Lobacare SportCare is a care product that meets the anti-slip requirements of DIN 18032 for sports hall floors. Designed for the care of varnished parquet and wood floor coverings, as well as linoleum. Gives the parquet surface shine without polishing. Recommended for the care of floor coverings in rooms where there are particular demands. high requirements to the anti-slip coefficient of surfaces: gyms, entertainment complexes, public institutions, dance halls.
Characteristics
- Manufacturer country Germany
- Color Transparent
- Consumption 30-40 g/m2
- Water basis
- Number of components 1
- Shelf life, years 2
- For Internal Works
- Volume, l 1
- Product code SportCare
- Weight, kg 1
Application area
For the care of varnished parquet, as well as PVC and linoleum floor coverings in sports halls. Ideal for use in combination with Lobadur water-based varnishes for sports surfaces.
Advantages
Highly resistant to streaking and shoe marks. Prevents injuries from slipping. Has an anti-slip coefficient according to DIN 18032 standard. Extends the life of the floor covering. Protects the varnish layer from the formation of marks from sudden braking. Improves optics and refreshes old coatings.
Drying time
You can walk in 1-2 hours. Full load after 12 hours.
Compound
Less than 5% anionic tensides, preservatives, polymer-dispersion components, aqueous solvents, aromatics.
Coating preparation
You must first remove dust and dirt using a vacuum cleaner, brush or mop, then wipe the surface with a slightly damp cloth with Loba CleanFix or Cleaner. Residues of other care products must be removed by general cleaning with Loba CareRemover. Observe the technical information sheets for the respective products.
Application
Shake the container with the material thoroughly. Apply SportCare evenly onto clean, dry parquet using the Lobatool Wischwiesel care brush (approx. 30-40 ml/m²); for larger areas, alternatively, use a wide mop or other suitable tool. For large areas, apply the material to a separate section of the coating, and then distribute it over its entire surface in an even layer. Work without pressure, if possible hold the application tool horizontally to the parquet surface and do not lift it. Start application on one side of the room and, moving from wall to wall, finish on the opposite side of the room where the Entrance door. In one room, it is necessary to apply the care product to the entire surface at once. Do not apply the product a second time while drying, as this may lead to the formation of streaks. After drying for 1-2 hours, you can walk on the parquet carefully.
The tiles used to decorate the floor give it a very beautiful view. But there is one drawback to such a coating, which is that when moisture gets on it, it becomes very slippery. It is to prevent this that an anti-slip tile agent is used. Let's look at the most common option.
Liquid anti-slip agents
The most common anti-slip tile products come in liquid form. In most cases they are two-component, i.e. consist of a base and various additives. The base is varnish or paint, and additives are designed to eliminate slipping.
Additives are most often a crushed abrasive polymer component that looks like very small white balls. As a result of mixing them with the base and applying them to the surface, a coating with visible grain is formed, which prevents slipping.
How to apply liquid tile anti-slip agent
First of all, the coating must be dried, cleaned and degreased. Also, when carrying out work, it is necessary to monitor the temperature environment, which should not be below 10 degrees.
The base is evenly distributed over the surface and left to dry for the time indicated on the package. After this, the anti-slip additive is mixed with varnish or paint in certain proportions and evenly applied to the first layer of base using a brush or roller.
As a rule, it takes about 12 hours for the coating to dry, during which it must be prevented from getting wet. Complete crystallization takes about three days.
The described application method and product is used for porous surfaces. On ceramic or granite tiles it won't hold. To process them, it is necessary to use specialized tools. Their composition is designed to dissolve silicon, which is contained in natural stone or enamel.
This causes very small depressions to appear, which fill with water when moistened. When you press your feet on them, water is squeezed out of the depressions, turning them into a kind of suction cups. Such products are widely used in the food industry, swimming pools, fitness clubs, etc.
They are applied very easily using an applicator and left on the surface for about 10 minutes, after which they are washed off cold water. After this, the floor can be used immediately.
Anti-slip treatment of floors is carried out in order to ensure the safety of people, using special chemical compositions. When processed, microscopic irregularities are created on the floor surface, improving traction with the soles of the visitor. The appearance of the coating does not change, but the floor becomes non-slip even when wet. After such treatment, winter slush, spilled liquids and soap suds do not cause traumatic situations.
The service is most relevant in rooms with slippery marble or tile floors, where large numbers of people often gather. This treatment is necessary on stairs, as well as in swimming pools, saunas and other places with high humidity.
The Clean Solution company offers anti-slip floor treatment at affordable prices. The work uses effective and safe compositions, the properties of which can be maintained for 5 years. A specialist will visit the site at a time convenient for the client.
All 3 results are displayed
Anti-slip agent
Luxurious sparkling stone floors, ceramic tiles or polished parquet will decorate your home or public space, and the Gliss Guard anti-slip coating will take care of your safety.
The composition is used for processing granite, marble, ceramics, concrete and other mineral horizontal surfaces. Gliss Guard works effectively indoors and outdoors – wherever there is a risk of slipping.
Advantages of the drug
NOVOTECH offers the most affordable prices on an anti-slip coating for tiles, which allows processing of large-scale surfaces - in industrial and commercial facilities, in swimming pools, gyms, outdoor pedestrian areas.
The composition is harmless to humans and gender. The material does not contain solvents or acids. The biodegradation rate is 90%. The use of material does not require special measures precautions.
Anti-slip coatings on steps containing corrosive acids destroy the surfaces being treated. The peculiarity of the composition is that the main element of this one-component product is silica.
The protective effect of the mixture is based on the interaction of its active component with the coating material. Silica molecules adhere to each other, constantly building a new protective layer on top of the existing one. Microspikes are formed at the crystallization centers, preventing slipping.
Gliss Guard – anti-slip coating for porches and streets, for floors interior spaces, which does not destroy the source material and practically does not change it appearance. The gloss of the polish may be slightly reduced. Reducing the concentration of the drug without compromising the anti-slip effect will help solve the problem. The standard composition of the working solution contains 20% mixture and 80% water.
Proper use is the key to durability and high quality of the protective coating.
Before you buy an anti-slip coating for outdoor steps or for the floor, carefully study the functionality of the composition. Professional consultations from NOVOTECH specialists will help you correctly calculate optimal quantity preparation for treating a specific surface. Gliss Guard consumption is 8 - 10 liters per m 2 - depending on the structural features of the surface.
The protective layer formed by the composition does not require constant updating. At correct application Gliss Guard has been performing its functions flawlessly for at least 2 years.
The composition significantly simplifies the cleaning process and helps protect decorative coating from pollution.
The NOVOTECH online store sells Gliss Guard composition in polyethylene canisters in convenient packaging - 0.5 l, 1 l and 5 l.
