated with a cleaner, left for 10 minutes and the softened mass is removed.
Lugato Silicon Entferner is a paste-like substance for universal use. Effectively removes silicone from delicate surfaces. Suitable for use on painted metal structures, easily removes sealant from wooden, tile, glass surfaces and products from natural stone. The composition acts on silicone without disturbing the texture of the material being processed.
Permaloid is an innovative silicone sealant cleaner that is best suited for removing the substance from plastic surfaces. The delicate structure of plastic requires careful handling and careful use of chemical solvents. Permaloid acts exclusively on silicone, without damaging the plastic material, leaves no marks, and can be used for metal automotive parts.
Dow Corning OS-2 is a silicone remover with degreasing properties. Purpose of the composition - deep cleaning surfaces before paint and varnish treatment, gluing parts, sealing joints. The cleaner is safe for health, therefore it can be used when treating surfaces in contact with food products. Effectively removes remaining silicone substance.

The list of removers and cleaners is supplemented by Antisil car paint solvent, which is good at removing sealant from rubber materials, Silicon-Entferner wipe and Quilosa Limpiador. When choosing thinning agents, you need to take into account the component composition of the sealant and follow the proportions and processing time specified by the manufacturer on the packaging.

Removal from various surfaces

If you take metal, wood and plastic, and try to expose the materials to the same chemical solvent, the result will not always be the same. Surfaces react differently to the components of cleaners - PVC may be deformed, paint may peel off metal, and wood will darken or fade. Therefore, to remove silicones at home, you need to pay attention to the structure of the material being processed and select gentle compounds to remove the sealant from your hands or clothes.

Glass

The solid material interacts well with solvents and has a dense structure, so the sealant layer cannot penetrate deeply into glass surface. Most effective method remove silicone - use white spirit, kerosene, purified gasoline or the professional composition Penta-840. The cleaning process takes different times depending on the effectiveness of the chosen cleaner.

Plastic

Delicate surface that requires careful handling. Does not interact well with aggressive chemicals. To remove silicone, you need to use special removers that do not corrode plastic, for example, Permaloid. The packaging must be marked by the manufacturer that the composition is suitable for plastic and plastic materials. Alternative option washes - hydrochloric acid.

Tile

The top layer of tiles has an attractive shine. Organic solvents have an effect on the material negative impact. Not recommended for use on ceramic coating products containing abrasives. White spirit cannot be used on low-quality ceramic tiles. To clean the material, you can use kerosene or special wipes.

Cloth

If acid sealant gets on the fabric, the easiest way to remove the substance is with a concentrated solution of acetic acid (70%). To do this, blot the contaminated area with undiluted vinegar and, after softening, remove the silicone mechanically. Neutral silicones can be cleaned from fabric with alcohol solutions - the composition can be applied for a while and then carefully scraped off from the fabric.

From the skin of your hands

When conducting repair and finishing works Without gloves, the sealant may get on your hands. The easiest way to remove hardened mixture is with medical alcohol, another alcohol-containing substance, or saline solution. You need to treat the contaminated area of skin by wiping your hands with a cotton swab or a piece of clean cloth. To avoid contact with silicone, it is recommended to wear gloves.

On video:How to clean silicone from bathroom tiles

Effective liquefiers

Special silicone solvents are the most effective; the products can be purchased at any hardware store. Sealant thinners are produced in the form of pastes, solutions, jellies, gels, and sprays. Removers and wipes are made from organic diluents, so when using, you need to take into account the type of surface being treated. To obtain a diluted substance at home, you can use the following available diluents:

For household purposes, to remove silicone, you can use pure kerosene or soften the substance with a salt solution, acetic acid, or hydrogen peroxide. The composition does not immediately become liquid - it depends on the strength of the molecular bonds between the polymers. Therefore, the product must be left on the surface for at least ten minutes.

Caution: Do not use acidic solvents on PVC materials based on polyester, polyurethane, polycarbonate and plexiglass.

Preparation of the solution

To dilute the sealant, you need to choose a suitable container - the container must contain a solvent and a portion of silicone so that the output is a liquid consistency. It is advisable to open windows and doors so that the room is well ventilated. You need to work with gloves, and when using aggressive chemicals, use a respirator. If the silicone needs to be diluted, the sealant is combined with a thinner, mixed and after 10 minutes a liquid substance is obtained. To clean contaminated surfaces from traces, drops, and excess silicone, proceed as follows:

The cleaner is evenly applied to the sealant.
Leave the solvent for some time.
After softening, wipe with a dry cloth.
The surface is washed with water and dried.

When using special removers, the manufacturer indicates on the packaging how long it takes to soften the composition. On average, it lasts from ten minutes to an hour. You can remove silicone residues with a scraper, being careful not to damage the surface being treated. If there are greasy traces left from the solvent, wash them off warm water with dishwashing detergent.

To avoid accidentally damaging the surface, it is recommended to test any solvent in an inconspicuous place and check the reaction of the material. It is better to give preference to professional washes and wipes - the substances effectively dilute, liquefy and dissolve silicone-based sealants. All work must be carried out using means personal protection to prevent getting into chemical reagents on the skin. Craftsmen recommend immediately making a neat seam - then you won’t have to look for a means to remove excess silicone.

How to dissolve silicone sealant (2 videos)

Means and methods for cleaning silicone sealant (20 photos)

Modern construction and repair materials are characterized by improved qualities. They are not influenced by negative factors environment. Therefore, after application it is quite difficult to wash them off. Silicone sealant also has this quality. How to dissolve this substance is often of interest to non-professional repairmen.

If you want to do the installation yourself, you might get it dirty. Decoration Materials, clothes or hands. Then you have to decide how to dissolve the adhesive-sealant. After all, on different surfaces it requires a special approach to elimination. Therefore, the same product cannot remove the substance from the skin of the hands and the tiled surface. Silicone removal technology is discussed below.

Silicone sealant and its properties

In search of an answer to the question of what can be used to dissolve silicone sealant, you need to understand what kind of substance it is. The presented compositions are used for sealing seams and joints on various surfaces. This material protects against moisture penetration and improves the thermal insulation qualities of the finish.

It is made on the basis of special rubber. The composition (depending on the scope of application) includes various additives. When exposed to air or under the influence of other chemicals, the mastic becomes hard and durable.

This sealant is often used when finishing bathrooms, creating aquariums, swimming pools, and also when installing ventilation systems.

Peculiarities

The first variety is the easiest to be affected by various chemicals. It is also necessary to consider what type of surface the substance came into contact with. Most often, the glue has to be removed from the glass, ceramic tiles, shells. It can remain on the countertop, and sometimes gets on clothes or hands.

There are different remedies for each case. Some people try to clean surfaces mechanically. However, this is a pretty bad idea. Especially when it comes to tiles, glass or countertops. Yes, and clothes can be damaged by applying mechanical forces. Therefore, it would be more correct to dissolve silicone sealant. But this process should be taken responsibly.

It should be noted that there are a number of features when removing glue. How to dissolve dried silicone sealant will depend on the type of base. If the glue has not yet hardened, it is very easy to wipe it off with a damp cloth.

But if during the first 20 minutes. The repairman did not notice the silicone stains on the material, the procedure for removing the sealant becomes much more complicated. The fact is that not every surface can be treated with chemicals. The solvent will easily damage leather, colored fabric or painted surfaces.

Therefore, under such conditions, removing silicone becomes an almost impossible task. It would be wiser to ensure the cleanliness of surrounding objects while applying the sealant.

Glass

If during the process of sealing window glass or an aquarium this material was stained with glue, you can use one of the following chemicals. In search of an answer to the question of how to dissolve silicone sealant to a liquid state, you need to consider special chemicals. This is, for example, Penta-840, white spirit.

These are special solvents produced to remove such glue. However, their cost is quite high. White spirit is considered universal. It is applied to certain time to the surface. Next, the substance, together with the softened sealant, is removed from the surface. If desired, you can try using gasoline or kerosene as a solvent. Their cost will be less, but their efficiency will be worse. Therefore, you will have to spend more effort and time to treat the surface.

Tile

When deciding how to quickly dissolve silicone sealant on tiles, it is necessary to evaluate its quality. If this cladding does not withstand the impact chemical elements, special solvents such as white spirit and Penta-840 will not work. The tile will lose its aesthetic qualities and crack.

In this case, you will have to be patient. Use gasoline or kerosene to rub unsightly areas until the silicone softens. Then it simply rubs off from the surface. Do not use abrasive products. Because of them, scratches form on the tiles.

Tabletop

When installing a new kitchen sink, a small amount of sealant may leak from underneath onto the countertop. If you react quickly, a rag with gasoline or kerosene will help remove the exposed glue. Therefore, before starting work, the necessary means should be prepared for safety.

But when deciding how to dissolve silicone sealant under the sink if it has dried, you will have to work hard. The fact is that special chemical solvents almost always ruin the countertop. Only varieties made of natural stone can withstand such impacts.

Therefore, it is necessary to rub the protruding silicone using a non-abrasive detergent or gasoline. After some time it will soften. It can be removed from the surface using a wooden spatula. She leaves minimal amount scratches

Even using detergent, you need to familiarize yourself with the characteristics of the countertop. Cheap, non-moisture-resistant varieties are destroyed when such substances remain on them for a long time. Here we can only advise mechanically removing the protruding sealant.

The work is long and painstaking. But with careful actions, you can still remove the silicone.

Clothes and hands

During the repair process, it is not uncommon for silicone sealant to get on your hands or clothing. How to dissolve this substance under such conditions is of interest to many people. If the glue that got on the fabric was universal, it can be wiped off with alcohol or vodka. These products are suitable for removing silicone from the skin of your hands. Use cotton wool soaked in the substance to gently wipe off the sealant.

But if the glue that got on the fabric or skin was acidic, it should be removed with a 70% vinegar solution. This method is only suitable for clothing. Burns may remain on the skin, especially if you rub the product vigorously.

Therefore, if this type of silicone gets on your hands, you must immediately wash it off with alcohol wipes. Work must be carried out with gloves. The clothes are treated with vinegar solution for 30 minutes. Next, use a brush to rub the silicone remaining on the fabric. This will allow you to quickly remove contamination.

Having considered the features that the presented glue has, you can independently and quite efficiently remove silicone sealant from different surfaces. How to dissolve such a substance depends on the base material. Actions must be carried out as thoughtfully as possible. Otherwise, you can harm the materials, fabric or your skin. It is better to remove dirt immediately, before the silicone dries.