Do-it-yourself cold glazing of balconies, step-by-step instructions. How to glaze a balcony yourself

A balcony is a multifunctional space in an apartment. Over the past couple of decades, it has evolved from a storage room for winter clothes, grandma’s compotes and outdated items that you didn’t dare throw away, into a full-fledged part of the living space. Of course, this only applies to options closed type. If it is still blown by all the winds and is regularly covered in knee-deep snowdrifts in winter, glazing the balcony with your own hands will save the situation.

Species

A glazed balcony allows you to intelligently optimize additional square meters in the apartment, turning it into a study, mini-dining room, dressing room, sports ground, workshop for creative family members. You can set up a winter garden in it or equip an area for your favorite pet.

It is quite possible to do the glazing yourself, but you need to take into account some of the nuances of the work.

Firstly, it is important to understand the difference between a balcony and a loggia. Many apartment owners confuse these concepts, and yet the types of glazing for a loggia differ from the types of glazing for a balcony. Glazing a loggia is simpler, since it is bounded on both sides by walls - it is located “inside” the living space. A balcony is a structure protruding from the wall of the facade of a building. It “hangs” over the ground and is placed outside the main area.

Secondly, you need to decide on the glazing method - cold or warm.

The cold one consists of a single layer of glass and a lightweight frame. This method provides relative sound insulation, protects the room from dust, wind and sunlight if the glass is covered with a UV filter, but does not retain heat. It is suitable for arranging a summer kitchen on the balcony, a temporary bedroom or office, and in winter for storing food in the cold.

Warm glazing requires a more complex, heavy and reliable design. And more expensive. It consists of double-sealed window frames and double-glazed windows, which make it possible to maintain room temperature on the balcony at any time of the year and use it comfortably.

Installation warm windows requires more time and strict adherence to conditions:

Good thermal insulation and waterproofing. Condensation between the glasses is unacceptable; they will fog up and retain heat less well.
Possibility to provide natural ventilation of the room.
The presence of an air circulation system between the balcony and the room.

Thirdly, it is necessary to study the legal side of the issue when planning to make changes to the design of the premises. The balcony slab is designed for a specific load. Exceeding the permissible weight can lead to its collapse, and this is fraught with negative consequences.

Nowadays, it is quite easy to obtain specialist advice and permission to make improvements of a similar plan that were not provided for during the construction of the house. It's easier to spend a little time studying Housing Code before starting work, rather than solving problems after.

Popular types of glazing

The most common ways to protect a balcony from rain, wind, accumulation of street dust, frost and visits from feathered guests are: sliding glazing, panoramic, with extension, on a supporting frame.

Each type of glazing has its own advantages and disadvantages.

Simple (classical) glazing using a wooden frame and single glasses belongs to the cold method and is installed mainly in Soviet-type apartments. It protects from moisture, noise and street dirt, but is not particularly aesthetically pleasing or has great capabilities.

Sliding

The design is equipped with a special roller mechanism, which allows you to easily move the doors apart and takes up minimal space. The mechanism works on the principle of guide rails: the doors slide one after another.

This type is not suitable for every balcony; specialist advice is required, but for small balconies this is the best option. It doesn’t take up even half an extra centimeter, saves space, protects from insects, dirt and precipitation.

The negative aspects include the fact that roller mechanisms may not withstand the harsh conditions of the Russian climate in winter time year. If they freeze, it will become impossible to open the windows. The design involves single glass, so at sub-zero temperatures the room will be cold.

Panorama

This type of glazing implies the absence of any frame. Guides with grooves are installed along the top and bottom into which glass is inserted (using special fastening units). The glass fence occupies the entire space from floor to ceiling, opening beautiful view from the balcony at any time of the year. In this case, the sections are glazed in various ways: sliding, hinged, folding.

For panoramic glazing, special strength glass is used, with a special coating to neutralize thermal radiation. It looks beautiful and can provide maximum sound insulation. Has a number of disadvantages:

At high temperatures the glass glows and heats the room. Blinds must be provided during installation. During the cold season, it does not retain heat well.
The surface requires frequent washing, since dust is clearly visible on it, and water streaks are visible after rain.
The structure as a whole is much heavier and more expensive than any other material.
Installation involves risk and requires high professionalism, so it should not be done by yourself.

With removal

The essence of the method is that steel profiles are welded to the balcony parapet, onto which a wide window sill is fixed. It is the basis that holds the aluminum or plastic structure for glazing the balcony. This glazing is suitable for narrow and small balconies with a strong parapet.

Modified balconies look beautiful (especially if a greenhouse is placed in them), expand the space practically and visually, and have a functional wide window sill.

The disadvantages are that the dead weight of plastic structures is quite large. It is necessary to correctly assess the current operational condition of the slab and parapet. Aluminum frames have less weight, but they hold heat less well. It will be cold on such a balcony in winter.

With supporting frame

The most difficult method, which involves major changes in the appearance of the outer side of the balcony and requires a lot of time and several pairs of working hands. At the same time, it is also the best, since it allows you to glaze completely open balcony, which does not even have a canopy, and turn it into a warm living space for the next 15-20 years.

This Soviet-style glazing is popular - despite its labor intensity and heavy weight. Its advantages:

A welded steel frame is cheaper than other materials. At the same time, it is characterized by greater strength and wear resistance.
Regular bathroom enamel is suitable as a paint coating. It provides a beautiful, long-lasting color, shine, reliable protection against corrosion, and costs much less than PVC.
Possibility to install a visor. This will not only turn the balcony into a living space, but will also distribute the load across the upper floor and place less load on the balcony slab.
You can replace the parapet with a frame. Installing the frame is easier, it costs less, and appearance is not inferior to a panoramic balcony in an elite house.
The frame can be easily insulated with plasterboard and polystyrene foam.
Any type of window can be inserted, from traditional wood to solid glass.
Due to the strength of the frame, only the wind load falls on the glass, so they can be made to any width.
The problem of the old parapet does not matter. It can be eliminated, and the supporting frame can be made lower or higher than the previous level.

Materials

The balcony glazing system is represented by a set of window sashes, a window sill, thermal insulation material (most often foam), external flashings and interior decoration.

The choice of material directly depends on the purpose of the balcony room and determines the final cost of the changes made. If the balcony is used as a place for drying clothes and storing preservatives, it makes sense to give preference budget materials: lightweight frames made of aluminum or duralumin and single glass. Such a balcony will not be insulated, and the difference with sub-zero temperature outside it will be no more than 6-7 degrees.

If you plan to set up an office on the balcony, game room for children or a place for receiving guests, it is worth choosing more reliable and expensive materials. This will be “full” or “insulating” glazing, which will allow you to use the balcony as a living space at any time of the year or combine it with a room by dismantling the wall between it and the balcony.

Plastic frames

They are convenient because they do not require additional efforts to insulate the balcony. In the case of low-budget repairs, they are suitable simple lungs PVC frames and single glass, massive windows with double glazing. For better sealing, you can foam the cracks.

The choice of type of double-glazed windows determines the final goal of the repair. For any technical specifications, satisfying the requirements, the basis of windows of this type will be a frame-profile made of polyvinyl chloride. The kit includes everything necessary fittings, as well as single-layer or multi-layer sealed double-glazed windows.

The frame (static element) is mounted in window opening, and you can choose the “filling” at your discretion: in which direction the shutters will open, whether there will be a window with an impost ( cross bars along a horizontal or vertical line), what the strips on which the double-glazed window will be attached will be, what glass the windows will be made of.

The most common material for the production of double-glazed windows is four-, five- or six-millimeter glass. A separate group should include “triplex” - double glass with a layer of transparent tape.

A double-glazed window can be single-chamber or double-chamber - depending on the number and parameters of cameras.

The PVC frame from the inside also consists of a number of jumper compartments (stiffening ribs). Their purpose is to create segments in the profile cavity that are filled with air. The more compartments, the higher the heat resistance.

The number, volumes and placement of air segments inside the profile are strictly defined, since some of them are necessary to ensure rigidity, some ensure the outflow of water, and some are needed for fastening fittings.

The level of thermal protection directly depends on the thickness of the glass unit and the distance between them. The warmest will be a balcony that is glazed with double-glazed windows of different thicknesses and at different widths from each other. An important role is played by the seals that are laid along the edge of the glass unit.

As for glass, its properties can be different:

reflex reflects the sun's rays;
reinforced – fire resistant;
hardened – impact resistant;
painted absorbs solar energy;
laminated provides excellent sound insulation (another feature of “triplex” is that with a strong impact it does not break into fragments, but cracks and remains inside the film).

Wooden frames

Their appearance has undergone significant changes over the past few decades, but the trend towards installing wooden frames continues to grow. They have a small number of advantages if you compare them with the same PVC profile: beautiful, natural, environmentally friendly. However, there are not very many disadvantages either - they require high-quality installation And good care. Wood must be treated with special protective solutions and paints, otherwise it will quickly lose its appearance, begin to rot and crumble.

Any glass can be inserted into wooden frames. A cold single one without a seal will make the balcony beautiful, but unsuitable for use in the winter season. Expensive insulated double-glazed windows with a seal will solve two problems at once - both aesthetically and practically.

Stained or pseudo-stained glass looks beautiful in wooden frames. You can order it from a master or do it yourself. This can be done using a stencil printed on a printer and ordinary acrylic paints on glass. If you don’t have the time or desire to be creative, you can purchase a ready-made film stained glass window on any theme in the store.

Aluminum frames

Aluminum profile is the most current option balcony glazing. This is due to the fact that in most old houses the condition of the balcony slab and parapet leaves much to be desired. It is not very safe to install a heavy steel frame on them, but aluminum is quite light and does not put such a load on weak floors.

An aluminum profile is convenient for small balconies. It allows you to save or even expand space by several tens of centimeters (due to the frame with offset). Frames made of this material look aesthetically pleasing and are quite durable. If you paint them with protective enamel, their service life will increase significantly.

The most important advantage is that it allows much more light into the room than a profile made of wood or plastic. And this is especially important if the balcony is used as an additional living space, and not a second storage room.

Precautions

When starting work, first of all you need to think about how to minimize the risk of injury to yourself and passers-by below. A miniature home coffee shop in the spirit of Montmartre is, of course, good, but safety comes first. First of all, it is provided by a safety belt. The industrial one is considered the most reliable, but for one-time work a high-quality sports one is quite suitable.

When choosing a belt, you need to pay attention to the length of the safety cord (cable). It should not be too short so as not to make work difficult, nor too long so that a traumatic jerk does not occur when falling. The optimal length is 2.5 meters.

It is also necessary to take into account the information on the product certificate. The safety belt and carabiner must withstand a load of up to 400 kg. You should not purchase a product without indicating this information and uncertified products.

During repair work, the safety halyard is secured with an anchor pin with a metal collet. The collet must be firmly mounted into the main wall (at least 15 centimeters deep), and the pin must be screwed into it until it stops - using a screwdriver or pry bar.

“With your own hands” does not mean alone. Glass is not only fragile, but also quite heavy, so it is recommended to glaze a balcony yourself with at least one partner.

Once your own safety is ensured, it's time to take care of others. It is unlikely that compensation for damage caused to health from a mount falling on a neighbor’s head is included in the cost estimate for repairing a balcony. The space below should be fenced off with bright construction tape. It is worth warning neighbors on the upper and lower floors about the planned work.

Preparation

Balcony glazing requires a careful approach. Preparing for repair work carried out in stages:

Cleaning. The first thing you need to do is remove things from the balcony, remove the blinds (if they were installed), and eliminate anything that might interfere with work.
Assessment of operational condition. When the balcony is not cluttered, it must be carefully examined inside and out - for damage, dilapidation, broken concrete, cracks, rot. If the condition of the slab and parapet is satisfactory, you can proceed to the next stage.
Elimination of defects. During an inspection of the balcony, problems may be discovered during the construction of the house. Before installing the profile and glazing, it is recommended to level out all irregularities and bevels that may complicate the work.
Ensuring security.

How to glaze a wooden structure: step-by-step instructions

Independent glazing of a balcony with a wooden structure involves the following steps:

Preparing the surface for work. Once your balcony has been cleaned, inspected and in order, it's time to get rid of all the interior and exterior coverings. Then you need to remove accumulations of dust and other contaminants.
Measurements. The accuracy of window opening measurements determines how well the frame will fit to the base, so it is important to be extremely careful and double-check the resulting values.
Installation of a wooden “box”. The “box” consists of wooden beams that form the base for the frame. It is fixed at the level of the existing balcony railings and the top beam. The side bars are mounted to the left and right surfaces of the wall. All beams are secured with metal brackets.
Installation of lathing for interior decoration of the balcony. If this step is included in the renovation, it is carried out right up to the glazing of the balcony. When the surface of the walls, floor and ceiling is covered with panels or lining, you can begin installing windows.
Installation of frames. Before glazing begins, the glass must be inserted into the frames and secured. They are made to order (according to individual sizes), purchased ready-made, or made independently - from profiled wooden beams with grooves.

The glass is inserted into these grooves, pressed with slats and fixed with nails on three sides.

Treatment of cracks insulating materials. Even with the most careful preparation, it is impossible to assemble frames without any gaps, like a good designer. There will definitely be gaps that need to be treated with tow or foam.
Installation of platbands. It is carried out after thermal insulation, in no case before.
Treating wooden frames with protective agents. The coating protecting against moisture is applied in 5-6 layers. The frame can then be patched, painted, or left clean.

Installation of metal-plastic

The most affordable type of glazing without the help of a specialist. During the installation and assembly process you will need: drill, screwdrivers, hammer, spatula, knife, self-tapping screws, polyurethane foam.

Algorithm of actions step by step:

Preparing the slats. 10-15 fragments with an area of 4 by 4 cm, which are needed to align the parapet line and correctly align the windows along the horizon.
Removing the glass unit from the frame. The manufacturer delivers a solid structure made of PVC and double-glazed windows, but before installing the frame, the glass must be removed, otherwise the frame will not be liftable.

You should remove the double-glazed windows carefully, placing them in a row against the wall. For reliability, you can cover it with soft cloth or thin foam rubber.

Removing sashes from window hinges.
Installation of the stand profile. This is a mandatory element of the kit, necessary for ease of installation of the window sill. Its height is only 20 mm and cannot be installed without a stand profile.

To install the profile, you need to rotate the frame 180 degrees, insert it into the groove, and secure it to the underside of the frame with a wooden (not steel) hammer.

Installation of frame fastenings. Stepping back 15 cm from each edge of the frame, fasten the plates to the top panel using a hammer and self-tapping screws 3 cm long.
Installation of windows. The most difficult moment at this stage is fixing the frames to the parapet. It is necessary to do this with assistants so that the frame does not “peek out” beyond the perimeter. It is important to note that the screws are not driven into the dowel, but screwed.

After fixing the upper level, the frame will hold quite securely. Then you can fasten the remaining sides, connecting them using self-tapping screws at a distance of approximately 6 cm.

The connected frames are leveled using a level and plumb line.

Treatment of cracks and gaps from the outside.
Window sill installation.
Installation of slopes and ebbs. At the same stage, the window perimeter and joints are treated with silicone.
Installation of double-glazed windows according to the instructions.
Hanging the sashes.

How to glaze a balcony sliding windows look in next video:

Frameless method

Aesthetic frameless glazing is chosen when it is necessary to let in maximum sunlight into the room. It is a sliding system made of impact-resistant glass (transparent, tinted or stained glass). There are no frames or partitions, and the glass at the top and bottom is attached to metal rail profiles.

On the lower profile, under the outer sash, there is a fixing tape, which is needed so that the open sashes do not touch each other.

Such a balcony can hardly be warm, because it will not be possible to fit the glass to each other without gaps. The only way to reduce gaps is with acrylic inter-glass seals. They are included in the kit and are designed to be placed over the edges of the glass, like covers.

The system is equipped with rubber seals, which are laid outside - between the doors and the aluminum profile. They are necessary in case of wet snow and rain.

The system seems quite light, but at the same time it is very durable (due to the thick glass) and perfectly protects from precipitation, wind, and noise. The thickness of the glass is selected in accordance with the height of the balcony. For a height of over 200 cm, a thickness of at least 8 mm is required; for a height of less than 2 m, 6 cm is sufficient. The width of the sashes varies between 60-80 cm.

How to glaze a balcony with your own hands

A glazed balcony or loggia is not just provided additional thermal insulation and protect from outside noise from the street. A similar decision makes the owner square meters the owner of an additional (even small) room, which can be equipped to your own taste and according to your needs. A huge number of construction companies offer their services in this regard, as do traders of PVC and duralumin profile structures. But often the financial situation forces us to find more profitable options in terms of savings, which involve doing a huge part of the work or doing it all without the help of others. We are trying to glaze the balcony with our own hands. The article will discuss how to glaze a balcony yourself.

Fundamentally: glazing of balconies requires official approval from the relevant authorities. If you do everything “according to the law,” then at first you will have to worry about additional “permitting” documents.

How best to glaze a balcony

There are quite a few methods, we will list all the main ones and give a small idea of them, which will help you decide on the direction of work in the future.

Glaze the balcony photo

"Cold" glazing, regardless of the methods of opening the frames, implies that the balcony can be used as an additional “livable” room exclusively in the warm season. This is the most inexpensive option, because structures made of duralumin profiles, which are most often used for these purposes, are completely accessible. Among the positive properties of this type of glazing is its low weight, so if there are doubts about the reliability of the support, then aluminum will the right choice. The material is very resistant to external influences, humidity and low temperatures is not afraid, although it can still become deformed from large jumps. From time to time, for the “cold” method, wooden frames with one glass are used.
There is also an option with "warm" aluminum profile. It’s not difficult to make a wardrobe for a balcony or loggia with your own hands. You need to know some of the nuances and features, and have at least an approximate drawing or diagram. It uses double frames and double glazed windows. And in addition, special plastic placed inside the profile keeps heat inside and does not let cold air in from the street. But this design is almost not in demand due to its high cost.
Usage wooden frames counts budget option, but labor-intensive in terms of caring for them: you will have to renew the paint once a year if appearance matters. To reduce the cost, some use used wood. With proper care it will last quite a long time. If your income allows, then you can, as they say, install wooden “Euro-windows” once and for life. Their production technology makes them durable, and they look very impressive.

Panoramic view glazing assumes that special glass, additionally processed to increase its strength characteristics, serves as the basis for assembling a balcony fence from floor to ceiling. From the point of view of creating a spectacular space, this method takes a leading position. Due to the thickness of the material, the apartment becomes protected from heat loss and the noise insulation performance increases. The partition can be made of tinted glass and looks especially stunning when assembled without frames.
Frameless method Balcony glazing requires certain skills and literacy during installation. But the complexity is justified by the result when the “output” is a light, as if weightless, structure made from one glass. The lack of frames is compensated by special metal guide profiles. Do-it-yourself window installation video instructions. It is in them that the glass sections are fastened and moved along them. Special tempered glass is used for such tasks.
PVC profile frames are a popular and practical way of glazing. The ability to install a double-glazed window with three air chambers significantly insulates the room, especially in combination with a wider profile. Installation is simple and quick, and the service life is quite long, and all this splendor will not require complex maintenance. For those who do not want to install plastic windows because the sashes “eat up” a lot of space when opened, you can opt for the option with sliding sashes.

If you want glaze the balcony “with the extension” of the structure, then you should be very confident in the strength of the parapet, because the load on it in this case will increase in two directions at once.

Important: it is better to carry out work on the exterior finishing of the balcony with siding or other materials before glazing. Glaze the balcony video. How to glaze a balcony with your own hands without a frame. This sequence will make the cladding work easier.

How to glaze a balcony with plastic windows

This process is not very difficult, especially since the manufacturer itself carries out measurements, so there should be no mistakes in this area. How to decorate the inside of a balcony with your own hands (photo). So, the finished PVC structures have been delivered, the decision has been made to abandon installation, what next?
The existing old sashes are being dismantled and at the same time the balcony must be freed of all objects and things that may interfere. The space on the balcony can’t be called large anyway, so ideally it’s worth taking everything out of it. How else is the stage useful? deep cleaning"? All the nuances that require improvement and elimination during insulation, waterproofing, and so on become immediately visible.
A wooden beam is secured around the perimeter of the balcony using mounting dowels. When measuring, the presence of beams is taken into account. That is, the height of the finished structure will be equal to the height from the side of the barrier to the top slab minus the parameters of the crossbar. It is worth checking with a representative of the supplier company what thickness of beam he includes in the calculations.

Do-it-yourself balcony glazing (Part 1, installation of window sill and siding)

Glaze DIY balcony not as difficult as it might seem. Moreover, covering the balcony with clapboards with your own hands, as there is a video tutorial on the balcony: In this series of videos I will try.

HOW TO GLAZ A BALCONY CHEAP!!! Glazing a balcony with your own hands.

HOW GLAZE the balcony for 30,000?!!! Channel DelaGardening Deeds Gardening Hello, my viewer! My name is Belik.

First, the PVC frame itself is installed without sashes. First of all, the main and largest front part is mounted. And then the side one. How to glaze a balcony with your own hands: step by step. In order to save money, many refuse glass on the side in favor of sandwich panels. This, of course, is a matter of taste.
On the street side, a flashing is attached under the frame. How to glaze a balcony with your own hands. If a balcony with a roof is glazed, then the canopy must also be secured. It is placed under the structure and secured with self-tapping screws, and the cracks are filled with sealant. The visor will protect against moisture ingress and leakage into the profile and into the room. Therefore, issues of tight fit should be given more attention.
When the frame is level and secured, you can begin installing the sashes in place. After installation, you should check them for tightness. An important indicator is the smoothness of movement when opening and closing. If everything is done correctly, the frames will open easily and close without effort, fitting tightly into the opening.

It is important to think carefully about the options for opening the doors. This structure will have to be washed, and it is better to plan it so that from the tear-off section you can easily reach the adjacent “blind” one. It’s unlikely that anyone would want to risk their life cleaning things up.

From the outside, it is convenient to hide the joints with the help of additional decorative elements. They can be purchased independently, or “included in the kit” when ordering from a company that supplies PVC frames. How to cover a balcony with clapboard with your own hands, video on covering and walls on the balcony. All gaps from the inside are sealed using polyurethane foam. When it dries, it is trimmed and the protective film is removed from the frame and sashes. Next, work continues on the final decoration of the room.

Glaze the balcony video

Glaze the balcony with an aluminum profile

Another advantage of a lightweight aluminum structure is the sliding opening system. It saves space, however, it also causes problems with the folds freezing in winter. If the choice is nevertheless made in its favor, then we learn how to properly glaze the balcony.

We dismantle the previous glazing.
If the parapet is made in the form of metal handrails, then an “apron” made of galvanized steel must be installed on top of them. If the barrier is concrete, this is not required. The profile will fit right on it.
The visor is mounted.
A window sill is being installed.
To attach the frame to the opening, install anchor plates. By using anchor bolts a frame structure is installed on them.
The ebb is attached to the frame.
Sashes are installed in the openings.
All seams are sealed using polyurethane foam and covered with flashings (optional)
The final step is to adjust the fittings. The doors should move apart smoothly without making any noise. 6 DIY balcony glazing video; glaze the balcony with your own hands. This indicates correct installation.

Glaze the balcony with wood

It's good if you home handyman Carpentry skills available. Then the option with glazing with wooden frames becomes cheaper. After all, using wooden beams, glazing beads and ordinary glass 4 mm thick, he can assemble the sashes, providing them with the simplest fittings from the nearest store. How to glaze a balcony yourself: video and photos. However, even in the absence of such talent, you can order an inexpensive finished product from a workshop. After which you can begin installation.

It is important to consider that a large structure can “sail”. Therefore, despite the visual appeal of large and wide openings, it is worth remembering this unpleasant effect.

Preparation has already been written above, so we skip this stage.
There are no special tricks in installing such a design; moreover, the process itself differs little from, say, PVC installation profile. Using metal fastening plates and screws, we install a wooden frame without frames.
The ebb, canopy and window sill are installed in the same way as the glazing methods described earlier.
The seams are foamed and subsequently hidden under the finish.
The sashes are fixed in place, the fittings are adjusted.

For a long time, this was the only way to glaze a balcony in a Khrushchev building. Of course, such glazing will never become the object of envy of neighbors. But if done carefully and securely fastened, it can protect against dust, falling leaves and change the microclimate on the balcony by a couple of degrees.

How to glaze a balcony with your own hands using a frameless method

A very impressive type of glazing, but it also requires some effort and courage. The first thing many homeowners fear when they are offered this option is safety. If we are talking about installing “full-height” glass, then it may be worthwhile to provide some kind of removable structure, reaching a meter in height, and attached to the walls or floor at a time when, for example, children are playing on the balcony. It is quite simple to weld from metal pipes of small diameter.
The second not entirely desirable effect of a magnificent view of the surrounding area is an equally wonderful view of the privacy in the apartment. Especially in the evening with the lights on. Those who do not want to provide neighbors and random passers-by with the opportunity to watch the reality show “live” can choose the following “rescue” options.
Consider a system of curtains or blinds. The second option will be expensive, given non-standard sizes opening, and you will have to suffer with a fabric solution.
At the planning stage, you can choose the type of glass with one-sided transparency. They look good, on sunny days they are very good, but in the fall and in cloudy winter weather such glazing evokes melancholy due to the low bandwidth Sveta. Alternatively, the presence of such glasses can be combined with regular ones.
If we are talking about frameless glazing of a balcony only in the part where most people are accustomed to seeing a window opening, then the difficulties described above do not arise.

Important: floor glazing involves dismantling the parapet. Before carrying out work, you must make sure that the demolition is legal and will not cause negative consequences for the entire house.

For all its attractiveness, the panoramic method requires additional expenses for insulation, well, you shouldn’t choose it if the balcony offers a “wonderful view” of the factory complex or the dull neighboring multi-story buildings.
An aluminum panoramic profile will be cheaper, but its ability to retain heat, let’s say, tends to zero and you should think carefully before installing it.

There are many options, but each of them can be implemented on your own. How to insulate a balcony with your own hands - step by step. Therefore, balcony glazing can be considered a type of work on which you can save money.

Precipitation falls on a balcony without glazing, a lot of street dust accumulates there, and gifts from birds appear. Often apartment owners prefer not to store anything in such an open area. To make a balcony a full-fledged enclosed space, it is better to glaze it. Anyone can do this with their own hands.

What you need to be prepared for before starting glazing

Balcony glazing requires a professional approach. In such work, it should be remembered that the balcony slab is designed for a certain load. Therefore, she may not be able to withstand the weight gain. To prevent a fatal collapse of the entire structure, it is better to seek advice from specialists. They will be able to give clear recommendations on materials that can be used for glazing in a particular case.

When glazing a loggia, such detailed calculations of the load-bearing capacity of the balcony slab are not required, since the load of the side of the loggia is transferred to the main wall of the house. Glazing can be produced using almost any materials and methods.

It is better to do the balcony glazing yourself with your own hands together with an assistant. In such work you will have to constantly lean over the parapet, so it wouldn’t hurt to have someone who can provide backup. For safety, it is advisable to prepare safety equipment in advance.

Balcony glazing – choosing the best method

Glazing a balcony with your own hands can be done using both cold and warm methods. In the first option, lightweight frames with single glasses are most often used. In winter, it is quite cold on such a balcony, so during this period of the year this room is used as a pantry for food. Well, in the summer you can organize gatherings on the balcony with such glazing.

To avoid unnecessary maintenance hassle, we can recommend an aluminum profile as a replacement for wood. This material is easy to install, environmentally friendly and lightweight. During operation, aluminum is not subject to rotting. Therefore, there is no need to worry about the destruction of this material. For such cases, the sashes can be used either rotary or tilt-and-turn. Recently, sliding doors have become increasingly popular.

Such balcony glazing requires a serious approach to work and careful calculation, since the dew point should not be inside the balcony. Due to improper insulation, condensation in the room can lead to mold throughout the apartment. To ensure that the dew point is not in the room, it is necessary to carry out high-quality hydro- and thermal insulation of the floor and parapet. Remember, even a small gap or cold bridge can lead to condensation.

For warm glazing of balconies you need a double-glazed window with seals. It is recommended to implement natural ventilation, which can be adjusted independently. For this purpose the manufacturer metal-plastic windows ventilation flaps are provided. To get rid of condensation, air circulation is required between the balcony and the room. For this purpose, it is necessary to install a fan in the window of the room, which will draw air out of the room. At the bottom of the balcony door you need to install ventilation grille.

Types of glazing

In elite multi-storey buildings, as a rule, use panoramic glazing balconies. This option involves a glass fence from floor to ceiling. The most popular is frameless panoramic glazing; with it, the natural lighting of the room increases several times.

For such glazing, shockproof glass 6–8 mm thick is used, which is treated with metal oxide. Such a double-glazed window is quite difficult to break. Thanks to special coatings, glass can reflect heat back into the room and allow ultraviolet light into the room. Such double-glazed windows have very high sound insulation properties.

Glass sashes can be hinged, sliding (on rollers) or folding. In the case of a small balcony space, the most the best option will be used sliding mechanism. In this option, when opening the doors, the room area is not lost.

Aluminum profiles are also used for glazing. Weight depends on the thickness of the glass and the size of the sections, but, as a rule, does not exceed 20 kg per linear meter. m. Therefore, it becomes possible to carry out glazing of the balcony with removal. For this, detailed strength calculations are not required.

To assemble the sections, you will need to make guides at the top and bottom of the balcony opening. Then you need to install vertical racks. Then the frame is secured using latches and locks. It is imperative to measure the evenness of the location of the guides and racks. The skew should not exceed 5 mm per linear line. m.

Glazing of balconies can also be done using metal-plastic windows. In this option, the weight of the structure will be 40 kg per linear meter. m. It is recommended to install such glazing before installing the window sill. Racks made of metal-plastic profiles must be attached to the ceiling and parapet using self-tapping screws.

Before installation, it is necessary to remove double-glazed windows in all windows, since during installation work you can easily break the glass. To remove double-glazed windows from the frame, you need to pull out the window beads.

Also, before installing the frame, all sashes must be removed. To do this, you need to squeeze out pins in the upper loops, which can be pulled out using pliers. After this, the sash can be removed from the lower hinge.

If it is decided to make a winter garden or greenhouse on the balcony, then you can use glazing of the balcony with removal. This will require a parapet of increased strength. Additionally, you will have to take care of installing the visor.

Consecutive glazing of the balcony

Finishing and glazing of balconies is always carried out at different stages. For example, with lattice fencing, insulation and decorative external finishing done before glazing begins. But the interior finishing and installation of the window sill must be done after the window frames are installed.

If there is a brick or concrete parapet, you first need to level its surface using cement mortar. Then do exterior finishing. Only after this can glazing work be carried out. Interior decoration and insulation is done after installing the window sill.

If the balcony does not have top floor or is hanging, then you need to use pipe stands. They will be able to withstand most of the glazing load. External frames must be made from 40–60 mm angles. With the help of an angle grinder you need everything welds make amends. After this, you need to do degreasing and cleaning. Then you can cover the entire frame with acrylic enamel.

The most labor-intensive stage of the work is creating the visor. It should protrude 15 cm beyond the glazing. As a rule, 40 mm corners are used. The height of the visor is made within 40 cm.

The first step for the visor is to make a frame, in which you need to drill 10-12 mm holes for anchor bolts. The distance between the holes should be 40–60 cm. You need to ensure that there are at least 4 holes along the entire length.

To mark places for bolts on the wall, you will need to attach the frame, level it horizontally using a level and draw marks in the holes. After this, you can start drilling holes for the anchors. Once the bolts are installed, the frame itself can be attached to the wall.

The next step is to create cross members and slopes that need to be welded to the frame. Then the outer crossbar is attached. Upon completion, you can begin installing the canopy roof. As a rule, galvanized sheets are used for this. They must be laid overlapping in one wave. To prevent water from leaking between the wall and the roof during rain, it is necessary to insert the sheets into the grooves.

The width of the supporting frames must be made with a small margin (10–15 mm) from the thickness of the window. According to experts, the frame can have a maximum size of 1100x1500 mm (subject to the use of a 40 mm corner). If a 60 mm corner is used, then the length can be made 1300x1700 mm. Using pipe stands, the frame must be connected to the canopy by welding.

Once the frame is completely installed, you can begin decorative finishing and insulation. For cladding it is possible to use metal sheets that must be welded to the frame. As an option, you can use moisture-resistant plywood or plasterboard for finishing. A balcony covered with siding looks quite decent. As thermal insulation material basalt wool is used.

The glazing process begins with the installation of window frames, which must be secured to the corners with 6 mm self-tapping screws. The distance between the fasteners should be 25–30 cm. After the window frames are secured, all grooves must be foamed. Then the window sashes are installed and the double-glazed windows are put in place. Upon completion, you can begin interior decorative finishing. For this purpose they use wooden lining, plastic panels or drywall that can be painted.

Glazing and insulating a loggia is best solution to increase usable area. The question of how to glaze a balcony yourself can be solved in several of the most affordable ways: equipping the room with sliding wooden or metal-plastic doors, installing double-glazed windows, which will perfectly retain heat in the room.

The choice of double-glazed windows must be taken responsibly, because... Approximately 80% of the heat loss of the glazed loggia space occurs through them.

The most common methods of protecting a loggia from wind, dust and atmospheric precipitation are:

wooden structure;
metal-plastic installation;
frameless design.

Glazing a balcony with your own hands using a wooden structure will isolate the room from noise and increase the temperature in the glazed room.

If the choice fell on an environmentally friendly wooden structure, then you need to prepare tools and materials:

glass required quantity 3 mm thick;
small nails;
hammer;
brush:
platbands;
polished triangular profile slats with a side of 7 mm;
timber 50x50mm;
protective compounds for wooden structures (varnish, pinotex or others).

To make a better and more reliable design, it is better to install an additional galvanized canopy on the loggia of the required size, which will protect the windows from moisture leakage and add attractive external aesthetics.

Stages of design and glazing of a wooden structure

Initially, it is recommended to remove all external coatings down to the concrete itself. The surface should be cleaned of dust and other contaminants. After the preparatory work, the first next step is accurate measurement of the opening, manufacturing and installation with a minimum gap wooden box, which will serve as the basis for the frames. This structure is made of timber, which is fixed at the level of the balcony railing and the top beam, which is mounted to the ceiling and side beams using brackets. The side bars, in turn, are mounted with brackets to the side surface.

The next step is to install the sheathing of the entire room for cladding with the selected material. Only after the ceiling, walls and floor are covered with their structure (wooden panels or lining are suitable for wooden frames) should you begin installing frames with glass. In this case, the glazing method itself can be divided into several types:

euroglazing;
simple;
combined.

Each method has its own characteristics. The most common glazing is suitable for installing wooden frames. It is important to remember that before glazing the balcony, glass must already be installed in the frames. Balcony frames can be purchased ready-made in standard sizes, ordered according to individual sizes, or made independently from profiled wooden beam, into the grooves of which glass is inserted and pressed by nailing with triangular slats.

The final step will be to carefully fill the cracks with tow or other insulating materials. Then the platbands are installed. To protect wooden structures loggias from exposure to moisture, a protective layer should be applied 5-6 times.

Installation of metal-plastic structure

Metal-plastic frames resemble a layer cake in appearance: plastic, metal, air chambers. Water flows through the drainage holes, so freezing of the structure itself and the room as a whole is excluded. Glazing a balcony using this method is very simple. You will need the following tools and materials:

hammer drill or drill (with a carbide drill, 8 mm in diameter);
construction gun (preferably);
hammer;
screwdriver;
spatula;
foam gun;
polyurethane foam;
dowels or screws.

For self-installation and glazing with profiles, must be based on the instructions. When measuring a balcony frame, you should not make large tolerances. The first step is to determine the accuracy of the proportions. In order to check the symmetry of the opening, both diagonals are measured, and the difference should not exceed 5 mm. If it was possible to achieve this ratio of diagonals, therefore, the angles should be exactly 90 degrees. Then the measurements take into account the technological gap (15 mm on both sides).

It should be remembered that it is not recommended to lift the frame to the upper floor with double-glazed windows already installed, in order to avoid distortions and damage. During installation, you cannot leave the embedded wedges protruding, since later you have to cut off the protruding ends, which is extremely inconvenient. When installing, spacer wedges are made to fit the width of the frame.

https://youtu.be/xuQrjJXqx_g

The metal-plastic frame is mounted on spacer wedges, screws with dowels, polyurethane foam, additional fastening of windows with metal brackets is also provided. Additional fasteners will help you fix the frame with maximum precision until it is completely level. After the structure is blown in with foam, it must be left closed for 8 hours until completely dry to avoid deformation of the frame.

Frameless method of glazing loggias

This is a new method that has become widespread among consumers in a short period of time. Tempered glass is very durable material, capable of withstanding heavy loads. The thickness of the glass directly depends on the size. If the height exceeds 2 m, then 8 mm thick glass is used. The width of the sash varies from 60 to 80 cm. If desired, you can order tinted glass.

The opening process is very simple. First, open the outermost door top lock(it resembles a floor lamp switch), by pulling it, the sash moves out of the upper and lower frames. The doors are open, then the lower lock, or rather the plastic handle, comes into play.

What does frameless glazing consist of:

glass;
top and bottom profile;
upper and lower glass trim;
floor lamp lock;
handle-lock;
retainer;
rubber seal;
fixing tape.

The fixing tape is necessary to secure the sashes so that they do not swing or hit each other. It is mounted on the outer sash of the lower aluminum profile. The structure is mounted (assembled) extremely simply. Aluminum linings are glued to the glass sashes at the top and bottom. Load-bearing wheels (hinges with rollers) are installed on them. These loops cling the glass to the guide profiles (upper and lower). This type The design is very similar to a wardrobe and consists of the following elements:

glass, 6-8 mm thick;
bearing wheels with a ball bearing device;
upper and lower aluminum profile;
clypeus;
sliding device and latch;
pad;
bottom latch;
ebb with plastic coating.

As in other structures, upon completion of installation work it is necessary to seal the gaps between the sashes. Acrylic seals are placed on the edge of the glass, like a cover for skates. They are easily dismantled, then ventilation gaps of up to 3 mm are obtained. Rubber seals are laid on the outside between the glass doors and the aluminum profile, reliably protecting the structure from moisture penetration. The gaps between the doors and the walls of the balcony are filled with sealant matching the color of the profile. The structure itself is fastened together with special glue, without nails or screws. And the most attractive thing is the hidden fittings.

Proper glazing of a balcony with your own hands will not only provide your home with additional thermal insulation and sound insulation characteristics. But thanks to the fact that the balcony will be glazed correctly, corresponding to all its main characteristics, you will also have an additional, albeit small, area. It can also serve as an additional place for personal relaxation or a place to store things (warehouse).

Most companies offer their own services for glazing balconies and loggias, most of them are those that manufacture plastic pvc structures with their further installation. But many people think that the company’s services are expensive, so you can read the presented article and do full balcony glazing yourself.

To glaze a balcony, a permit is required, which must be agreed with the relevant authorities, they must also give you permission and indicate the characteristics of the house and review your balcony slab. If you don't do it completely this procedure, then your balcony will be considered illegal. But before glazing the balcony,...

Do-it-yourself glazing of balconies and loggias

Each type of balcony glazing presents its own special category of complexity and requires certain skills, due to which certain difficulties may arise. Depending on the type of glazing you choose for your balcony, you will need to adapt to its structure and do it in a certain sequence. Thanks to the presented article, you will be able to fully overcome all the difficulties and take into account all the factors that you will need to glaze your balcony or loggia yourself. First, you should familiarize yourself with a small diagram of the arrangement of glazing elements:

Measurements and ordering of designs

After you have chosen which profile your balcony or loggia will be made of, you need to order the structure from the manufacturer. But, to do this, you must first take all measurements from your balcony and perform the appropriate calculations. To do this, it is necessary to completely dismantle the old glazing, if any. The previous glazing must be completely removed. You need to remove all the frames and all the fastenings until you go through the entire area from the ceiling to the parapet.

The next step will be taking measurements from the resulting balcony after cleaning. To do this, you need to use a tape measure to accurately measure all the distances from the base of the parapet to ceiling slab, and then, from one wall to another.

All measurements must be as accurate as possible, because sometimes this can lead to huge problems. Initially, this will not have any effect and will not be noticeable, but during direct installation, even a few millimeters can ruin the installation and cause a huge number of different problems. It is worth noting the fact that when placing an order with a company, people are not completely trusted and they send their own measurer to check the correctness of the measurements.

In addition to the fact that the person sent from the company will take all the measurements again, he will also review overall picture balcony Further, he may say that your loggia does not meet all standards. This may be due to the fact that the parapet has been standing for quite a long time and may not support the entire weight plastic construction.

In the presented case, you can fix this problem, fake the parapet to the desired condition, or even pour a new parapet. Another option is to install not a plastic structure, but an aluminum one, which is much lighter.

There is an option where the balcony slab cannot support the weight of the structure. It will be quite difficult to correct this issue, but it is still possible with the help of additional reinforcement of the floor covering.

In order for the company’s expert to make a final decision, he needs to take all the dimensions from your balcony and carry out the appropriate calculations.

If everything is fine and your balcony is completely ready for full glazing. You and a company employee draw up an order for the structure, calculating its approximate cost.

Preparatory work

After the specialist has made his satisfactory decision, you need to move on to the stage of preparing the premises for further reconstruction. First, you need to completely check the parapet and detect the presence of all cracks on it, even very small ones. Next, you should purchase galvanized metal and completely seal them.

You need to clearly measure the gap, cut the required piece from the galvanized sheet and seal the crack. It will need to be inserted from the outside under the railing, and then finally secured using self-tapping screws. This process is quite difficult to complete on your own, so you will need a little help.

If your parapet is not approved by a specialist, then you need to build a new one. To do this, you need to completely demolish the old parapet and build a new one from scratch. A standard parapet is laid out one brick wide. Its installation takes place on sand-cement mortar, one by one.

During the construction of the parapet, you need to constantly monitor its level, because in the end you should get a completely horizontal structure. The clearly horizontal design will help you easily install the glazing.

After completing the manufacture of the parapet, you need to purchase a metal strip or corner with a cross-section of 5 mm. One of the selected materials will serve as a frame to which the structure frame will be attached.

The manufactured frame, using dowels and self-tapping screws, is attached along the entire perimeter of the balcony opening.

Additional preparation for glazing installation

So, let's proceed to the actual installation of the glazing of your balcony with your own hands.

The company has delivered a manufactured structure to you and your balcony is fully prepared for installation.
First, you need to remove the glass units from the frame. This process is quite important before installation, because the weight of the complete structure is quite large, and it will complicate the installation process.
Usually, in companies that manufacture double-glazed windows, initially, the glazing beads are not hammered in completely; this is done to easily detach the double-glazed windows from the frame.
To remove a double-glazed window, you need to pry up the glazing beads that hold it in place with a spatula, and then remove them. It is necessary to pry starting from the middle and moving to the edges. This must be done in the following order, first the side beads, then the bottom, and lastly the top. Next, hold the glass and carefully remove it.
Removed double-glazed windows must be placed on a clean and level floor, free of debris and other things.
Next, you need to remove the sashes from the frame. There is a rod in the upper loop that must be pushed down and then pulled out completely using pliers or pliers.
Next, you need to remove the sashes from the frame. To do this, you need to remove the latch, which is located in the upper hinge of the sash. After which the sash itself should be slightly tilted towards itself, then lifted and removed from the lower hinge.

Frame installation

The frame comes with a stand profile that needs to be installed. It is a plastic strip that should be attached to the bottom of the structure. Turn over the already lightweight frame and, using a mallet, insert the bar into the grooves. Turn the frame over to its standard position.
Now it’s time to install the frame fasteners. From each edge window frame you need to retreat 15 centimeters on each side and secure the plate tightly in this place. A special hole must be drilled for each fastener. The part of the fastening that will protrude must be bent at a right angle; this part will be attached to the concrete surface.
Installing a frame in a window opening. This stage requires additional help and is almost impossible to complete on your own. It is advisable to have three people. The three of us install the frame in the designated place, after which it must be completely leveled in both vertical and horizontal positions.
After complete alignment, using wooden stands, we fix the frame in its place.
We attach the frame to the parapet. This must be done using anchors, which will need to be driven into brick or concrete at least 6 centimeters.

Frame fastenings when installing glazing

Installing a frame in a window opening

Installation of ebb tides

After the frame is installed, there are only a few details left that are also important to consider:

Once the frame is completely secured in place, you need to install the canopy. It will serve as a drainage basin. Installation should take place in the upper, outer part, installation is carried out using self-tapping screws.
The cracks are being blown in. This is done using polyurethane foam.
Insulating glass is installed into the installed and secured frame.
Next, installation is carried out on the hinges of the tilt and turn sashes.
We secure the folding mechanism to the sash and frame.
The last stage is a complete check of the tightness of the fit and full operation of the valves.

Installation of ebb tides

Installation of low tide on upper floors

Sealing cracks with foam

If the doors move with extra effort or are difficult to open/close, then they need to be adjusted as in the photo.

Self-installation of PVC structures for balcony glazing

This process is quite simple, although they charge a lot of money for its work, which is why we recommend that you install the windows yourself. This will not only save your finances, but will also help you buy additional accessories or something else altogether. The company you contact to order windows will have to send a measurer to you, who will independently take all the dimensions and transfer them to the company so that the direct craftsmen can make you a window structure. After the order is completed and delivered to your home, the immediate work begins related to the full, independent, and most importantly correct glazing of your balcony or loggia.

Full PVC installation window design is described above, only a few can be noted here individual characteristics And interesting points when installing a window structure from PVC profiles with your own hands.

Glazing of a loggia using an aluminum profile

Glazing using an aluminum profile is not a more complicated installation system compared to plastic, but each has its own nuances. By giving preference to the presented type of profile, you can also easily carry out a complete and completely correct installation yourself, saving the same money that can be used for other items and the like. So, let's get started, all the work coincides with the general glazing options except:

If your parapet is initially made in the form of standard metal handrails, then you will need to install an “apron” on top, preferably made of galvanized steel. If a concrete barrier is installed, no additional actions are required. The profile will be installed directly on it.
For complete correct installation of the frame, you first need to install anchor plates. Next, the structure is secured using special anchor bolts. You need to pay special attention to this point, because it differs from installing a plastic profile.

After all the above steps have been completed, the doors should slide apart smoothly and not create noise when closing. If these factors are normal, then you have done everything correctly and can continue to arrange your loggia (balcony).

Wooden window structures

In order to glaze a balcony or loggia yourself with wooden window structures, you will need some carpentry skills. If you understand this, then this installation option will not only be easier, but also cheaper. In order to install wooden window designs, you need to assemble the sashes correctly and as accurately as possible.

For a carpenter, this does not require much time or expense. He will be able to assemble the sashes himself using timber, ordinary glass with a thickness of 4 millimeters and glazing beads. But if this talent is not present, then you will have to order the presented product from a separate workshop. And only then begin the glazing of the balcony.

An important point, also, sch

There is also the fact that a large structure can “sail” a little. No matter how beautiful and attractive a large or wide space may look, you should never forget that if you do not pay due attention to its features, serious problems may arise.

Glazing of a balcony using a wooden profile

Using metal mounting plates and using self-tapping screws, you need to completely install the structure frame and secure it.
All fittings are fully adjusted and checked.

Enough for a long time for glazing in Khrushchev-era houses, this was the only possible option. Such designs do not look very prestigious, and the neighbors will not envy him.

But even this glazing option allows you to protect your balcony or loggia from unwanted dust and dirt, water and falling leaves, and much more. And in the housing itself, the temperature will rise by several degrees, due to which heating costs will be reduced.

Frameless window designs

The presented type of glazing looks as impressive as possible and is very beautiful. But in order to do it, appropriate efforts are needed. Also, it is important to take into account the fact that this option is not the safest, especially in those moments when children are playing on the balcony. Since the windows will be full height, it is often proposed to make or purchase an additional removable structure, for example, a meter high. At such moments, as indicated above, you can install it and no longer worry about further actions children. Usually, this design, is made of metal pipes with a small diameter.

Another point that is worth paying attention to when glazing a balcony is that not only from the apartment you will be able to see as much as possible everything that happens on the street. But even from there one can see one’s entire personal life. All housing will be especially visible in the evening when the lights are on. In order to avoid the “reality show” effect at home, there are several options:

You can consider a separate system of curtains and blinds. This option is quite common, but here it is worth considering the fact that blinds will become quite an expensive pleasure. And when choosing a fabric, it should be completely opaque, even in the light.
The second, more popular solution to this issue seems to be the choice of a design with one-sided transparency glass. IN summer time, they will be as beautiful and efficient as possible, but in other seasons, they will be a little dim, and there will not be enough light. As another small variation, we can say that such glasses are combined with ordinary ones, that is, you can make some single-sided and some ordinary double-glazed windows.

Interesting facts about frameless glazing

When considering frameless glazing, more high floors, and without the presence of nearby houses, the above-described incidents do not occur. An important point is the fact that for installation frameless glazing the parapet will need to be demolished. This small factor can have a unique impact on the overall structure of the house, so it is advisable to contact the appropriate service and find out all the details.

Beauty is beauty, but it is worth paying a lot of attention to the insulation of this balcony, because the glass itself will not be able to protect the home as much as possible from the winter cold. An unpleasant moment may also be that the balcony goes directly to another house or to a nearby factory.

The aluminum panoramic profile does not have high thermal insulation characteristics, due to which it is also worth thinking about before choosing it.

Features of glazing with and without extension

You should also consider some features of installing remote glazing along with standard glazing. Of course, there are not many of them, but you should know them..

First of all, for carrying out glazing with removal, especially when working in old houses, you will need to strengthen the parapet, since this type of glazing has a slightly greater load than standard options.
In addition, we suggest you look at the diagram below remote version balcony, to understand some of the differences in structure compared to conventional balconies.
In addition, it can be noted that here you will need additional arrangement of a larger and more durable visor.

Conclusion

Glazing a balcony yourself is not a difficult task. With its help, you can save your finances well and buy something else. Now, having studied the installation of each of the various structures, you can easily glaze the balcony yourself. We also suggest watching a short video tutorial on how to glaze a balcony yourself: