If you are interested in the question " How to clean an acrylic bathtub?", then this article is just for you. The peculiarity of acrylic bathtubs is that they are completely unstable to mechanical damage, although they have a beautiful shape. This is something to keep in mind when choosing a cleaner for your plumbing fixtures.
Let's look at the main types of products that should not be used to clean an acrylic bathtub:
solvent;
solid powders.
Since an acrylic bathtub is a rather delicate piece of plumbing, it must be treated with great care. The use of products containing the above substances, as well as the use of boiling water and hard powders, can significantly reduce the quality of the top coating layer, lead to yellowing or cause scratches on the surface of the bathtub.
“Then how can you clean an acrylic bathtub at home?” - you ask. We will tell you more about this.
Today, household chemicals can offer a large number of products for cleaning acrylic plumbing. With their help, you can easily wash an acrylic bathtub from yellowness, as well as get rid of limescale and water stone that is deposited at the bottom, thanks to the quality of the water entering our house. In addition, an acrylic bathtub requires particularly careful daily care. Firstly, after any water procedure, the plumbing fixtures must be wiped dry with a cloth, avoiding the presence of moisture on acrylic surface. This leads to the appearance of plaque and yellowness. Secondly, such a bathtub should be looked after daily by wiping it with a soapy cloth or sponge, rinsing with water and wiping dry. In this case, the appearance of spots and yellowness is unlikely. But if you do neglect the plumbing, then returning it to its previous appearance will not be very difficult. To do this, you need to choose the right cleaning agent and our article will help you with this.
Cleaning chemicals
|
Product name |
Mode of application |
|
The method of application depends on the consistency of the product. It can be in the form of cream, spray and paste. The spray should be sprayed on the surface of the bath, and the cream and paste should be spread on problem areas. You need to leave the product for the amount of time specified in the instructions, then rinse it off with plenty of water and wipe the surface dry. This product is very effective in cleaning the bathtub. |
|
|
Apply foam to problem area and leave for a while, then rinse thoroughly with warm water and wipe dry. Do not allow the product to dry out and do not mix it with other products. Acrilan effectively fights all types of plaque and mold formation, and also helps prevent their reappearance. |
|
|
Bass |
The product is sprayed onto the bath and washed off with plenty of water after the time indicated on the package has expired. |
|
Apply the product to the surface, leave for seven minutes, then rinse with plenty of water. When using, it is better to wear rubber gloves and a face mask, as the product has a rather pungent odor. |
|
|
This product should be applied to the problem area and, after the time indicated on the package, rinse with water. Excellently fights soap stains, deposits and corrosion, and also prevents their reappearance. |
|
|
Ravak |
Spray or spread the product onto the acrylic coating and leave for the time indicated on the package. Then rinse thoroughly running water. |
|
Team-Profi |
Apply to the surface of the bath, after the amount of time indicated on the package, rinse thoroughly with water. The product actively fights unpleasant odors, helps restore the shine of the bath and prevent subsequent contamination. |
The list of household chemicals indicated in this table is far from final, because at the moment there are dozens of all kinds of products for caring for acrylic bathtubs. You can determine for yourself which one suits you best, but before doing this, we suggest that you familiarize yourself with traditional methods for cleaning acrylic bathtubs.
Cleaning an acrylic bathtub with folk remedies
If you are not impressed by household chemicals, you don’t want to spend money, and these products are of little use - try using folk methods for cleaning an acrylic bathtub. Most of them have been tested over the years and help to cope with most of the problems that arise when using such delicate plumbing fixtures.
Lemon acid will help get rid of limescale and whiten the bathtub. To do this, you need to fill the bath with hot (not boiling water), then pour a packet of citric acid into it and leave for two hours. After this, drain the water, rinse the bathtub with plenty of water and wipe dry with a cloth. It is recommended to carry out this procedure no more than once every six months.
To get rid of various stains, try applying toothpaste with whitening effect and rub it over the problem area with your fingers. Leave the paste on the surface of the bath for a few minutes, then rinse with water and wipe dry.
By using Soda and soap solution you can get rid of most contaminants. To do this, apply the solution to problem areas, leave for 20 minutes, then rinse with water. Do not forget to wipe the bathtub after each water procedure.
Helps fight rust solution of ammonia and hydrogen peroxide. To do this, mix them in equal proportions, take a sponge, dip it in this solution and wipe the problem area. As a rule, the effect will not be long in coming.
If the bathtub is too dirty, this can be corrected using vinegar. To do this, fill the bath with hot water and add a liter of ordinary table vinegar to it. Leave the water in the bath for 12 hours, then drain and rinse with plenty of water, then wipe the surface of the bath dry.
The effect of one method or another may be different. It depends on your bathtub, how it is used correctly and the composition of the water that gets on the plumbing. Any of these methods may help some, while others will have no luck with any of them. This is an individual indicator, so do not rush to criticize the product if it fails. As a last resort, if you follow the basic rules for caring for an acrylic bathtub, you won’t have to resort to cleaning it from stains or rust. Below is a video with details.
We will send the material to you by e-mail
A beautiful and elegant bathroom needs proper care
The characteristics of acrylic are such that it is wear-resistant and repels dirt on its own, which makes the product especially attractive. But the downside is that the surface is prone to scratches.
If you know how to care for an acrylic bathtub, it will remain white for many years. Daily cleaning after use is important. Constant care of the surface of the bathtub is carried out with a soft sponge or cloth. Apply a suitable product to them and wipe the product. After this, it is important to rinse it and wipe it dry. If the water is soft, then such a daily procedure will ensure the whiteness of the bathroom for a long time.
How to use household chemicals to clean an acrylic bathtub at home
Abundance of household cleaning chemicals different surfaces often confusing. From the entire range of cleaning products available on the market, how can I clean an acrylic bathtub at home?
They work well Akrilan, Cillit, Sarma, Acryl-Net, Star-Acrylat. Any of these products are applied to a sponge or napkin, which is used to wipe the walls of the container, and leave for several minutes. After some time, the cream-gel is washed off with warm water. It is important not to forget to wipe everything dry!
Many people are wondering whether it is possible to wash an acrylic bathtub with Domestos: if you do not violate the cleaning rules, then you can. Domestos is not left on the surface for a long time due to the strong acids in its composition. Leaves for 5-10 minutes, then rinses off with a sponge. If scratches suddenly appear, they are treated with mastic or furniture polish.
How to wash an acrylic bathtub at home using available means
If not purchasing funds, then how to clean an acrylic bathtub at home? It is not forbidden to wash the surface with dishwashing detergent, liquid soap or shower gel. But citric acid and vinegar work great.
Citric acid and apple cider vinegar as acrylic bath cleaners
We'll tell you how to clean an acrylic bathtub at home citric acid or vinegar.
How to clean an acrylic bathtub with a certain type of contamination
Let's find out how to wash an acrylic bathtub if it has dirt such as lime, rust, or yellowness on it.
Yellow spots and rust
Seeing rust on acrylic, many housewives get scared and worry about how to clean an acrylic bathtub. Their fear is justified: acrylic surfaces are easily damaged in attempts to overcome rusty tracks.
Remove rust "Sanklin", "Mr. Cheester" or means "Triton". The sight of a yellowing bathtub can upset any owner. Yellowing can occur due to incorrectly selected cleaning products, advanced age of the product, or excessive water hardness. The “adult” container is updated by bleaching the liner, and the hardness of the water can be softened a little with special products added during bathing. Acrylic care products address the problem of yellowing: they are applied to the entire surface, and then washed off after a while.
Limescale, sealant and adhesive
Limescale deposits should be washed off immediately: you can get rid of it with a soft cloth and lemon juice. How else to clean an acrylic bathtub from lime: fill the entire container with warm water and add at least 1.5 liters of a 7% solution of citric or acetic acid to it. Mix everything and leave for 12 hours.
The water is drained, the container is rinsed and wiped dry. The procedure is carried out once a year.
Important! You cannot peel off the sealant or glue - there is a high risk of damaging the coating.
From chemical solvents with silicone sealant will cope: Quilosa, Penta-840, CRC Gasket Remover.
Related article:
How to wash a mirror without streaks in different ways: water, various folk remedies, household chemicals, a napkin with an antistatic agent, how to remove limescale and traces of stickers and markers - read the publication.
Caring for an acrylic whirlpool bathtub
Caring for acrylic whirlpool bathtubs includes cleaning the nozzles from soap scum and salt deposits. To cope with this problem, 20 liters of a weak chlorine solution is poured into the hydromassage system, after which it is safely drained.
Many people have acrylic bathtubs in their homes. They are comfortable and look good, but require special care. If you choose a product at random and use the wrong materials, you can seriously damage the surface that is sensitive to abrasives.
Scratches and yellow spots will appear on it, which are quite difficult to get rid of. If you want to learn how to properly care for the surface of the hot tub and put it in order, we recommend reading this article.
In general, the process of cleaning an acrylic bathtub at home can be described as follows:
- it is necessary to apply the cleaning agent to the walls of the bathtub, Special attention pay attention to areas of visible contamination;
- leave for five minutes;
- rinse with warm water using a soft sponge or napkin;
- repeat the previous steps again if the dirt remains;
- wipe dry.
It would seem that everything is simple, but, of course, there are nuances, which will be discussed below.
The best chemicals for cleaning an acrylic bathtub are: Cif, Akrilan, Domestos, Silit beng and Cinderella. You can also use “improvised means” 
- citric acid solution and apple cider vinegar. More detailed information and look for an overview of all funds in ours.
Do not soak clothes in the bath. Also, if you bathe your pet- cat or dog - it is better to use a bedding or basket to protect the delicate surface from sharp claws.
It is better to wash an acrylic bathtub using chemicals no more often than once every ten days, and if possible, even less often. Caring for it should be very delicate; it is better not to use aggressive substances at all.
What sponges should I use?
In order to clean the acrylic bathtub, use the softest sponges and rags. You can also use cloth napkins. If you do not have the opportunity to buy a special sponge, you can use any one with soft bristles - for example, microfiber. If you can’t find it either, using regular fabric is acceptable.
The main rule is that you cannot wipe the bathtub dry, as this will scratch it. You need to use warm water and mild detergents.What can't you wash?
As mentioned above, don't scratch the bathtub. Thus, under no circumstances should you use iron jaws or metal brushes! Even if a thick layer of dirt has formed on the bathroom, you cannot remove it with iron sponges.
You also need to ensure that facilities, chosen by you, were not abrasives. Typically, abrasive properties are warned on the packaging of its composition. It is also worth consulting with a salesperson at a household goods store.
A substance hazardous to acrylic is acetone. It corrodes plastic and causes holes and cracks to appear. If chemically active substances do get onto the surface, you need to wash them off as soon as possible. cold water. High temperature will only increase the reaction rate and the bath will be damaged. Do not mix the products you use to clean the bath with:
- formaldehyde- they are incompatible with acrylic;
- chlorine- when you use it, micropores are formed. As a result, the bathtub will not last long;
- ammonia, acetone— they eat away at the walls.
Under no circumstances should you frequently use detergents that contain hydrochloric acid. Bathtubs washed with products containing this substance will initially sparkle clean, but then begin to become dirty much faster than before.
How to remove limescale at home?
Don't despair if your bathtub appears limescale. It will help you cope with it vinegar 7%:
- fill the bathtub with warm water;
- pour a whole bottle of vinegar into the bath and stir;
- wait ten to twelve hours;
- drain the water and wipe the bath with a sponge;
- Rinse the hot tub with warm water several times and then wipe dry.
This method is very effective, but it cannot be used frequently! Cleansing in this way should occur no more than once a month.
If you urgently need to clean the bathtub of plaque, and you cannot wait 10-12 hours, there is another way:
- dilute citric acid in a ratio of 1 to 2;
- apply the solution with a sponge to areas covered with plaque;
- wait about ten minutes;
- repeat the procedure and gently wipe the greased area;
- rinse with water.
Most likely, this option will not help if the layer of limescale is large. Instead of citric acid, you can use a special cleaning agent.
Cif covers the bathtub with a protective film that prevents the appearance of limescale, so if lime is a familiar and common problem, give preference to this cleaning product.Is it possible to remove rust?
It is worth noting that rust is not corrosion of the bathtub coating, since acrylic is not susceptible to corrosion. Rusty coating, which you may see on the bathroom, is what drains from your faucet due to oxidized pipes.
There are several ways to get rid of rust. Firstly, you can clean the bathtub with citric acid according to the method described above. After this treatment, the bowl will remain white for about one week. Some people recommend doing this cleaning once a month.
DIY remedy
You can also clean the bathtub using a composition you make yourself. It includes: soda and vinegar.
- take drinking and soda ash;
- pour warm water over the bath so that the soda does not scratch the surface too much;
- mix baking soda and soda ash, two tablespoons of each;
- cover the bathtub with soda solution;
- after ten minutes, mix vinegar and water, 50 grams of each substance;
- apply the solution to the soda surface;
- leave the font with the solution applied to it for thirty minutes;
- rinse everything off with warm water.
This method is good because it requires a minimum of effort, and the tools it requires can be bought everywhere and cheaply. The main thing is to clean the bathtub carefully, only in this case there will be no damage. After this, it will shine with purity.
There is another way— moisten paper napkins with vinegar and “glue” the bathtub with them, leave for half an hour, then remove the napkins and rinse the bathtub with water. You can also wipe the bath with a rag soaked in wine vinegar or citric acid, then rinse everything off and dry well.
How to clean until white and remove yellowness?
Why does an acrylic bathtub turn yellow and why do yellow spots appear on it? Experts identify many reasons leading to this unpleasant event:
- use of chlorine-containing products;
- poor quality of coating and insufficient care for it;
- old pipes that saturate the water with rust impurities.
Many consumers are wondering: how and with what can you bleach a bathtub and clean it from yellow spots? This will help toothpaste .
The main thing is to choose a paste without an abrasive effect. The presence of abrasive particles may not be indicated on the packaging, so it is worth checking as follows: squeeze a small amount of paste onto your fingers and rub the paste.
If there are abrasives, you will notice them immediately - they look like sand. This “sand” is used to clean plaque from teeth, and it can seriously damage the acrylic surface of the bathroom, so if you notice that you bought an abrasive paste, you’ll have to find another one:
- apply the paste to a soft cloth or sponge;
- wipe the surface with paste;
- clean well with water;
- wipe dry;
What to do if the bathtub still turns yellow? In this case, you should use melamine sponge. It consists of a special material that, when in contact with water, copes very well with various stubborn contaminants.
If after the procedure the yellowness still does not disappear, you will have to resort to the help of special chemicals. The main thing is to remember that the functionality of the bathroom, its actual value and your health are more important than appearance devices.
Is it worth disinfecting?
In limescale, in fats and in general in various organic substances that have nutritious microflora, fungus easily multiplies. That is why the bathtub needs to be cleaned in a timely manner, and if you do not have the opportunity to immediately get rid of dirt, it is necessary to carry out complete disinfection using special means. 
This is very simple to do: you need to select a disinfectant composition that is compatible with the acrylic coating, fill the bathtub with warm water and dissolve the product in it. Afterwards, you only have to wait ten minutes. Then rinse everything well. This method is very quick and simple, and we strongly recommend that this disinfection be carried out regularly.
Is it possible to clean steam cleaner? Of course, such a device can also be used for disinfection. Hot steam kills germs. The main thing here is not to overdo it with heating the coating. Don't stay in one place for too long.
We can also recommend the following method:
- fill the bathtub with warm water;
- dissolve two liters of 7% white in it;
- leave for ten to fifteen minutes;
- flush the water and run the bath again;
- clean off any remaining product and drain the water;
- Wipe the bathtub dry with a soft cloth.
Scratches and chips
How to update a shabby hot tub? To get rid of scratches and chips, you can rub the damage with the finest sandpaper, and then apply polishing paste. If there are a lot of small scratches on the bathroom, you just need to rub them with felt.
You can also use restoration kits, which are sold at any hardware store.
What is the best way to care for hot tubs?
Hot tubs are cleaned every few days. In this case, disinfection must be carried out, since heat water causes active proliferation of microorganisms. A feature of such bathtubs is also the need to clean not only its surface, but also the internal systems.
During a hydromassage session, oils and body washes should not be used; they settle on the pipes, clogging the hydromassage system. Use only sea salt and additives that are labeled as compatible with hydromassage baths. Avoid getting any hairspray, even hairspray, into the bathtub.
We recommend reading more about caring for hydromassage baths in a special article.Useful video
Watch interesting videos on the topic of the article:
Conclusion
So, we told you about the features of caring for acrylic bathtubs and cleaning them. If you follow our recommendations, the bathtub will last a long time and will always delight you with a beautiful, aesthetically pleasing. We hope that our article was useful and you learned a lot of useful information from it.
Acrylic bathtubs have recently become popular and have taken the place of previously widely used cast iron structures. This product captivates with its lightness, as well as its sophisticated shapes. But at the same time, quite often the owners of such plumbing equipment do not know how to clean an acrylic bathtub so as not to harm its appearance.
What is acrylic?
For the manufacture of acrylic bathtubs, plastic is used, which is characterized by significant hardness and wear resistance. The surface of such products has a dirt-repellent effect, which prevents the development of harmful microorganisms. This material has been widely used in the dental field in the past. Thanks to new technologies, its price has dropped significantly. Therefore, the material began to be actively used in the production of plumbing fixtures.
Acrylic bathtubs are impact resistant but subject to small and minor scratches. Their high-quality cleaning depends not only on which cleaning agent was chosen, but also on compliance with basic recommendations for caring for acrylic. To make the bath last long time and has not lost its whiteness and integrity, you should not bathe pets in it, or store basins and buckets. Metal objects and other utensils can damage its surface, leaving noticeable scratches.
Daily care of an acrylic bathtub
Acrylic bathtub does not require special care. It is enough to rinse it after each use with clean running water, without using aggressive cleaning agents. For acrylic bathtubs, you can purchase special “chemistry”. Of course, they also effectively fight pollution, but they are not cheap. In addition, it is not recommended to constantly expose the acrylic surface to chemical cleaning.
Many people do not know how to clean an acrylic bathtub. It turns out that to carry out such cleaning, it is enough to purchase a soft cloth or sponge. It is also necessary to use soap or a special detergent for acrylic products. For daily care, it is enough to clean the surface of the bathtub with a soapy sponge to remove possible contamination. You can even simply rinse it with clean running water and completely remove the moisture. With this care, no traces of rust or plaque will appear on the surface.
If such contamination does occur, then how to clean the acrylic bathtub in this case? If usual ways do not help, you need to choose special cleaning products.
What care products should I use?
Before we tell you how to clean an acrylic bathtub at home, we note that you need to remember some important rules. It is important to be careful and careful when processing the product. Avoid using cleaning products that contain abrasive elements, as well as pastes and powders containing ammonia compounds, chlorine, alkali and acid. You need to know that such substances can damage the outer coating of the acrylic tank, cause small cracks and scratches, and cause loss of color. Therefore, before deciding how to clean an acrylic bathtub, you should carefully read the composition of the powder or paste. Stop using metal brushes. Cleaning tools that are too hard cause scratches and damage the finish.
Cleaning Products Review
Every housewife thinks about how to clean an acrylic bathtub. Fortunately, there are currently a huge number of special tools. "Acrilan" is a cleaning foam that easily removes Various types contaminants (soap stains, limescale, rust). The product can easily cope with all types of stains. The advantage of this product is education protective film on the acrylic surface, which prevents further accumulation of plaque. But never leave the foam on the surface of acrylic products until it dries completely, and also do not mix it with other products. Use gloves during cleaning. Keep away from children.
Cif is an optimal cleaning product that is suitable for caring for all sanitary ware. The composition does not contain abrasive substances. Therefore, the acrylic surface is not in danger of losing its shine and integrity. The product is available in several forms - cream, paste, spray.
Bass is a liquid for cleaning bathroom fixtures. Suitable for daily use.
"Tim-Profi" is a detergent intended for cleaning acrylic surfaces. Among the main advantages are environmental friendliness, the ability to destroy unpleasant odors, removal of significant contaminants. The product gives the cleaned surface shine and also forms a special protective layer.
"Cinderella" - effective drug for cleaning acrylic products. An ideal option for those who cannot decide what to use to clean an acrylic bathtub. Among the disadvantages is the pungent odor that appears directly upon spraying. During processing, it is recommended to use not only gloves, but also a mask. The product must be sprayed onto the surface of the acrylic bath and left for 7 minutes. After the specified time, rinse the drug with running water and wipe the bath with a soft cloth.
"Chister" is a cleaning product for acrylic bathtubs, which is also suitable for other sanitary ware items. Ideally removes limescale, rust, grease stains and soap stains, gently cleans the surface without causing mechanical damage. The product contains an acrylic polymer, which acts as a barrier to further adhesion of dirt to the bathtub. The product protects against the appearance of fungi and bacteria. The bathtub will delight its owners with cleanliness in just a couple of minutes.
So, we have discussed how you can clean an acrylic bathtub. let `s talk about possible ways use of detergents. Familiarize yourself with the basic rules for using cleansing products. Usually the manufacturer places recommendations directly on the packaging. The basic rules of application are:
Folk remedies for caring for acrylic bathtubs
If there are no detergents and you don’t know how to clean an acrylic bathtub at home, feel free to trust people's councils. Such products do not have negative properties and do not harm health:
What do the owners of this type of plumbing say? How to clean an acrylic bathtub? Reviews on this matter are very different. However, regardless of whether you read a positive or negative comment, it is worth knowing that all products meet the qualities declared by the manufacturer. It is important to choose the optimal detergent that is suitable specifically for your bath, taking into account the features and characteristics of the water. The effectiveness of the product depends on the frequency of use. For example, when heavy pollution You may need to use the product twice to achieve a perfectly clean surface. Taking into account all the above information, you can easily determine which product to use to clean an acrylic bathtub so that the product lasts a long time.
Acrylic bathtubs are popular due to their hygiene, ease of installation and lack of corrosion. Such bathtubs require careful maintenance, since the material from which they are made has disadvantages. But there are also benefits . Caring for an acrylic bathtub is the science of cleanliness. Let's try to study it. Acrylic tanks have a good “life span”. They will last for more children, provided proper care behind their surface. In order for a new purchase to “take root” in your home, you need to know how to wash an acrylic bathtub
Features of caring for an acrylic bathtub
Note! Bathtubs made of this material require careful handling! They should not be washed more than twice a month with cleaning products. After each use, rinse the walls of the tank with cool water and wipe with a clean sponge. A couple of times a week, wipe with a sponge and soap, rinse the surface, then wipe with a completely dry cloth. Choose a fabric that is soft and clean.
The bathtub must be wiped dry so that not a drop of water remains in it overnight. And wiping the tank with a sponge every day is a guarantee that your purchase will not have any deposits. This material repels dirt and does not corrode like cast iron.
But if plaque appears, the tank is washed with cleaning agents, and not with soap and water. Because a bath is a hygienic place. If there is plaque on it, it is dirty.
How to choose a cleaning product?
Since the apartments in our country have installed comfortable baths made of acrylic, housewives are faced with new problems : How to clean an acrylic bathtub? Detergents, which were used to wash old cast iron tanks, will not work in this case. Acrylic products are not suitable for detergent compositions that contain:
- chlorine;
- acetone;
- ammonia;
- formic acid (or other acids).
An acrylic tank cannot be washed with boiling water. It is prohibited to use anti-plaque products containing formaldehyde. ammonia and other corrosive elements. This will cause damage and the bathtub will have to be removed or rebuilt, which is expensive.
Caring for an acrylic bathtub involves the use of special cleaning compounds. But which of them will be of better quality, and what do the manufacturers of these products offer customers? Using "either what" is not safe for your new bath. So which should you prefer? Here is a list of detergents and cleaning products, each of which fully corresponds to its purpose.
Convenient sprayer, delicate aroma of fresh grapes, easy cleaning - just what you need to quickly tidy up your acrylic bathtub 
Detergent compositions will help qualitatively. Choose from the rating that suits you price category, and has a tolerable smell.
Effective cleaning products for acrylic bathtubs Using cleaning products
Cleaning products are used only in accordance with the instructions for use. These are not abrasive products that are used to wash the surface “until victory”. These detergents and cleaning agents are used differently.
- This gel is applied to the surface of the tank (if it is a spray, it is splashed along the surface).
- It takes 10 minutes for the product to take effect.
- Gently with a sponge and jet warm water dirt is washed away.
- Washed again clean water and wipes himself off.
Sometimes all attempts to clear the stone from the bathtub remain in vain. Clear old bath impossible. Try updating your plumbing. These tanks are restored using the technology of applying a new layer of acrylic. will cost less than buying new plumbing.
It will be difficult to clean an old bathtub, only restoration will save you Folk cleaning products
If you want to save money, then “home cleaning technologies” are also suitable. Western products are more effective, but they have an aggressive effect on acrylic. Traditional methods cleaning is cheaper. Let's give several ways.
using what is in every home? Soap stains are easier to deal with. It's not as annoying as limescale. You can wash acrylic with a few drops of wine vinegar diluted with water. This mixture is safe, but it works no worse than other expensive care products for acrylic surfaces. Lime deposits are difficult to remove even with cleaning agents. But it is possible to get it out.You will need to do the following:
- fill the tank with warm (not hot) water to the top;
- pour 1 -1.5 liters of vinegar;
- After 10 hours, drain the water and rinse the bathroom with a sponge.
Another trouble that happens is rusty stains on the side of the bathtub from water flowing from the tap. It’s easier to monitor faucets and change them on time than to remove rust. An acrylic bathtub is not subject to rust. There are no other causes of rust other than leaking taps. But if this happens, how to deal with the pollution? How to clean a bathtub from rust?
To remove rust, use either special chemicals, or traditional methods, which do no worse than their Western competitors cleaners. Citric acid diluted in water in a ratio of 1:2 will help. The secret to preparing the mixture is simple:
- A glass of water with citric acid diluted in it is thrown into a bath of water.
- Literally after 10 minutes the bath is washed out with water.
- It is wiped clean.
Over time, the bathroom becomes yellowish . How to remove yellow stains from a bathtub? Yellow appears on the surface due to rust and salts that city tap water carries with it. This plaque cannot be washed off with abrasives or acid mixtures. You can wash off the yellowness with the same vinegar (9%), or diluted oxalic acid. It is advisable to heat the water in which you will dilute the vinegar or acid, but not too much. Since cheap acrylic does not tolerate high temperatures.
Most used folk remedies for cleaning acrylic bathtubs Pollution prevention and disinfection
Acrylic high standard Guaranteed to last 25-30 years and looks like new. The acrylic bathtub just needs care and careful operation. Let us mention once again the rules of their operation. In an acrylic bathtub, you should never:
- Soak and wash clothes.
- Allow acids or alkalis to come into contact with the surface. No abrasive cleaners.
- Bathe pets. They scratch the surface of the bathtub with their claws. The disadvantage of the acrylic bathtub surface is its softness and low strength.
- Place any basins in the tank, be it plastic or steel, and wash clothes in them. This puts the tank at risk. Scratches will appear.
As long as you stick to a weekly bath cleaning schedule and don't allow any damage, she should be fine.
Before you put new bath, plumbers recommend carrying out more thorough repairs and changing water pipes for new ones. Then a yellow coating will not appear on the bathtub. The smooth surface is not subject to “attacks” of fungal diseases or corrosion. But it is advisable to carry out disinfection once a year.
It is not recommended to bathe pets in an acrylic bathtub.
How is disinfection carried out?
How to wash an acrylic bathtub so that there is no doubt that it is disinfected and not dangerous for bathing small children? For disinfection, one more product is needed - Ravak Disinfectant. Product from the Czech company Ravak. The company constantly checks its products for quality and ensures that they are safe to use.
The order is:
- The tank is filled to the top.
- The product is diluted in a ratio of 1:10 and poured out.
- Stir and leave for literally 10 minutes.
- Then rinse off with clean water and a sponge.
It is not used often, therefore, it is beneficial to purchase 1 bottle. It disinfects not only the tank, but also the entire bathroom. Ravak Disinfectant costs 600-800 rubles. for 500 ml. But remember, the product is highly diluted with water. After the disinfection procedure, you will be confident that the bathtub is clean and the acrylic is safe from bacteria.
To clean a bathtub from rust and deposits, you will have to purchase a bunch of different products and find the right one among them. After all, everything is learned in practice. Traditional methods of washing acrylic are also effective if there is no money for professional plumbing care products.
Each of the products listed in the rating has both advantages and disadvantages associated with the composition of the substance. There is no optimal detergent composition. If you don’t find the ones listed in your nearest store, another product for cleaning acrylic bathtubs will do just fine. The main thing is to read the composition and make sure there are no chemicals in it: chlorine, ammonia or acids.
