Paint tinting: what is it and how to get the desired shade. Do-it-yourself paint tinting

Despite the ever-expanding range of roll and modular materials intended for interior decoration, paint is not only not inferior, but is also confidently expanding its position. Of course, the price of this material is of considerable importance, but it also gives no less possibilities for design - if not more.

To work with paint coatings, the main thing is to learn how to select and combine shades. But you will learn how to tint paint correctly by reading this article.

Principle of tinting

Interior and facade paints and plasters, enamels for metal and varnishes for wood - all this can be tinted, since most of these materials go on sale in white.

Stores selling paint and varnish materials, of course, offer tinting services:

They carry it out according to the catalog of one or another manufacturer - but this is not always convenient for the customer, especially if it is intended to produce, as in the photo below, multi-color dyeing, or to match the tone to the textiles. And then, this service is most often paid. Therefore, everyone who prefers to do the work with their own hands is looking for necessary information in the Internet.

There is one more important nuance, because of which it is better to tint the paint not in the store, but in the room being finished. In different lighting conditions, color is perceived completely differently, and it may turn out that you are happy with everything in the store, but at home you are absolutely not happy with it.

We'll tell you how to tint paint with your own hands at home.

What nuances need to be taken into account

Before you tint the paint, you need to correctly decide on the shade that you need. Keep in mind that the same color will look different in natural light, bright electric light, or dim lighting. Therefore, you should first make a sample, apply it to a piece of drywall, and evaluate it under lighting of different intensities.

So:

It is advisable to use lamps that will be permanently located in the room, since not only the power of the lamps matters here, but even the color of the lampshades. And you also need to remember that the larger the area being painted, the richer the tone will appear.

If we take into account that the light is distributed unevenly in the room, it is clear that in shaded areas the painted surface will appear darker. Therefore, if you want to do in the interior bright accent, try to choose the wall on which the light falls more favorably.
Kohler is the same paint, only highly saturated, and can be used in its pure form to create accents like those in the picture above. Although, there are also tinting pastes that are used exclusively to obtain the desired shade of paints and plasters.
In order for the mixing to be uniform, the color must match the composition of the base paint. In general, when it comes to plasters, paintwork materials and primers, it is always better to combine materials from the same manufacturer. Practice shows that in this case their adhesion is ensured most fully.

But as for the color, if you haven’t found desired color, you can take an option from a different brand - the main thing is that it is designed for tinting the type of paint that you are going to use.

Differences in color composition

Tinting paints and pastes differ primarily in consistency. The paints are more liquid and allow you to get soft pastel shades. The pastes are quite thick and make it possible to create a composition that is much more saturated in color.

When choosing them, you also need to take into account the operating conditions of the coating and the type of paint that needs to be tinted.

To ensure coverage of the coating, color is given not only to paints, but also to primers and impregnations - they are used for individual species colors For water-dispersion paints, completely different types of pigments are intended, for alkyd and oil paints- Same.

Before tinting acrylic paint, which is most often used for interior work, you need to make sure that the color is intended specifically for it. According to the mixing method, the colors may also differ. With tinting paints it is somewhat simpler: select a tone, find its recipe and mix it.
Although pastes are universal in use, they require more precise dosage, so working with them on your own is much more difficult. Again, each type of paint has its own color content standards, and they cannot be exceeded. For paints on water based this 20% is the highest percentage. For other types of paint, 7% is the maximum.
Water-soluble tinting compounds mixed with a white base, saturated color will not be able to provide. In general, they are produced on the basis of pigments of organic or inorganic origin. The first option is characterized by high saturation, and in cases where it is necessary to provide a bright color, they are chosen.

Colors based on organic pigments have one drawback - they are not very stable, and under the influence of ultraviolet radiation the coatings fade. The saturation of inorganic pigments is much lower, but they never change their color.

Mixing paint

So, you need to make a sample first. To do this, you need to have a small container on hand. These could be jars baby food, yogurt containers, or plastic measuring cups - the main thing is that they are clean.

So:

Medical pipettes can be used as a dispenser, but syringes are better, as they have divisions. By the way, tinting pastes are often sold in syringes. It is also convenient to use the colorant, packaged in soft tubes with a narrow spout. Also prepare a sheet of paper and a pen to write down the ratios of paint and color.

To work you will also need several brushes. different sizes, rollers, paint and primer tray, masking tape, clean napkins. When using water-based paints, brushes can be washed under running water. In other cases, you need to take care of the solvent.

If your container does not have measuring marks, apply them yourself, accurately determining the volume of liquid up to the line. Then, pour paint into a jar and add color there, starting with a few drops. Stir, see if the shade is too pale, add one drop at a time, not forgetting to count and write down their quantity.

So as not to make a mistake

Once you get a tone that visually suits you, you need to evaluate it on a test board. It is better if it is not a wall or ceiling; use plasterboard if the base surface is plastered, or plywood if it is to be painted wood paneling. Cut the sheets into squares with a side of 40 cm, and test the resulting shades first with strokes.

If you realize that there is not enough color, add no more than one drop at a time. When, in your opinion, the required tone intensity has been achieved, color the test sheet completely. Even if it seems to you that now you have what you need, do not rush to tint the entire volume of paint and begin the main work.
Since it is impossible to appreciate a raw coating, leave the sample for several hours until the paint has completely dried, and see what you get, first in daylight and then in electric light. Perhaps you will realize that the color turned out brighter than it initially seemed, and you will come to the decision to reduce its saturation.

When you tint the full volume of paint, reduce the calculated amount of tint by twenty percent. Only when the first layer of coating is applied to the walls will it become clear how correctly you have approached the desired shade. If necessary, a small amount of color can be added to the paint before applying the second coat.

It would be useful to remind you that the base surface must be well prepared before painting: leveled, puttied (see), sanded and impregnated with a primer composition. Even the most luxurious shade is not able to hide surface defects, and a careless attitude to preparation technology can generally lead to a sad outcome.

The main methods of wall finishing are laying ceramic tiles, wallpapering and color painting. Each of them has its own advantages and disadvantages, certain specifics, application and installation technology. You are free to choose whatever you want, as the range is quite wide. Here we will talk separately about the color for wall paint, its capabilities and diversity.

Kohler is a paint that has a very rich or contrasting color. It is used to give the desired shade (otherwise, to tint) oil, latex, alkyd, water-dispersion and other paints. Kohler can go like finished coating or coloring additive for individual surface areas.

Just remember that the areas should be small. The color is best applied to concrete, putty, plastered and brick surfaces. Kohler is simply a godsend when it comes to finishing facades and interiors.

Home tinting is indispensable for people with a rich imagination who need a “complex” shade that cannot be purchased in a store or done using a tinting machine.

The “complex” class includes colors that are a mixture of different tones, as well as tinted colors. For example, maize yellow is an easy color because you can buy it in any store or market. But the color of currant juice is a completely different matter, because there is a mixture of purple and red colors. In this regard, it is impossible to buy such paint, so the only way out is to tint it yourself right at home!

There are two types of colors:

Colorants are rich tinting pastes.
Paints are concentrated, intense solutions.

Advantages of color

The advantages of tinting for home renovation are quite significant, you should definitely pay attention to them:

I will say that modern paints are not inferior in quality to other finishing materials.

Important! When applying paint to any surface, you must follow the technology very carefully, otherwise the result may disappoint you.

Application

The first stage is preparing the walls. One way or another, when applying paint to a wall, all its defects are instantly visible: unevenness, cracks, etc. To avoid this appearance, putty should be used.

Then comes the mixing of the paint, which is discussed in detail below. After this, the paint is applied to the surface with a roller. Let's look at it in a little more detail.

To apply color to the wall, you need to prepare a roller with a fur coat (pile 15-18mm). Due to the fact that some particles will settle to the bottom of the container, do not forget to stir the composition after a certain interval. This will give it uniformity and when applied to the wall, the difference between areas will not be noticeable.

Here we can add that roller rollback plays an important role. This is due to the fact that the thick layer of paint that has accumulated on the roller does not allow it to be evenly distributed over the wall.

So that the use of color gives good result, you should not forget a few more simple rules:

exclude drafts and direct sunlight;
make a sample;
use gloves when working;
start painting from the wall that is not in plain sight.

The mixture of paint and color must be applied overlapping - vertical stripes must overlap each other. If paint is applied to wallpaper that is pasted for painting, please note Special attention so that the seams of the wallpaper and the joints of the paint strips do not coincide.

Don't miss the moment the paint dries yet. It is indicated on the packaging, but usually does not exceed five hours. Thus, if you paint in two layers, then finishing the room should take one day.

Nowadays, color comes in both powder and liquid. I can’t say that any of them has more advantages, so you can safely select the one you like best.

Mixing technique

First you need to determine: how much paint will you need? When mixing by hand, there is always a human factor, and ninety-nine percent out of a hundred, the second time you mix, you will get a different color than the first time. In order to avoid such troubles, be sure to carry out calculations by determining the proportions of the paint. It will be better if there is something left over rather than trying to guess the initial shade again.

Before applying color to the wall, you need to prepare it. It is important to follow the rules here so as not to make mistakes.

To begin with, you can make a sample that will help you determine the desired color and prevent you from spoiling the entire volume. This is done like this: mix 100 ml of paint in a small container, then add a few drops of pigment. You can add it with a syringe; this method will allow you to determine the number of drops and see when the mixture acquires the desired color. When you reach it, write down the number of drops somewhere so as not to keep it in your head.

The next step is to see how the color will look on the wall. It is worth considering that on the surface it may be slightly different than in the container. To check, select small plot walls and paint with the resulting mixture. Wait until everything is completely dry. Look at it in different lighting, taking as a basis the one that usually prevails in the apartment. If the color is suitable, you can continue working.

By the way, this is one of the advantages of hand-painting. You can prepare a small amount of paint and save a lot of money.

To obtain a significant volume, take a plastic or enamel bucket. Water-based paint is poured into it and mixed by hand or with a construction mixer. Add a little water to get a milky consistency. Next, make a color solution. This is where calculations come in handy again.

If, according to the notes for the sample, you used 10 drops of one color and 6 of another per 100 ml, then to paint the entire wall you need to reduce the base by 20%. For 1000 ml you should take not 100 and 60 drops, respectively, but 80 and 48.

The resulting color solution is added in small portions to the paint bucket. Applying it to the wall is exactly the same as applying the sample. IN in this case haste is inappropriate. The time spent will definitely pay off with a result that is pleasing to the eye.

Paint tinting involves mixing, diluting paint and varnish material in order to obtain the color tone planned according to the design project. To obtain the desired shade, you can use the services of companies specializing in the sale of paints, or perform all the procedures yourself.

Experts identify several cases in which it is necessary to paint the surface:

selection of shade according to color scheme interior;
there are minor defects in the original layer;
errors in calculating the volume of paint and the absence of a previously used color;
interior design using several shades of one or more colors.

To summarize, we can say that tinting allows you to limit cosmetic repairs, and not to carry out complex and voluminous painting work.

Tinting systems

To choose the right tone and, accordingly, achieve a perfectly even color, it is recommended to use tinting mixtures. They are a mixture of base paint (usually white) and a coloring composition - tint. The latter are characterized by a contrasting, often saturated tone compared to that used in the base.

Colorant pigments are divided into two types based on origin:

organic;
inorganic.

Pigments of the first type are a range of bright tones. It should be remembered that paint and varnish materials obtained from them begin to lose brightness and saturation over time under the influence of direct sun rays. Therefore, pigments of organic origin are not the best choice For facade paint.

Inorganic pigments are more resistant to aggressive external factors, including fading. However, this paint color has an extremely narrow range of shades.

Colorants are produced in three states:

dye;
paste;
dry composition.

Pastes contain dispersing resins and may not contain a binder.

In terms of their range of applications, pastes are universal - they can be combined with any type of paint and varnish materials ( alkyd enamels, water-based compositions and others), as well as highly specialized ones.

The advantage of pastes is their ease of use, as well as the ability to make adjustments to the shade as they mix. However, the disadvantage is the high probability that the color intensity of the tinting paste will be uneven.

The composition of tinting paint contains the same components as in paint and varnish material. This should be taken into account when selecting. For example, if you plan to use water-based paint, then you should choose a color that is identical in composition. Combining white paint And this kind of pigments, you can get any colors. Best combination can be found in a special tinting table. You can change the tone saturation towards brightness by using the colorant in undiluted, pure form.

Dry or loose pigments are inexpensive. But against this background, they have several disadvantages:

limited choice of colors;
the shade is difficult to adjust due to the undesirability of adding it to the finished paint.

Manual and computer mixing

You can tint the paint using two methods:

computer;
manual.

Tinting at home requires the prior purchase of a base paint, as well as a colorant kit. The pigment is added immediately before coloring begins. Proportions are selected according to the requirements of the instructions. Do-it-yourself paint tinting has whole line advantages:

the opportunity to save a significant amount of money;
the procedure can be carried out directly at the repair site;
the ability to create exclusive colors that have no industrial analogues.

At the same time, the process carried out at home has one drawback: it is almost impossible to reproduce the resulting tone again.

Computer tinting is controlled by a special program. The operator selects the color according to the requirements, and the program itself determines the proportions and then produces the finished mixture.

Computer tinting has the following obvious advantages:

the procedure takes much less time;
the desired colors are easy to reproduce again (you just need to save the tone in the program memory);
wide palette of colors.

The equipment used for mixing can be found in construction stores.

In general, the list of equipment that is used for is as follows:

A large stand with booklets containing a table of tones, grouped, as a rule, by interior groups.
Fan of flowers. In fact, this is the same table that is presented in the stand booklets, only in a separate casing. It is advisable to use such equipment to carry out color selection directly on site.
Computer color machine - used to select paint according to a given sample.
Pigment dispenser. This equipment manual application. It is a drum with canisters made of of stainless steel. Pigment mixing is ensured by a motor.

It should be remembered that tinting paint using a machine method is not feasible directly on site. In addition, color selection is greatly limited to those suggested by the table. It will not be possible to obtain any complex shade, no matter how modern and sophisticated equipment is used.

How to paint walls with color

Today, there are many methods for finishing wall surfaces. Interior paint coating with added pigment is gaining more and more fans. It should be remembered that this process will reveal all the flaws and unevenness of the wall surface. Careful preparation, which includes applying putty and primer, helps to avoid this.

The application of any paint material should only begin after the primer has completely dried. The primer should be selected to suit the chemical composition to the base paint.

Painting walls with color begins with preparing the main components - paint and pigment. You will also need a bucket coated with a layer of enamel or made of plastic. Water-based paint is poured into the container and stirred with a construction mixer until it reaches the consistency of milk. Separately, 100 g of water-based paint and varnish material is mixed with the color and gradually, in small portions, introduced into the base paint.

When mixed, the surface of the coloring solution may become foamy. You should let it settle before you start painting. In this case, the layer will lie correctly and neatly.

We take care of the façade

If earlier external walls houses were painted in one color, which was offered construction stores, then today the owners are trying to add variety. Therefore, facade paint with the addition of color is becoming very popular.

Color is nothing more than enamels with a rich, bright tone. Used for a wide range of paints: alkyd, water-based dispersion. Very often, colors are used in pure, undiluted form. This, for example, allows you to highlight individual elements of the facade. A special fan table allows you to harmoniously select tones.

When selecting a color palette for facade paint, two scales are used - they can be found in the tables offered by color manufacturing companies.

This, and NCS with 1950 colors. The colors are mixed with nitro enamels, water-based enamels, and other paints and varnishes.

As a rule, facades have a large area, so it is better to select a painting solution not by hand, but by machine. The desired tones can be selected using the table. It is very difficult to manually prepare the same tone in large quantities.

Painted facades give the house an attractive appearance and protect it from negative environmental factors. Adding colors to paint increases the brightness of water-based materials.

Tinting paints – The best way implement design ideas. The resulting solutions are used for internal and external works. Pigments are added even to. The color and paint must be from the same manufacturer - this is a guarantee of high quality coloring.

If you want to create a space with colors that perfectly match the decor, you need to buy colors. This is a concentrated pigment, a source of color. It can be added to paint, plaster or putty. The result will exceed expectations, the color will be as rich and deep, multidimensional as possible.

Main types of colors

All colors can be divided into two large groups: with organic and inorganic pigments. Which color is better to choose? Of course, you always want to use environmentally friendly clean materials when creating a design indoors, therefore colors with organic pigments immediately evoke great sympathy.

However, there is a catch - colors created with their help fade faster and fade under the influence of sunlight. We need to pay attention to this.

If unnatural substances are used as a pigment, this does not mean that they are dangerous. Is it possible to get poisoned by eating a piece of wall painted with paint based on unnatural substances? Perhaps the chances are greater than in the case when the wall is painted with paint with the addition of a color made on the basis natural ingredients. Sometimes it's important, sometimes it's not.

A photo of paint colors and a palette will help you make the final decision. If the base is natural, more saturated and bright colors can be created by adding it in smaller quantities.

Kohler is a small jar, there is relatively little of it in it. The color palette for synthetic-based paints is a little more modest. Tinting may turn out to be too expensive at first glance. Is it really? Repairs will not need to be done after three years, for example, if you choose them. Of course that's a plus. The design will surprise, delight, delight, and give pleasant emotions for the prescribed five years, no matter what.

Different consistency

How to dilute paint colors? It all depends on its consistency. There are colors in powder, paste and liquid form. They may be intended for acrylic paint exclusively, for oil, water-based or suitable for different types simultaneously. You also need to pay attention to this, study the label, figure out which variety you like.

Colors in the form of a paste can be dissolved in paint faster than powdered ones. Liquids should be handled carefully as it is easy to add more or less than you should.

Powdered ones need to be mixed well - more thoroughly than others. All colors are diluted first in a small amount of paint, then added to the main volume. The paint is mixed and a preliminary test is made. It is advisable to test the color on a material similar to that which is being dyed so that its absorption capacity is taken into account.

Sometimes it is suggested to mix colors and paints using a computer, a special program, right at the point of sale. This is convenient because you can accurately select the shade - the computer determines how much color is needed. But you need to know in advance how much paint will be needed to complete the entire amount of work, so as not to confuse anything later.

Paint base and color features

Color for acrylic paint is added to acrylic paint and only to it. This is important to remember. If the manufacturer indicates that the dye is universal, then it can be added to another type of paint. It is advisable to use paint and colors from the same company - they completely match each other. This simplifies the color creation process.

The color for facade paint is characterized by greater resistance of the pigment to factors environment. It should be added to the façade paint accordingly. Can it be used for interior finishing work?

If it contains harmful substances, even added to non-toxic facade paint, will have Negative influence on health, and therefore the degree of toxicity must be indicated on its packaging.

Color for water-based paint ideally soluble in water. It cannot be added to oil. This is useless, the result is unpredictable - stripes, spots may remain, the aesthetics will be lost, it will not simply blend with it.

A universal color scheme, even if not all of it is used up, will come in handy around the house, probably in the country house or for decorating another room. Therefore, sometimes they try to acquire it. On the other hand, it may turn out to be superfluous, you will want to choose a different color, you will like spending money, the result will make a good impression, it will become clear: these expenses are rational.

Photo of paint colors

When a person plans to renovate, he wants his apartment or house to look special. This can be achieved different ways, in particular using paint colors. The use of coloring pigments is also justified when you need to choose a color to match certain interior, for perfect harmony of shades or if you can’t find the required color in stores.

It also happens that there is not enough colored paint to paint the entire surface, but the store has run out of the required color. This is where color comes in handy. But what is paint tinting, what pigments are there, how to do it yourself and many other issues need to be considered in more detail.

What is tinting

Tinting of dyes is a unique process of combining two main components to achieve the desired shade. Color selection is carried out in two ways - independently or through special programs. In the second case, you just need to enter the required color into the program, and the system will independently calculate the percentage of paint and pigment.

Types of tinting pigments

Modern colors are available in two main types - organic and synthetic (inorganic). The first ones are distinguished by the widest choice of shades, but have one significant drawback– fading under the influence of sunlight. Synthetic colors are resistant to any weather conditions, but color palette less.

To obtain a perfectly correct and precise shade, a tinting system is used. Colorants for white paint are available in three forms:

The paste may or may not contain dispersing resins. Among the wide range, you can choose universal types that are perfect for enamel, water-based emulsion and other types. The pastes are easy to use and the shade can be adjusted during mixing. Disadvantage - no standard specifications according to the saturation of shades. Therefore, you may end up with a completely different tone. For example, you assumed that the color would be light red, but in fact it turned out dark red. Therefore, it is important to initially carry out experimental staining on a small area of the surface. The result is visible after drying.
Dry pigment is considered the most inexpensive. Before diluting the powder, you need to stir it into the base, depending on the type of paint. For example, if you have oil paint, then you should dilute the dry color in drying oil. Has many disadvantages. For example, it is difficult to adjust the exact color, and there is a small range of colors available.
Dyes in liquid form are produced on different bases, therefore they are considered specialized. The assortment includes colors for water-based or oil based etc. Thanks to this composition, the liquid pigment itself can be used as paint. In this case, the color will be as bright and saturated as possible.

Tinting methods

What is tinting for paint is already clear. But you can do it different ways. The choice depends on financial capabilities and preferences.

Tinting via computer

Computer tinting of paint in tinting machines is considered the most accurate.
Advantages:

speed of tone creation;
maximum accuracy;
the ability to choose colors for fans of almost all brands;
simultaneous tinting of several cans of paints at once;
savings for large work areas;
automatic selection of base colors for dark tones;
preservation of recipes and the ability to obtain new colors in the future.

The only disadvantage is the inability to do coloring directly on site.

Manual tinting

Do-it-yourself paint tinting involves manually mixing the components and independently selecting the pigment.

Process Features:

Manual mixing is used when you want to create a unique color consisting of several shades. It is also used if it is necessary to create a smooth transition of shades in one room.
It is very important to do a trial mixing and apply the resulting color to the surface until it dries completely. This is the only way you will get a perfectly accurate shade. This should be done under the same lighting in which the paint will be used.
Remember, artificial lighting can greatly change the shade of yellow and blue paint. The same applies to varying degrees to other colors. So be prepared for this. In short, cool tones look darker, and warm tones look lighter.
If the walls are painted over a large area, then in contrast to a small painted area, the color will also be perceived a little differently.
The main advantage of manual tinting is the ability to create color directly on the job site.
The disadvantage is that you will have to immediately mix the entire amount of paint needed to paint the intended area. Because in the future it will be impossible to create exactly the same shade. In this regard, computer tinting wins.

What equipment is used?

Specialized equipment for tinting is used both with the computer method and with the manual method:

A dispenser is required to serve exact quantity pigment into the total mass.
Mixer in the form of a mixer or shaker. When tinting at home, you can use an electric drill with a special attachment. Thanks to the mixer, it is possible to obtain the most homogeneous mass. Remember that the pigment can form peculiar threads and clusters.
The spectrophotometer is designed to read information even from a small stained sample. Thanks to this device computer program carries out color selection.

Coloring technology

Before tinting the paint, you need to calculate the color consumption, select the tone and prepare necessary tools. Of course, if you do it at home. To make the work easier, specialists have created a special tinting table, thanks to which you will know how to properly dilute the pigment and in what ratio. But you need to understand that it is quite arbitrary, and the proportion may differ depending on the paints and components used.

Rules for calculating colors

To correctly calculate the ratio, it is necessary to subtract a fifth from the amount of pigment. As an example, consider a color that is as close as possible to sea wave. To obtain this shade, you need to add blue and green colors to the white paint. For example, 200 ml of paint uses 10 drops of blue pigment and only 4 drops of green. To calculate the consumption per 5 kg of paint, you accordingly increase the amount of pigment by multiplying. As a result, we get: 250 drops of blue and 100 drops of green.

Mixing components - step-by-step instructions

Prepare several small containers. Remember, they must be perfectly clean.
Pour in the components to be tinted and be sure to record the quantities of ingredients.
Apply a small amount of the resulting paint to the surface that needs to be painted later.
Let it dry.
If necessary, apply another coat.
Color assessment is carried out only in daylight and after complete drying.
Once you have achieved the desired shade, you can begin tinting the entire mass of paint.
For a large area of painting, you will need many containers or one, but large one. If you use 3-4 small containers, then pour paint into it in exactly the same amount.
Wash the containers, wipe thoroughly and dry. Even the presence of dust should not be allowed.
Mix the laid out paint with a wooden stick and begin to gradually add color. Mix with a piece of wood first, then use an electric drill with a mixing attachment. This will ensure uniformity.
Next, you can paint the surface.

Remember that on a painted wall or other surface the shade always turns out 1-2 shades lighter than it looks in the jar. Therefore, carry out experimental tests on the same material on which the color will be applied.

Review of the most popular colors

Today the construction market is simply overflowing with various coloring pigments of any type and manufacturer. The following are considered the most popular and in demand among foreign and domestic pigments:

"Tikkurila Symphony" is used for tinting Tikkurila paint. It has a wide range of shades (2256), up to 10 only white. Used for interior finishing work. But for domestic customers, the company of the same name produces the Tikkurila Facade pigment. There are also options for adding color to antiseptics and varnishes.
Natural Color System (NCS) is produced according to Swedish and Norwegian standards. This system has 6 primary (base) colors and many shades. Thus, it turns out that the basic shades are qualified by letter designations, and the percentage of the main color in the color scheme is qualified by numbers.
"Tex" is produced specifically for water-dispersed dyes. It is of high quality, despite the fact that it is a domestic product. Manufactured from imported active pigments using German equipment.
"Aqua-Color" is produced in St. Petersburg. It is distinguished by versatility, high quality and a wide range of shades. Used for all paints and finishing works.
The manufacturing company Olki produces Unicolor paint. Intended for many types of LKS.
The Moscow Rogneda factory produces Dali coloring pigments. Also has high quality, used for enamels, whitewash, water-based paints. Can be used for all surfaces.

Read about it in the special material on our website.