DIY tree of happiness made from coffee beans. Beautiful coffee topiary: instructions for creating

Target: This tree was made for Children's Day.

The coffee tree makes a great birthday gift.

I want to dedicate this master class to everyone who likes coffee topiaries. Each master makes a coffee tree in his own way, based on his vision and imagination. Various materials can be used as decoration. These can be flowers made of paper, ribbons, burlap, lace, sisal, fabric, jute, small floral arrangements in the form of butterflies, ladybugs. The shape of such trees is also very diverse. I made my own coffee tree for the children of my group. The coffee tree makes a great birthday gift.

Necessary materials for making wood from coffee:

Aluminum wire;

Ball for “dry pool”;

Flower pot;

Alibaster;

Wooden skewers for shish kebab;

Dark fabric for the ball;

Various materials for decoration

Step-by-step process of making coffee tree:

Making a trunk for a coffee tree. Measure the length you need. It depends on the height of the pot and the size of the tree. You can make the trunk straight, but I suggest making it wavy. Apply glue to the wire and wrap it with twine.

Select the required size of the ball and make a puncture with the same wire wrapped in twine.

Cover the ball with fabric so that the red color does not show through (I took brown nylon).

We begin to cover the ball with coffee beans. I glue the grains on different sides.

Our ball is covered with grains. We leave it to dry.

While it is drying, we make a ladder of wooden skewers for fairy-tale characters.

Pour alibastra powder into the pot. Pour some water. Stir well. Place the tree trunks and ladder in the center of the pot and hold them in position until the alabaster sets. This will take a few minutes.

I cut thin strips from green paper.

I crush it a little with my hands and turn it into grass. I hide alibastra with our weed.

We decorate our coffee tree with beads, butterflies, ribbons, and fairy-tale characters.

The finished coffee tree can be coated with acrylic varnish for durability and shine, but it is better not to do this so that the aroma of coffee fills any room.

Excellent A coffee tree of happiness can become an interior decoration, which can be quite easily do it yourself. It consists of three parts - the crown of a decorative tree, the trunk and the base. They are prepared separately and then fastened together.

In this material we will look in detail at how you can make a coffee tree with your own hands at home and what materials and tools we will need for this. To make a tree crown, you can use a plastic or foam ball as a base, for example a ball, like in a children's dry pool. If desired, you can choose a different crown shape.

Previously in the crown of the coffee tree of happiness (or, as it is also called, decorative topiary ) from below you need to make a small hole for the trunk, for example, using a stationery knife or nail scissors, make a crosswise cut. After that topiary crown Can be covered with coffee beans. For the best flavor, you should buy fresh beans.

In the first layer, it is better to place the grains with the convex side up and as close to each other as possible. If you can’t place the grains too close, it’s okay, the second and third layers will still close the gaps. In the second layer, to create a “sloppy” effect, the grains should be glued in different ways, sometimes with the flat side, sometimes with the convex side. For the second layer, you should leave the most beautifully shaped grains.

The next layer of grains will be auxiliary, since with its help all the gaps remaining after the first two layers are closed. As a rule, the gaps between the grains remain small, so the thinnest grains are needed so that they can be glued edgewise. You can glue the grains with super glue or PVA glue. We have prepared for you Master Class(see below) with which you can easily make a coffee tree of happiness with your own hands from a photo with a detailed description of all stages of work.

Having prepared the crown, they begin to take on the trunk of the future tree. It can be made from different materials, but the easiest way is to find a beautiful branch of a tree. To paint it, you can use any color you like. A coffee crown on a golden trunk will look great. It is better to choose paint special for decorative work. Instead of painting, the trunk can be decorated with a beautiful rope, like a rope one.

Having prepared the trunk, it needs to be inserted into the hole previously left in the crown of the coffee tree. For strength, you can add plasticine to the hole. The gaps remaining around the trunk are also sealed with coffee beans in several layers.

Final stage - the base of the coffee tree of happiness. You can choose a beautiful bucket or flower pot for it. Inside, instead of soil, there can be different materials, for example, alabaster - a quickly hardening and firmly holding material. If the choice is alabaster, you need to work quickly, as it “sets” in just 3-5 minutes. That's why coffee tree trunk length must be determined in advance, before the tree is “planted” at the base. In order for the composition to have a neat appearance, the remains of the alabaster should be wiped off with a damp cloth, not only from the pot, but also from the trunk.

Already ready-made coffee tree can be further decorated. For example, you can glue several matching beads or a decorative ladybug, various flowers and ribbons onto the crown. The top layer of “soil” in a pot can also be made of coffee - it’s nice to look at and smells delicious, especially since it can be renewed periodically, because the beans do not stick, but are simply poured on.

A detailed master class with photos of the stages of work, with which you can make a coffee tree with your own hands.

Today I will demonstrate a master class on how to make a coffee tree with your own hands, this is a very exciting craft and I hope you like it. Such things are usually given to girls on March 8 or other holidays. By the way, we did something like this, the method of making this craft is similar. But for the tree to be exquisite, you need to make it completely, from beginning to end, the main thing is to observe all the moments in production, from the coffee top to the plaster pot where the tree is attached.
You will need coffee beans, so when purchasing this material, choose a coarse-grained variety, it is easier to work with and it is more beautiful, and all the beans in it are whole and do not break so often.

Material for creating a tree from coffee with your own hands:

— High quality coffee beans.
— A ball made of foam plastic or other material, with a diameter of 8-10 centimeters.
— Plaster or alabaster.
— Beautiful pot.
— Glue gun.
— Stick for the barrel, wooden or plastic, length 22-27 centimeters.
— Ribbons made of satin and nylon.
— Simple double-sided tape.
— Sharp scissors, large.
— Vessel for plaster or alabaster.

As usual, I take only high-quality materials and tools, and I advise you to treat crafts in the same way.
That's all that needed to be prepared, when all the material is in place, you can start making the craft.

Let's start creating a coffee tree, or as it is also called toparia. Pour the coffee beans onto the table, take a tree crown ball and a glue gun.

We glue one grain onto the ball, note that we glue the grains with the outer side towards us. The inner side is where the stripe is in the middle.

We pasted over the entire sphere like this, but do not forget to leave a place where you will need to insert the cane.

And now we do the same thing again, but on the second layer we turn the grain over and glue the inside side towards us. Thus, the white sphere will not be visible at all.

This is how the coffee ball turned out.

Take a cane and double-sided tape and wrap it around the entire length of the cane.

Then we wrap the cane with a satin ribbon, and since the tape is double-sided, the tape sticks and holds perfectly.

As you can see, you don’t have to wrap the edges, as one will be inserted into the pot, and the other into the sphere, and they will not be visible.

Now we make the lower part of the craft. Let's prepare a bucket and alabaster.

You need to pour water into the pot, almost completely and pour it into a bucket, then add alabaster and mix thoroughly until the mixture becomes thick.

Pour the prepared mixture into the pot and insert the cane straight into it. It is very important to install it evenly, then leave it for a while for the mixture to dry.

This is what the intermediate result looks like.

We also put them inside and glue them.

We also make the second layer with the grain turned upside down.

This is how beautiful it turned out.

Now carefully lubricate the top of the cane with glue, you need to pour more of it.

And immediately put the sphere on top of the cane. Hold until the glue dries.

Done, now all that’s left is to decorate it and that’s it.

We decorate the tree with nylon ribbon and tie a bow under the crown.

Make the bow bigger and fluffier.

Now you can make a coffee tree with your own hands.

And if you don’t like this type of crafts, then I can recommend making, or. All crafts require effort and learning, so I advise you to constantly develop your skills.

Topiary has become a popular interior element. It is made from different materials. One of them is coffee.

DIY coffee topiary. Step by step

A master class with detailed steps will help you make coffee topiary.

Glue onto the blank for the crown coffee beans, placing them with the central strip down.

The ball is completely covered. Then the next layer is glued, placing the grains with the strip facing up.

For the trunk is used a tube. You should step back three centimeters from its edge and glue double-sided tape in a spiral. Three centimeters of the tube are also left unsealed on the other side.

We wrap it on tape satin ribbon the desired color.

DIY coffee topiary master class. Photo

Take a container and pour water into it. Add to water alabaster until you get a mass similar to quite thick sour cream.

We transfer this mass into a flower pot and insert the trunk into it.

Alabaster must harden so that its surface becomes dry.

We also cover the surface of the alabaster in the pot with grains in two layers, like a ball.

Squeeze glue onto the top of the tube and glue the crown.

We decorate the resulting coffee topiary with a ribbon.

DIY coffee topiary in a bag

To make an original coffee topiary with your own hands, you don’t need any special materials.

DIY topiary made from coffee beans. Photo

The basis for the crown can be Christmas ball, and the barrel is a wooden kebab skewer.

Coffee beans are glued onto a ball and decorated skewer.

Can be used as a container for installation jar from under the cream. We wrap it in burlap, which we tie with a string around the neck.

Plaster is poured inside to fix the tree. The surface of the plaster is hidden by a cardboard circle filled with instant coffee.

Coffee topiary. Step-by-step guide with photos

The making of such topiary from coffee in a master class is described. Let us consider in detail the process of making such an interesting decorative composition.

They take wire twenty centimeters long, retreat from the end by seven centimeters and roll this part into a ring. Four centimeters are measured from the other end of the wire and bent at this point.

The saucer is degreased using alcohol. Glue the wire to the degreased surface with instant glue, the side with the ring.

Inner surface cups also wipe with alcohol and glue it to the other side of the wire. First, find a support that will support the cup while the glue sets. The glue hardening process can take several days.

When the foam hardens, cut off the excess amount. Removing foam. The thickness of the coffee beans is also taken into account. We need to make the stream look harmonious.

To form a volumetric mounting jet, you can use modeling mass or masking tape. The latter is convenient for wrapping the wire frame.

After excess foam has been removed, the surface paint. If this is not done, the white base will appear between the coffee beans.

A step-by-step master class on creating a coffee topiary is coming to an end gluing grains to the surface of the foam. It is better to glue them with transparent glue, which sets in a couple of minutes. This will allow you to adjust the location of the grains.

Coffee heart

You can make a coffee topiary with your own hands in a variety of shapes. One possible option is the heart.

To make it, draw a heart on paper, cut it out and trace it on cardboard. You need to make two cardboard hearts.

DIY coffee tree topiary. Photo

Two wire We wrap it in paper of the required length and glue it to the heart.

Glue it onto a cardboard surface cotton pads, and close the top with a second cardboard heart. This will create volume.

The outside of the resulting heart also needs to be covered with cotton pads. To give the required shape, it is wrapped threads.

The resulting base paint brown paint. Then we glue coffee beans onto its surface.

Glue it in a circle to an iron can sticks from ice cream.

Wire. We wrap the one glued to the heart with jute thread.

We attach a sponge to the resulting pot, and in it we place the trunk of a coffee topiary in the shape of a heart.

We decorate the surface of the pot and the topiary itself.

Coffee heart options

A rather discreet topiary, which is decorated only with small elements. The decoration used is a cinnamon star, which perfectly matches the smell of coffee, a harsh rope, and two thin ribbons, which perfectly match the color.

A very interesting coffee tree with a heart-shaped crown. The grains are arranged in even rows, which gives the composition a special effect. There is no need for bright decorations. One modest bow is enough.

Coffee tree with a regular crown. The special decor makes it unusual. This includes a bright bow with hearts and an absolutely straight trunk wrapped in rope.

how to make topiary from coffee beans. Photo

The decor and shape of the trunk gives this coffee tree its tenderness. The slightly curved trunk looks elegant. White and soft green details perfectly set off the other colors of this composition.

A bright and elegant coffee heart, decorated with red roses with shiny petals. The decor is emphasized with a double bow with the same color combination.

Coffee topiary with several crowns

To create such an unusual coffee topiary with your own hands you will need six foam balls. They need to be wrapped with threads, the ends of which are secured with glue. Coffee beans are glued on top, flat side down. When gluing, you should leave a small space for attaching the support.

Double aluminum wire Divide into several parts to form a branched crown. The end of one wire is divided into two parts so that the structure becomes stable.

We bend the trunk, and secure additional branches with masking tape. Then we split all the upper ends into two parts and bend the branches.

To make the trunk aesthetically pleasing, we first wrap it with masking tape. This will create a thickening at the bottom, like a real tree. Coarse tape is wound over the masking tape. twine.

We put coffee balls on the ends of the branches, smeared with glue. A tree is installed in the selected pot and the base is filled with plaster. The plaster surface is also decorated with coffee beans after drying. You can stick another layer of coffee on the crown.

Coffee topiary: video

The process is most clearly explained by a video master class on creating a coffee topiary. For the crown, take a foam ball, which is wrapped with paper and thread. On one side there is a hole for the barrel. Coffee beans are glued to the surface with transparent glue. The parts of the trunk are fixed in the pot using a gypsum compound. A ball is put on this trunk, which is covered with grains. Next, the surface of the plaster in the pot is decorated. To do this, it is also covered with coffee beans. At the end, the finished topiary is decorated. To do this, you can take various ribbons and other decorative elements.

Video: heart-shaped coffee topiary

This step-by-step coffee topiary tutorial shows how you can decorate a fairly ordinary topiary container in an interesting way. A transparent glass cup is used as such a container. Braids woven from simple, rough rope are glued onto it. The result is a textured piece that matches the smooth glass. Liquid plaster is placed inside the cup, into which the topiary is installed. After the plaster has hardened, the edges of the cup are decorated with coffee beans, and white pebbles are placed on the surface. As a result, the heart-shaped topiary looks more harmonious, thanks to the interestingly decorated base.

Topiary coffee magnet

Let's make a topiary magnet from coffee. A step-by-step master class will help with this.

To make such a topiary we do cardboard blanks. To do this, draw a round crown and a pot, and then cut them off.

Assembling a tree using a wooden stick from ice cream. We insert it between two pieces of cardboard and glue it.

We paste over burlap cardboard parts on both sides.

Glue on the back side magnets.

Glue coffee beans onto the front side. Glue the first row along the edge with the flat side down, and the second row with the flat side up. We fill the center with grains, and then glue the second row.

We decorate the finished topiary.

Base for topiary from a branch

To make the basis for a step-by-step master class on creating a coffee topiary, it is not at all necessary to take special components. A branch and old newspapers can be used.

From newspapers the ball is made. Branch Lubricated with glue and placed in it. The newspapers need to be pressed closer to it.

The surface of the ball is coated glue and wrapped around threads. The next layer of newspapers is wrapped around it, which is also wrapped with thread and coated with glue. The procedure is repeated until the desired size is obtained.

The finished crown on the trunk is installed in a container filled with gypsum. Gypsum You need to dilute it to the consistency of sour cream and pour it into the desired container. The trunk is installed there and kept as straight as possible until the plaster hardens.