Electric heat guns. Electric heat gun: which is better for heating a small room? Rating of heat guns for 2 kW

17.01.2017

The widest range heating equipment, present at modern market, allows you to choose the most efficient device that is fully suitable for specific operating conditions. We will not dwell on all these devices, but will only talk about electric heat guns. What are they and what design do they have? And is it possible to make such a heat gun at home? You will learn about this, as well as much more, after reading this article.

electric heat guns

We should start with what exactly is meant by heat guns today. First of all, they are heating devices representing a group of heat fans. At the same time, they differ from the same fans in their high thermal performance and power. Consequently, here all units whose power is more than 2 kilowatts are classified as electric heat guns.

TOP-3. Rating of the most popular manufacturers

No. 1. Ballu electric heat gun

The world's largest company engaged in the production of climate control equipment. If we consider the range of this manufacturer, then Special attention attention should be paid to the “Foreman” model, which has several modifications.

Among design features can be distinguished:

double body, which is made of stainless steel;
power, which ranges from 1.5-9 kilowatts;
possibility of adjusting the angle of inclination of the device.

Note! The “Foreman” gun will cost from 2,700 to 6,000 rubles. A more specific figure depends on what kind of power we are talking about.

No. 2. "Tropic"

A worthy representative Russian manufacturers climatic equipment is the Tropic enterprise, specializing in the manufacture budget options heat guns. One of the best devices This manufacturer includes models from the TK line.

Of course, the main advantage of all Tropica products is their cost. At the same time, the company properly monitors the quality of the product, as well as ensuring that its technical characteristics fully comply with international standards.

No. 3. Frico

This Scandinavian manufacturer offers high-quality electric heat guns, but in Russia its products are known mainly for small-sized fan heaters from the Tiger series. But in order to efficiently and quickly heat large premises, it is advisable to give preference to the company’s new product – the stationary heat gun SWH02 Fan Heater.

This model is distinguished, first of all, by its ease of installation and operation, as well as automatic adaptation to the microclimate of the room in accordance with the established operating mode.

Note! The approximate cost of the SWH02 Fan Heater unit is from 43,000 rubles.

Design and principle of an electric heat gun

So, what is the device described in the article? To find out, you must understand one thing important point: A heat gun is an unusual device that can warm up almost any room in a short period of time. In other words, this is a device designed for quick heating and effective drying when various kinds technological operations.

You will probably ask yourself another question: why is this device even called a heat gun? The thing is that it is unique in appearance heating unit very similar to the design of a traditional army cannon, but at the same time can efficiently heat rooms.

Most heat guns include the following structural elements:

actually, the heating element;
air filter (present on some models);
high power fan;
thermostat (it is necessary so that the device can function in autonomous mode, that is, it is preset temperature regime in the room from which the gun operates);
metal body, characterized by increased strength characteristics;
thermostat (necessary to prevent overheating of the device).

What is the principle of action itself? And it consists of a series of actions that are performed in a certain sequence.

Stage one. The heating element produces thermal energy.
Stage two. Through a special hole located on the body, cold air enters the device.
Stage three. The air is warming up. A powerful fan pumps hot air, moving it to the desired location in the room.

What types of heat guns can be used?

You need to know this to understand the differences electric models from others. The classification in in this case is based on the method of converting various types of energy carriers into thermal energy. Simply put, all heat guns are classified depending on what kind of energy carrier is used to produce heated air.

Note! If we talk specifically about electric heat guns, they, in turn, are also divided into several types, so we will briefly consider them.

Types and characteristics of electrical appliances

According to the characteristics of their operation, electric heat guns are divided into two categories.

Pros of using electric heat guns

The advantages of the equipment described in the article include:

light weight;
affordable cost (the 220-volt device is the cheapest of all those presented above);
ease of use (the device is activated by pressing just one button).

Minuses

However, there are disadvantages - for example, the described heat guns:

directly depend on the electrical network (it is worth noting that, if possible, devices can be connected to diesel generators);
consume electricity, which is expensive.

Criteria for choosing electric heat guns

People choose electric heat guns for certain purposes, so they must pay attention to the criteria below.

Equipment power calculation

The simplest way to calculate the power of a heat gun is as follows: to heat 10 square meters of space you need a power of 1 to 1.3 kilowatts. For example, if the area of the room to be heated is 80 square meters, then a gun of approximately 80-100 kilowatts should be selected for it.

Note! Also, the special table that we have given below should help you with your calculations.

Video - Choosing the right heat gun

Is it possible to make an electric heat gun with your own hands?

To create such homemade units can be used different elements and devices sold in all construction stores countries. So, you can use a pipe for the body (it is important that the material is not a conductor electric current), for example, asbestos. Or, as an option, you can even build a plywood box. Go ahead. As heating element a nichrome spiral can serve (the kind used in irons and other household appliances). To increase the heating capacity of the spiral, it can be folded in half.

Important information! This spiral must be connected to a thermostat - it will regulate the degree of heat.

In this case, the spiral should be located inside the box or pipe (approximately in the center of the structure), and the thermostat itself should be located outside. At the end of the housing there should be a fan heater, perhaps not very powerful. In principle, this is approximately how a low-power electric heat gun works.

Note! The coil and the fan must be connected to an AC power supply, and must be connected separately.

Step-by-step manufacturing instructions

As an example, let's take a look at one of the simplest designs. First you need to prepare:

fan channel type;
regulator (it must regulate the rotation of the fan rotor);
heating element (we recommend using RVES, whose power is 2.2 kilowatts);
thermostat;
plywood (its thickness should be 1.6 centimeters);
various types of fasteners.

So, when everything you need is already at hand, you can proceed directly to production. The procedure itself consists of several stages; we will consider the features of each of them in more detail.

Step one. First prepare the base of the unit. It is on this basis that all structural elements will be located. For this purpose, take a sheet of plywood, then cut out a rectangle with dimensions of 67x47 centimeters. Finally, carefully sand the cut piece.

Step two. Due to the fact that the heating element you are using, as well as the duct-type fan, is already a ready-made device in itself, simply connect them to each other using a mounting clamp. Place the resulting double device on the previously prepared plywood stand. To do this, use a plastic clamp designed for sewer pipes, and bracket. Attach the latter to the plywood sheet using self-tapping screws, and to it, accordingly, using self-tapping screws, attach the outlet pipe of the heating element itself.

Note! The back of the fan will rest on the stand.

Step three. Having installed and attached all the elements of the heat gun, you can begin assembling the electrical part of the unit. Take a heater with a fan and connect them (but, as mentioned earlier, only separately from each other). Therefore, for this reason, a thermostat must be connected to the PVES. In addition, you can also install a temperature sensor, which is necessary to control the temperature.

Step four. Connect a rotation regulator to the fan, thanks to which the intensity of air movement on the heating element will change, which, in turn, will help regulate the heat in the room.

Step five. To move the heater as conveniently as possible, you can attach four wheels to the bottom of the plywood sheet. That's it, the manufacturing process can be considered complete!

So, now you know everything about electric heat guns, you have become familiar with the technical characteristics, prices and popular models. That's all, good luck and warm winters!

Be sure to watch the feature video below.

Video - Making a heat gun at home

In climates where winter lasts almost six months, heaters of all types are popular. These types include an electric heat gun, designed for quick and intense heating of rooms. various sizes. Unlike passive heaters, which do not have rotational elements in their design, this type of device is capable of providing heating even for a summer residence, in conditions of cold, unheated rooms. To determine which model is the best, a rating of heat guns is offered, which presents ten products from different manufacturers.

Those who want to buy an inexpensive and fairly productive gun should pay attention to the model from the Tropic brand. The device has three-position power switching, corresponding to 5, 4.5 and 3000 W. The volume of air exchange is limited to an average of 400 cubic meters. m/h. Economical use will be ensured by standard energy consumption - 220 V, which is important with constantly rising electricity tariffs. Airflow provides active fan. The device weighs 4 kg and also has a handle for easy carrying. When the main elements overheat, the power automatically turns off. average cost TVT-5 is 3670 rub.

Mobility.
High heat dissipation.
Low power consumption.
Non-marking body.
Possibility of adjusting the heating intensity.

Enough high level noise when operating at high speeds.
Increased vibration at maximum load.
Heating of the device itself when long work.

Prices :

The rating of heat guns is presented by another domestic brand. At a price of 2670 rub. The device offers a pretty good set of basic characteristics. There are two speeds for switching the blowing power, the minimum level is 300 W, the maximum position is 1500 W.

The device is capable of operating from a regular 220 V home socket, which makes it interesting option for heating a medium-sized room (up to 25 m).

The large cooler provides a continuous and fairly fast flow of hot air. There is no possibility of additional fastening; the device only works in floor mode. The temperature is controlled mechanically.

Light weight of the device (only 3.2 kg).
Modest and discreet design.
Economical.
Good stability on flat surfaces.

Sensor missing automatic shutdown when overheated.
Low blowing speeds.
There is no timer.

Prices :

What price is a consumer willing to pay for the opportunity to save on electricity? Inforce brand engineers believe that it is not necessary to overpay for this. The model will cost a modest 2220 rubles. For this price it has quite a lot of advantages. With a standard amount of air consumed of 400 cubic meters per hour, the power of the device is 2 kW, which is not bad considering the volume of the room that it can heat. Available built-in thermostat, and thermostat, allowing operation in two modes (1000 and 2000 W). And the presence of a sensor that monitors the ambient temperature allows you to turn off the heating when the set value is reached.

The cross-section of the gun wires has been increased (the model does not overheat).
Safety to use (the heating element is equipped with a special grid).
Durability of the device.
Accessible and understandable controls.
Availability of a plug for a standard socket.

The gun is quite heavy, considering that models with similar characteristics have less weight.
Doesn't handle heating well large premises.
The color is bright, so the device may not fit into every interior.

Prices :

A budget device when considering its cost. With the characteristics, everything is going well: 220 V voltage, volume of blown air - 390 cubic m / h, frequency - 50 Hz.

The best heat guns have additional advantages that make them successful among consumers. This device has increased power – 3000 W. There are two blowing intensity speeds here, half the power of the device and max. There are other engineering solutions that improve the heating area (large fan blades, tubular heating element). The price tag for QE-3000 ETN 649-257 is within 2990 rubles.

Heating element made of stainless steel.
Availability of ventilation mode without heating.
Comfortable feet for fixing the device.
Reliable protection of the nozzle from unexpected contact.
Possibility to adjust the position of the gun horizontally.
Large blade cooler.

Noise level emitted during operation.
Weak air flow.
The hum from the operation of the fan blades.

Prices :

This brand has firmly established itself in the heater market. Its products are known primarily for their reliability. The heat gun model under consideration is one from the most budget on the market, the cost is only 1655 rubles. Power – 2 kW, there are two operating modes. The device is powered from a 220 V outlet. Among the pleasant features, I would like to note the weight of the gun, only 1.55 kg, which makes it convenient for transportation, both around the house and to the country. Small dimensions make it mobile. The two-bladed fan is made of steel, which increases heat transfer during operation.

A heat gun from Hyundai confidently heats a room up to 20 m, but it is not recommended to use it as the main heating method.

Affordable price.
The fan is made of stainless steel.
Low noise level (51 dB).
Strong fixation due to thoughtful design.
Compactness.

Sometimes it stalls during intermittent operation.
Poor heating of medium and large rooms.
Heating panel rattling.

Prices :

The proposed model from the German manufacturer is quite heavy - 8 kg, but this is more than compensated by its performance: in an hour it passes 400 cubic meters air, powered from a 220 V household outlet.

The declared power is as much as 4 kW, which is an undeniable advantage compared to similar models.

Thermostat and switch-off delay function help to optimize energy consumption. The gun body is made of metal, which increases structural strength and heat transfer during operation. The cost of the model is 3056 rubles, considering the power, it is a very interesting offer on the market.

The ability to not only heat, but also dry different rooms.
Stainless steel heating element.
Stepwise airflow adjustment.
Almost silent operation in heating mode.
The presence of a thermostat.

Lack of power plug included in delivery.
Inconvenience during transportation (due to size).
A light weight.

Prices :

This electric heat gun also does not go beyond the budget segment; its cost from retailers is approximately 2999 rubles. A feature of the model under consideration is record power in the segment, equal to 4.5 thousand W. There are few price competitors on the market that can deliver the same amount of heat for the specified price tag. Unfortunately, you have to pay for such power with considerable dimensions: 8 kg. The remaining characteristics are standard: power - 220 V, room heating - up to 35 m, network cable absent. The brand "SPETS" belongs to Russian company, the production of goods is carried out in our country.

Very fast heating of rooms.
Possibility of drying floors and walls.
The service life has been increased (up to 40,000 hours).
Two heating elements covered with stainless steel.
Rounded body shape.
Does not heat up during operation.

Presence of foreign odor (especially during the first time of operation).
Vibration of the housing during prolonged operation and an insufficiently level surface.
The device is not very mobile.

Prices :

The top three is closed by a model from the famous brand “Ballu”. The consumer knows a lot positive characteristics, which are the hallmark of this brand. The cost of the designated unit is 3190 rubles, which is slightly higher than competitors in the class. For this amount, the manufacturer offers 4.5 kW of power, and at minimum speed the device operates with a power of 3000 W, which makes it convenient for use in large unheated rooms, for example, warehouses or garages. The electric gun is powered from a standard 220 V network. Among the pleasant innovations internal heat shield, allowing you to keep the body temperature in the comfort zone.

Convenient dimensions for carrying.
Well-thought-out handle for transportation.
Availability of a mechanical thermostat.
Reliable fan, protected from dust and moisture.
Special coating of fixing legs.

The device operates quite loudly at maximum speed.
Operation at high voltage (current 21 A).
Small nominal heating area.

Prices :

In search of an answer to which heat gun to buy, we came to the model that ranks second in the rating. One of the main advantages is, undoubtedly, the price: RUB 2,185.00. RUR 2,772.00 The frequency is fixed at 50 Hz, the volume of blown air is 160 cubic meters per hour. The device is not the lightest (3.5 kg), but it does not experience overloads, since it does not operate at high frequencies, the rated voltage is 9.1 A. In addition, the power plug is included in the delivery kit; by the way, the device operates from a regular 220 Into the sockets. Control Panel mechanical, the heating element is smooth. The device is equipped new system protection against power surges.

Very compact dimensions.
Two modes of use: half and max.
Discreet design that fits well into the interior of an industrial or warehouse space.
Convenient location of control buttons.
Excellent heat dissipation characteristics.

Inhomogeneous housing, which over time leads to the appearance of extraneous noise.
Short fork, you often have to use an additional carrier.
Plastic grid heating element.

Prices :

The top of the ranking is occupied by a device from the Denzel brand, and it was not at all by chance that it got here. Firstly, it should be noted the reliability of this gun, which has proven itself in absolutely different conditions operation. Its cost is 2530 rubles, which, considering the maximum power of 3000 W, is quite good. There is built-in overheat protection, which means increased safety. Mechanical control, the amount of air blown out is 250 cubic meters. m/h. Fixation is only horizontal, on the floor or other flat surfaces.

Bright and recognizable design.
Ease of use.
Increased device reliability.
Mobility when carrying.
The presence of a built-in thermostat allows accurate measurements.

No timer.
The device does not fit tightly enough to the surface, which is why it may rattle during operation.

Prices :

Conclusion

Considering the rating of electric guns, we can conclude that the proposal for this category goods is high. However, the demand, given the climate of many European countries, was and remains high. A heat gun can serve as the main source of heating; it is most often used in workshops and small industrial workshops, as well as in country houses and utility rooms.

The category of active heaters is optimal solution for those who want to heat large areas. Those who prefer to raise the temperature in a small room and value silence more may want to pay attention to devices with reduced noise levels, which were also reviewed. Don't forget that main task A heat gun provides quick and high-quality heating of a room, so you should choose the device carefully, weighing all the pros and cons.

Heat guns are used to quickly warm up unheated or poorly heated rooms during the cold season. Compared to other heating options - heat guns, this is the fastest, most inexpensive and effective method increase the room temperature.

Which heat gun is better

There are three types of heat guns, depending on the principle of air heating used: electric, gas and diesel. Electric guns are suitable for raising the temperature in residential areas, while gas and diesel guns are best used exclusively in non-residential and well-ventilated areas. Each heat gun has its own pros and cons, and you can evaluate them by looking at the rating of the best heat guns.

They operate on the same principle as conventional fans. The difference is in design, power and performance, guns handle heat much better.

Electric heat guns are ideal for heating residential premises because they do not emit harmful compounds and do not in any way affect the quality and cleanliness of indoor air. Spiral or ceramic plates are used as heating elements.

Gas

The efficiency of such guns is much higher than that of electric guns, so they can be used in large rooms. But it is important that in this room there is good ventilation and constant access to fresh air. Also, when working with gas, you should follow safety precautions, as it is explosive.

Diesel

A diesel engine is used for heating and liquid fuel. There are two types of diesel guns - with direct and indirect heating. In direct-heated guns, combustion products instantly enter the surrounding air, so they must be used in ventilated areas. In indirectly heated guns, combustion products only partially enter the air, so they can be used in rooms with moderate ventilation.

There are also infrared diesel heaters, which heat not the air, but the objects that are in the room.

The best electric heat guns

This is an electric heat gun with a ceramic heating element. It has two power levels - 1 and 2 kW, this is enough to increase the temperature in a room of 20 square meters. meters, at 43 degrees. The gun itself weighs only 3.5 kilograms, so it can be easily transported between rooms. The model is suitable for heating small living spaces because it is safe, compact and easy to use.

There are two power levels;
Compact and lightweight.

Cannot be used around the clock; after 22 hours of operation, a break is required to cool the heating element;
There is no temperature indicator, so if the gun overheats, it cannot turn off and cool down on its own.

Evgeniy, 54 years old. This gun is not suitable for professional use as it lacks power. I constantly use it more as a heater in rooms where the design of the heating device is not important, for example, a basement, a garage. For its price, fairly high-quality assembly and compact size and normal power. Overall happy with the purchase.

The electric heat gun, unlike the previous model, reaches a power of 5 kW, which allows you to heat the room more quickly, but at the same time, according to the manufacturer, it can only increase the temperature by 40 degrees.

This gun cannot be used around the clock either; after 24 hours of operation, it must be turned off and cooled for two to three hours. The productivity of this gun is 400 cubic meters warm air per hour, which is about three times more than the previous model. But the increase in power affects the size of the device itself; it weighs more than 6 kilograms and is not so compact.

High productivity and power of work;
Possibility to use it continuously 24 hours.

Size and weight, this gun is difficult to carry between rooms;
There is no temperature sensor, so it is necessary to constantly monitor the temperature of the gun so that it does not overheat.

Anna, 35 years old. We bought a gun for the house to quickly heat the rooms. We tried it, as a result, from a temperature of -2 to 27 degrees, a room of 16 square meters. meters warmed up in an hour, then tried it in the kitchen, 10 sq. meters in about 40 minutes. At the same time, I heated at a power of 5 kW. After the test drive, I thought about buying a second one of the same kind in order to heat the rooms faster, an irreplaceable thing, especially if there is no wood heating in the dacha!

This heat gun is similar in its characteristics to the first option, but it has a significant advantage - it is compact, the model weighs only 1.7 kilograms. Otherwise, its power reaches the level of 2 kW, and the warm air output is 130 cubic meters per hour. It is not recommended to use it in large rooms, as it will take several hours to heat them up.

The presence of a drip thermostat; when the heat is high, the gun should automatically turn off for cooling;
Possibility of use in residential premises;
Compact and lightweight, the heat gun weighs less than two kilograms and even a child can carry it.

Low power and performance, it takes more than a few hours to heat large rooms;
The gun cannot be used continuously for longer than 20-22 hours.

Oleg, 43 years old. The manufacturer claims that there is a capillary thermostat, but I did not find it. At the same time, the gun has a thermostat at the same level as in a regular iron, which operates not to heat the air, but to heat the body. Another significant drawback is that the mode switches are not configured for current; the supplied wires are simply inserted and pressed with spring-loaded plates. Also, when the thermostat is triggered, the fan turns off simultaneously with the heating element. But if you improve it, then for your money it’s a pretty good device.

According to their own technical specifications The model compares favorably with previous versions. Its peculiarity is that when heated it does not dehydrate the air, so it can be used in an apartment without any additional problems.

Besides this, despite low power- 2 kW, it is distinguished by a fairly high productivity of warm air - 190 cubic meters per hour. This is enough to warm up in an hour. small room to a comfortable temperature. It can also be used both for a summer house and for a garage, because it is compact and easy to carry.

There is an air humidity control system, that is, when using this heat gun, the air in the room will remain with normal humidity;
There is thermal control, that is, the gun will automatically turn off if it overheats, this will help avoid fires and short circuit;
Lightweight and compact - this gun is easy to carry between rooms.

Loud fan, which is very audible during operation.

Artem, 32 years old. I bought it to heat the locker room at the site, this basement with bare concrete, an area of about 12 square meters. meters. Heated it to a comfortable temperature using a gun in about two hours, and the room became very warm; wet clothes and shoes on hangers even had time to dry overnight. It's been a month since I bought it and I'm using it. all day long, without turning it off, has not failed yet, but there are several shortcomings. When operating at 1 kW, cold air blows from below. The fan is also very loud, you can really hear the rumble at night. Thermostat is not sensitive.

Unlike the previous ones, this is a gas heat gun. Therefore, by using a different principle for heating, it is more efficient. Her maximum power— 10 kW. and the warm air productivity is 300 cubic meters per hour.

This gun is equipped with a heat sensor and overheat protection, that is, if the permissible temperature level is exceeded, this device automatically turns off. This avoids dangerous situations. Its disadvantage is that there is no fuel level indication, so it is impossible to determine how long the fuel will last and when to change the cylinder. But fuel consumption can be approximately calculated from the manufacturer’s data; he states that no more than 0.86 kilograms of gas are consumed per hour.

Since this gun is gas heating, it should not be used in residential areas, it is only suitable for a garage that has good ventilation, as well as for technical work.

This unit is intended not only for heating residential premises, but can also serve as a drying element, which gives it even more positive aspects. The heat gun is especially popular among buyers whose homes do not have a heating system. The most reliable device for heating a house or garage will certainly be a heat gun, and its choice, application, types and advantages will be discussed further.

Types of heater guns

A heat gun is a device that has many functions. It can serve as a heater, be used for technological drying purposes, and most importantly, the presence of centralized system heating, as it is connected directly to the electrical network.

The heat gun has the ability to quickly heat any type of room, be it a garage or a large unheated room in an apartment. The device will be able to quickly heat and also maintain the desired temperature in the room. A detailed study of its existing types will help you choose a gun heater.

Types of gun heaters:

Infrared heat guns heat a room by burning fuel and turning it into infrared radiation, which spreads throughout the entire area, creating the necessary heat.
Electric heat gun - in an electric heat gun, heating is provided by a fan installed inside, equipped with a heating element, which begins the process when connected to the electrical network.
Air heat gun - the basis of the work is not just blowing air, but shooting it out, due to which a room of any type and size is quickly heated.
Oil heat guns.

Latest most economical types heat guns, certainly oil-based, since their operating principle is that recycled oil burns and produces heat. The peculiarity of an infrared heat gun is that it heats mainly objects, not space, which is why it is in great demand when performing repair work.

A gas heat gun is the most durable type of these devices, as it can easily withstand transportation and any temperature changes.

The operating principle is based on the combustion of liquefied propane gas in a combustion bowl. A water heat gun has the ability to heat enormously large types of premises. It takes in cold air, processes it through a water filter and releases heat outside.

Usually convectors, warm baseboards, heaters, heated floors and other heating elements are used to heat rooms, but few people know about this reliable device like a heat gun. Reviews of heat guns can often raise controversial questions and opinions about its use, application and types.

It is necessary to select such a device depending on the type of application.

Choosing a heat gun was very difficult. The car was constantly freezing in the garage, but thanks to a propane heat gun, we managed to deal with it, and quickly, because this device has a crazy air flow.

Functions that any heat gun performs:

Quickly warms up unheated rooms (garages with a large area including the car located in it).
In large workshops, an infrared heat gun can heat not only air, but also objects.
Defrosts any car at any time sub-zero temperature very quickly, thanks to its powerful flow of heated air.
Widely used for construction work ah, namely during the installation process suspended ceilings, at painting and plastering works etc.

It is also suitable for home use because it does not make noise - it is a reliable heater. The rating of heat guns varies depending on price, type and application. Before purchasing this device, it is best to know what functions it can perform and for how long.

Description of infrared heat guns

Infrared heat guns play a special role among all types of their competitors and stand out due to the fact that the heat they emit heats the surface at which the heat gun is directed not with a hot stream of air, but with infrared waves.

The objects that such an electric gun heats transfer heat to the entire living space during the heating process; this heating option is ideal for a summer residence.

The heating capacity of such a device has only one drawback: the low rate of warm air flow, but it is better, since it is located near it and a person can feel comfortable with pleasure.

Advantages of infrared heat gun:

It evenly heats objects in the room, and as a result the air, which contributes to the low flammability of residential premises.
Does not dry out the air, thereby improving human comfort.
The heating elements and internal components of the infrared heat gun are the same as those of the converter heating system.

The element of the infrared heat gun, which is responsible for the radiation of heat, takes energy from the combustion process of liquefied gas inside a special chamber, as a result of which it prevents combustion products from entering living spaces, which is very environmentally friendly. Many people are faced with the question of which gun is better to buy? Choosing such an electrical device is not an easy task, since its selection often takes a lot of time.

Characteristics of electric heat guns

The heating system has long lost its prestige with the appearance of various heating elements on the construction market. They are often more reliable, cheaper and there is less hassle with them. Heat guns are very convenient as they are easy to move, transport and install.

There are many types of fluff that will help you choose the right device:

Diesel;
Electrical;
Water;
Gas;
Infrared and airborne.

There is something for every taste, depending on the wishes of the owner. The diesel power of any type of heat gun is 220V, which is also the maximum electrical power. Calculation of the cost and functionality of a heat gun showed that it is more economical than any type of heating.

Positive and negative qualities electric heat guns are different. The electric heat gun does not have the ability to open process combustion of fuel, which will protect human life in case of fire and protects against gas poisoning.

An electric heat gun does not emit any negative odors during operation.

Can be used even in small rooms that need heating. It has small dimensions. The electric heat gun is equipped with a temperature regulator, which will create comfort. When choosing an electric heat gun, you will not have to worry about refilling it with elements, since it is not needed due to the fact that the device operates directly from the network and is powered by electricity.

Application of an air gun-heater

In the autumn-winter period, when it is not yet turned on heating system, users always have the opportunity to purchase and connect an air gun-heater. The heating capacity of a thermal gun is very high and varied, depending on the type and parameters of the device.

The range of its use is also wide; it can serve:

For heating greenhouses;
Even as an electric heater.

It is almost impossible to calculate how long it will take for an air gun to heat a room due to the difference in temperature, voltage and conditions. A test of almost every heat gun will show that it is a powerful air and object heating device. For offices and residential premises, a heat gun for heating may only be needed as an additional source of heat, since in general such premises already have a centralized heating system. During any renovation it is often necessary to have an additional heat source in the room in order for everything to painting work dried out faster.

Auto repair shops often install heat guns on oil based, since they do not emit into the air harmful substances and do not pollute the oxygen in the room.

Thanks to the powerful flow of warm air, heat guns can quickly heat large rooms, which significantly saves money on purchasing other heating devices. To the extent that winter time the temperature drops, the plants in the greenhouse need warmth. To heat outdoor buildings such as gazebos, infrared heat guns are used, which heat the structure itself.

As a main or auxiliary heater for a garage, private home, cottage or industrial premises. But how to choose the right heating device, and what characteristics should you pay attention to, given the rich assortment presented on the modern domestic market?

To decide which electric gun is better, you initially need to make a choice between several parameters:

It should be mentioned that depending on how much electric heat costs

Its quality, durability and reliability, the type of heating element and the presence of automation depend, because it is a well-known fact that good technique can't be too cheap.

To help our compatriots when choosing a product that is of sufficient quality and not the best, our company’s specialists have compiled a rating of the main models presented on the domestic market.

Manufacturer Ballu with model BKx 3

The ballu bkx 3 heat gun is essentially a fan heater installed in a fairly compact metal case with polymer coating. The main purpose of the device is to heat residential, public and household premises. To heat the air flow supplied by the axial fan, the device is equipped with a highly efficient ceramic heater.

The device is powered from a single-phase household power supply. With a relatively small size, ballu bkx 3 has a good productivity of 120 m 3 / h. With a power of 2 kW, this fan heater is capable of heating a room with a not very large area of 25 m2 up to 50C °.
The device is equipped automatic protection from overheating, manual step power regulator operating in three modes: half power, full power, without heating in fan mode. The ballu bkx 3 heat gun is reliable and does not require periodic maintenance.
A plastic handle is installed on the body for transporting the fan heater. Device weight 1.7 kg.
The cost of this device in different stores across the country varies from 40 to 55 USD.

Resanta TEP-3000K if you need mobility

The portable heat gun Resanta TEP-3000K is designed for rapid heating of air in residential and technical premises. This device consists of a supporting housing, a protective grille, a fan located in the rear part of the housing, and tubular heating elements made of stainless metal. Depending on the version, the control unit of this device is mounted in the upper part of the housing or on its side panel.

The total power of this heating device is 3 kW, and the productivity is 300 m 3 / h, which is enough to heat rooms up to 30 m 2.
The device is powered from a single-phase network 200V 50Hz. With help three-position regulator, you can set the desired heating temperature of the heating elements, which is: 1 position– without heating, in position 2 – 1500W, in position 3 position- at full capacity. In addition, an additional regulator allows you to smoothly set the desired heating temperature of the air flow.
The Resanta TEP-3000K heat gun is equipped with built-in thermal protection and automatically turns off the device when it overheats. On the body of the device there is a convenient handle for carrying this device.
The mass of the heat gun is 5.1 kg.
The cost of this device is retail stores Russia varies from 70 to 90 USD.

Silent gun Neoclima kh 2

The neoclima kx 2 heat gun allows you to create a local flow of heated air in small domestic and residential premises, as well as in places where repair and construction work is carried out. This one is equipped with a highly efficient ceramic heater PTC and a system that prevents a decrease in air humidity levels PlusO2.

The device is powered from a single-phase household power supply, voltage 220V. The power of the device is 2 kW, which is enough to heat the air in a room whose area is no more than 20 m2. The productivity of the device, declared by the manufacturer, is 190 m 3 / h. Also, this portable climate control equipment is equipped with a thermostat that maintains the set temperature in the heated room. In addition, this device is equipped with a mechanical three-mode power regulator: 1 – 1 kW, 2 – operation at full power, 3 without heating in fan mode.
The specially developed design of the axial fan allows it to operate without making any noise, which is a definite advantage of this device. The installed thermal protection will automatically turn off the power to this heater if it overheats.
What makes neoclima kh 2 reliable and fireproof is its compact metal anti-vandal body with a polymer composition applied to it.
There is a handle on the body for convenient transportation of this device, which weighs 2.36 kg.
The price of the device in some stores varies from 47.5 USD. e up to 65 USD e

Equation 3000 VT - safety comes first

Ceramic heat gun 3000 W Equation is an excellent example of a fan heater from the Middle Kingdom. A fairly inexpensive, powerful and high-quality device, not much different from similar models from other manufacturers. The only difference between it and other fan heaters is that it is equipped with a high-quality 3 kW ceramic heater. This power is enough to heat a home, office or garage with an area of up to 25 m2.

This unit is equipped with a mechanical switch operating modes, which it has three: 1 – fan; 2 – heating with a power of 1.5 kW; 3 – work at full power.
In addition, this heat gun is equipped with sensor against possible overheating,which will automatically turn off the power supply to the device from the 220V household power supply. The equitation 3000 also has a safety sensor that, when the device is turned over, will stop supplying power to the heating element. Such features only add to the advantages of this fan heater.
The equation 3000 ceramic heat gun is made in metal case cylindrical in shape, with a fairly stable stand.
The small dimensions and weight of the device (2.9 kg) make it possible to easily transport the device.
The price of equation 3000 is on average about 2 – 2.5 thousand rubles.

Fubag SIROCCO 20 M: made in Germany!

The fubag SIROCCO 20 M electric heat gun is a new fan heater model from a well-known German manufacturer, presented on the domestic air conditioning equipment market. This representative of climate control equipment operates from a household power supply with a voltage of 220 V. Thanks to the cylindrical shape of the body, this device has significantly increased productivity, which is 279 m 3 / h. The total power of the device is 2 kW.

The fubag SIROCCO 20 M gun has a stepped three-position power level switch, air flow heating: 1 – fan; 2 – 1 kW; 2 – total power 2 kW. A tubular heating element is installed as a heating element in this device, which is protected by a metal grid from foreign objects entering it.
An important feature of this fan heater model is the presence of a built-in thermostat, the ability to change the angle of air flow, and the stable stand ensures maximum reliability of the device installation. In addition, this device has an overheat protection function.
The fubag SIROCCO 20 M heat gun is a reliable device that can quickly heat residential, technical and industrial premises, area up to 20 m2.
A comfortable handle and a fairly light weight of 4.2 kg of the device allow you to transport it freely.
The cost of fubag SIROCCO 20 M in some Russian stores is 3,650 rubles. – 4,200 rub.

And finally

The heat guns presented in the review differ little from each other in terms of technical characteristics. All of them are of high quality and have a standard set of functions. But the most modern and reliable, in a word, the best heat guns are equipped with a ceramic heating element.