Titanium transparent glue, technical characteristics and properties

In modern construction there are a large number of processes during repair and finishing works performed by gluing two different materials. For this purpose it is necessary to use special glue.

When choosing an adhesive, the type of surface being glued is taken into account, because certain adhesive compositions have different specializations. However, universal compounds that provide reliable bonding are more popular.

One of these glues is Titan. In this article we will look at its composition, specifications and for which finishing materials it is used.

Purpose and types

Titanium glue is universal and can be used for different surfaces.

For example, there is Titanium for foam plastic, tile adhesive, for polystyrene foam, and the like. The glue itself is multicomponent. This material has excellent technical characteristics, including resistance to temperature changes, is not afraid of a humid environment, frost-resistant, etc.

Universal titanium adhesive is available in different forms:

• Liquid Nails.
• Glue mastic.
• Universal glue.

Let's consider all its features and properties.

Universal

Mainly used for gluing linoleum, wood, parquet, polyvinyl chloride, polystyrene foam.

The glue itself is in a sealed package, which is squeezed out of it using a special dispenser. Once the material has dried, the seam is practically invisible.

It must be applied to a previously cleaned and prepared surface. Universal Titan dries in about one hour. Tile material is very popular for wall decoration.

Adhesive mastic

Used for gluing materials from the very various kinds surfaces, for example, chipboard, fiberboard, plasterboard, wood, brick, plaster, cement, concrete. Used for special ceiling tiles. Before using it, the composition must be thoroughly mixed.

Liquid Nails

Produced in small cans. The glue is squeezed out using a special construction gun. It is used for a variety of purposes. Operates in different temperature ranges.

Can be used both outside and inside the room. Few things glue as well as this type of Titan glue. So, it is used for gluing wood, PVC, polyurethane, ceramics and even metal outdoors.

Characteristics

Below, we will consider the technical characteristics of transparent Titan glue.

• Does not create any load on the surface being coated.
• Environmental friendliness.
• Heat resistance up to +100°C.
• Minimum seam area.
• Excellent viscosity.
• Has excellent adhesion to various surfaces.
• Versatility.
• Frost resistance.
• A waterproof seam is created.

To perform a particular job you need correct selection adhesive composition Titan. One of the most popular ones is polyurethane. They can be used to glue glass and plastic surfaces. It dries quickly and has good viscosity.

Due to this, it is convenient to use when gluing material to the ceiling. Unlike its analogues, it has a rather pungent odor. Therefore, when working with it, the room should be well ventilated.

Advice! When gluing a particular surface, drafts are not recommended. This may negatively affect the quality of gluing and the drying process of the composition.

It dries very quickly. This eliminates the possibility of the surface peeling off and the material moving to the side. It is best to read the manufacturer's instructions before using it.

This is important, because the recommendations for use should include polystyrene foam or polystyrene foam; if they are not, then remember, some compositions contain solvents. Their presence will cause deformation and corrosion of the plastic. Therefore, you can use Titan adhesive for tiles. You can glue ceiling tiles with this composition without much difficulty.

Its use is especially practical if the glue accidentally stains the material being glued. To remove it from the ceiling you need to use a diluted solvent. Using this composition dissolves the glue and even stains and marks are completely removed.

Bonding technology

In addition to choosing a suitable adhesive composition, it is necessary to carry out high-quality preparation of a particular surface. After all, this greatly affects the quality of all work. So, the ceiling or wall must have solid foundation. If there are areas with loose plaster, it is removed and the resulting holes are covered.

The peculiarity of gluing lies in one important action. To ensure high adhesion quality, apply Titanium glue to the material and press the product tightly to the base. Then carefully tear it off and wait about one minute.

During this time, the glue will thicken a little and dry out. After this, the panel, tile or other material is pressed tightly to the surface. Performing such manipulations will ensure reliable grip.

note

If the glue stains the material being glued, wait until it dries before removing it. This is especially effective if the material being glued is durable, like tiles. If you are gluing polystyrene foam ceiling tiles, you need not to hesitate.

For this you will need a rag. Before removing the glue from the surface, the rag is moistened. Although the composition used is transparent, it can still be seen when exposed to light.

Conclusion
So, we have looked at all the features of transparent Titan glue. The description provided will help you determine the scope of its application and how long it takes to dry. We hope you have found answers to your questions. If you have already worked with this composition, you can leave comments on this article and share your experience.

All the details about what Titan glue glues - video

obplitke.ru

properties, types, instructions for use

In this article we will tell you about Titan Wild glue, which is excellent and is often used in construction and repair work Oh. It is valued for its high level of adhesion to most building materials and resistance to external influences and temperature changes. They glue ceiling tiles, parquet, linoleum, gas silicate blocks, brick and much more.

In fact, Titan glue is a whole line of compounds developed for specific purposes. We will definitely tell you about this in detail.

Description and properties of Titan glue

Titanium adhesive is in demand on the market due to the quality of surface bonding and excellent technical characteristics:

• Effective for gluing most building materials.
• Suitable for both indoor and outdoor use.
• Resistant to mechanical stress, ultraviolet radiation, and temperature changes.
• It is water resistant.
• Elastic after drying.
• Eco-friendly (does not contain toxic components).
• Use sparingly.

The composition is suitable for gluing wood (including parquet), glass, leather, linoleum, ceramic tiles, polystyrene foam, expanded polystyrene, brick, gas silicate blocks, and also provides reliable adhesion to plaster and concrete.

If we talk about disadvantages, consumers mainly pay attention to the “death grip”, which in some cases turns from a plus into a minus.

Types of glue

Titan glue is available in several forms: in addition to universal Titan, the manufacturer offers liquid nails, wallpaper glue, styrofoam glue, sealants, acrylic glue and much more.

Universal glue



Universal mounting adhesive Titan is suitable for gluing PVC, polystyrene foam, linoleum, carpet, glaze, ceramics, leather, as well as wood and parquet. Very often this glue is used for installing ceiling tiles.

The composition is convenient to apply thin layer straight from the tube, it sets quickly, plus when it dries it remains transparent, which means it’s invisible. Does not lose elasticity from -30 to +60 °C, is not afraid of either moisture or sunlight, confirming its versatility.

Mode of application. Before application, the surface must be cleaned, leveled and dried. Next, apply the composition to both surfaces in a thin layer, wait a few minutes until it dries a little, and connect the parts to be glued (press for 5-10 seconds). The glue hardens in 40 minutes and reaches maximum strength in 24 hours.

Liquid Nails



Titanium liquid nails are available in tubes of 200 and 310 ml (the latter are equipped mounting gun) and are a white paste. They are a replacement for nails and screws.

Titan Wild liquid nails are perfect for gluing metal, PVC, wood, cork, tiles, plaster, brick, cement, decorative stone, polyurethane and polystyrene foam, etc.

Important: the composition is not suitable for polypropylene, polyethylene and wet surfaces.

The composition is applied in a thick layer to the entire surface, the excess is removed with a sponge, initial setting occurs after 15 minutes. The glue does not lose its properties even after freezing.

Powder glue (for wallpaper)



Titan wild powder adhesive is a universal composition for wallpapering. The glue has antiseptic properties, which prevents the appearance of mold and mildew. In addition, due to the special composition, the wallpaper can be adjusted directly on the wall.

The product line includes three adhesives for different types wallpaper: “universal” for paper, “non-woven” and “vinyl”.

The powder is diluted with water until homogeneous, and then applied to the canvas (or to the wall, in the case of non-woven fabric) from the middle to the edges. Before gluing, you need to let the composition set a little for 5-10 minutes. Diluted glue can be stored for no more than 1 month.

Styrofoam glue (Titan mastic)



Titan Wild adhesive mastic is used primarily for gluing ceiling tiles, baseboards, decorative elements, as well as products made of polystyrene foam, polystyrene foam and polyurethane. The composition has a high level of adhesion to concrete, cement, gypsum, plaster, wood, plywood and fiberboards.

Styrofoam adhesive can also be used to level the substrate and fill cracks and other surface imperfections before installing polyurethane products.

The composition is resistant to external influences, including sub-zero temperature and exposure to ultraviolet radiation. It contains no solvents or toxic substances, so it is safe for humans.

Important! The glue must be mixed before use.

The composition is applied with a spatula to a cleaned and degreased surface. It is better to work at a temperature of at least +8°C. The glue sets in 15–20 seconds, but during the first 10 seconds the position of the object can be adjusted. It should take about 12 hours for it to dry completely.

Sealants



Sealant Titan Wild ( universal silicone) has reliable adhesion to concrete and foam concrete, stone and brick, PVC, wood, plaster and metals. It also effectively glues gypsum boards, and also fills gaps, cracks, seals seams, etc.

Like other compounds in the Titan Wild line, the sealant is resistant to various weather conditions and temperature changes from -40 to +80 °C. It can also be painted after drying.

The sealant is applied in a single layer using a construction gun.

Instructions for use

Like any other glue, Titan is best applied to a clean and degreased surface. And after applying the glue, you need to give it a few minutes to set, and only then stick it to the surface. However, specialized formulations may have various features applications, for example, liquid nails are applied in a thick layer, and titanium for wallpaper must first be diluted with water.

The packaging of each composition contains instructions for use.

How to dilute Titan glue



If the glue has thickened, the problem can be solved with medical alcohol. However, it is worth considering that the diluted composition will take longer to dry.

Finally

In general, we can say about Titan Wild adhesives that they are ultra-strong, resistant to any weather conditions, and also extremely safe. They are not afraid of frost, sun, moisture, or sudden temperature changes, so they are used with great pleasure in construction.

Titan has developed a product for almost any type of construction activity. Before use, read the instructions, as each composition has its own specifics.

vseprokley.ru

Titanium glue: what glues?

Modern technologies make it possible to create glue for different needs and specific applications. Titan glue stands out from other manufacturers.

Popular with both ordinary buyers and professional builders. A large number of positive feedback and excellent technical characteristics allow it to occupy a leading position in the construction market among similar products.

The composition of Titan adhesive is suitable for a strong connection dissimilar materials. It has proven itself well when working with ceiling tiles from polystyrene foam and polystyrene foam.

Universal, and most importantly, high-quality glue will help to reliably glue materials such as: ceramics, linoleum, artificial and Genuine Leather, glass, paper, wood, parquet, PVC panels. In addition, “Titanium” is used to secure decorative elements, for example, from gypsum.

Considering the specifics of different types of adhesive products of this brand, Titan glue has good performance By operational characteristics. It performs well in conditions of high humidity and significant temperature changes, without loss of quality or reduction in adhesive ability.

Unlike other analogues, Titan does not become brittle after hardening. If we look at the composition of the glue in detail, there are no harmful components, which makes this product safe to use and further exploitation during construction/renovation of housing.

Specifications



The very concept of “technical characteristics” at its core is a certain set of physical, chemical and other properties of a product, which makes it possible to distinguish and distinguish similar products from each other. Based on this definition, we can distinguish following features glue "Titan":

• The use of glue is permissible both indoors and outdoors.
• "Titan" is suitable for working with different materials.
• A strong bond does not require a large amount of glue, so Titan saves money.
• Titan glue has a transparent texture, plus it is absolutely colorless.
• The seam area treated with this glue is protected from moisture penetration.

Types of glue

The Titan adhesive composition is produced in the following forms:

Universal glue



This type is ideal for working with parquet, wood, linoleum, polystyrene foam and PVC panels. After the glue hardens (as a rule, this process lasts no more than one hour), an almost invisible, transparent seam will remain at the gluing site. For best result It is necessary that the surface is prepared for application, that is, it is dry and completely clean. A special dispenser will allow you to apply the glue in a thin, neat layer.

Adhesive mastic



It will be useful if you need to glue, for example, concrete and cement, drywall and wooden panels, brick and plaster. Adhesive mastic will help level and prepare the work surface for finishing with ceramic tiles. This type of Titan glue is frost-resistant and is ready to work even in difficult conditions. climatic conditions.

Liquid Nails



Created specifically for reliable and convenient gluing of metal, ceramics, polyurethane, wood and other materials. It is produced in a tube for use with a mounting gun.

Wallpaper glue



An important feature and difference between Titan wallpaper glue and many other similar products is the presence of antiseptic components that will prevent mold and mildew from appearing. The adhesive is produced in the form of a dry powder, which will be completely ready for use after adding required quantity water.

Adhesive foam



The adhesive composition is excellent for bonding different types bricks, foam and gas silicate blocks and other mineral bases. The manufacturer emphasizes that when working, you should observe the temperature regime and do not use Titan adhesive foam at – 10 ° C and below.

Instructions for use

On the packaging of each type of product, the buyer will find instructions for use with detailed instructions on what the Titan universal adhesive glues, as well as how to use it correctly and effectively.

• For high-quality bonding of surfaces, you need to pay Special attention to prepare the grounds. They should be smooth, clean and grease-free.
• The applied layer of glue should not be too thick.
• After applying the adhesive to the surface, before fastening, you need to wait a few minutes for the glue to dry a little.
• It takes about one hour for the glue to completely harden. Maximum strength will be achieved after 24 hours.
• If working surface has a porous structure, the adhesive composition should be applied in two layers. After the first thin layer has dried, apply a second one, wait a couple of minutes and firmly fix the parts to be glued.
• It is not allowed to apply glue to whitewash. Before carrying out work, thoroughly wash and dry the surface.
• Thickened glue tends to take longer to dry and is more difficult for it to penetrate into small cracks. The situation can be corrected by diluting the composition with regular medical alcohol.

Titan glue is an excellent assistant both at the construction stage and in small household repairs.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

Usually they also look at these articles.

Titan wild (“Titan Wild”) is used in construction and repair work. There are several modifications. Each differs in release form and characteristics.

Titanium has excellent adhesive characteristics and resistance to external influences.

What glues Titan

Titan Wild cyanoacrylate adhesive first went on sale in 1992. It is used in repair and construction for gluing different surfaces, which is why it received the title of universal. You can combine materials with the same or different textures.

Titanium glue will reliably connect the following materials:

• plastic;
• ceramic tiles;
• suitable for ceiling tiles;
• aerated concrete blocks, pieces of foam blocks;
• tree;
• in everyday life it is used for crafts and needlework;
• in liquid form it is used as glue for mirrors;
• used for gluing wallpaper, paper, cardboard, foam, linoleum, parquet or carpet.

In addition to wood, polystyrene, concrete, floor coverings, the product glues plaster, leather, polystyrene foam, and porcelain stoneware.

• To lay tile blocks and porcelain stoneware, you need to choose tile adhesive.
• Assembly adhesive is used when installing plastic windows.

• Liquid nails or a universal product can be used to secure mirrors, cabinets, and repair any other household items.
• Waterproof Titanium is used for sealing joints in the bathroom, kitchen, and when processing seams.

The universal composition of the adhesive makes it suitable for use both inside and outside the building.

Properties and technical specifications

Properties depend on the components included. Universal transparent adhesive Titan has the following characteristics.

When the seam dries, it can withstand strong mechanical stress. After crystallization, it does not become brittle and does not delaminate. The composition of the glue allows it to be used in rooms with any level of humidity. Since the toxicity of the product is minimal, it is safe, but you still need to use it in a well-ventilated area.

Most varieties of Titan look like PVA, but there are also clear, colorless mixtures.

The mounting tool Titan is an analogue polyurethane foam. Has the same appearance. Unlike foam, glue does not have secondary expansion. That is, polyurethane foam shrinks after the initial expansion, while Titan expands for the first time, but does not shrink further.

Titanium dries in an hour, but the maximum strength of the seam is achieved only after a day.

For reliable bonding of porous surfaces, the composition must be applied in two layers. A completely dry seam is not exposed to sunlight or temperature changes. After complete crystallization, the seam remains elastic, waterproof, and strong.

Varieties

A universal composition is used everywhere. Besides it, there are other modifications, for example:

• sealant Titan;
• glue-mastic;
• Tytan Professional PVA D3 for wood and other analogues.

Universal glue

Titan SM universal glue is used to connect PVC, ceramics, leather, wood, carpet, parquet, and other floor surfaces. It glues polystyrene foam well, so it is often used as ceiling glue for attaching ceiling tiles. The mixture should be applied in a thin dotted line to the back of the tile, then wait a few minutes and gently press it to the ceiling. It is available in tubes with a thin spout, so it is convenient to apply even a very thin layer.

The universal composition is colorless, so the seam becomes barely noticeable after drying. It does not allow moisture to pass through and does not lose elasticity either at low temperatures up to -30°C or at high temperatures up to +60°C. The crystallized seam is not susceptible to direct sunlight.

Complete hardening of the seam occurs after 40 minutes, its maximum strength is achieved after 24 hours.

The universal epoxy adhesive Epoxy Titan is popular. This is a two-component adhesive that consists of a resin base and an amine type hardener. Bonds metal surfaces, plastic, wood, porcelain, concrete, ceramics, and other materials. Used as a sealant, as a leveling mastic, to seal cracks, pores, and holes. After crystallization, the seam retains its properties at temperatures from -40 to +100°C, it does not conduct electricity, is not susceptible to aggressive environments, and is resistant to vibrations and loads.

Adhesive foam Titan

Adhesive foam “Titanium 60 seconds” works on the principle of polyurethane foam. When exposed to air, its composition polymerizes in no more than 60 seconds. Upon contact with moisture contained in the atmosphere, CO2 is released, which swells the polymer. This is how foaming occurs.

It can be used to install windows, doors, wall panels, sand-lime brick, gas silicate blocks, ceramic tiles.

Adhesive foam increases the adhesive properties of porous substrates. It is used sparingly and seals cracks and potholes in surfaces. Maximum adhesion to the surface after 2 hours. Operating temperature should not be lower than -10°C.

Glue mastic

Titanium mastic is used for gluing ceiling skirting boards, plates, decorative elements, polystyrene foam, polyurethane, expanded polystyrene. The mixture adheres well to concrete, cement, gypsum, wood, and plywood substrates. Mastic can be used to glue fiberboard. Styrofoam mastic can be used to level bases, seal cracks and defects before installing polyurethane objects.

The mastic in its frozen form is resistant to low temperatures and UV light. It contains no solvents or toxins, which means it is safe.

Before applying the composition, the surface must be cleaned and degreased. The mastic is applied with a spatula at an operating temperature of at least +8°C. The initial setting of the mixture occurs after 15-20 s. During the first 10 seconds, the position of the bonded surfaces can still be adjusted. The seam dries completely in 12 hours.

Liquid nails Titan

Tytan Classic Fix assembly adhesive is available in tubes of 0.2 and 0.31 liters, equipped with a mounting gun. The mixture has White color and a thick, paste-like consistency that, when hardened, replaces nails or screws.

Classic Fix is ​​suitable for gluing metal, PVC, wood, cork, and plaster surfaces. They are used to glue tiles, bricks, polystyrene foam, polyurethane, and cement. Polyethylene, polypropylene, wet surfaces cannot be glued. It must be applied in a thick layer to the surface to be treated. If excess appears, remove it with a sponge. The initial contraction will occur a quarter of an hour after application. The seam will be super strong, resistant even to very low temperatures.

Powder

The product in powder form is suitable for wallpapering. The composition has disinfecting properties. It prevents the development of mold and mildew. The initial setting of the adhesive seam occurs after 5-10 minutes, which allows you to adjust the location of the wallpaper directly on the wall. You can use vinyl, non-woven and paper wallpapers on powder Titanium.

Before use, the powder must be diluted with water until a homogeneous mass is formed.

Afterwards, the composition can be applied to the wall if non-woven wallpaper is being glued, or to the back side of the wallpaper when gluing other types of wallpaper. The paste should be applied from the center of the canvas to its edges. After application, it needs to be given 5-10 minutes to set on the surface. When diluted, the composition can be stored for a maximum of 1 month.

Classification by composition

View	Description
Rubber compound	The entire Titan Professional line is rubber-based. Such mixtures glue wood, chipboard, tiles well, plastic skirting boards, baguettes. They tolerate temperature changes and heavy loads well. Their seams are strong and elastic. The series includes “liquid metal nails” on which mirror or glass surfaces. Liquid nails "Titanium 601" are also produced on the basis of rubber. They are used for finishing and insulation work, for gluing cornices, panels and sockets.
Polyurethane glue	Styro has a polyurethane based composition. They can glue bitumen, mineral wool, thermal insulation boards, carry out roofing work. Polyurethane compounds have disinfecting properties. Prevents the development of mold and mildew.
Acrylic mixture	Titan Express belongs to this type. They can be used to glue stones, trees, ceramic and glass bases. Hardens quickly. Suitable for urgent work. On acrylic base The product “Stucco Decor” is also produced, which attaches cork, glass, and any decorative items to the interior.
Polymer glue	More often it is recommended to use it for gluing amalgam, alloys, fiberglass, and other materials, when working with which it is important not to damage the surface being glued. The mixture can be used to glue insulation, ceramic tiles, moldings, and used as sealants. It is waterproof and UV resistant.

Instructions for use

The easiest to use is a polyurethane-based composition. It dries quickly and is easy to apply. When working with any adhesive mixtures, it is necessary to ventilate the room.

When using Titan, drafts should not be allowed, as they affect the drying rate of the composition and deteriorate the quality of the adhesion.

1. The foundation is being prepared. The surfaces to be pasted are cleaned of dirt and dust. The old falling off coating is removed with a spatula. Holes, cracks, and other defects are covered with plaster or mastic. Metal and plastic surfaces are sanded, degreased, and primed. Next, you need to wait until the surfaces are completely dry.
2. If you need to glue complex or large surfaces, then Titanium is applied to both sides. When gluing small bases, the product is applied to one of the surfaces. If tiles are glued, the mixture is applied in the form of a snake. After application, both surfaces are pressed against each other. For better fixation They need to be held with your hand for at least 1 minute. The ceiling tiles need to be held in place for the same amount of time. Glued parts and surfaces must be left alone until completely dry.
3. The adhesive mastic is applied with a spatula. If the base is small, then the product is applied pointwise. At large sizes The surfaces to be bonded must be applied using a continuous method. Liquid nails are applied with a glue gun in the form of waves or stripes. Such compositions can be used on uneven surfaces, with differences and flaws.

If, after gluing, drips and excess mixture appear, they must be removed immediately.

How to dilute Titan glue

If Titanium has thickened, it can be diluted with medical alcohol, alcohol-containing disinfectant liquids or denatured alcohol. Acetone will also work, but in too large quantities it can dissolve the glue.

If acetone is used to thicken the composition, and not to remove stains, then you need to adhere to the mixing ratio of the components. For four parts of thick Titanium you need to take one part of acetone.

This dilution method is very risky, since if the proportions are violated, the strength characteristics of the composition may change.

The powder is diluted with water. No additional solvents are needed. A more liquid consistency of the composition will lead to its better penetration into pores and minor surface defects, but the drying period of diluted Titanium is significantly extended.

If thickening occurs in tubes, it is no longer possible to return the normal consistency due to the sealed form of the packaging. Such problems with formulations in tubes occur only after their expiration date.

How and with what you can remove glue

Streaks of even transparent, dried Titanium are very visible in the light, so they must be washed off before the seam has completely hardened. The method by which the composition is wiped off depends on the type of surfaces being glued and on the time since gluing.

• It is necessary to remove glue from porous and soft surfaces, such as polystyrene foam, while it is not yet dry. This can be done with a damp cloth or sponge.

• You can also remove glue from hard and low-porous materials in a dried state, when it can be easily removed by hand. If the product has stuck strongly, you can pry it off with a spatula. This is usually how excess mixture is removed from the ceiling.

If you need to not only scrub, but also clean the surface from traces of glue, it is better to use solvents. Such products are produced by the same companies that produce the adhesive composition itself. At home, you can wash it with organic solvents such as acetone and white spirit. It is removed from clothing when it is completely dry, then pieces easily break off from the fabric and can be removed by hand without outside help.

Price

The cost of Titan will depend on its type and volume.

• Half a liter of universal composition can cost 100-220 rubles.
• For a liter you need to pay from 210 to 270 rubles.
• Small containers of 0.25 liters cost from 32 to 50 rubles.

• For adhesive foam you can pay from 300 to 800 rubles.
• Liquid nails cost 100-450 rubles.
• If a glue gun is included, the price will be higher.

Titan glue is an effective composition that is very popular and is actively used in the construction industry. There are several varieties of this adhesive substance, which are used in almost all construction work.

Kinds

The glue formula has universal properties.

• The peculiarity of this composition is that it works excellently with the main materials used in construction, namely plaster, gypsum and concrete.
• This composition is actively used during installation PVC boards on ceilings and walls.
• The glue tolerates heavy loads well, it has a good elasticity coefficient and does not become brittle after hardening.
• It can be used in high humidity and elevated temperatures.
• It dries up in a short time, and the consumption is economical.

Titan glue interacts well with materials such as:

• leather;
• paper;
• clay;

• wooden elements;
• linoleum;
• plastic.

The price for Titan glue of various modifications is as follows:

• Wild 0.25l/97 costs about 34 rubles;
• Euroline No. 601, 426 g - from 75 to 85 rubles;

• universal 0.25l – 37 rubles;
• Titan 1 liter – 132 rubles;
• Titan S 0.25 ml – 50 rubles.

An important point is that the glue does not “phonite”, it is safe from an environmental point of view, and does not generate harmful substances to human health. chemical compositions. The glue is applied in a thin layer through a special device, dries within 60 minutes and the seam remains almost invisible. For tilers, for example, who install ceiling blocks, Titan glue is a great help in their work.

You can often find this adhesive composition when performing the following types of work:

• installation of drywall;
• decor with PVC plates;

• installation of skirting boards on the ceiling and floor;
• sealing joints;
• roof insulation.

There are a number of varieties of Titan glue.

• Titan Wild is a particularly popular moisture-resistant option that tolerates temperature changes well, dries quickly, and provides a strong connection. It is often also mixed with denatured alcohol and used as a primer.
• Titan SM effective for PVC installation plates, especially for extruded polystyrene foam. It is available in 0.5 liter packs. Titan SM is often used when installing mosaics, parquet, linoleum, ceramics and wood.
• Classic Fix is a universal adhesive that can work in large temperature ranges (from -35 to +65 degrees). It dries for two days. The finished substance is a transparent seam. It is forbidden to use the composition for PVC boards and foam rubber.

• Styro 753 is a substance that is intended for PVC boards. It is characterized by low consumption, one package is enough for 8.2 square meters. m. It is ideal for installing façade thermal boards and interacts well with the main building materials, such as metal, concrete, brick and has antiseptic qualities.
• Heat-resistant mastic Titan Professional 901 Liquid nails have universal properties. It is suitable for working with all materials, especially widely used in floor works indoors. It does not absorb moisture. Its cost is from 170 rubles per package of 375 g. Titan Professional 901 glue is one of the most popular compositions, which is suitable for elements such as profiles, plastic and metal panels, skirting boards, chipboards, platbands, moldings. It has good resistance to changes in humidity and temperature conditions.

• Titan Professional (Metal)- These are liquid nails that are suitable for gluing mirrors. When packaged in 315 g, the cost of the product is 185 rubles.
• Titan Professional (Express) Suitable for working with ceramics, wood and stone elements. You can treat skirting boards, baguettes and platbands with this composition. It has a fast setting. The cost ranges from 140 to 180 rubles per 315 g package.

• Titan Professional (Hydro Fix) It is based on acrylic and has excellent water-dispersion properties. It is colorless, resistant to high and low temperatures. A tube of 315 g costs 155 rubles.
• Titan Professional (Multi Fix) It has universal properties, glues glass and mirrors well. It is colorless. Its packaging is 295 g and the price is 300 rubles. The glue is also produced in 250 ml containers.

Specifications

Titan polymer universal adhesive has excellent adhesion. It actively interacts with basic building materials, is resistant to high temperatures and sunlight, has good elasticity, and dries quickly.

The substance does not contain toxins, so using Titan glue is simple and safe.

The main characteristics of Titan glue are as follows:

• environmental Safety;
• good thickening;
• high adhesion coefficient;
• short hardening time;
• good resistance to mechanical loads;
• high transparency;
• versatility.

Instructions for use

Work with glue takes place in sealed rooms without the presence of active air exchange. Such requirements are necessary, because they guarantee that the gluing will be complete. The instructions included with the product indicate optimal modes using Russian Titan glue. Various modifications of Titan glue make it possible to select the composition that is necessary for a specific job.

The glue is consumed economically, so one package can successfully replace many other compounds.

• applied only to a degreased surface;
• the layer should be even and thin;
• After application, it is recommended to wait five minutes until the glue dries, only then connect the surfaces;
• at least two layers of glue should be applied to the porous surface;
• You can dilute the adhesive composition to the desired thickness using a solvent;
• For ceiling installation work, Titan is used in a dotted or dotted manner, which allows it to be used more economically.

Before starting work, the ceiling plane is carefully prepared; without this stage it will be impossible to obtain high-quality results. The ceiling must be smooth, without obvious differences or defects, otherwise the material will not be able to attach well. If there is a difference of 1 cm per 1 sq. meter, it is recommended to think about other types of finishing, such as suspended ceilings or plasterboard.

Often removed from the ceiling old paint or plaster is impossible. In this case, the seams between the slabs are sealed cement mortar. The plane is treated with a good primer, for example, Aquastop or Betakontakt. If the substance is too thick, you should add white spirit to it to better dissolve. A layer of primer will ensure better adhesion of the glue to the surface.

If Titan has thickened, it is best to dilute it with white spirit or alcohol. A well-diluted composition penetrates better into surface micropores. Seams usually take longer to dry, which should be taken into account. It takes at least a day for the seam to harden well. Area processing adhesive composition occurs using a spatula.

It is important that the layer is not thick and distributed evenly over the surface.

Within a few seconds after application, the tile is pressed against the ceiling, after which there is some time to straighten it if necessary. When removing glue residues, usually use an old rag soaked in water. While the glue is “fresh”, it is easy to wash it off, and there is also a chance to clean clothes without any consequences. It is worth noting that the shelf life of the glue is one and a half years.

When working with this composition, you should use goggles, gloves and closed work clothing.

Titan glue has a very wide range of uses. This fact is explained by the excellent technical parameters means: it is able to provide a strong connection for finishing materials made of foam and glaze, wood, PVC, leatherette and much more. This adhesive is also used for fixing various finishing materials to surfaces made of concrete, cement or gypsum. Titanium glue: application, characteristics, instructions - more about this.

Main characteristics

1. Can be used for both external and internal work;
2. Suitable for almost all materials;
3. Ideal for gluing expanded polystyrene;
4. Incredibly economical;
5. The seam is characterized by increased elasticity and water resistance;
6. Has no color;
7. The product is ready for use;
8. Does not contain any solvents harmful to human health;
9. Does not change its elasticity when climate conditions change.

Mode of application

If you use Titan Wild universal glue, significant savings Money. This is because its use cases are quite varied. One package of such a product will replace many other products necessary for construction and repair:

1. Titan glue is applied exclusively to a flat, pre-degreased surface. The layer should not be thick, otherwise it simply will not be effective;
2. After application, the product is allowed to dry for 2-5 minutes;
3. After this, the surfaces to be glued are connected, as shown in the photo;
4. Titan glue will dry completely in less than an hour, and the adhesive seam will become strong within 24 hours.

Application Features

• In the case of a porous surface, the glue will need to be applied in two layers;
• When installing ceiling tiles, the product must be applied in small intervals;
• Never use the product on a whitewashed surface. Before applying Titanium glue to such a surface, it must be cleaned of whitewash and thoroughly primed with a mixture of glue and denatured alcohol.

Sometimes, upon completion of repair work, you can notice minor defects in the form of a peeled off corner of a tile, wallpaper or linoleum. Such defects can be eliminated using Titan glue, as shown in the photo. At the same time, rest assured that this will not happen in the future, since this product is highly effective.

Efficiency

Often, installation adhesives have restrictions for use in rooms with high levels of humidity or temperature changes. However, all this does not apply of this material. It is characterized by increased moisture and heat resistance, so it is often used instead of sealants. The seam it leaves will be thin and transparent, while it will retain its parameters over a significant temperature range.

Let's sum it up

Thus, the main advantages of Titan glue are its characteristics such as resistance to changes temperature regime, versatility of use and high adhesion. In order to work with this tool you do not need any special skills. You just need to carefully read its instructions for use. All this explains the wide popularity this tool in industrial and private construction.

01.20.2010
Attention, fakes!

Unfortunately, cases of counterfeit products from unscrupulous manufacturers appearing on shelves have become more frequent. This also affected our TITAN Wild glue.

At first glance, the packaging of such a fake does not differ from the original...

News 1 - 3 of 9
Home | Prev. | 1 | Track. | End | All

TITAN Wild - find out more about our universal adhesive

Laconic but stylish packaging design, safe material, 100% reliable gluing, versatility - this is how Titan Wild assembly adhesive can be described in a few words. Moreover, this is only a small fraction of all the advantages.

High-quality assembly adhesive - strong adhesion

The renovation is completed, the soul sings, the eye rejoices, but a year passes, and problems are revealed one after another: the wallpaper has peeled off, the ceiling tiles have come off, the linoleum has lifted up at the joint.. Who will like this? The answer is obvious. Using Titan glue you can be sure that the material will be reliably glued in just a few min and forever!

TITAN is an indispensable assistant in repairs and at home

Convenient glue - universal glue

In the end, universal glue - great way saving the family budget. There is no need to spend money on ceiling glue (glue for polystyrene foam), glue for PVC (plastic), glue for linoleum, wood and parquet glue. Instead, you can buy just one package of TITAN Wild, using it as a construction adhesive suitable for all non-inert materials.

Construction adhesive must be reliable

Manufacturers TITAN Wild took into account all the features of the conditions in which universal glue can be used. Large wet, low or very heat air, straight sun rays- all this has no effect on the material. After all, TITANIUM is a heat-resistant and moisture-resistant polymer adhesive. After all, it can even be used as a sealant. Titanium retains its elasticity in various climatic conditions (from -30 to +60 degrees Celsius), and when gluing it leaves a transparent invisible seam.

Ease of use is a plus construction adhesive

Manufacturers Titan Wild made sure that handling assembly adhesive Titan was simple and convenient. One turn of the cap and the sealed package opens smoothly. One press and a thin layer of glue is squeezed onto the surface through the dispenser. Two layers must be applied to the porous surface. On ceiling tiles, one layer applied in a dotted pattern is sufficient. Drying time is no more than 30-40 minutes.

Where to buy TITAN Wild universal glue?

Retail: construction markets, hardware stores, construction markets, etc. in almost any city in the Russian Federation.

Product characteristics/application:

Designed for general construction and repair work. The scope of application of the glue is the widest range of non-inert materials. Capable of gluing products made of expanded polystyrene (polystyrene, foam plastic) and PVC (plastic), glaze and ceramics, wood and cork, MDF, artificial leather, glass, paper and fabric, as well as parquet and parquet board, linoleum, plywood, carpet, etc. floor coverings and so on. Used for gluing different combinations, as well as for gluing materials to concrete, cement-lime, gypsum, plaster surfaces.

Mode of application:

Apply a thin layer of glue to a clean and dry surface. Leave for 2-5 minutes to dry, then connect the surfaces to be glued. Cover the porous surface with glue twice. When gluing ceiling tiles, the adhesive is applied in a dotted pattern. If the base is covered with whitewash, it should first be removed and primed with glue mixed with denatured alcohol. After 4 hours of drying of the primed surface, you can begin gluing the tiles. The glue drying time is approximately 30-40 minutes.

Basic properties:

• frost-resistant;
• has a transparent color;
• waterproof - resistant to moisture;
• heat-resistant - stable flexibility in the temperature range from -30ºС to + 60ºС;
• has a short setting time, ideal for gluing ceiling tiles;
• remains flexible, does not peel off, does not become brittle;
• glue consumption: 0.5 l per 10 sq.m.

Compound:

Vinyl acetate copolymers

Package:

Plastic bottle. Packing in cardboard box. Options:

For industrial/production purposes it can be supplied in containers of any volume.

Best before date:

Precautionary measures:

Keep away from children! In case of contact with skin or eyes, rinse thoroughly with water and see a doctor if necessary. Should be used in rooms with good ventilation. Do not use in enclosed spaces if the glue consumption exceeds 100 g per 1 sq.m. surface to be pasted.