Painting interior doors allows you not only to update the interior and give it freshness, but also to protect the door from negative impact external factors. When choosing paint for interior doors, you should keep in mind that the painted surface should be both practical and pleasing to the eye.
What paint to paint interior doors
The market offers a wide selection of tints, impregnations, paints and varnishes that can be used to paint doors. Paints are especially popular water based. They are safe, environmentally friendly, relatively inexpensive and durable. This enamel can be of several types:
- Water-emulsion (water-dispersion)
Most often, after such painting, the door is covered with transparent varnish. Water-based paint doesn't have unpleasant odor, dries quickly, costs little. Most manufacturers produce water-dispersed white paint for interior doors, and the user decides on the color himself by adding the appropriate dye.
- Acrylic
Again, water-based enamel is usually applied in 2-3 layers; it penetrates the MDF very quickly and is absorbed. Before applying acrylic enamel to the surface, a primer will not be superfluous. MDF doors. Quick drying acrylic paints dry in 10-12 hours, and complete drying takes no more than two days.
- Thermal enamel based on water
The significant advantages of such paint are long service life and good retention. original color. Even under the influence of external negative factors, the paint does not lose its attractiveness. Moreover, the interior door can be fully used within an hour after painting is completed. The smell of thermal enamel is barely perceptible, so this should not interfere with painting the door.
- Nitropaint
A very durable paint that has a characteristic shine and, unfortunately, a toxic odor. Nitro paint fumes should not enter the respiratory tract, therefore, if such enamel is used, it is important to paint the doors in full compliance with safety precautions.
- Interior paint
Interior paints in most cases are acrylic enamels with the addition of special components that allow the painted object to maintain an attractive appearance for a longer time. The advantage of interior paint is the absence of a pungent odor. You can paint a door with this paint in a matter of minutes; odorless paint for interior doors dries very quickly.
Procedure for painting a door
Before starting work, interior doors must be prepared for painting. You should stock up on rollers, sponges, paints and brushes. If the old coating on wooden doors cannot be removed by usual means, you will need a special chemical solution. The order of work is approximately as follows:
- The door is removed from its hinges. It is better to fill the recesses for the locks with cotton wool or a rag to protect them from getting into paint coating inside.
- Apply to the old coating special solution to remove paint. You can apply the solution
using tampons, then leave for half an hour for the product to take effect. Best option– technical carbolic acid. - After half an hour, the door should be rinsed with water and allowed to dry thoroughly (this takes 3-5 hours).
- The next stage is to repair cracks, chips and other surface effects. To do this, putty is used, which should be evenly applied to the surface. It is important that the putty dries well. Putty can be purchased in any color, taking into account the future color of the wooden doors.
- After drying, the door is treated with sandpaper and drying oil.
How to paint a door correctly
To paint interior wooden doors you will need the following tools and materials:
- Paint and container for it;
- Brushes of several sizes (depending on the dimensions of the door and its relief), rollers;
- Special masking tape;
- Protective material that can be placed under the door;
- Gloves, sandpaper.
Armed with the above things, you can safely begin the process itself. It is best not to reinvent the wheel, remove the door from its hinges and place it in a horizontal position on flat surface. Painting in a horizontal plane will avoid unwanted paint drips.
Before painting, the fittings must be removed or sealed with special masking tape. Glass inserts(if any) also need to be protected with masking tape.
Depending on the door surface, it is more convenient to paint the door with a roller or brush. If the door is smooth and has no recesses, you can use a roller. This approach allows you to finish painting faster, and the paint will lay down in a more even layer than when applied with a brush. Availability decorative elements leaves no choice - you have to use a brush.
It is recommended to start painting the door from the upper left corner, applying paint in small sections from left to right. The first step is to process the recesses on the surface of the door. After the main part of the door is painted, you can move on to working on the ends. After completing the work, you must immediately remove the masking tape without allowing the paint to dry. Otherwise masking tape may strip off the uniform color.
Sections of the article:
Thanks to modern innovative materials, you can give an old wooden door a completely new look. new look, corresponding fashion trends. This is easy to do yourself at home. The main thing is to follow the technology. In this article we will talk about how to paint wooden door and what materials and tools will be needed for this.
Before staining
When the door is still new and has not been painted, you need to decide whether to leave the natural beauty of natural wood visible or cover it with a continuous opaque layer of paint. How exactly to paint a wooden door - the choice of materials for work will depend on this decision.
Paint selection
If you decide to save natural color wood - no need to buy paint. In this case, you will need an oil impregnation or clear varnish. They refresh the color of wood well. Add new ones to the array color shades Tinted varnish or stain will help.
If you want to update an existing varnished surface, you need to purchase putty to match the color of the solid wood. It is useful for leveling the surface of the door leaf after removing the old varnish.
For opaque painting of wooden surfaces, there are many options for enamels: alkyd, oil, polyurethane, acrylic, perchlorovinyl. To paint bath doors, it is better to choose polyurethane paint: it is highly resistant to negative external influences.
What is the best way to paint interior wooden doors? Experts recommend that non-professional craftsmen choose water-based acrylic paints. They have the optimal consistency for working with a brush and spread well. Such paints have high water-repellent qualities, good drying speed and resistance to temperature fluctuations.
Selecting Tools
For painting you will need a narrow file brush and a roller. A brush is used to paint the paneling and all kinds of decorative slats on the door. The roller is useful for painting large and even surfaces of the door leaf. You can purchase a paint sprayer, but it is advisable to have some experience working with it. In addition, it is unprofitable to purchase this tool to paint one or two doors.
Coloring
Those who have seen how a craftsman paints wooden doors may think that there is absolutely nothing complicated about it. However, for a beginner to achieve good result, all instructions and work procedures must be strictly followed.
It is important to learn how to paint doors evenly, without the formation of frozen smudges or stains under the varnish.
Often coloring is carried out in several stages. First, impregnation is used; it can be with or without a tinting effect. After this, a decorative coating is applied.
How to paint a wooden door without applying paint products? In this case, impregnation or stain must be applied in at least three layers in order to maximally protect the surface from external influences. More layers are applied to achieve the desired color shade.
Don't forget that the jambs with lintels also need updating. Preparation for painting them is carried out in the same sequence and with the same tools as for the door leaf. Since it makes no sense to dismantle and take the door frame outside before painting, it is important to take care of the protection flooring from ingress of paint, and also provide access to fresh air into the room for quality ventilation.
Products applied to the surface may be incompatible. For example, a door that is varnished cannot be impregnated with drying oil. In this case, only stain will do. It is also important to remember that all alkyd resin based paints can only be applied to a dry surface, otherwise the paint will peel off.
Preparing the door leaf
To paint the door as efficiently as possible, remove it from its hinges and lay it in a horizontal position on a trestle, two stools or a work table. Position removed door best in the fresh air. This way it will dry faster and there will be less paint smell in the living room.
If it is impossible to remove the door for some reason, you need to block the panel with wedges so that the panel brush can easily reach all the necessary elements of the door. This is also necessary to ensure that the door does not accidentally close before it is completely dry.
It is advisable to dismantle the fittings. If this is not possible, tightly cover the handles and hinges with metal foil. Fix the locking mechanism in the “open” position and seal it with tape.
Surface cleaning
For those who are not professional painters, one of the most important issues How to properly remove old paint from a wooden door? The question is really important, because the final result will largely depend on the quality of this process. Therefore, it is worth paying attention to preparing the door for painting special attention.
Before new paint It is necessary to remove all old layers of paint, primer and putty from the surface of the door down to the wood itself. This work is quite easy to do with a grinding machine. A more labor-intensive method is to use homemade device, consisting of a bar of a shape convenient for the hand and glued to work surface medium grit sandpaper. The most effective is to use a hair dryer. It heats the paint, after which it is easy to remove with a spatula. Another way is flushing old paint by special means. It is not complicated, but it is expensive - such tools are not cheap.
Grinding
After this, an initial sanding is carried out, which eliminates small dents, scratches and paint residues. Here you can also use grinder or medium grit sandpaper.
Next, the surface is leveled with putty: large dents, cracks, crevices, etc. are covered. Deep dents can be filled with auto filler, which does not contain fiberglass. It is important not to forget that under the transparent coating, putty is selected to match the natural wood grain.
After complete drying, secondary sanding is performed. First, an abrasive is used as in the previous stage, then a fine-grained analogue is used. The treated surface must be vacuumed, wiped with a damp cloth and dried well.
Sometimes, after removing the old paint, you find that the wood still looks good enough that you don’t need to apply an opaque coating to it. In this case, it is recommended to bleach it with a mixture of chlorine bleach and water in a ratio of 1:3, dry it well, and then varnish it.
Coloring
To understand how to properly paint a particular wooden door, it is important to understand its structure. The most common types of doors for painting are panel doors (completely smooth) and panel doors (with recesses and possibly slats). The panel door should be painted correctly in three steps. It is better to use a roller, it ensures uniform application and does not leave hairs.
Painting techniques
You need to start from the upper left corner of the door leaf and head to the right. Follow this direction until the end of painting, then dry according to the instructions on the paint. The second time, coloring is done in the longitudinal direction. The last painting begins in the upper right corner, opposite the first painting step.
They begin to paint the paneled door with a brush. Before starting work, you need to fluff the brush so that all loosely attached hairs fall out without getting into the paint. All recesses in the canvas are painted with it. It is important to ensure that there is no excess paint. After this, the roller comes into operation and painting is carried out in accordance with the above technological steps for the panel door.
Staining
How else can you paint an interior wooden door? If you paint with stain, then the door prepared for painting must first be slightly moistened. In this case, the dye, which has a liquid consistency, will lie smoothly.
The first application of stain is carried out along the fibers, the second - in the transverse direction, the third is similar to the first. If the canvas is not removed from the hinges, you need to start painting from the bottom so that drops of dye do not fall on unpainted areas, otherwise it will be difficult to achieve an even tone. The same goes for door frame. This is important for preparing the surface for varnish or other transparent coating. If the doors are eventually coated with an opaque composition, occasional drops of stain will not harm the final finish. appearance doors.
Water-soluble stain allows wood fibers that have absorbed moisture to straighten out. To ensure that the surface of the doors remains smooth, after the first layer has dried, the doors are sanded with sandpaper, then cleaned of dust and covered with stain a second time. Wooden surface when applying dye to it, it is several tones darker than the dried one. This must be taken into account if you want to achieve a specific color shade.
Alcohol stain does not stimulate fiber straightening, so there is no need to sand the doors after applying it. This stain dries very quickly, but water-soluble stain is considered safer.
Wood imitation
If desired, you can paint to imitate MDF or plywood doors under natural wood. There are several ways to decorate this way.
Option one
The door leaf is painted with light gray, light beige or yellow paint and left until completely dry according to the instructions of the manufacturer of the coloring composition. Using a wide brush, the entire surface of the door is treated with liquid soap. A layer of darker paint is applied, and the protruding surface liquid soap washed off.
Option two
To do this you will need a special brush, which can be purchased at any hardware store. This brush treats the soft fibers of the door covering. Then the surface is painted with two different colors (like wood) with dyes. Changes in the structure of the canvas made by the brush will spontaneously give curls, creating the illusion of wood.
After complete drying, the surface is sanded and varnished. Furniture can also be restored in a similar way.
Carrying out such work will not be too easy, so it is recommended to first practice on another similar surface, and not on the door itself.
When installing new wooden doors in a bathhouse, you should immediately take care to protect them from negative influences. Steam, high temperature, drafts from ventilation contribute to the deterioration of wood, its deformation and loss of visual appeal. Painting the doors will help you avoid this - a simple and effective method. The most important thing is to choose the right paint and apply it correctly.
Paint and varnish products are classified as follows:
- by type – varnishes, paints and impregnations (oil, wax, stains, penetrating and film-forming);
- By chemical composition– organic and water based;
- by method of application - internal, external and combined;
- in terms of protective effects - from temperature and humidity fluctuations, from mechanical damage, from chemical and organic irritants.
In addition, all coatings are divided into transparent and opaque. The first includes varnishes, glazes and oil impregnations, the second - paints and enamels made on acrylic, alkyd, polyurethane and oil bases.
| Type of wood processing compound | Basic properties |
|---|---|
| Suitable for painting interior and exterior doors, has high moisture resistance. Transparent, emphasizes the structure of the wood. Disadvantage: long drying time. | |
| Safe for health, suitable for any wood, quick-drying. Provides high protection from ultraviolet radiation, gives the surface increased resistance to dirt and moisture. | |
| The most harmless to health, non-flammable, used indoors. Not suitable for external doors. Preserves the natural texture of wood and its original color. | |
| Easy to apply, penetrates the wood well, gives the wood a more dark shade. Used for treatment before painting. | |
| Penetrates deeply into wood, perfectly protects against moisture, fungus and dirt. Gives additional strength and a pleasant shine to the surface. | |
| Suitable for outdoor and internal surfaces, creates a durable, dense coating with water-repellent properties. Has high hiding power with a glossy or matte effect. | |
| It is easy to apply, has low hiding power, thanks to which it preserves the texture of the wood. It has high breathability, so it allows the wood to “breathe”. |
Opaque paint for bath doors is used less often, since the natural grain of the wood fits more harmoniously into the interior. Traditionally interior decoration Baths are made of wood, so doors with a pronounced texture look better.
But if tiles are used to decorate the walls, you can make the doors plain by choosing the appropriate color.
When using paint it is required pre-processing surfaces with antiseptic impregnation and fire retardant if the door is in a steam room. It is advisable to choose all products from one manufacturer, this will improve their interaction and make the coating better.
The optimal choice for bath doors are alkyd-based varnishes and paints, the main advantage of which is considered to be resistance to temperature fluctuations and water resistance.
And one more thing: paint and varnish products should be purchased only in specialized stores where storage conditions are observed, especially temperature conditions.
Wood varnish prices
wood varnish
How to paint new doors
Untreated wood absorbs moisture well, and if new doors are installed in the bathhouse without impregnation protective compounds, they will very soon swell and stop closing tightly. Therefore, before installing the doors, they need to be properly prepared and painted. All work should be done indoors to prevent dust from getting on the paint.
Step 1. The door leaf without handles, hooks and loops is laid on a flat, stable surface. During the manufacturing process, the material was already amenable to grinding, but small roughness or protrusions could remain. Therefore, using a grinder or sandpaper, the doors are processed again on both sides and at the ends. Remove any uneven surfaces and wipe off any dust.
Step 2. If paint is chosen for the doors, the canvas is first impregnated with a primer. The recesses are treated first, then the flat areas. Since the doors are in a horizontal position, drips do not form and absorption occurs more evenly.
Step 3. Allow the surface to dry completely and treat it a second time.
Step 4. Now you can paint. For a panel door, a roller is more suitable; for a paneled door, use a narrow brush. The paint should not be too thick; if so, thin it with solvent. You should not apply the paint in a thick layer, as this will only reduce the quality of the coating. Depending on the coverage, you may need from 2 to 4 layers of paint, each of which must dry completely before applying the next.
Step 5. While the door dries, paint the opening. You cannot leave it untreated for the same reason as doors; besides, a painted door in an unpainted opening does not look very harmonious.
After the paint has dried, the hinges, handle, and hook are screwed onto the door and installed in the opening.
If stain is chosen for the door, no primer is used. The stain penetrates deeply into the wood, coloring the fibers and increasing protective properties material. There are several ways to apply stain, which give different results.
| Way | Description |
|---|---|
| Trituration. | This method requires a stain with for a long time drying. Using a roller, apply the composition to the door leaf and rub it thoroughly with a foam swab or a piece of thick fabric. You need to rub with force, centimeter by centimeter, so that the liquid penetrates well into the pores of the wood. The painted surface has a very pronounced pattern. |
| Spraying. | Choosing a stain light colors and using a spray gun apply 2-4 layers. This method of painting gives a less pronounced texture, but perfectly hides minor wood defects. |
| Regular application. | Suitable for smooth surfaces. The stain is applied using a roller, resulting in the surface being painted evenly and without streaks. |
| Staining with a brush. | The product is generously applied using a wide brush, first along the fibers, then across. Thanks to this method, the wood acquires a deeper and richer shade. |
Advice. To avoid discrepancies in color, stain should be purchased in reserve and mixed well in the jar before use. Coloring pigments tend to settle to the bottom, as a result of which when painting doors, one part may differ in tone from the rest.
Prices for stain
wood stain
Using oil or wax impregnation
Door processing oil impregnation also has its secrets. If applied incorrectly, streaks and darker areas may appear on the surface. Before use, the impregnation must be stirred very well, and this must be done several times during the work process. Apply impregnation in any convenient way - roller, brush, spray or foam sponge. The number of layers depends on the porosity of the material.
So, take a little product and distribute it evenly over the surface from edge to edge. It is more convenient to do this according to the width of the door leaf. Next, the impregnation is thoroughly rubbed with a brush or rolled out with a roller, avoiding sagging. The surface dries in 8 to 12 hours, depending on the composition and air temperature. The second layer is applied no later than 24 hours later, otherwise it will not be able to absorb well and its protective properties will decrease.
Wood impregnation prices
impregnation for wood
Painting old doors
Old doors in a bathhouse can also be revived and made no less attractive than new ones. Although this process is more labor-intensive, anyone can handle it. For convenience, the door must be removed from its hinges and laid horizontally, but if for some reason it cannot be removed, you will have to work this way.
Step 1. The door leaf is removed from the hinges and laid on a flat surface. Unscrew handles, hinges, remove locks. If you can’t unscrew them, wrap them with tape or foil.
Step 2. Using an abrasive attachment, remove all layers of old paint to the base.
If there are putty areas, the putty is also completely cleaned off. There's another one convenient way remove paint: top layer the coatings are heated with a construction hairdryer until the paint begins to swell, and then it is scraped off with a metal spatula.
Step 3. Sweep away pieces of paint and dust from the canvas, and then carefully sand the surface. IN hard to reach places It is convenient to use sandpaper. After sanding there should be no rough areas, small irregularities or scratches.
Sanding the door leaf
Step 4. Carefully inspect the door from all sides, check the tightness of the connections, and, if necessary, strengthen the frame with metal corners and screws.
Step 5. The resulting recesses and cracks must be repaired with new putty. Under alkyd paint The putty will work in any color, but it won’t show through anyway. If you plan to treat the surface with oil impregnation, wax or varnish, the shade of the putty should match the color of the door leaf.
Advice. If the wood has become very dark over time, you can bleach it a little: mix bleach with water in a ratio of 1:3 and moisten the surface generously. When it brightens, the door is washed well clean water and air dry.
Sanding dried putty
Step 8. Use a damp cloth to wipe off dust from all sides. Next, cover the door with an even layer of primer. Instead of a regular primer, you can use an antiseptic impregnation. Joints and recesses need to be treated especially carefully.
Step 9 For painting you will need a thin brush and roller.
When the primer has dried, take a brush and first paint all the jumpers, recesses, decorative overlays, panels. Next, using a roller, smooth, wide areas are painted.
The paint is applied in a thin and even layer, carefully rubbed in one direction. The second layer can be applied no earlier than the first has dried. In this case, the top layer is always applied perpendicular to the bottom one, that is, if the first layer was applied along the width of the doors, then the second one must be done longitudinally. It is especially important to follow this rule when using a brush that leaves strokes.
Step 10. Leave the canvas to dry and begin painting the door frame in the opening. It’s exactly the same here: use a thin brush at the joints, and a roller on smooth areas.
Wood paint prices
wood paint
If the door cannot be removed from its hinges, for convenience it is fixed with wooden wedges on both sides so that there is maximum access to all parts of the door. The wedges should be secured as firmly as possible, otherwise the blade may move during operation. All further actions are performed similarly. When painting, be careful not to allow drips to form. Handles and hinges, and other fittings should also be cleaned of dirt, sanded, and lubricated for ease of movement.
When treating doors with stain, it should be taken into account that splashes that fall on clean wood leave dark spots that are visible through 2-3 layers of dye. Therefore, if you are painting a door that has not been removed from its hinges, it is recommended to apply the stain very carefully and from the bottom up. The roller or brush should not be dipped into the liquid too much to avoid drips. A canvas with streaks and dark spots looks sloppy even under a layer of varnish.
From using water-based stain wood fibers tend to straighten, causing the surface to become rough. Sanding with fine-grain sandpaper will help eliminate such a defect. After secondary treatment with stain, the canvas remains smooth.
Video – Painting wooden doors
Video - Door painting technology
To paint wooden doors efficiently, you need to understand that this procedure does not involve saving time and material. All work must be carried out correctly from the beginning, in compliance with all stages. Only this position allows you to transform an old canvas or give the right type new details. All nuances must be calculated in advance to avoid unpleasant consequences.
To receive desired result, as well as to create a reliable and durable coating, it is necessary to choose the right paint for wooden doors. It should be noted that there are two main compositions that are used for such work - varnish and paint. In this case, both substances can be used together.
Each coloring composition has its own characteristics:
- Varnish. Currently there are several main varieties of this material: colored, glossy and matte. It should be borne in mind that such compositions do not hide surface defects. That is, the wood structure remains visible, which significantly limits the scope of application. Varnish is excellent option, when we are talking about new elements that do not have signs of preparation (putty, putty). If it is assumed that work will be carried out on finishing old doors, then varnish is used as protective coating, but is not the basis. It is important to pay attention to the composition of the material: it can be solvent or oil based. It is better not to use the first option for woodworking; it can cause damage to the wood.
Varnish is used not only to create decorative covering, but also creates a protective layer
Note! I advise you to choose many masters polyurethane varnish. It has sufficient stability and strength, which is very important feature for such events. - Dye. This composition is distinguished by the fact that it allows you to choose the desired shade that is suitable for specific interior. It is important to consider that painting a wooden door can be done with materials that give a glossy, matte or translucent effect. When choosing a paint, you should immediately decide on the composition of the material: the base should be oil or alcohol. Good decision can be considered nitro paint, which has excellent characteristics and makes it possible to paint the door in white. But it is important to consider that this composition has a pungent odor that dissipates in only a few days.
When choosing paint for a door, you need to make sure that the container with the material has the inscription “For wood”
There is another interesting substance - wax oil. This product allows you to give the surface a very interesting glossy (silk) shade. Oil formulations based on the troops have different shades, which allows them to be successfully combined.
Note! It is important to note that applying wax oil is not the easiest process. To achieve the desired coverage, you need to distribute the material correctly.
So what is the best way to paint an interior wooden door? There are many tips on this matter, but the most preferred material is considered alkyd enamel. This colorful composition is different excellent qualities, which are perfect for this type of work. Firstly, it is low cost. It is significantly less than other materials. Secondly, the substance lies quite evenly, which is necessary for home use. Thirdly, the paint is odorless and has a wide range of shades.
Alkyd enamel from different manufacturers The principle of painting wooden doors
Painting wooden doors with your own hands is divided into several stages, which are interconnected. It should be borne in mind that any negligence will immediately affect the final appearance of the wooden parts.
It all starts with preparation the right tool and materials. No special equipment is required to operate.
You need to purchase the following:
- Screwdriver (set of screwdrivers). It will be needed in order to remove all unnecessary details from the canvas.
- Sandpaper of different grits. The product is convenient to use if you install it on a block. It is possible to use a grinding machine.
- . You can make such a composition yourself.
- Primer. Used to increase the adhesion of materials.
- Spatulas. The work requires a small tool.
- Roller and brush set different widths. The roller should not be foam rubber.
Materials and tools needed to paint a door Note! To apply the paint and varnish composition, it is preferable to use a spray gun. It allows you to perform work in short term, distributing the material with the highest quality. But it requires special conditions for use. It is important to consider that purchasing such equipment for one-time work is irrational.
Preparatory stage
How to paint wooden doors with high quality? To truly achieve the desired coverage, special attention must be paid to the preparation process.
Note! Many people mistakenly believe that when buying a new one, unpainted door, no preparatory activities no need to perform. In reality, it all depends on specific situation, so you should check with the seller: what has already been done. But it would be much better to assess the situation yourself.
Painting a wooden door
After the previous manipulations have been completely completed, you can proceed to the main procedures. They are:
Interior doors are an important interior element. They not only delimit space and protect rooms from noise, odors, drafts and dust, but also emphasize their specific style, adding completeness and transforming the atmosphere as a whole. Therefore, if interior doors have lost their original appearance over time, then they must be put in order. Otherwise, even the most luxurious renovation will look unpresentable against their background. And painting interior doors will help with this.
Compared to completely replacing the door leaf, this is an event that you can easily do with your own hands and is very inexpensive. And you can achieve just as good a result with it if you do everything correctly and give free rein to your imagination a little. So, how to paint interior doors, what is needed for this and what color to choose for them? We'll look into all this further.
Choosing a shade for an interior door
An interior is considered ideal when all its elements, including interior doors, are harmoniously matched to each other. Moreover, there is an important principle in design - all doors should preferably be identical in color scheme, which creates a single, holistic picture in the house.
But, since it often different rooms are designed in separate stylistic and color directions, then, at first glance, you can immediately find “ golden mean The shade of interior doors can be difficult. In these complex cases, designers often focus on color scheme main rooms of the home:
- hallways;
- halls;
- living rooms.
And when this does not help, then the interior doors of all rooms outside (relative to the corridor) can be painted in one color, and from the inside of a separate room - in another. Also, to make the task easier, when choosing the tone of interior doors, designers advise paying attention to many details directly in each room:
- walls;
- ceiling;
- floors;
- baseboards;
- furniture;
- decorative items, including textiles.
For example, if the floors match the color and texture of wood, then they can be painted in identical shades. In general, it is believed that natural wood colors are universal solution for interior doors, since in this case they fit perfectly into almost any design, in perfect harmony with the floor, furniture, and decorative items.
For people who prefer bold decisions and originality, the color of such products can be selected to match the design of the walls. In this case, it is better to make the shade of the doors a tone higher or lower - this will allow them to be visually highlighted. As for light and dark variations, in the first case, interior doors will visually expand the rooms, creating a laconic, light atmosphere in them, and in the second, they will make the space more austere and restrained.
Selecting the type of coloring composition
All paints can be divided into transparent and pigmenting compositions. The first include varnishes, which are more suitable if wooden doors do not have serious defects and you plan to simply refresh them without changing color. But, since these interior elements are functional structures that are in constant use, due to this, noticeable chips, cracks and other flaws very often appear on them, spoiling the appearance.
Therefore, often for high-quality restoration of a door leaf, a simple coating of varnish is not enough. For these purposes, it is advisable to use pigmenting paints that can mask and eliminate more serious defects.
In addition to color, paints also differ in their composition. The choice of their type according to this parameter will directly depend on what the interior doors are made of. By paying attention to the table below, you can understand in which cases it is better to use one or another type of coating composition.
| Material of which the interior door is made | Recommended paint type |
|---|---|
| Array | Fully wooden products can be painted with almost any paint. For example, all oil-based products and alkyd enamel have worked well in this case. These materials come in a wide range of colors and, once dry, form a durable, durable coating. They have practically no drawbacks, except for the strong smell that is felt in the room for 3-4 days after painting the canvases. When you do a DIY restoration of interior doors in a house where there are children, it is, of course, better to use acrylic enamel. It is odorless, non-toxic, and dries quickly. But its main drawback is its fragile and short-lived surface. |
| MDF | It is advisable to paint MDF doors with compositions that simultaneously include tone and varnish (colored varnishes). Such paints help to preserve the texture of the material on such canvases and mask any existing defects. |
| Veneer | For veneered interior doors, it is highly not recommended to use nitro paints, since this composite material does not tolerate moisture. After applying such compositions, unsightly stains may form on them. It is better to paint veneer doors with polyurethane or glypthal compounds. They do not have a strong odor, so it is comfortable to work with them. As for the choice of color, according to this parameter they can be selected to suit every taste. |
| According to inherent characteristics | Anti-corrosion, moisture-resistant, heat-protective, antiseptic. |
| By place of application | Universal or separately for outdoor and interior work. |
Whatever paint is chosen, in any case it should be intended for interior work. Moreover, if in the room where the interior door is located there is strong moisture(kitchen, bathroom), then the compositions are certainly selected with moisture-resistant qualities.
Dyeing technology
In addition to purchasing paint, to restore interior doors you will need to prepare tools and additional building materials such as:
- sandpaper of medium and fine grain;
- wood putty;
- solution for removing old coating (20% technical carbolic acid, caustic potassium or sodium);
- sponge;
- spatula;
- cotton swabs;
- primer;
- construction tape;
- flat brushes of various widths;
- roller;
- paint container;
- ladder;
- screwdriver
After this, you can begin preparatory work so that the door is suitable for paint. This stage consists of the following steps:
After completion preparatory work door leaf must be completely ready for painting. This process itself includes the following steps:
Finally, it should be noted that painting interior doors with your own hands should be done in rooms with closed windows where there are no drafts and dust. If everything is done as described above, the doors in the house will look like new again. At the same time, their owner will not spend a lot of money either on craftsmen or on the paint itself, because the cost of these compositions of any type is now affordable to everyone.
