What to make your own from a gas cylinder. How to make a practical grill from a regular gas cylinder

When cold weather sets in, the issue of insulation becomes relevant. It is especially important for rooms that you visit from time to time. This includes garages, workshops and utility rooms where to install stationary system will be inappropriate. In some cases, this is completely impossible, but if you are unable to do without heating, then you can make a stove from a gas cylinder with your own hands.

It is recommended to use one of two options, the first involves creating a system using electricity, while the second is using solid fuel. The latter include a potbelly stove, which even an inexperienced home craftsman can create. The main element of this design will be the housing; it will be necessary to make two holes through which fuel will be placed inside. The system must have a vent and a chimney. The last element is quite often connected to the compartment where the ash collects. To make cleaning the oven easier, another door will need to be installed in this place.

If you make a stove from a gas cylinder with your own hands, then the chimney should not be laid along a short path, while most of the heat will evaporate outside. This approach cannot be called rational, so experts advise installing a broken-shaped pipe. This way you can improve your work efficiency heating device. You can use coal, firewood, old clothes and even household garbage as fuel. The potbelly stove also attracts craftsmen with its simplicity and versatility, because with its help you can not only heat rooms, but also cook food.

Preparation for work

If you are making a stove from a gas cylinder with your own hands, you must first prepare the container for use. This procedure must be carried out without fail, otherwise the gas may explode from the impact of a spark that occurs during the cutting process. The technician must unscrew the valve and allow the remaining gas to escape. The container should then be turned over and the condensate drained. Its smell cannot be called pleasant, so it is worth collecting the remains in a container.

The cylinder is installed vertically and filled with water, this will allow the remaining gas inside to be removed, after which the container is turned over on its side, which will allow the liquid to be drained, now the cylinder can begin to be cut. Before starting work, it is important to determine how the potbelly stove will be located: horizontally or vertically.

The first option for making a furnace

A do-it-yourself wood-burning stove made from a gas cylinder can be made on the basis of a horizontal structure. Initially, you will need to cut off the upper part of the cylinder, and then install it inside. It should be made from reinforcement, arranging the elements like a snake. Installation of the grate is accompanied by welding work, after which you can work on the front of the stove. On a sheet of steel you need to mark the outline of a circle, the diameter of which will be equal to the outer contour of the cylinder. Next, the part is cut out, and two rectangular holes are marked inside the circle. The first is necessary for supplying fuel, and the second will act as a blower.

Main stage

If you make a stove from a gas cylinder with your own hands, you can see the photo in the article. Using a grinder or chisel, you will need to cut out the intended holes, which were discussed above. The curtains should be attached to the finished lid by welding and doors should be installed on them. The latter must be sealed with asbestos-cement cord. At this point, we can assume that the front part of the oven is ready; we can move on to working on the back part. This stage provides for the arrangement of a chimney, for which you need to make a hole with a size equal to the diameter of the pipe. A chimney is installed in it the desired shape, which should be made from thick-walled pipe.

Making a vertical furnace

If you are making a stove from a gas cylinder with your own hands, step-by-step instructions will be useful to you. If necessary, perform vertical design you can use one of two methods. The first involves an impressive amount of work, they are associated with cutting, but the installation stage will be accompanied by fewer difficulties. If you decide to choose this method, then using a grinder you need to remove the top of the container. The second method will save time, electrodes and effort, but it cannot be called convenient. In this case, the top must be furnished in place.

Whichever method you choose, you will need to cut a large firebox hole in the front. At the bottom there is a smaller hole for cleaning and blowing. When to make a stove from a gas cylinder with your own hands long burning, the same technology is used. The holes can have arbitrary sizes. At the next stage to installation work the grates are prepared, in the first case these elements are lowered through the top, but the second technology does not provide the opportunity to install the grates in this way; you will need to insert them from below, which is extremely inconvenient.

Ensuring tightness and installing the chimney

If it is made from a gas cylinder, then at the next stage you need to install the curtains, and then weld them to the holes. The door is covered with asbestos-cement cord, which will guarantee excellent tightness. We should not forget that the holes for the chimney still need to be made. Through the hole located in the top cover, exhaust gases will be removed and oxygen will be supplied. Its dimensions must correspond to the diameter of the pipe. You can also provide side smoke exhaust. In this case, you need to work on the side of the body. Experts in some cases advise to equip the knee, but you can draw the conclusion quite directly. If the cylinder has lost its upper part, then the chimney can be installed on top.

Making a furnace for mining

You can easily make a stove from a gas cylinder during testing with your own hands. Its design is not complicated. You can also use sheet metal; to do this, you should make two combustion chambers, to one of which legs are attached. The two compartments are connected by a pipe with holes, and this element is installed on the upper chamber. All these works require the use of a welding machine and the presence of certain skills from the master. If you want to get by with less time, you can use gas cylinder. It has thick walls and will provide fire safety. The air supply to one of the chambers must be made adjustable; for this, a damper is installed, which can be opened slightly if necessary. The chamber where the used oil will be supplied should be dismountable, so you can clean it. The chimney pipe is located vertically; there should be no inclined or horizontal sections. For good draft, the chimney must be selected so that its length is four meters or more.

Work technology

When a stove is made from a gas cylinder during processing, it is necessary to cut off the lower and upper parts of the container, the resulting halves will form the basis of a collapsible combustion chamber. The lower part must be equipped with metal legs, and a hole is made in the upper part into which a pipe with an adjusting plate is installed. There should be a hole in the central part to which a pipe connecting the two compartments is welded. Air holes must be made in the connecting element. The middle part of the container will be used to make a secondary combustion chamber, which is attached to connecting pipe. The final stage will be the manufacture and installation of the chimney pipe, which can be problematic due to the impressive length of the component.

If you are making a stove from a gas cylinder with your own hands, then you should choose the dimensions yourself; these parameters are not so important for the reason that the operation of the structure can be easily adjusted. In garages and workshops, as well as utility rooms, in rare cases there are perfectly flat floors. In order to install the stove correctly and ensure its fire safety, it is necessary to make the legs adjustable in height.

If you notice that oil is splashing out of the combustion chamber, then you need to stop the operation of the device, wait until the surfaces have completely cooled and drain the fuel. There should be no more than 2/3 of it in the compartment. If the waste starts to boil, it is necessary to reduce the air supply using the adjusting damper. For sufficiently intense draft, it is necessary to periodically clean the tank and chimney. The upper part of the product can be removed from soot by tapping.

Conclusion

The production and operation of such a heating device is very cheap. This is also due to the fact that used oil can be easily purchased or taken almost free of charge at a service station. If you are a car enthusiast, then you can have a special container for oil in which you will collect the waste obtained during the warm season.

Reading time ≈ 10 minutes

Many people like to relax in nature with family or friends, have picnics and get-togethers in the fresh air. And, of course, traveling out of town is often accompanied by cooking kebabs or grilled vegetables. To make your vacation pleasant and memorable, you need a good ambience. You can make it yourself using available materials, for example, an unnecessary gas cylinder.

Types of barbecues

Today you can find in stores huge assortment country barbecues and smokehouses for every taste. But it is not at all necessary to buy such a product, because you can make it from a gas cylinder, barrel and other materials with your own hands. Before you understand which design is right for you, you need to know what kind of barbecues there are:

The material for a homemade barbecue should be:

• Durable and reliable.
• Fire resistant.
• Keep warm.

An excellent option is a standard barbecue from an old gas cylinder; it can be easily made using drawings and the necessary tools. Designs of what configuration can be made:

You can use metal knitting needles, curly handles, rods or other details as decoration. The design of the building depends on your imagination, the main thing is that the grill fits into the landscape dacha area. The video master class shows how to make a barbecue container with step-by-step instructions and drawings.

Features and Benefits

You can purchase a ready-made barbecue in the store, or you can make a structure of any configuration and size from a gas cylinder with your own hands. Is it worth using just such a container, and is it safe? According to the advice of experienced craftsmen, an old cylinder with a volume of 50 liters is suitable for production. In this case, the optimal length is considered to be about 85 centimeters, and the diameter is from 30 centimeters.

Let's consider the advantages of models of such homemade barbecues:

A DIY gas cylinder barbecue has several disadvantages:

How to safely disassemble a cylinder

The preparatory stage for creating a homemade barbecue is to dismantle the old metal cylinder and purchase all necessary tools. Before you start cutting the body of the future barbecue, you need to make sure that there is no gas or gasoline left inside. Gasoline is a special mixture of hydrocarbons in liquid form that remains in a container. How to carry out this work safely:

What tools and materials do we need:

1. Door hinges for securing the lid.
2. Adjustable open-end wrench.
3. Metal pipe for chimney.
4. Hammer with screwdriver.
5. Clamps.
6. Electric drill.
7. Apparatus for welding work.
8. Bulgarian.

Secrets of mastery

The entire process of building a homemade barbecue can be divided into several stages, in each of which the following instructions should be followed:

Dutch oven with lid

You can make a barbecue grill yourself from a propane cylinder without spending a lot of time and resources. Instead of throwing away the old gas burner, you can make a homemade brazier using the drawings.

Following the advice of the masters and clear instructions, we begin production:

Brazier on low legs

To bring to life your idea of ​​​​creating your own mini roaster for your garden, you can use an old metal container, for example, a gas cylinder. First, pay attention to the markings indicating the volume and dimensions.

Let's get started:

• We cut out the lid from the body, leaving the sides intact, as in the photo. This way the coals will not fly away in the wind.

  

• Make sure that the rings are exactly along the seams.

  

• Now we have the body and lid of the future mini-smokehouse ready, two separate parts.

  

• We connect the lid to the body with two metal loops. They must then be well welded so that they do not fly off during operation.

  

• We first fasten it using aluminum rivets, as in the photo.

  

• We apply markings on the lid for the location of the handles. They must not be made of flammable material.

  

• To avoid deformation of the cylinder, we attach a corner inside the body. It should also be well welded and serve as a support for the skewers and grate for placing grilled products.

  

• We shorten the legs so that the grill can be transported in the trunk of a car.

  

• It's time to weld the lid to the hinges.

  

• The handles are welded to the outer surface of the lid, which we place on the hinges.

  

  

• We install limiters on the cover to fix it in the open state.

  

• Several holes need to be drilled in the bottom to allow the passage of burnt coal and for better traction. On the opposite side of the holes we cut out slots to fix the skewers inside.

  

• The design is ready for use!

  

  The entire creation process can be seen in the video master class.

There are many options for making barbecues, smokehouses and barbecue ovens various configurations. However, the most in a universal way using an old propane tank is considered. Instructions and advice from experienced craftsmen will tell you how best to make such a design and help you avoid common mistakes.

Going out into nature with a large group means preparing barbecue and other dishes; for this you just need to find acceptable place. On summer cottage or country terrace You can’t do without a barbecue, a tool that provides the opportunity to cook delicious shish kebab or meat yourself. If you create a beautiful grill, it will fit into any interior of the site and add uniqueness. You can make a barbecue with your own hands, using improvised means, such as a gas cylinder or pipe.

Types of barbecues

There are many ways to cook food over charcoal. The brazier has proven itself with positive side, has a number of advantages and is divided into several categories.

1. Portable designs are used when moving frequently. The advantages can be highlighted light weight And simple design, as well as availability ready-made options on the market. The functionality of such barbecues is modest; to prepare dishes different from kebabs, additional equipment will be needed.
2. Portable barbecues have a more durable design; a barbecue made from a gas cylinder falls into this category. The structure can be moved within the site or in a car trailer, has better functionality, and is quite simply made with your own hands from scrap materials.
3. Stationary barbecues are installed in the foundation, have a durable structure and are heavy. The main features are the design of the structure, which, with a creative approach, can decorate a summer cottage.

It is worth considering in more detail the barbecue from the cylinder, because... This device has all the functionality of a stationary device, but is portable. Thus, a self-made barbecue from a gas cylinder can save the owner financial resources, because store-bought models with similar parameters are not cheap. The design can vary in size, regardless of the cylinder used, which makes it possible to accommodate a large number of dishes for cooking with a large company. The height can be adjusted by welding on the legs, this makes the process of frying kebabs convenient and ergonomic. It is also possible to make using available tools decorative look, which will give uniqueness and add beauty to the summer cottage.

Preparation for manufacturing drawings and optimal dimensions

Before cutting a prepared cylinder, you need to remember safety precautions. Sedimentary vapors always remain in gas cylinders, which, when interacting with a spark or welding, can lead to unpleasant consequences.

Making a barbecue from a gas cylinder begins with emptying the container; for this, the main valve is unscrewed and the gas is released. The procedure is carried out with extreme caution, in a well-ventilated area, away from sources of fire or direct contact. sun rays. You can visually verify that the cylinder is empty using a soap solution; just apply it to the outlet nozzle and observe the formation of bubbles. If gas escapes, soapy water begins to bubble, after which it is necessary to unscrew the valve wrench, completely remove it from the cylinder.

After bleeding the gas, it is necessary to turn the gas container over and drain all the condensate. After that, water is supplied under high pressure, which will displace the residual vapors and completely remove the condensate. The water must be drained away from residential premises; the properties of the gas are such that a fire can occur at low concentrations. Compliance with the sequence of all procedures makes the work safe for humans.

To make a barbecue with your own hands, you need to use the drawings. The dimensions are selected in accordance with the volume and shape of the cylinder; with standard equipment, the height is 98 cm, the diameter is 30 cm. The thickness of the walls of the gas container is standard, but may differ from the intended purpose of the cylinder, it is 0.3 cm, the weight of the cylinder is 22 kg.

Cylinder markings

Before making a barbecue from a gas cylinder, you need to mark it according to the necessary parameters. For marking, ordinary chalk is used, the process proceeds as follows:

• The defined diameter is 96 cm, it is easily divided into equal parts. For uniformity, markings are made along the longitudinal seam.
• Marks for placing skewers are set in a horizontal position, 24 cm in each direction from the seam.
• The lid is installed at a distance of 3 cm from the seam.
• A 10 cm deviation is made from the two resulting lines; this is done for parallel fastening of the legs in the future.
• The cut lines for the lid act as boundaries, which were drawn at the first stage (24 cm of indentation).
• If there are internal rings in the cylinder design, it is necessary to carry out the work carefully so as not to damage them. In the future, they will act as a lid holder.

Markings and dimensions of the future barbecue in the drawing

The work of making a barbecue does not require special drawings. It is necessary to mark the parameters of the future barbecue based on the size of the cylinder. A specific design for a barbecue made from gas cylinders is not required, it all depends on the functionality and size of the device. The height of the cut and the lid is adjusted depending on the flammable substances used. If ready-made coals are used, it is possible to cut the cylinder in half; if firewood is burning, the lid should be higher so that the pieces do not fall out.

Selecting a gas cylinder

For a gas barbecue, suitable material is used, including a cylinder. You can find the appropriate cylinder for the barbecue at the dacha if you used propane gas burner, at scrap metal collection points or private advertisements. The gas barbecue is usually made from a cylinder with a capacity of 50 liters. The main criteria when choosing is a complete body without rust and oxides, in order to prevent further destruction of the finished product.

Tools needed for work

To work quickly, you need to prepare the appropriate tool. You will need a set of tools home handyman, as well as a few additional things:

• grinder or grinder;
• welding machine of any type;
• funds personal protection, glasses, gloves;
• metal door hinges in quantities from 3 to 5 pieces;
• rivet gun, rivets;
• chisel, hammer;
• screwdriver, adjustable wrench;
• drill with a set of drills (a 10-12 mm drill is required);
• chimney pipes and legs, the latter using materials from unused sewing machines.

Using tools requires certain skills; the material of gas containers is quite thick, not every novice master will be able to competently saw and weld metal.

How to properly open a propane tank

Safe work is achieved through correctly performed preparatory work. The washed cylinder must be cut into two halves with a grinder; the process is carried out as close as possible to the weld. The side walls cannot be dismantled; their purpose is to protect the fire from the wind and maintain temperature indicators. The support rings should not be sawed; their job is to keep the lid closed.

How to paint

From an aesthetic point of view, it is necessary to paint the cylinder. The process is an individual choice; it is not at all necessary to spend time and energy on it. To paint a barbecue from a gas cylinder, you should use high-quality components that do not decompose when exposed to high temperatures without changing the taste of the food.

Before painting, a layer of primer is applied, which is selected on the market according to the type of paint. Before purchasing, you should study the purpose and instructions; the temperature of the paint should be more than 600 degrees. As a rule, these materials are environmentally friendly, so it is possible to paint the structure not only on the outside.

Making a roasting pan from a metal cylinder

For dacha use Often a regular barbecue is not enough. You can make a barbecue with your own hands from a gas cylinder. To do this you need to follow step by step instructions, in this case you will get a beautiful, high-quality product.

1. The hinges for attaching the lid to the body can be welded before cutting, thereby they are installed evenly, without distortions in relation to the upper part. The cover is secured to the body with a metal rod.
2. A limiter must be installed on the back of the grill to prevent full lowering covers. This will make it convenient to close and open the device during use.
3. The blower holes can be drilled, but it will be much faster to cut them with a grinding tool. Vertical slots are made along the entire length, holes for attaching skewers are drilled with a drill with the required distance.

You can make your own grill legs in various ways, it is also possible to use a ready-made stand from an old sewing machine. The frying process in accelerated mode requires a closed lid, and a pipe must be installed to remove smoke. A cylinder barbecue is made by adding corners to the structure in the inner part for attaching mesh or metal rods.

Brazier steam locomotive

The design, called a steam locomotive, combines several devices at once and has rich functionality. The device is used as a grill, barbecue, smokehouse and regular barbecue. Each component has significance and certain functions.

Brazier "Steam Locomotive"

The design of this type of barbecue made from a gas cylinder resembles a steam locomotive, if you put some effort into the appearance. Additional structures allow you to store firewood, food, etc. When decorated, the locomotive is equipped with all sorts of details to increase the functionality of the device. A locomotive grill made from a gas cylinder allows you to simultaneously smoke food, cook vegetables and fry shish kebab, an indispensable device for a large company.

Features of a barbecue made on the basis of a gas cylinder

Self-production makes it possible to select the necessary parameters and functionality of the equipment. Barbecues made from gas cylinders are popular among owners summer cottages and houses. Installation additional elements makes it possible to cook many foods in different ways. The models offered on the market often do not correspond to the client’s wishes; there are no height adjustments or the design is not capacious enough.

Advantages and Disadvantages

All devices have a number of positive and negative sides. The grill made from gas cylinder equipment has become famous for its simplicity of design and other qualities:

• a simple manufacturing method allows you not even to an experienced master build a barbecue, having on hand tools, devices, as well as visual aids;
• the use of improvised means eliminates financial costs, monetary losses entail only the tool and some additional elements;
• long service life is due to the thick metal in the walls of the cylinder; the manufactured part is not subject to temperature influences or mechanical damage;
• the hinged lid allows you to cook your favorite dishes outdoors in adverse weather conditions;
• The mobile design allows you to move the grill on site or in a car; the reliable bottom makes it possible not to fill the coals with water, but simply cover the grill with a lid.

Disadvantages of a gas cylinder grill:

• the dimensions of the structure may not always allow you to move or install the barbecue in the right place;
• the weight of the structure is large, so moving without special devices is impossible;
• Using firewood will delay the cooking process for a long time.

The nuances of using the resulting product

Correct technical operation makes it possible to use the manufactured structure for a long time. During downtime, it is better to remove the structure indoors to avoid exposure to direct sunlight and the formation of corrosion.

Elimination of foreign odors occurs by burning the inside of the grill. The design must be used away from flammable parts, as a spark may jump out during operation. After use, it is recommended to pour out the ash; high-quality raw materials can continue to smolder for up to several days.

The barbecue is popular among those who like to relax with a large group at the dacha. Standard sizes steel versions of the fryer and kebab maker, which are presented in stores, are only suitable for cooking several pieces of meat. It is inconvenient to make steaks and kebabs on a brick structure. Not everyone will decide to make a stationary structure for a barbecue. It is much easier to make a barbecue from a car gas cylinder with your own hands.

To build a barbecue oven from a propane gas cylinder with your own hands, you will need a 50-liter container about 1.2 meters high. These dimensions are most suitable for a rocket fryer. You can purchase a gas cylinder in any specialized store or order it on the Internet portal. Buying online is cheaper. If you plan to buy a product from an offline store, it is better to give preference to Moscow companies. After all, large companies operate in the capital, the cost of their products is lower average price around the country. In addition, such organizations often offer free delivery.

To create a hot smoked barbecue you will need the following tools:

• Drill.
• Chisel.
• Hammer.
• Bulgarian.
• Metal corner.
• Screwdriver.
• Metal tube.
• There are two door hinges.
• Adjustable wrench.

On average homemade design will cost 2500 rubles. It’s inexpensive, especially when you consider that a ready-made high-quality barbecue costs at least 15,000 rubles. The only disadvantage of a gas cylinder fryer is increased fuel consumption in winter. After all, metal cools quickly due to its low heat capacity. Look at the article about.

Making a homemade barbecue from a gas cylinder

To create an open small barbecue from a freon gas cylinder, no drawings are needed. There are no difficulties with barbecue either. United correct scheme does not exist.

That's why metal structure should be done based on personal preferences and method of cooking.

If you intend to use ready-made coals and a grate, then it is recommended to keep the distance between them small. It is enough to cut the cylinder or barrel evenly along the middle. If the summer resident plans to use skewers, the lid will have to be made smaller in height than the base.

Reviews of homemade cauldrons and barbecues from a gas cylinder or rims mostly positive: the work is not difficult and does not require special knowledge and skills. And there are a huge number of manufacturing options, which can be seen in pictures on the Internet.

Step-by-step instructions are given below:

1. Rinse the bottle.
2. Cut it into two equal parts lengthwise if you are planning a regular grill. Or cut a rectangle in it if you are constructing a barbecue.
3. Decide on the height of the grill and make legs and a stand. They are made from pipes. Four holes should be drilled at the bottom of the base. Insert the bolts and secure them with nuts.
4. Install the cover. To do this, make holes for the hinges. They are fixed with rivets and welded.
5. If you plan to have a removable lid, then metal strips are attached to the edges of the grill.

Open type, without cover

It’s easiest to make a barbecue without a lid yourself. To turn an old gas cylinder into a Dutch oven, cut the container in half and drill holes in the sides to allow air in. Usually, one half of a gas cylinder is enough to create such a product. It is installed on a support made of stones, bricks, or simply on an earthen embankment. You can also make legs and weld them to the bottom.

The production of such a structure takes minimum quantity time. But the grill will not be convenient to use. Yes and appearance its not particularly attractive. Therefore, there will be nothing to brag about to your friends. Many experts advise: if you have at least some skills in welding and forging, it is better to try to make some more interesting model. For example, a brazier in the shape of a steam locomotive or a pig.

How to make a barbecue?

Structurally, a barbecue is a more complex option than a barbecue without a lid. The bottom line is that the side of the cylinder is cut off and attached to hinges - you get a door. Inside the container, a place is made for coals, and a grid is installed for frying food.

To give the homemade barbecue and hearth functionality, improve the air supply to the stove. To do this, do the following work:

If desired, you can modify the design. For example, build a canopy, make shelves, weld an exhaust pipe for good draft. To make the barbecue convenient to transport, two legs are equipped with wheels, and the third is used for support. It is advisable to make the carrying handle long. It is convenient to place a board for seasonings and utensils on it.

Features of a homemade smokehouse

The smokehouse differs from a regular barbecue in its tightness and the presence of a firebox. To make such a structure, you first need to draw up a project. It is easy to find a suitable scheme on the Internet. Next, you should inspect the gas cylinder. If the surface is rusty, the product is not suitable for a smokehouse. If the cylinder is new, you need to drain the gas by unscrewing the valve. Then the container is cut into two parts and connected using hinges. The handles are secured and the legs are welded. A grid is inserted inside the container. Portable homemade smokehouse ready.

As for the stationary options, they are made a little differently. From the edge of the cylinder, where there is weld, indent and draw a line three centimeters lower around the perimeter. You should get two circles. Cut the balloon in the middle with straight lines (to prevent the formation of fire, the vessel is first filled with water). The result is a curved lid and a smokehouse cutout. There are different options execution of the smokehouse. When the work is completed, the product is checked for stability. Typically, if the legs are long, the structure does not sit securely on the ground. Therefore, additional corners are installed at the bottom of the legs.

Making a smoker with your own hands

If you already have experience creating a barbecue from a gas cylinder, you can try to make a smoker that will combine two functions: smoking and frying food. To do this, you will need two cylinders with a volume of 27 and 50 liters, a welding machine, rods for the frame, a pipe elbow, electrodes, a piece of a meter pipe with a diameter of about 15 centimeters.

The smoker grill is created in this way:

Unusual barbecue options

You won’t surprise anyone with ordinary barbecues made from gas cylinders, so summer residents are trying to create unusual options, which in their functionality do not differ from modern factory designs.

For example, they make a brazier in the shape of a steam locomotive or a pig. There is no need to buy special materials. This grill turns out to be cheap, but looks original. The main thing is to know the principles of welding and understand how to make a roaster with your own hands so that it performs all its functions fully and serves for a long time.

How to weld a steam locomotive?

The design in the shape of a steam locomotive combines a grill, a grill, a smokehouse and a barbecue. Externally, the product really looks like a steam locomotive. Such a model is constructed from several cylinders, main pipes and barrels. Each pipe has its own purpose. Steam locomotives with pipes of different diameters look especially good.

To create a grill-steam locomotive you will need three gas vessels. The side bases of the sewing machine are suitable as supports. The container on the right side serves as a barbecue, in the middle - a grill. The first cylinder is installed vertically and a circle with the diameter of the horizontal middle cylinder is cut out on the side. On the middle vessel, cut off the leftmost part and weld the cylinder to the first container. The third cylinder with a cutout on the side is also welded to the second cylinder. A pipe is installed on a vertical vessel and a valve is made. A temperature sensor is installed on the first and second containers. A door is made in each cylinder: it is cut out and connected using canopies. Iron arc-shaped sections are welded onto the door, which will serve as handles.

The wheels are made from the remaining parts of the cylinders. But to add style and originality, many use forging elements. It is recommended to install retractable grilles, tables, and other functional parts. It is important, after creating the barbecue-steam locomotive, to completely cover it with special paint up to 1000 degrees. Without a heat-resistant coating, it is easy to get burned on such a product.

Piglet and pig

The grill created in the shape of a pig or a pig looks interesting. To make it, you only need one old gas cylinder. The container is placed horizontally and the lid is cut out, as in the case of creating a conventional smokehouse. The lid is placed on its hinges. The legs are made of metal pipes. To ensure they hold the structure securely, a grate is installed in the middle of their length. The nose and mouth are made from pieces of metal pipe. The ears are cut out of metal sheets, iron and welded to the part of the vessel that serves as the pig's head. It is recommended to use forging elements.

There are many photos and videos on the Internet showing what such a grill looks like and how it is created. You can make a pig-shaped roaster in just a couple of days. The main thing is to be able to work with a welding tool and be familiar with forging techniques.

The final stage is painting

Paint protects metal surface from rust, as well as temperature changes that occur during use of the barbecue. For dyeing at home, a heat-resistant composition is used that can withstand up to +700 degrees. In this case, the coating will have to be renewed periodically.

The painting steps are given below:

• Clean the surface of the gas cylinder from the old coating. To do this, use sandpaper.
• Degrease with acetone, solvent or alcohol.
• Heat-resistant paint is mixed until a homogeneous consistency is obtained. All clots and sediment are removed. If the solution is too thick, add a little solvent.
• Apply the coloring composition with a roller or brush. To make the surface smooth and beautiful, you will need to paint in several layers. Allow 30 minutes to 2 hours for drying.
• It all depends on the type of paint.

If you plan to paint the grill outdoors, the air temperature should not be higher than +40 and lower than +20 degrees. What kind of paint should I use to treat the structure so that it does not rust? The most commonly used are waterproof acrylic paints in aerosol cans or oil bluing. They dry quickly, are durable, safe and have anti-corrosion properties.

It’s hard to argue with the fact that relaxing outside the city at your own dacha is a real pleasure. After all, only at such moments in life can you truly feel the freshness of nature, prepare aromatic kebabs and communicate with loved ones.

Residents of large cities, who have to live in the constant bustle of the city, especially agree with this. For such citizens own dacha outside the city is a real salvation, where they can take a break from the boring atmosphere of the metropolis.

Naturally, at such a dacha it’s easy barbecue needed, because he is extremely convenient means for cooking over fire ever invented by humans. Cooking on a grill began in the distant past, however, even in our time, many people are not averse to using such equipment.

Barbecue from a gas cylinder

Nowadays, a barbecue with a smokehouse is an indispensable attribute of any country house. As a rule, many summer cottages may have different house plans, sizes, furnishings, but own grill Any self-respecting owner of his own dacha has a smokehouse.

To reduce the cost of such a device to a minimum, it is best to make a barbecue from a gas cylinder with your own hands. Such a smokehouse will practically not differ from one purchased in a store, and the amount of money that will have to be spent on it will be minimal.

Advantages of a DIY barbecue

Since the advent of barbecues, people have constantly modernized their device, adding new functions to it, making it more convenient, and so on. Thus, from the usual frying of meat on a stick, over a fire, we came to modern microwave ovens. Hence, assortment of barbecues so wide that everyone can freely choose the model that suits their liking.

However, as a rule, prices for modern models barbecues are simply prohibitive and not many can afford such luxury. That is why this article was created - because many people are wondering how to make a barbecue from a gas cylinder with their own hands.

So, below we will look at the list of advantages, as well as disadvantages of the design that we will make:

Pros:

• Large sizes that will allow you to prepare a large amount of food for a large company at a time.
• A lightweight design that will not be difficult to make even for those who are in no way attached to physical work. All you need is a gas cylinder and a few hours of time, which will have to be spent on creating your own smokehouse.
• Extremely low cost of barbecue. Anyone who has their own dacha can afford such costs.
• Persistent and robust design, which can withstand the highest temperatures. This increases the durability of your barbecue.
• In the case of a hinged lid, the grill does not have to be brought under the canopy in case of rain. Plus, the grill cover is necessary in order to use it as a smokehouse.

Cons:

• The first advantage of such a barbecue can also be called a disadvantage. The fact is that a large structure cannot always fit into a dacha yard, especially if its area cannot boast of large dimensions.
• A barbecue and smokehouse made from a gas cylinder will not be a portable structure that can be moved at any time to a more convenient place. In order to move such a structure, you will need at least 2 people.
• Of the raw materials that can be used as fuel for a barbecue, only coal can be used, since there is too little space for firewood.

The process of making a barbecue from a gas cylinder

The first thing you need to do is find suitable gas cylinder. In principle, this cannot be difficult, especially for those who survived the refueling time gas stoves using gas cylinders. To make our barbecue you will need a large gas cylinder with a capacity of about 50 liters.

I would like to warn you right away that the manufactured grill and smokehouse will not have a presentable appearance. However, this will not affect the quality of cooking in any way. It's a matter of taste. Of course, you can specially equip it so that it has a neat appearance.

It's also worth knowing that if you don't have a welding machine, as well as the ability to use it, then you will not succeed. In this case, the only way out is to contact a specialist in this industry. In principle, it cannot be called significant drawback manufacturing process, since finding a competent welder who has his own welding machine is not difficult.

Tools and materials that will be needed during the production process

So, in order to make a barbecue from a gas cylinder with your own hands, you will need the following tools:

• Bulgarian;
• two door hinges for the lid;
• a set of tools that includes:
  • hammer;
  • screwdriver;
  • adjustable wrench;
  • chisel;
• drill;
• corner;
• metal pipe.

Manufacturing instructions

The first step is to cut the balloon. This process is quite unsafe, so all safety measures must be observed. Make sure the gas cylinder definitely empty and has no remaining gas.

When cutting a cylinder into 2 parts, be extremely careful, because if there is even a little gas left in the cylinder, it can easily ignite and cause a lot of problems.

So, when the cylinder is cut into 2 parts, you need to wait until all the remaining gas evaporates. After this, you need to turn the container upside down so that all the condensation drains.

In order to remove the unnecessary tap on the surface of the cylinder, you can use a hammer or grinder. In the first case, you can simply knock it off the cylinder, in the second, completely cut it off. The second case is less safe, so we recommend a hammer.

After you have done all the steps described above, you must completely fill the bottle with water and leave it like this for several days. After this, working with such a structure will become absolutely safe and you will be able to do whatever you want with it.

How to make a lid?

As you might have already guessed, the top cover of the grill is an indispensable attribute. Firstly, it is protection from rain. Secondly, this is the introduction of a smokehouse function, without which your grill will not be as functional.

So, we will make a lid for the grill from the already cut off part of the cylinder. The lid must be cut off from the cylinder from the top of the body along the middle. It must be cut from the middle to the edge. After which it is attached to the main part of the grill using door hinges which we prepared earlier. The side walls must be left.

Top assembly

When the top cover is ready for use, it is necessary to attach it to the main part of the grill. To do this we will need, as mentioned earlier, door hinges and a drill.

First of all, using a drill, we drill holes for the hinges, after which we fix the latter with rivets and weld them. Again, if you don't have welding machine or the ability to use it, contact a specialist who will solve all your problems for a small fee.

You can get a little creative here. You can attach additional accessories for your barbecue, such as a handle for the lid. You can also build a removable cover by directing the hinge axes to one side.

Strengthening and fixation

In order to avoid the possibility of deformation of your future barbecue due to high temperatures, it is necessary strengthen the base of the smokehouse.

To do this, it is necessary to weld a metal corner around the entire perimeter. It is best to do this inside the grill. This way, you will kill two birds with one stone: strengthen the base and create a convenient support for the mesh or a skewer from an ordinary corner.

It is also best to make cuts so that the skewer fits perfectly into place and stays there steadily.

Naturally, any grill or barbecue must have its own legs. This did not happen in our case either. For legs, regular ones are best. metal pipes the same length. There should be four of them.

To secure them, you need to drill holes in the corners of the bottom, and then screw the legs using nuts. If after this the legs of your barbecue are not stable enough, weld additional brackets from below.

To top off the whole job, drill a few holes on the bottom of the grill for the burnt coals.

Results

So now you can easily do excellent grill from a cylinder with my own hands. Moreover, as you can understand, this process does not take much effort and is extremely simple.

If you take the whole process seriously and do everything correctly, then such a design can serve you for many years. Moreover, here you can not only fry kebabs, but also smoke various products.

Believe me, if you make this yourself functional product, it will serve you for more than one year, which is good news.