Mesh to imitate brickwork. Do-it-yourself decorative brick plaster: video tutorials of simple solutions

Brick is a strong, durable material used primarily for building walls, interior, exterior finishing. But it is not always possible to use it - voluminous, thick bricks will make small room quite cramped. Because for finishing works in residential, office premises high-quality imitation brickwork is used. There are a great many options for its execution, they differ in the degree of complexity and similarity to natural brick.

In the interior of which rooms can brickwork decor be used?

Making building facades and interiors from brick is always beautiful. But you won’t be able to use real bricks everywhere - they significantly make the floors heavier, and not everyone has the mason skills to make high-quality masonry.

Decor that imitates masonry made of red, white, or any other brick, looks good in almost any room. For spacious rooms dark, cold, rich colors are suitable; for cramped, dimly lit areas - lighter, warmer ones.

This design is most often used in loft, industrial, art-believe style interiors, less often in classic, modern, minimalism, Provence. Fake masonry indoors can cover all the walls of the room, frame window openings, door frames, and have the appearance of narrow, wide, or medium dividing strips. Also, with its help, separate logical zones are highlighted, a fireplace and arched structures are designed.

The more spacious the room being decorated, the larger the brick images are used for it and vice versa.

In the hall

The front or hall is a kind of “face” of the apartment; the entire interior design “dances” from it. Here, brick finishing is acceptable on all walls, with rare inclusions of appropriate decor - painted ivy branches, decorative cracks, etc. Excessive long corridor zoned by vertical brick lines, arches located at the same distance from each other - this is how adjustment of its shape, size, and height is achieved.

In the living room

In the hall, most often, not the entire room is decorated with brick props, but only one of its walls. A fireplace or false fireplace looks organic here, looking as if it were made of real brick, with several zoning partitions. If the living room is completely combined with the kitchen, then only the kitchen or living room. Let’s assume the option of creating a brick dividing strip between separate zones. Bottles, boxes with colored bricks painted with acrylic, pictures painted using the decoupage technique, made using ordinary putty will organically complement the overall picture.

In the bedroom

In the bedroom, not only the walls are decorated with brick decor, but also the podium (if there is one) on which the sleeping area. The same design will allow for beautiful zoning large room, finishing only the mini-office or dressing area with brick. Photo wallpapers are best suited ceramic tile not recommended - it's too cold.

Even a minimally embossed imitation of brick becomes voluminous with proper lighting placement.

In bathroom

The requirements for imitation brick in a bathroom are: special requirements– it must be moisture resistant, not destroyed, not deformed when exposed to direct water. Ceramic or flexible rectangular tiles, polystyrene foam painted with moisture-resistant paint are suitable here. The color depends on the size of the room - the more cramped it is, the lighter the coating is chosen.

During installation, waterproofing materials, silicone sealants, etc. are used.

In the kitchen

Imitation brick for this room is decorated kitchen apron, made of plastic, glass, with a pattern printed on it. All materials must be waterproof, which is especially important for the area near the sink and gas stove; they must be easy to clean from grease without the use of harsh abrasives or aggressive detergents.

On the balcony, loggia

Insulated, glass balcony, a spacious loggia can be combined with any room - bedroom, kitchen, living room through the same covering with the main room. As an option: the room is finished with white or yellow painted brick, the balcony is finished with a darker imitation of plaster. Here, plastic panels are most often used together with insulation made of foam plastic, polyurethane, mineral wool and etc.

In the nursery

Brick decor is rarely used for children's rooms; it looks no less organic than in other rooms. This design is often used in teenage rooms - industrial, loft, pop art and similar styles, almost in their pure form, look most organic there. You can decorate a room in this way with your children, simply by depicting bricks using acrylic paints, watercolors, gouache, and markers. The effect of an old brick will be achieved if you draw small cracks here and there with a gel pen.

Soft, flexible tiles - advantages, disadvantages of the material

Soft tiles are one of the most “believable” variations of creating realistic masonry. Flexible option waterproof, which is important when used in wet areas of a bathroom or toilet, home pool, or greenhouse. This material has significant impact resistance, durability, it is vapor permeable, resistant to mold and mildew, easy to process, does not change color from exposure to the sun, and has a beautiful appearance. Also, the positive properties of flexible tiles include the fact that they can be installed not only on perfectly smooth walls, but also on convex and concave interior elements - arches, internal and external corners, window slopes, brackets, fireplaces, round columns, small architectural forms, having a complex configuration.

Necessary tools, installation steps

To decorate the interior with “soft brick” you will need some tools available in almost every home:

• a metal spatula, 13-17 cm wide, with which you will stir and apply the adhesive;
• spatula 16-19 cm wide, with teeth, about four mm high;
• ruler made of wood, plastic or metal 100-150 cm long;
• building level 100-150 cm long;
• a brightly colored centering cord for marking straight lines;
• large sharp scissors;
• a simple construction pencil for marking;
• a medium-hard brush 10-13 mm wide to smooth the seams between the tiles.

Materials needed:

• the flexible tile itself of a suitable color and size;
• tile adhesive - dry mixture in a paper bag or ready-made mixture in a plastic bucket;
  high quality primer.

Step-by-step work process:

• the surface that is decided to be decorated is first thoroughly cleaned of old coatings and leveled;
• after the wall with the leveling compound applied to it has dried, it is primed with an antiseptic so that fungus and mold do not “start up” under the cladding, and adhesion is maximized;
• After the layer has dried, the tiles are installed directly. It is important to do it at a temperature not lower than five to seven degrees, since at a lower temperature the adhesion of the tiles to the wall is reduced. This will negatively affect the appearance of the finished surface; individual parts may generally fall off quickly;
• Next, the wall should be drawn into identical rectangles, where tile adhesive will subsequently be applied. If you intend to decorate the entire wall completely, it is mandatory to mark the limiting lines at the top and bottom;
• adhesive composition It is not applied evenly everywhere, but only on individual zones measuring 50 by 100 cm. The layer thickness is two to four mm. Application is done with a flat spatula, after which the surface is “traversed” with a notched spatula to create grooves;
• The bricks themselves are usually made with parameters of 25 by 12 cm or 10 by 15 cm - the material is easily cut with simple scissors. When laying in rows, the first level starts with a whole “brick”, the second - with half or one third. Before cutting, the material is marked with a pencil and ruler;
• During the installation process, it is important to maintain the same width of the joints between the tiles - usually nine to thirteen mm, but other values ​​are acceptable. The horizontality of the rows is periodically checked with a level - the tiles should not “walk” or move excessively up or down;
• when the row “rests” on the inner or external corner, the tiles are carefully bent and glued, like all the others. Rounded, wavy elements, columns, fireplaces are faced in the same way;
• every time another area of ​​about one area is covered with tiles square meter, the tile seams are smoothed with a wet narrow brush. This must be done before the glue sets and completely hardens;
• no special grout is required for the space between flexible bricks, which significantly reduces the cost of finishing.

Options for rigid facing tiles, their advantages, disadvantages

Rigid tiles are made of gypsum, ceramics, cement, mounted on a concrete, plasterboard wall, etc. suitable design. Such decor often contains various pigments, fiber fibers, and plasticizers. The elements are installed using an adhesive composition suitable for a particular option. The finished finish looks as close as possible to real bricks, especially if they are painted in a suitable color.

Before starting finishing work, you should take into account that solid tiles have quite a lot of weight, creating additional load on the foundation and walls of the room.

Plaster

Gypsum decor has a very diverse design. This material is lightweight, parts can be cast independently using silicone, plastic molds. Gypsum is not recommended for use in damp rooms, as it is excessively hygroscopic. In the living room or bedroom they are often decorated with fireplaces - the microclimate in such a room will be as favorable as possible. The low price of gypsum allows you to create a noble finish at the lowest cost.

Plaster elements can be used to decorate internal and external walls. To process the corners, shaped parts are taken, giving the finish a neat appearance, protecting the walls from chips and mechanical damage.

For installation, gypsum-based adhesive is used, for

For sealing joints, a special grout is used.

Cement

Cement decor also has a low price and is available in a variety of colors - gray, red-brown, white, black, etc. This artificial brick is used even in winter unheated rooms, since it consists of one part of high grade Portland cement, two or three parts of sand. It is cast in silicone molds - the solution can be painted at this stage, or with the help of a roller, sponge, brush, the finished product, which is a wall element of masonry, can be decorated like a brick or stone part. Artificial bricks are textured and feel like real ones.

Clinker

Clinker is relatively expensive, so it is rarely used for interior decoration. It is very durable - this is the option that is recommended for cladding stoves, fireplaces, and external walls of a building. Clinker tiles contain highly plastic clay, pressed and fired at high temperatures - 1100-1300 degrees. Artificial pigments and plasticizers are not added - this material is the most environmentally friendly, reliable, will last a long time without losing its performance qualities, attractive appearance. Clinker is wear-resistant, has high frost resistance, practically does not absorb water, and is not afraid of sudden temperature changes, strong chemicals, and detergents.

Clinker tiles are very decorative - they are available in glossy and matte, coated with a transparent glaze or with a natural rough surface. The variety of shapes, colors, sizes, textures will allow you to choose it for almost any interior style.

Installation and painting of tiles

Glue rigid tiles from various materials can be almost the same. In addition to tools for marking and applying adhesive, you will need a circular saw for sawing tiles, Sander with stone discs. The process of laying rigid tiles is more labor-intensive than flexible ones, due to their large weight and the need to carefully seal the seams between individual tiles.

Progress:

• installation is carried out on the most even surface, previously cleaned of previous coatings, dirt, and grease;
• marking is done with a regular pencil, ruler, the recommended distance between tiles is 9-13 mm;
• the composition of the adhesive mass depends on the material used to make the tile;
• styling is usually done from one of bottom corners. Odd rows start with a whole tile, even rows with half;
• The glue is applied to the wall and spread with a notched trowel. For heavy clinker tiles, it is recommended to apply an additional layer of mortar to the back wall of each element;
• Each subsequent row is checked with a level - while the glue has not hardened, you can make some adjustments. If desired, use direct calibration inserts, which are wooden or silicone strips, about one centimeter wide, inserted between the rows;
• for internal and external corners, special shaped parts are used to make the corners look neat;
• When the installation is completed, the seams need to be filled with grout. To apply it, use a special gun and ready mixture in the tube. As an option, the grout is diluted to the desired degree of thickness, placed in a thick plastic bag, the corner of which is cut off, and the solution is carefully squeezed out into the aisles;
• You should avoid getting grout on the front surface of parts, especially those with a rough surface - it will be extremely difficult to remove;
• To even out the filling of the seams, a special jointing tool is used. This should be done before the grout becomes hard - for about 20 minutes;
• painting is done decorative composition suitable color.

Characteristics, pros, cons of interior panels

Panels for original “brick” interior design are made from a variety of materials:

• hardboard;
• glass fiber reinforced concrete;
• Chipboard and others.

They vary in the degree of similarity to real bricks, size, color, thickness, and durability. Installation of most types is very simple - the wall is literally assembled like a puzzle or the parts are laid end-to-end.

The panels can be wall or ceiling.

PVC, MDF panels

Parts made of polyvinyl chloride are the most popular in modern times due to their environmental friendliness, safety, and relatively affordable cost. In second place are panels made of modified wood-fiber boards. Stores offer the widest range of decor such as “antique”, “wild stone”, etc. MDF is cut with a jigsaw, hand hacksaw, PVC - with sharp scissors, a knife for cutting paper.

The main advantage of the materials described above is that they can easily be used to finish even the most uneven walls, which do not require any prior preparation, leveling, or applying putty. In cases where it is necessary to hide engineering Communication in spacious rooms, the panels are mounted on a frame made of metal or wood. PVC panels are used in rooms with different temperatures, degree of humidity. For sound and heat insulation, a layer of insulation is used in parallel with the panels. MDF in damp rooms do not use - it is suitable for living rooms; the range also includes corner parts.

Embossed panels made of hardboard, fiberglass, fiberboard, gypsum, etc. are mounted in approximately the same way.

Glass fiber reinforced concrete panels

Glass fiber cement parts are durable and beautiful. The material contains high-quality cement and glass fibers (including colored fibers), which greatly increase the strength of the products. When performing external work, reinforcement with metal structures is often used, which increases the total weight of the structure and increases its mechanical resistance to any influences. The material is environmentally friendly and protects the house from radio radiation, but its cost is high and therefore not available to everyone.

Technology, methods of panel fastening

Interior panels are attached to a flat wall using any polymer adhesive, for example, “liquid nails”. For curved, “humpbacked” surfaces, installation will be required metal frame with a special hanging system. Heavy MDF panels are additionally mounted with dowels in three to five places. Fiberglass concrete structures are attached to a flat surface using cement tile adhesive.

Brick-look wallpaper

Brick wallpaper is the cheapest, most economical, but not very durable option. Their main advantage is that special skills and tools for installation are not required, as well as inviting highly qualified specialists. The usable area of ​​the rooms does not decrease at all; after completion of the work there is practically no waste left. Paper and vinyl wallpapers do not weigh down the structure; even thin drywall can withstand them. Liquid wallpaper is easily applied to a wall of any curvature; its implementation is reminiscent of installing cement mortar tiles.

Homemade wall decoration options

There can be several ways to decorate a homemade “brick” wall:

• details are drawn by hand directly on the wall surface;
• you can use a stencil, templates made of plastic, plywood;
• from corrugated cardboard, covered with decoupage napkins;

Polystyrene foam is a cheap, easily processed material. You can get regular polystyrene foam from cardboard boxes from furniture and household appliances. Blocks made of dense polystyrene foam are purchased at construction markets. The work process is simple: bricks of a suitable size are cut out of this material, and any irregularities are sanded with sandpaper. Parts are glued to the wall, ceiling tile adhesive, « liquid nails", PVA glue, painted with acrylic or other water-based paint. The irregularities are pre-created using a soldering iron or a utility knife.
Tip: the preferred size of bricks is 250 by 120 mm, the distance between them is one or two mm.

Using a stencil to imitate brickwork

The stencil is cut out of a thick sheet of cardboard, rubber, linoleum, and purchased ready-made in the store. Paint and plaster are applied using a smooth spatula, spray can, brush, sponge, or fabric roller. The wall is marked, retreating three to seven centimeters from the floor, leaving space for seams of 10-15 mm. The most common size of a purchased template is 6.5 cm by 20 cm; almost any size can be made at home.

If it is planned not a complete, but a partial imitation of brick, the placement diagram is graphically depicted on paper.

Detailed master class on creating brickwork relief using masking tape and plaster

One of the options for finishing an old or new wall “like a brick” is concrete. To work you will need:

• primer mixture;
• high-quality plaster;
• narrow masking tape;
• stationery knife;
• putty knife;
• containers for diluting compounds;
• a drill with a special attachment, another tool for mixing the solution.

The wall is first cleaned of previous decor - wallpaper, paint, plaster, etc., if necessary, it is leveled, and then primed. On initial stage Marking is very important - a marking cord or an iron tape measure is used for it. It is advisable to mark relative to pre-filled strictly horizontal profiles under the ceiling.

Next, narrow tape is glued to the wall so that it looks like bricks. Plaster, tile adhesive, and rotband are applied over the adhesive tape and the entire wall in a layer of five to eight millimeters. After the solution has set slightly, the tape is carefully peeled off, the gaps are leveled using a wooden stack and a hard brush.

Instead of plaster, ordinary tile adhesive is often used; all work is recommended to be carried out with gloves.

Conclusion

Decorating an apartment with fake, painted, glued bricks is a very popular type of decoration. Most simple options easy to reproduce with your own hands; for more complex ones, you will need not only the advice of specialists, but also their direct participation. Various variations of fake brickwork are matched to almost any popular interior style - from classic to loft. You can decorate the entire house with bricks, as well as a small area in the room.

One of the fashionable trends in interior decoration is a brick wall. Good for those who have a brick house. All they need is to knock off the plaster and slightly “tamper” what is available. What should the rest of us do? There are wallpapers and brick-like tiles, but not all of them are plausible, and good ones cost almost as much as a natural brick wall. The best option in this case is a self-made imitation brick for interior decoration. Moreover, “bricks-tiles” can be made separately, or you can decorate the entire wall in one go.

How to make an imitation brick wall: a short list of methods

The easiest way is if you have brickwork hidden under the plaster. Beat the plaster, clean the seams, prime and paint. The result is a natural brick wall. Moreover, it will look quite “old” and vintage. Those who are less fortunate will have to imitate this brickwork. Good news The fact is that there are many ways, inexpensive materials are available, you can make a “brick wall” on concrete, plasterboard, plywood... any more or less durable surface. By the way, most techniques take little time. So, here's how to make imitation brick for interior decoration:

This is just a short list. There are several technological differences at each point. So imitation brick for interior decoration can be done in at least a dozen ways. Let's talk about some in more detail.

sawing brick

The idea of ​​replacing expensive “brick-like” finishing tiles with bricks loosened into plates seems reasonable. But you need a brick good quality, without voids, inhomogeneities, underburning or overburnt areas. In general, you need an expensive brick. Or old.

An example of sawn bricks... but these are two “beautiful” parts

It's better to cut it circular saw with water cooling. The result will be decorative brick-like tiles in a natural color. The thickness of the tiles is at least 8-10 mm. The advantages are clear: low price, no need to paint - there is a natural color. These homemade brick tiles are then glued to the walls using regular tile adhesive.

We lay out any texture from sawn bricks. And this is for decorating external corners

But there are also disadvantages: you need a good quality brick, but you still have to find it. When cutting, the plates may break. Only two of them are obtained with a beautiful surface - the extreme ones. The rest will have to be modified manually, creating relief. It’s tedious, dusty, time-consuming, difficult, and it’s not a fact that brick imitation will actually be learned “at the level.”

Despite all the shortcomings, this method is used. And this is, perhaps, the only option for homemade imitation of brickwork, which can be used for exterior decoration. For these purposes (finishing the facade of a building), by the way, you can cut the brick into two halves. Everything is cheaper than buying tiles.

How to draw brickwork on a wall

If “wet” or “dusty” work is not your thing, but you know how to draw at least a little, you can paint a brick wall. You will need acrylic paints, brushes, a pair of natural sponges, masking tape, and thick paper plates for mixing paints. When thinning paints, remember that acrylic paints darken as they dry. And one more thing: they dry quickly, but freshly applied ones can be removed with a clean cloth soaked in water.

First we prepare workplace: cover the baseboard and adjacent floor with polyethylene or old wallpaper (it’s better to fix it with tape). Use masking tape to outline the boundaries - at the top, on the sides. At the bottom there is a limiter - a plinth, although in order not to get dirty, it can be removed.

Drawing bricks on the wall

1. Paint the wall with white semi-matte acrylic paint. Leave to dry.
2. Preparing the background paint. In one of the paper plates, mix 1/6 part umber, 1/6 black paint and 4/6 titanium white. Immediately prepare a little paint, apply it to the wall using a sponge, simply applying the surface soaked in paint to the wall. You shouldn’t try to make a solid background - it should be torn and textured. In some places we apply the paint more densely, passing twice, in some places we apply a more transparent layer.

   

3. On a dry background, draw several rows of bricks by hand, not using a ruler. We focus on the standard for masonry: 25 * 6.5 cm, seam thickness - 0.8-1.2 cm. When marking, keep in mind that using this technology it is easier to make the seam a little narrower by painting it, than to try to widen it later.
4. To paint “bricks” you need to mix ocher and sienna in different proportions, getting different shades“brick” colors - from yellowish-orange to brownish. We got some shade, painted several “bricks” in random places. We mixed a new batch and painted over the other bricks. We apply the paint with a brush, without trying to get a uniform surface or a dense layer of paint - the background layer is visible. The edges of the “bricks” also should not be smooth.
5. For a traditional red-brown color, to sienna and red ocher, add a little light ocher and a little white. You can paint several bricks in a row with this color.

   

6. One more shade - to the above composition we will add brown mars and a little water. Apply with a brush or sponge - as desired.
7. If you add white and burnt sienna to ocher and sienna, you get another color.
8. We paint all the bricks in random order with these shades.
9. We dilute white and a little ocher, add water. Apply the composition with a sponge, acting as a tampon.
10. We take the old one toothbrush and burnt bone paint. We dip the bristles in paint and spray them on the wall, imitating the heterogeneity and texture of clay bricks.

    

11. We add volume to the bricks: dip a thin brush in a mixture of umber and white. We bring all the bricks from below and to the right or left. Everything is on one side, depending on where the window is located (on the side opposite the window). The thickness of the liner varies, since the masonry and the bricks themselves cannot be ideal.

It takes much longer to describe than to do it all. A beginner can draw about 30 squares of imitation brickwork in a day. For maximum verisimilitude, there are several secrets, which we will discuss below.

Final touches

To ensure that the brickwork painted on the wall is as close to natural as possible, there are several little secrets:

With some skill and effort, you can ensure that the painted brickwork looks like the natural one. The main rule: imperfection and heterogeneity.

Imitation brick for interior decoration using plaster mortar

The general idea is simple: a layer of plaster or tile adhesive is applied to the wall, and a seam is cut/pressed into it. After processing the edges of the “bricks” and seams, and painting, the result is a semblance of brickwork of varying degrees of plausibility. Everything is simple, but there are significant differences and nuances.

What and how to make a solution from

The first question that arises is: what kind of solution is needed and from what? There are many recipes. Here are some options:

Regardless of what you make the solution from, it should be semi-dry and should not leak under any circumstances. It will not need to be leveled, so its plasticity is not important to you, and the adhesive ability will be provided by additives - tile adhesive and PVA. To adjust the consistency, add water in small portions.

Surface preparation

The wall on which we will make imitation brickwork does not have to be even. It should be free of dust and dirt, crumbling fragments and particles. This is where the requirements end.

The process of preparing the wall is a careful approach: first they make markings

Before starting work, it is better to prime the wall. The type of primer depends on the substrate. If the wall is concrete or loose, walk with “concrete contact”. It will bind crumbling particles and create an adhesive surface on which any composition fits perfectly. If we are decorating plywood, gypsum board or other similar material, we can do without a primer, or we can coat it with diluted PVA.

Technology No. 1. We use thin tape to draw seams

First, we paint the wall to match the color of the seams between the bricks. Some are planning gray-brown, others white-gray. We cover the wall with paint of a suitable shade. On the prepared base using a narrow masking tape(1 cm or a little less/more), apply markings. The tape will mark the seams between the bricks, so stick it horizontally, at a distance of about 6-6.5 cm from each other. When the horizontal lines are pasted, glue the short vertical ones. They are 23-25 ​​cm apart from each other - this is the length of a standard building bricks, but decorative ones can be shorter.

Now we take the solution and apply it to the wall. The layers are unequal, the thickness is 0.3-0.5 cm. We apply it “as it turns out”, without achieving a flat surface, smooth transitions... As it turns out, so be it. We only avoid obvious bald spots through which the wall shines. We filled the area, took a flat trowel (grater), and slightly smoothed out what we got. Leave until slightly dry: so that when you press with your finger, the composition is slightly pressed through.

We pry up the ends of the horizontally pasted strips of adhesive tape in any place (when gluing, leave the “tails”), pull, removing along with the solution adhering to the tape. We remove the entire mesh. The edges of the “bricks” turn out to be torn and uneven. This is fine. Even good.

Take a toothbrush or paint brush with fairly stiff bristles. Use a toothbrush to go along the seams, removing any remaining mortar. At the same time, the edges of the bricks are rounded. Then we take a wider brush and use it to go over the surface, adding naturalness and removing too sharp edges. Leave to dry at room temperature for approximately 48-72 hours. Do not force dry it - it will crack. Although, if you want to have cracks... If the composition was not painted in bulk, it's a matter of painting.

Technology No. 2: cutting the “seams”

This method of simulating brick for interior decoration takes less time: no tape is required. Apply the solution to the surface of the wall. Everything is exactly the same as described above, only the layer can be thicker - up to 0.8-1 cm. After waiting until the solution “sets” a little, we mark the seams. Here again there are options:

The second option is more accurate. But you have to be careful not to make it too smooth. Although, due to the fact that the hand trembles, the seam “walks” slightly, which gives a more believable look.

Having made the horizontal seams, we proceed to cutting the vertical ones - also by hand. The width of the bricks is about 6 cm, the length is around 23-25 ​​cm. Having finished, we wait for 12-14 hours. Until the composition has set enough to be picked out. When the concrete begins to crumble under strong pressure, take a wide screwdriver (the usual one with a “spatula”) and use it to pick out the solution between the cut strips.

In progress…

When the seams are cleaned, take a stiff brush or brush and remove the remaining mortar and crumbs. The bristles on the brush should be fairly stiff. If the solution is dry, you can try more drastic measures - a wire brush.

Technology No. 3: saw seams

This method of making imitation brickwork for interior decoration differs only in that instead of a knife we ​​take an old hacksaw blade.

After waiting until the solution sets and does not slide, we use a saw to mark the boundaries of the seams. Here you choose one of the methods described above. But you don’t have to wait any longer: use a hacksaw to paint out the seams little by little. Long horizontal seams are quick to make, but vertical ones are not very convenient, since the fabric is not very suitable for short distances.

This method is good because there is no danger of “over-drying” the solution. You can do the “jointing” as soon as the solution hardens a little. In this state, it is easier to round the edges of the bricks, giving them a natural “old age”. The downside is that you have to get used to it, otherwise you might end up doing something bad.

Making a mold for casting brick tiles from plaster

An imitation of brick for interior decoration in an apartment or house can also be cast: you can make gypsum tiles in the form of bricks yourself. To do this, an impression is taken from interesting specimens of bricks (a mold is made to form an artificial finishing stone), then gypsum solution is poured into it. The resulting tiles are used for wall decoration. This technology is good because it allows you to prepare several molds in which you can make bricks of different colors for different rooms.

We find bricks of interesting shape and several almost ordinary ones, but with various minor defects. We will use them to cast the mold. It is desirable that there be at least a dozen of them, or better yet, more. “Artificial brickwork” will be more varied.

On the side that we will “multiply”, apply grease or heated wax mixed with kerosene. This is necessary so that the silicone does not stick to the surface. When everything is dry, apply a layer to the treated side silicone sealant. The layer thickness is 1-1.5 cm. Leave until the silicone is completely polymerized (the time depends on the type, it is written on the package).

When the silicone has hardened, take polyurethane foam and coat the mold without removing it from the brick. After the foam has hardened, remove the brick and level the bottom of the mold so that it stands level. Can be used by filling with gypsum mortar. It sets quickly; if you have a dozen molds, in 2-3 days you can make tiles for a couple of squares simulating a brick wall. By the way, gypsum mortar can be painted in bulk. Then new cracks and chips are not a problem - just like a brick.

How and what to paint

Recently, a white brick wall has become fashionable. If you are going to do just this, there are no problems: apply the seams with a brush, use a roller to apply the surface. If you want something that is not too monochromatic, add a little tint to the base color composition - gray, brown, yellow... or even pink or blue. Paint with this paint. Add more white to the remainder and add highlights with this lighter composition using a semi-dry roller, sponge, or brush. If desired, you can apply the top “shadows” with silver, bronze, adding a little gold. Here's how you like it best.

Imitation brick in the bedroom - looks very stylish

If the seams in the imitation brickwork should be darker, go over them first with a brush. Then, using a roller with short or medium pile, we paint the very surface of the bricks. If you take a roller with even shorter pile, dip it in paint of a different shade (lighter or darker - it depends), in bronze, silver, gold, etc. and with this roller, quickly, lightly touching, paint over the most protruding parts, you will get an even more interesting effect. In general, you can experiment. With this approach, imitation brick becomes a design object and the main interior decoration.

With the advent of the loft style in the mid-20th century, brick walls became incredibly popular. But there is not always real masonry in the room, so it is often imitated using plastic panels, wallpaper, tiles, etc. In this article we will look at how you can make artificial wall under brick using decorative plaster.

What does plaster look like under brickwork?

Decorative brick-like plaster is used for finishing walls, arches, doorways in apartments, cottages, office or administrative premises. This type of finishing can also be used to highlight individual sections or parts of the wall. Less expensive cement-based compositions are used for cladding building facades. But the most successful look are bricks made of light or red stone, pressed onto decorative plaster.

Below are photos of an imitation brick wall made of plaster in the interior of premises and the decoration of facades.

But ready-made polymer-based compounds are considered the highest quality and most durable: silicate and silicone. They are plastic, easily distributed over the surface and have high adhesion (cohesion), strength and moisture resistance.

To save money, you can make your own decorative plaster from ordinary putty .

Preparing the walls

The walls on which decorative brickwork will be applied require certain preparation.

Curved walls need to be straightened plastering or, for example, sheets of plasterboard.

Remove jet finish. If the decor is planned on an old plaster layer, then it needs to be cleaned, a rough surface created, and treated with an adhesive primer. Unstable areas are knocked off the wall, chips are cleaned and puttied. If the surface has been previously painted, the paint layer must also be removed, otherwise the plaster will not adhere firmly. This is discussed in detail in our article: “Is it possible to plaster over paint: what is the right thing to do?” Read .

Before plastering the wall is primed. Universal is suitable for interior decoration acrylic composition deep penetration. The primer will improve adhesion and bind small particles and dust to the wall.

Imitation of brickwork with your own hands

There are several ways to make “bricks” using decorative plaster. Let's describe each of them.

Making bricks using a stamp and roller

On sale you can find special silicone or polyurethane stamps for one or more bricks. They are carefully applied to the slightly dried plaster layer on the wall, and then also carefully, trying not to damage the print, removed.

If small defects arise when applying the “bricks”, they are smoothed out with a spatula. If the plastered wall does not dry out enough, the print may be smeared. In this case, the surface must be smoothed again with a spatula, wait a while, and apply the mold again.

Another way to create a brick-like imprint on a wall is to use textured rubber rollers. Roll the roller along the plastered wall in a horizontal direction. At a time, you get two to four brick rows (depending on the width of the roller).

Using tape

To create artificial masonry, the location of future seams is marked with a pencil on a dry wall. First, marks are made from floor to ceiling at one edge every 7.5 cm. Then on the opposite side. The horizontality of the lines can be controlled with a bubble or laser level.

Masking (paper) tape 1-1.5 cm wide is glued over the markings. It is not always possible to find such adhesive tape on sale, so you often have to buy bigger size(3 cm) and cut the queens lengthwise.

Paste the horizontal lines first, then the vertical ones. This is a labor-intensive task that will take several hours. What the markup looks like is shown in the diagram:

To make the ends of the tape easy to find under the layer of mortar, they are brought outside the boundary of the area to be plastered.

The wall is covered with mortar directly on top of the tape. Layer thickness 3-5 mm.

After alignment, they begin to pull the ends of the tape. When the tape is torn off, a clear pattern of seams remains on the surface. After complete drying, uneven edges are cleaned. This method will be clearly shown in the video below.

Cutting bricks

Masonry joints can be cut on slightly dried plaster and using available tools - a small spatula, a thick knitting needle or any other pointed objects of a suitable size.

It is necessary to “draw” the seams until the plaster has completely hardened. To prevent the wall from looking too smooth, it is better to go over it with sandpaper after finishing the work. A rough surface with marked seams will look more like a brick wall. To make the wall look realistic, you can add small scratches and chips.

Rusticized plaster

To imitate voluminous bricks or massive stones on the facades of houses, rustras are used - straight seams that divide the surface into blocks. There are several ways to create them:

• using wooden lathing;
• stuffing with metal strip;
• by pulling using templates;
• cutting out with a saw according to the rule (a construction tool in the form of a long ruler).

When creating masonry, it is absolutely not necessary to make the lines too even. There may be small irregularities at the seams, giving the wall a more expressive texture.

Video

How to make decorative brick plaster with your own hands is shown in the following video lesson. The master marks and extrudes the masonry joint using a rule.

The following video shows how to do it using tape.

You can find other master classes on applying decorative plaster in our video section.

Painting plaster bricks

After the plastered surface has dried, it is painted with acrylic, latex, alkyd or water-based compositions. When choosing a color, you can stick with a natural red-brown or experiment by mixing them to create a unique shade.

Color can be added to plaster mixture when mixing it. But in this case, you will have to prepare the solution for the entire wall at once, otherwise the shades in individual areas may not match.

The seams are painted separately with a thin brush. A good technique is to apply two layers of paint. different color: the second is applied a couple of minutes after the first, that is, before it dries. Sometimes individual bricks are distinguished by a different shade from bright yellow to almost black.

If previously brick was considered exclusively in the form building material or a residual phenomenon of old industrial buildings, now it is a great opportunity contribute bright accent in any interior design - from classic to industrial. Brick wall in the interior it always looks original, harmoniously combines with different colors of furniture and textiles, and also fits perfectly into any room. It will add a touch of negligence to the bedroom, coziness to the kitchen, and conservative aesthetics to the living room.

Features of a brick wall in the interior

Such a creative and bold solution in interior design will undoubtedly delight the owners of the house and attract the admiring glances of guests. To make a brick wall look as beautiful as possible, you need to know the winning design options. Then you can be confident in the final result. Here are some of the main features to consider:

1. A brick wall will look amazing in tandem with the following interior designs: loft, eclectic, ethnic, classic, grunge, pop art and avant-garde.

2. Non-woven / vinyl wallpaper or facing material can be a wonderful alternative to real brick.

3. The tone of the wall does not have to match the overall color scheme. It can be two levels darker or lighter.

4. Brickwork can serve good decor for your favorite paintings or photographs.

5. The gloss on the surface of the brick (created using a special varnish) can visually make the room brighter.

6. Light brick goes well harmoniously with red and peach shades, coffee - with beige and gray.

7. If you do choose a brick, you should take care of professional products that can protect it from mold and mildew for a long time.

8. The “brick motif” will look great not only in one design direction, but also in a mixed version of several styles.

9. An interesting combination of wall decoration is brick and mirrors, old music records on the surface and elements of stone.

How to create a brick wall?

Real brickwork

A bare brick wall in the middle of a room is a real decorative composition that can be played out in an original way, taking into account all the features of the room. If you have an interior in an industrial or classic style, then the surface can be safely left rough and unpainted. This decision will be the most loyal. If you want to make it more colorful and rich, you should definitely use an acrylic scuba tank the desired shade. A glossy shiny surface can be achieved using special clinker oil.

Non-woven wallpaper

They will be a wonderful alternative to brickwork. Non-woven fabric is very popular due to its texture, which perfectly imitates natural species finishing materials (stone, brick, wood, glass). In addition, the main difference between non-woven wallpaper is that it can be repainted in any color. This is an ideal option for creative people who can turn their ideas into reality without fear of consequences. A brick wall can easily turn from white to coffee, from gray to lemon.

Vinyl wallpapers

The advantages of this choice include the durability of the material, its wear resistance, ease of maintenance and aesthetic appearance. Vinyl wallpapers They can easily correct unnecessary protrusions and bends, ensure good air circulation in the room (if you leave the wall unsealed), and decorate a corner of the room. It is also worth noting the fact that they can be glued to almost any wall (large or compact, dense or thin), which, unfortunately, cannot be said about the installation of brickwork.

Facing brick

It is often used in wall decoration. This material is much thinner and lighter than construction material. If a solid thick wall can withstand strong brickwork, then facing brick can even fit into a small partition (due to its minimal weight). This is a big plus for those who don't want to lose the bulk of the room, but still want to decorate it with such an industrial detail.

Brick wall in interior design – photo

We have put together an original photo gallery for you. It will prove that a brick wall is a great design option that is appropriate in any design and in any room.

Brick wall in the kitchen interior

The kitchen is exactly that corner of the house where you always want to spend time with family and friends. A brick wall will fit harmoniously into this room, as it can emphasize functionality, but at the same time add the necessary notes of aesthetics and comfort to the atmosphere. Such industrial motifs look great both in gentle style Provence, and in a more daring loft or pop art. The ideal colors of brickwork or imitation wallpaper for the kitchen are sand, beige, gray, red and coffee.

Brick wall in the living room interior

Such a decorative element can turn a simple living room into an original designer composition. The main thing is to choose the right shades of furniture and textiles, as well as complement the overall picture with colorful accents in the form of products hand made, family photographs, aged mirrors - depending on the overall style of the interior. Then a cozy living room will become not only a place for pleasant gatherings with friends, but also a corner for drawing creative ideas and inspiration. A good color scheme for a brick wall for a living room is white, gray and coffee.

Brick wall in the bedroom interior

A great option for refreshing your bedroom, making it more eccentric and individual. A brick wall can create the necessary contrast even against the background of exquisite expensive furniture and paintings. The most optimal options for its location in the bedroom are masonry/wallpaper on a wall with two spacious windows or behind the bed. It is worth noting that brick motifs not only do not conflict, but, on the contrary, look very harmonious with light textiles, without darkening them visually.

Brick wall in the bathroom interior

The bathroom is special place, where we spend precious minutes in the morning before going out into the world and in the evening before traveling to the land of dreams. Therefore, its design should be concise, stylish and functional. This is what it will look like in combination with brick wall. White or beige colors Such walls will visually expand the space, will go well with ceramic sanitary ware, will bring a feeling of comfort, and coffee, bright and dark shades will create the effect of brutality, conservatism and an original approach to design.

Archwood is committed to protecting your confidential information.

The document entitled "Archwood Privacy Policy" contains detailed information about the collection, use and protection of personal data. The terms of this policy apply to all personal data collected on the archwood.ru website.

Consent to the collection of personal data

When visiting this site, some types of non-personal data, such as: the IP address of your computer, the IP address of your Internet provider, the date and time of access to the site, the address of the site from which you came to our site, browser type and language may be collected automatically.

We may also collect navigational information, including information about the pages you view, the links you click, and other actions you take on the site.

Demographic information (such as your occupation, hobbies, gender or interests) may also be collected and may be associated with your personal information.

By visiting the website archwood.ru, you voluntarily accept the terms of the Privacy Policy and agree to the collection and use of your personal data.

Personal data includes:

Information that will be collected at the time you place an order for the purchase of a product and includes your first and last name, billing address, address Email, postal address and contact telephone number.

Please note that we do not collect credit cards or other payment instruments as payment gateways will be used to process your order without storing the information on our website.

You can refuse to provide us with personal data at any time, but in this case Products and services offered by Archwood will not be available to you.

Use of your personal data

Archwood collects and uses your personal data for: - processing transactions; - providing quality service; - conducting research and analysis aimed at improving our products, services and technologies; - further display of the site content taking into account your interests and preferences; - launching competitions, inviting people to participate in them and determining winners; - the possibility of contacting you for various information purposes.

We may send you transactional information such as welcome emails, payment reminders or purchase confirmations.

We may also send you research or marketing inquiries to inform you about new products or services or other information that may be of interest to you.

Disclosure of your personal information

Except as set forth in this Privacy Policy, Archwood does not disclose or transfer your personal information to third parties.

We may disclose your personal information to third party service providers who perform services on our behalf. For example, we may hire other companies to process payments, provide data storage, host websites, fulfill orders and deliveries, assist with marketing, perform audits, etc.

These third party service providers will be permitted to receive personal information necessary only to provide the services. Third party providers are committed to protecting personal information to the same extent as Archwood. Third party providers are also prohibited from using your personal information for any other purpose.

We reserve the right to disclose your personal data if necessary in accordance with the law, legal process and/or based on public requests or requests from government authorities.

Security of your personal information

The security of your personal data is extremely important to us. We follow generally accepted standards to protect your personal information, including:

Limiting access to personal information for those employees who are not directly related to the provision of services; - signing of a confidentiality agreement by employees to protect the client and his personal data; - ensuring that third party service providers sign confidentiality agreements and maintain the confidentiality of personal data and do not use it for any unauthorized purposes; - storing personal data in secure computer systems that are protected from unauthorized access or use.

No method of transmission of information over the Internet, or method of electronic storage is 100% secure. Therefore, while we strive to protect your personal information, we cannot guarantee its absolute security.

Changes to the Privacy Policy

The Privacy Policy is subject to change at any time without prior notice, and archwood.ru will not have any liability to you or any other person. The collection, use and transfer to third parties of your personal data will be governed by the version of the Privacy Policy currently in effect. New versions of this Privacy Policy will be published in this section.

The date of last modification is indicated at the top of this document. The fact that you use the services of the site after changes have been made to the Privacy Policy will indicate that you have given your consent to the collection, use and transfer to third parties of your personal data in accordance with the new version of the Privacy Policy.