Ways to imitate brickwork with your own hands. Imitation of brickwork: finishing the walls with your own hands Imitation of a brick wall in the interior

Nowadays it is very fashionable to use brickwork in the design of the facade of a house. The brick facade attracts with its sophistication and beauty. But to implement this idea you will have to invest a tidy sum.

There is nothing to say about the efforts made with the time spent on installation. You cannot do without experience and certain skills. Great option will become an imitation brick wall with your own hands. This is an economical and easy way to give your home a classic look.

Finishes of the entire façade, basement or certain parts building. Polypropylene-based resin is used as the main material in production. After such modification, the building looks as if it were lined with real brick, the texture is so accurately repeated.

There are only a few types of panels in the picture, in reality there are many more.

Types of facade panels

There are 2 types of panels that are used as an imitation of a brick wall in the interior.

Homogeneous structure. They are made from polymer materials, which include PVC with modifiers and special additives that prevent the material from increasing and decreasing under the influence of temperatures.
Combined structure. This is a polymer with a layer of thermal insulation to insulate the facade of a house.

Advantages of panels for imitation brick

Compared to brick, the panels are easy to install. You won't need cement mortar, and in general the installation can be done without the help of a specialist. The cladding is carried out very quickly due to the large area of each product.

If you have a frame, installation can be done in any weather, regardless of snow, rain and air temperature. If you use an adhesive base for cladding, then you need to wait for above-zero temperatures and dry weather to allow the mixture to dry.

The panels do not react to temperature changes and cope well with exposure to UV radiation. The material does not absorb moisture, which is the case with original brick causes the formation of efflorescence, spoiling the presentability of the cladding.

Panels, like brick, can last for decades and do not require serious maintenance. The material is very light, which is why it does not exert negative pressure on the foundation. To decorate the facade, you do not have to spend time and money preparing the surface.

Advantages of the material:

frost resistance;
durability;
fire safety: melts only in fire, prevents its spread;
protects the house from heat loss;
water absorption is equal to zero;
the material does not rot;
can be used to cover curved surfaces: cornices and arches;
made in this way, the façade is biologically and chemically neutral;
resistant to aging;
easy to care for;
bending strength;
lightweight (5 kg/sq.m.).

Clinker tiles for brick

The main material used in production is a special type of clay - slate. When looking at such a facing decorative brick no one will believe that it is of non-natural origin, which is why the material is sometimes called artificial stone. This material has only 2 drawbacks: significant cost and heavy weight.

On the right side of the picture is the installation of tiles. It's not a difficult task, but it's painstaking.

This is a modern analogue of brick, allowing you to decorate a wall like a brick. It is very similar in properties and shape to him. Thoughtful design and different production technology have made this material a top seller.

Advantages:

frost-resistant;
has a reasonable price;
does not fade under the influence of ultraviolet rays;
does not require maintenance;
the moisture absorption rate does not exceed 2%;
perfectly tolerates the effects of microorganisms.

Clinker tiles for facade decoration

It is used to provide good sound insulation and reduce maintenance time. This is an excellent material for wall insulation that does not allow dirt, moisture and wind to pass through.

The tiles are very easy to clean and are not afraid of cleaning chemicals. When designing a house, I use clinker tiles; you can build a Gothic mansion, tower or medieval castle. Your possibilities are not limited thanks to a variety of colors and textures.

The material does not transmit sound. Walls lined with such tiles will look like new for more than 15 years.

DIY brick wall made of plaster

Applying plaster to a wall is a labor-intensive and creative process. Only precise execution of the sequence of work will allow you to create a high-quality imitation with your own hands.

We mark the wall. This must be done only when facing part of the wall or its individual fragments. The contours of future bricks are drawn with a pencil and outlined with masking tape.
Apply primer. This is done to create a protective layer that will prevent the formation of chips and cracks.
Laying plaster. To create the finishing mass, gypsum plaster and water should be used. To make a brick wall look realistic, you can add ready solution special dye.
We create bricks. You can make an image on the plaster that will resemble the outline of a brick. To do this, you can use any sharp object with which you can push strips simulating gaps between bricks.
The final stage. After you apply the image brickwork, it is necessary to sand the wall with fine sandpaper. And only now can you start painting the masonry.

Imitation of brickwork made of gypsum

Decorative wall decoration involves the use of the following materials and tools:

dye;
gypsum;
colorists;
molds for filling;
soap solution;
primer;
tile adhesive;
rollers, brushes, spatula.

To give the facade a chic and respectable appearance, gypsum can be used. Using this building material will make the interior stylish and modern.

The first step is to prime the walls. Once it’s dry, take a pencil and make sketches on the wall. You can only draw the edges of the form in which the plaster mass will be enclosed.
Now, using paper tape, carefully paste over the contours of the steps.
Prepare the solution. The consistency should be thicker than sour cream - the solution should not crawl along the wall.
The mass is spread unevenly with a spatula, this will allow you to get bars of different sizes. The thickness should not be more than 1-2 centimeters. Because plaster has a fragile structure, someone could catch a strongly protruding element and break it. The work should be done in parts, apply an area of 50x50 cm, make a brick and apply further.
We make bricks on the wall. You can use a rail or building level. Draw light horizontal lines along the plaster with a spatula. Already using the finished strips, you can cut out individual bricks.
Finishing processing. When the imitation brick has dried, it must be treated with fine-grained sandpaper. After which you can start coloring.

The video is still very good way imitation brickwork

Do-it-yourself brick imitation is the most common design trick today. Its use will allow you to give the facade any style from antique Gothic to country. It takes little time to design, but the result will please you for many years. We hope you have received a complete answer to the question of how to make an imitation brick wall with your own hands.

There are a large number of ways to make the interior of your home unique. Popular modern styles, suggesting a focus on providing free space in the apartment without dividing it by partitions. They also allow you to combine different design solutions, thanks to which you can successfully combine the rough design of brick walls with modern ones. metal objects interior, newfangled technology. Imitation of brickwork will add freshness and originality to the apartment.

There are two main ways that allow you to perform this work with the greatest efficiency and aesthetic appeal:

Imitation of brick using fire-resistant gypsum tiles with the necessary insulating qualities.
An image of masonry in the form of a pattern that is applied to wet plaster.

Imitation using a drawing is a fairly common option that allows you to save on materials. In addition, the work itself is simple and does not require a lot of time and resources.

How can a pattern on plaster make the interior original?

Drawing bricks on plaster can be quite a fun activity that allows you to realize your imagination and creativity. The walls of the apartment will look new if the seam lines between sections are slightly curved. Such slight negligence gives naturalness to the interior and creates the illusion of real masonry.

You can paint the resulting rectangles of bricks in their natural color, or you can leave them unpainted or paint the seams with darker paint. In the first case, you will further emphasize the naturalness of the masonry, and in the second, you will focus on minimalism in interior decoration.

The master also has the opportunity to experiment with the shape of the bricks themselves, making them the correct configuration with pointed edges. Additionally, each rectangle can be processed on the front side, giving it either smoothness or some unevenness and roughness.

Also not a bad option is antique decoration, when all the simulated brickwork is aged due to special surface treatment and painting.

Imitation of brick in the interior with smooth and torn edges

It is not at all necessary to draw every brick even and the same size. You can ask them absolutely different sizes and shape, depict uneven edges and notches. This decoration will look great when decorating a relaxation area in the living room. An interesting option is to combine such masonry with other methods of wall treatment.

Plaster imitating masonry looks like expensive clinker tiles

Preparing walls for decoration

On initial stage work, it is imperative to level the walls. A long rule is used to measure the curvature of a surface. Since the thickness of the finishing layer does not exceed 1.5-2 cm, it is necessary to get rid of serious (more than 2 cm) vertical curvatures of the wall. For this, a plaster mixture is used. Decorating should begin after the mixture has completely dried - approximately a few days after leveling.

To prevent the layer of plaster from peeling off in the future, it is necessary to first prime the walls before applying the solution. It is necessary to choose the right primer depending on the wall material. The number of primer applications is also determined individually.

After preparatory work You can start decorating the walls in the form of brickwork. To do this, two methods are most often used:

Cleaning seams with a scraper;
Application masking tape for decoration.

Which mixture is best to use?

The most suitable material for depicting brickwork on walls is gypsum plaster. When choosing a mixture, it is advisable to focus on brands that are characterized by:

ease of application;
excluding shrinkage;
no need for preliminary or additional puttying of walls;
environmental friendliness of the composition.

When applying a layer of plaster in a layer of 1 cm, the consumption of the mixture per 1 m2 of surface fluctuates between 8-9 kg. It is not recommended to mix gypsum plaster mixture with tiled cement glue to prevent cracking and peeling of the finishing layer from the base.

Imitation of brickwork using a scraper

For application work gypsum plaster It is advisable to have the following tools:

steel spatula with a blade width of 20-25 cm for applying plaster and leveling it;
a narrow spatula with a blade width of up to 10 cm for ease of working with a wide spatula, as well as for correcting small flaws;
a scraper, for which you can choose a chisel or a homemade steel plate with a blade thickness of up to 1 cm;
long rule 1.5-1.8 m;
jointing used by masons.

Depending on the volumes of the prepared solution, the surface area for treatment is calculated. After priming the wall, apply a layer of the mixture with a wide spatula, which is then leveled. Marking of seams can be done only after the solution has dried. To do this, a long rule is applied to the wall, and the boundaries of the seams are drawn in the horizontal plane with the sharp end of the plate. Their thickness ranges from 5 to 10 mm.

When drawing seams, you need to take into account the planned pattern. It is advisable to focus on standard size brick 250x65x120 mm. The most commonly used masonry standards are:

half a brick;
into a brick.

In both cases, when marking, the ligation of vertical seams is taken into account.

When the seams are outlined, they are processed using a scraper. A pattern imitating masonry must be applied first along long horizontal seams, and then along short vertical ones. A scraper is used along the width of the planned seams, removing excess plaster. The depth of cleaning of seams is determined by the design concept, but it is recommended to adhere to a finishing depth of 3-6 mm. The seams can be shaped using jointing.

Using masking tape to outline seams

Using masking tape is a more labor-intensive option for completing the work, since the tape is often difficult to separate or remove part of the mortar from the bricks. After removal, you will additionally need to process the edges of the drawn sections.

After priming, mark the seams on the surface with a pencil and stick narrow masking tape on them.

If you decide to use this approach, you should first prime the wall. Then future seams are drawn out with a pencil. This must be done before applying plaster. The markings can be taken as standard - half a brick or a brick. Masking tape is applied to the marked seams, the ends of which should be brought out beyond the boundaries of the treated area.

The gypsum mortar is applied to the wall using a spatula. The seams closed with tape are also covered with plaster mortar. Then the plaster is leveled. It should dry, then pull the end of the tape and carefully remove it. Along with the tape, the plaster from the seams will also be removed. You should avoid delaying the process, because if the mixture dries completely, it will not be possible to remove the tape correctly.

Surface painting

After creating the seams, it is advisable to eliminate all defects in appearance drawing and let the plaster dry. The remaining mortar on the edges is removed with a dry cloth until the mortar is completely dry. A damp sponge will help make the edges smoother and smoother.

Then a layer of paint should be applied to the prepared drawing in two stages:

Paint is used to paint the entire wall. You can work effectively with a brush or spray.
Using a brush, apply paint of the selected color separately along the entire length of the seams.

Using the method of simulating brickwork in decorating the interior of premises is a good decision, enlivening the atmosphere and giving the apartment originality. You can do this work yourself, choosing the color of the masonry, dimensions, shape of the seams and brick sections.

Video: Plastering brick walls with your own hands. Interior decoration - imitation brick

The brick wall is relevant among various styles interior, but when it is unrealistic to build it, then you can imitate in some way. In this article we will look at how you can paint a brick wall without resorting to the services of artists. Three methods will be presented that require simple materials, a little patience and accuracy.

What does it look like

Painting a wall like brick is perhaps the most cheap way its imitation. Plus it's practical. While wallpaper can get dirty or damaged by pets, this will not happen with painting. Unlike wallpaper, you don’t have to rip off the paint if you get tired of it—you can simply repaint the wall.

Painted brickwork, of course, does not look as impressive as the original, but it will also suit any design solution. A clear example of this is in the photo below.

On the prepared and dried background, you need to make a stencil with narrow masking tape - these will be masonry joints. The size of the bricks may vary depending on your preferences. If at this stage you are not lazy and glue the masking tape evenly, then in the worst case it will take 3 hours, depending on the size of the wall.
Next, paint the entire wall brick color roller, but you can use a spray gun. Let the paint dry thoroughly, after which you can remove the tape.
In order not to get confused during marking, you can divide each brick in half - this is already a vertical masonry joint for bricks at a higher level, and mark the brick itself with a cross using a simple pencil.
As a result, you will get a neat imitation of brickwork.

Method 3: using foam rubber

It is advisable to take several pieces of foam rubber, in case the first one becomes very hardened by the paint. The shape and size should be like a real brick, that is, rectangular in shape, approximately 25 cm wide and 6.5 cm high.

Dip the foam rubber stamp into a pre-prepared tray of paint. Do not forget to remove excess paint from the stamp, it can ruin the entire composition.
Then apply the foam to the wall, thereby leaving an imprint.
Thus, leave stamps in the form of a brick along the entire desired section of the wall. Try to leave equal space between bricks.

Highlighting volume and texture

This is perhaps the most important part of finishing - without this stage the work done will not look as natural and natural as possible. In addition, the given methods for decorating bricks are suitable for all three methods of simulating masonry.

To make the painted brickwork more realistic, it is necessary to add additional shades. To give the appearance of volume, the upper edge can be lightened, and the lower edge, on the contrary, can be darkened.
To give the wall a little “carelessness”, you can add various strokes and strokes with a sponge, thereby creating the effect of antiquity.
In order for the pattern of masonry joints to look “deeper”, it should be outlined with a thin brush, a shade slightly darker than the main one.
When you apply a drawing, mistakes in the form of random lines and extra spots are quite possible. They will need to be removed immediately, using ordinary water, because acrylic paint dries very quickly.

Even without any artistic skills, you will be able to paint a wall like a brick, the main thing is to avoid making gross mistakes.

We hope that the article was useful to you. Leave your questions and feedback in the comments below.

One of fashion trends in the decoration of the premises - a brick wall. Good for those who have a brick house. All they need is to knock off the plaster and slightly “tamper” what is available. What should the rest of us do? There are wallpapers and brick-like tiles, but not all of them are plausible, and good ones cost almost as much as a natural brick wall. The best option in this case - a self-made imitation brick for interior decoration. Moreover, “bricks-tiles” can be made separately, or you can decorate the entire wall in one go.

How to make an imitation brick wall: a short list of methods

The easiest way is if you have brickwork hidden under the plaster. Beat the plaster, clean the seams, prime and paint. The result is a natural brick wall. Moreover, it will look quite “old” and vintage. Those who are less fortunate will have to imitate this brickwork. Good news The fact is that there are many ways, inexpensive materials are available, you can make a “brick wall” on concrete, plasterboard, plywood... any more or less durable surface. By the way, most techniques take little time. So, here's how to make imitation brick for interior decoration:

This is just a short list. There are several technological differences at each point. So imitation brick for interior decoration can be done in at least a dozen ways. Let's talk about some in more detail.

sawing brick

The idea of replacing expensive “brick-like” finishing tiles with bricks loosened into plates seems reasonable. But you need a brick good quality, without voids, inhomogeneities, underburning or overburnt areas. In general, you need an expensive brick. Or old.

An example of sawn bricks... but these are two “beautiful” parts

It's better to cut it circular saw with water cooling. It will work out decorative tiles“brick-like” in natural color. The thickness of the tiles is at least 8-10 mm. The advantages are clear: low price, no need to paint - there is a natural color. These homemade brick tiles are then glued to the walls using regular tile adhesive.

We lay out any texture from sawn bricks. And this is for decorating external corners

But there are also disadvantages: you need a good quality brick, but you still have to find it. When cutting, the plates may break. Only two of them are obtained with beautiful surface- extreme. The rest will have to be modified manually, creating relief. It’s tedious, dusty, time-consuming, difficult, and it’s not a fact that brick imitation will actually be learned “at the level.”

Despite all the shortcomings, this method is used. And this is, perhaps, the only option for homemade imitation of brickwork, which can be used for exterior finishing . For these purposes (finishing the facade of a building), by the way, you can cut the brick into two halves. Everything is cheaper than buying tiles.

How to draw brickwork on a wall

If “wet” or “dusty” work is not your thing, but you know how to draw at least a little, you can paint a brick wall. You will need acrylic paints, brushes, a pair of natural sponges, masking tape, and thick paper plates for mixing paints. When thinning paints, remember that acrylic paints darken as they dry. And one more thing: they dry quickly, but freshly applied ones can be removed with a clean cloth soaked in water.

First we prepare workplace: cover the baseboard and adjacent floor with polyethylene or old wallpaper (it’s better to fix it with tape). Use masking tape to outline the boundaries - at the top, on the sides. At the bottom there is a limiter - a plinth, although in order not to get dirty, it can be removed.

Drawing bricks on the wall

Paint the wall white semi-matte acrylic paint. Leave to dry.
Preparing the background paint. In one of the paper plates, mix 1/6 part umber, 1/6 black paint and 4/6 titanium white. Immediately prepare a little paint, apply it to the wall using a sponge, simply applying the surface soaked in paint to the wall. You shouldn’t try to make a solid background - it should be torn and textured. In some places we apply the paint more densely, passing twice, in some places we apply a more transparent layer.
On a dry background, draw several rows of bricks by hand, not using a ruler. We focus on the standard for masonry: 25 * 6.5 cm, seam thickness - 0.8-1.2 cm. When marking, keep in mind that using this technology it is easier to make the seam a little narrower by painting it, than to try to widen it later.
To paint “bricks” you need to mix ocher and sienna in different proportions, getting different shades“brick” colors - from yellowish-orange to brownish. We got some shade, painted several “bricks” in random places. We mixed a new batch and painted over the other bricks. We apply the paint with a brush, without trying to get a uniform surface or a dense layer of paint - the background layer is visible. The edges of the “bricks” also should not be smooth.
For a traditional red-brown color, to sienna and red ocher, add a little light ocher and a little white. You can paint several bricks in a row with this color.
One more shade - to the above composition we will add brown mars and a little water. Apply with a brush or sponge - as desired.
If you add white and burnt sienna to ocher and sienna, you get another color.
We paint all the bricks in random order with these shades.
We dilute white and a little ocher, add water. Apply the composition with a sponge, acting as a tampon.
We take the old one toothbrush and burnt bone paint. We dip the bristles in paint and spray them on the wall, imitating the heterogeneity and texture of clay bricks.
We add volume to the bricks: dip a thin brush in a mixture of umber and white. We bring all the bricks from below and to the right or left. Everything is on one side, depending on where the window is located (on the side opposite the window). The thickness of the liner varies, since the masonry and the bricks themselves cannot be ideal.

It takes much longer to describe than to do it all. A beginner can draw about 30 squares of imitation brickwork in a day. For maximum verisimilitude, there are several secrets, which we will discuss below.

Final touches

To ensure that the brickwork painted on the wall is as close to natural as possible, there are several little secrets:

With some skill and effort, you can ensure that the painted brickwork looks like the natural one. The main rule: imperfection and heterogeneity.

Imitation brick for interior decoration using plaster mortar

The general idea is simple: a layer of plaster or tile adhesive is applied to the wall, and a seam is cut/pressed into it. After processing the edges of the “bricks” and seams, and painting, the result is a semblance of brickwork of varying degrees of plausibility. Everything is simple, but there are significant differences and nuances.

What and how to make a solution from

The first question that arises is: what kind of solution is needed and from what? There are many recipes. Here are some options:

Regardless of what you make the solution from, it should be semi-dry and should not leak under any circumstances. It will not need to be leveled, so its plasticity is not important to you, and the adhesive ability will be provided by additives - tile adhesive and PVA. To adjust the consistency, add water in small portions.

Surface preparation

The wall on which we will make imitation brickwork does not have to be even. It should be free of dust and dirt, crumbling fragments and particles. This is where the requirements end.

The process of preparing the wall is a careful approach: first they make markings

Before starting work better wall prime. The type of primer depends on the substrate. If the wall is concrete or loose, walk with “concrete contact”. It will bind crumbling particles and create an adhesive surface on which any composition fits perfectly. If we are decorating plywood, gypsum board or other similar material, we can do without a primer, or we can coat it with diluted PVA.

Technology No. 1. We use thin tape to draw seams

First, we paint the wall to match the color of the seams between the bricks. Some are planning gray-brown, others white-gray. We cover the wall with paint of a suitable shade. Using narrow masking tape (1 cm or slightly less/more), apply markings to the prepared base. The tape will mark the seams between the bricks, so stick it horizontally, at a distance of about 6-6.5 cm from each other. When the horizontal lines are pasted, glue the short vertical ones. They are 23-25 cm apart from each other - this is the length of a standard building bricks, but decorative ones can be shorter.

Now we take the solution and apply it to the wall. The layers are unequal, the thickness is 0.3-0.5 cm. We apply it “as it happens”, without achieving flat surface, smooth transitions... As it turned out, so be it. We only avoid obvious bald spots through which the wall shines. We filled the area, took a flat trowel (grater), and slightly smoothed out what we got. Leave until slightly dry: so that when you press with your finger, the composition is slightly pressed through.

We pry up the ends of the horizontally pasted strips of adhesive tape in any place (when gluing, leave the “tails”), pull, removing along with the solution adhering to the tape. We remove the entire mesh. The edges of the “bricks” turn out to be torn and uneven. This is fine. Even good.

Take a toothbrush or paint brush with fairly stiff bristles. Use a toothbrush to go along the seams, removing any remaining mortar. At the same time, the edges of the bricks are rounded. Then we take a wider brush and use it to go over the surface, adding naturalness and removing too sharp edges. Leave to dry at room temperature for approximately 48-72 hours. Do not force dry it - it will crack. Although, if you want to have cracks... If the composition was not painted in bulk, it's a matter of painting.

Technology No. 2: cutting the “seams”

This method of simulating brick for interior decoration takes less time: no tape is required. Apply the solution to the surface of the wall. Everything is exactly the same as described above, only the layer can be thicker - up to 0.8-1 cm. After waiting until the solution “sets” a little, we mark the seams. Here again there are options:

The second option is more accurate. But you have to be careful not to make it too smooth. Although, due to the fact that the hand trembles, the seam “walks” slightly, which gives a more believable look.

Having made the horizontal seams, we proceed to cutting the vertical ones - also by hand. The width of the bricks is about 6 cm, the length is around 23-25 cm. Having finished, we wait for 12-14 hours. Until the composition has set enough to be picked out. When the concrete begins to crumble under strong pressure, take a wide screwdriver (the usual one with a “spatula”) and use it to pick out the solution between the cut strips.

In progress…

When the seams are cleaned, take a stiff brush or brush and remove the remaining mortar and crumbs. The bristles on the brush should be fairly stiff. If the solution is dry, you can try more drastic measures - a wire brush.

Technology No. 3: saw seams

This method of making imitation brickwork for interior decoration differs only in that instead of a knife we take an old hacksaw blade.

After waiting until the solution sets and does not slide, we use a saw to mark the boundaries of the seams. Here you choose one of the methods described above. But you don’t have to wait any longer: use a hacksaw to paint out the seams little by little. Long horizontal seams are quick to make, but vertical ones are not very convenient, since the fabric is not very suitable for short distances.

This method is good because there is no danger of “over-drying” the solution. You can do the “jointing” as soon as the solution hardens a little. In this state, it is easier to round the edges of the bricks, giving them a natural “old age”. The downside is that you have to get used to it, otherwise you might end up doing something bad.

Making a mold for casting brick tiles from plaster

An imitation of brick for interior decoration in an apartment or house can also be cast: you can make gypsum tiles in the form of bricks yourself. To do this, an impression is taken from interesting specimens of bricks (a mold is made to form an artificial finishing stone), then gypsum solution is poured into it. The resulting tiles are used for wall decoration. This technology is good because it allows you to prepare several forms in which you can make bricks different colors for different rooms.

We find bricks of interesting shape and several almost ordinary ones, but with various minor defects. We will use them to cast the mold. It is desirable that there be at least a dozen of them, or better yet, more. “Artificial brickwork” will be more varied.

On the side that we will “multiply”, apply grease or heated wax mixed with kerosene. This is necessary so that the silicone does not stick to the surface. When everything is dry, apply a layer to the treated side silicone sealant. The layer thickness is 1-1.5 cm. Leave until the silicone is completely polymerized (the time depends on the type, it is written on the package).

When the silicone has hardened, take polyurethane foam and coat the mold without removing it from the brick. After the foam has hardened, remove the brick and level the bottom of the mold so that it stands level. Can be used by filling with gypsum mortar. It sets quickly; if you have a dozen molds, in 2-3 days you can make tiles for a couple of squares simulating a brick wall. By the way, gypsum mortar can be painted in bulk. Then new cracks and chips are not a problem - just like a brick.

How and what to paint

Recently, a white brick wall has become fashionable. If you are going to do just this, there are no problems: apply the seams with a brush, use a roller to apply the surface. If you want something that is not too monochromatic, add a little tint to the base color composition - gray, brown, yellow... or even pink or blue. Paint with this paint. Add more white to the remainder and add highlights with this lighter composition using a semi-dry roller, sponge, or brush. If desired, you can apply the top “shadows” with silver, bronze, adding a little gold. Here's how you like it best.

Imitation brick in the bedroom - looks very stylish

If the seams in the imitation brickwork should be darker, go over them first with a brush. Then, using a roller with short or medium pile, we paint the very surface of the bricks. If you take a roller with even shorter pile, dip it in paint of a different shade (lighter or darker - it depends), in bronze, silver, gold, etc. and with this roller, quickly, lightly touching, paint over the most protruding parts, you will get an even more interesting effect. In general, you can experiment. With this approach, imitation brick becomes a design object and the main interior decoration.

Reading time ≈ 4 minutes

One popular trend in interior decorating has been gaining momentum lately. This is what we're talking about interesting option, like an imitation of a brick wall - of course, many have encountered this phenomenon more than once. Imitation - because in fact the wall is not brick, but simply finished in such a way that the appropriate impression is created. In this article we will look at all the stages of how to imitate a brick wall with your own hands (see video, photo).

Marking

The first step is to prepare the walls for further processing. To do this, you need to thoroughly clean the surface: peel off the wallpaper, level it, smooth out unevenness (use sandpaper).

Next, you will need a “model” of the brick. You can cut the end of the proposed brick from cardboard or a piece of linoleum (there are other options). Dimensions 25x6.5 cm are standard. It is necessary to mark the seams; indentation - 1.5 cm around the entire perimeter of the workpiece with outside. One more seam is needed in the middle - so that it looks like two halves of a brick. Further it will become clear why you need to do this.

You need to lay out the “bricks” from the floor to the ceiling. We retreat from the bottom 5-10 cm. Next, we use a simple pencil and outline the first corner “brick”.

The general technology is as follows: you need to start tracing from the corners of the wall, since these places are the most difficult, then along the edges, then move towards the center.

You can watch this process in more detail in the video.

Primer

Next, to create an imitation of a brick wall, you will need a primer; it is recommended to use a non-concrete contact primer. It is diluted in the standard way, then the solution is applied to the wall using a roller. This is done so that the mixture lays down clearly and firmly. This process will not affect the markup - there is nothing to worry about.

Application of the solution

Masking tape is applied to the wall, and at the joints of the “bricks”. It is recommended to glue the horizontal lines first, and then move on to the vertical ones. The sticker must be applied overlapping.

The solution is made from tile adhesive and plaster (50 to 50). It should be noted that imitation of a brick wall in an apartment made of plaster is not only simple and beautiful, but also reliable option finishing.

Then the plaster is applied using a spatula (or even by hand, as it is easier and faster, but do not forget to use special gloves in this case).

This point is very important, because if you wait for time, you won’t be able to tear it off. In principle, this is the main secret of the technology. There are some more nuances - use in in this case plaster is not allowed: it dries instantly - and you won’t be able to completely free up the space between the fragments.

Shaping the “bricks”

Next we need to discuss another important point, namely, giving shape to imitation brickwork. There are many ways, but the simplest one is to use a chisel, spatula or tablespoon. This action must be carried out if the solution was applied by hand (that is, unevenly).

Preparing the surface for painting

First you need to clean the surface: sweep away the dust with a broom, use brushes, paint brushes, sandpaper.