What should a 3rd category installer know? Installer for installation of steel and reinforced concrete structures

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.


Instructions for the position " Construction assembler 3rd category", presented on the website, meets the requirements of the document - "DIRECTORY OF Qualification Characteristics of Workers' Professions. Issue 64. Construction, installation and repair work. (Taking into account the additions approved: by order of the State Committee for Construction and Architecture No. 25 of 08.08.2002, No. 218 of 12.22.2003, No. 149 of 08.29.2003, letter of the State Committee for Construction and Architecture No. 8 / 7-1216 of December 15, 2004, by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of December 2, 2005, N 163 of May 10, 2006, N 399 of December 5, 2006, by order of the Ministry of Regional Development , construction and housing and communal services of Ukraine N 558, December 28, 2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on October 13, 1999 N 249. Agreed by the Ministry of Labor and social policy Ukraine. Entered into force on January 1, 2000. The document status is "valid".

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General provisions

1.1. The position "Construction installer, 3rd category" belongs to the category "Workers".

1.2. Qualification requirements - complete general secondary education and vocational technical education without work experience requirements or complete general secondary education and vocational training in production. Advanced training and work experience in a related profession 2nd category - at least 1 year.

1.3. Knows and applies in practice:
- main types of parts and elements of steel, monolithic and prefabricated concrete and reinforced concrete structures;
- rules and types of slinging;
- rules and methods of temporary fastening of structures;
- simple ways checking the density of welding seams;
- signaling rules during installation;
- rules for transportation, storage of structures and products;
- rules for preparing surfaces for insulation;
- methods of protecting metal from corrosion;
- basic properties wall materials, solutions, waterproofing materials for insulation of foundations and walls;
- simple systems masonry and seam dressing;
- masonry techniques simple walls;
- methods of spreading mortar on the wall, decomposition of bricks and backfill;
- methods of punching nests and holes in masonry;
- main types of fittings;
- fundamentals of the structure of reinforcement structures;
- rules for procurement of reinforcement;
- techniques for assembling, installing and fastening simple reinforcement and reinforcement structures;
- tolerances during the manufacture and installation of reinforcement and reinforcement structures;
- signaling rules during installation of reinforcement structures;
- basic properties and grades of cement, aggregates and other concrete mixtures;
- basic methods of supplying, laying and compacting concrete mixtures;
- rules for drawing up formwork simple designs;
- techniques for dismantling concrete and reinforced concrete structures, laying foundations, walls and pillars using pneumatic and power tools;
- types of main rigging, installation equipment and devices;
- fundamentals of the structure of manual, driven and semi-automatic machines on which fittings are made;
- structure and purpose of mechanical, electrical and pneumatic tools, rules for working with them;
- requirements for the quality of materials and structures;
- requirements for the quality of work;
- rules of compliance with fire and electrical safety;
- labor protection rules when performing work at height.

1.4. A construction installer of the 3rd category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. A construction installer of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. A construction installer of the 3rd category supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During his absence, a construction installer of the 3rd category is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Performs simple work during the installation and assembly of steel and prefabricated concrete, reinforced concrete structures, masonry and repair of masonry structures of buildings, bridges, industrial and hydraulic structures, production and installation of reinforcement and reinforcement structures, concreting of monolithic concrete and reinforced concrete structures.

2.2. Knows, understands and applies current regulatory documents relating to his activities.

2.3. Knows and complies with the requirements of regulations on labor protection and environment, complies with the standards, methods and techniques of safe work performance.

3. Rights

3.1. A construction installer of the 3rd category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. A construction installer of the 3rd category has the right to receive all social guarantees provided for by law.

3.3. A construction installer of the 3rd category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. A construction installer of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. A construction installer of the 3rd category has the right to get acquainted with draft documents relating to his activities.

3.6. A construction installer of the 3rd category has the right to request and receive documents, materials and information necessary to perform his job duties and management orders.

3.7. A construction installer of the 3rd category has the right to improve his professional qualifications.

3.8. A construction installer of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. A construction installer of the 3rd category has the right to familiarize himself with documents defining the rights and responsibilities of his position, and criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. A construction installer of the 3rd category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. A construction installer of the 3rd category is responsible for failure to comply with internal labor regulations, labor protection, safety regulations, industrial sanitation and fire protection.

4.3. A 3rd category construction installer is responsible for disclosing information about an organization (enterprise/institution) that is a trade secret.

4.4. A construction installer of the 3rd category is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. A construction installer of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. A 3rd category construction installer is responsible for causing material damage to an organization (enterprise/institution) within the limits established by current administrative, criminal and civil legislation.

4.7. A construction installer of the 3rd category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Slinging of steel, concrete and reinforced concrete structures and parts.

5.2. Installation of reinforced concrete lintels over window and doorways, niches.

5.3. Installation of channel formers.

5.4. Temporary fastening of structures.

5.5. Cleaning joints of prefabricated structures.

5.6. Fastening mounting bolted connections.

5.7. Installation of self-tapping bolts.

5.8. Coating welding seams with kerosene and chalk while checking their density.

5.9. Elimination of shaped steel on manual screw presses.

5.10. Insulation of concrete and reinforced concrete structures.

5.11. Punching openings, grooves, nests, holes in brick and rubble walls, dismantling masonry walls and bridge supports using mechanized, electric and pneumatic tools.

5.12. Laying bricks and cementing with concrete the joints of beams, purlins, crossbars with columns, non-removable places, grooves, nests, potholes and holes.

5.13. Sealing joints with special sealants and applying them with a brush or spatula.

5.14. Preparation of sealants manually according to a specific composition.

5.15. Laying simple walls made of bricks and small blocks under plaster or with mortar at the same time as masonry.

5.16. Completeness of frame walls.

5.17. Construction of foundations made of rubble stone and crushed brick for pouring.

5.18. Device cement screed, horizontal waterproofing of foundations with rolled materials.

5.19. Filling the ends of beams, grooves, nests, potholes and holes with brick or concrete.

5.20. Unwinding and extraction of reinforcing steel using electric winches.

5.21. Cutting reinforcing steel using driven and semi-automatic machines.

5.22. Bending of reinforcing steel using manual and mechanical machines, in the case where there are no more than four bends in the rod.

5.23. Marking, decomposition of rods and frames in formwork of simple structures.

5.24. Assembly and installation of simple meshes of flat simple frames weighing up to 100 kg.

5.25. Installation and fastening of simple embedded parts.

5.26. Installation of reinforcement from individual rods in foundations and slabs.

5.27. Laying concrete mixture in foundations, bases, arrays, on horizontal planes.

5.28. Device concrete foundations under pouring, underlying layers and concrete foundations floors, cement screed.

5.29. Notching and breaking concrete and reinforced concrete structures, cutting the heads of reinforced concrete piles with pneumatic and electric tools.

February 3, 2020 - Responsibilities: Assembly and completion of ships at air cushion and small vessels: Laying systems. Installation of units and components. Assembly metal structures. Installation of components and parts on the vessel. Requirements: Assembly, adjustment of machines, units and various...

January 21, 2020 - Responsibilities: Manufacturing, knitting, testing cables and harnesses; Manual installation REA (DIP, SMD with standard size no less than 0402, microcircuits with a pitch of 0.3 mm); Installation by circuit diagrams REA with printed and mixed installation of high density; Forming leads...

January 16, 2020 - Responsibilities: 1. Perform slinging, moving, laying and unslinging equipment using universal remedies rigging; 2. Move equipment hydraulic jacks, rack and pinion jacks, electric winches and cranes; 3...

January 15, 2020 - Responsibilities: Performing construction and installation work at the company’s fields Requirements: Experience in the oil and gas industry gas industry, construction for at least 3 years Slinger's certificate 3 r. Certificate for process pipeline installer...

January 19, 2020 - Responsibilities: Design and principle of operation of the mounted equipment, wall-mounted installation, surface mounting. Requirements: Intermediate vocational education Conditions: Full compliance with the Law Russian Federation. Indefinite employment contract...

January 29, 2020 - Responsibilities: Installation of particularly complex assemblies with mixed installation from various electrical electronic components (microcircuits, microassemblies, open-frame elements) on printed circuit boards ah, sensors of physical and electrical quantities; Installing and fastening them using adhesives and compounds; Varnishing...

February 7, 2020 - Tasks: Dismantling/installation of DIP and SMD elements. Soldering chip elements with size (0201,0402, 0603, etc.). Soldering microcircuits housing (BGA, QFN, LGA, etc.). Installation of particularly complex boards and blocks, assemblies with mixed installation. Cleaning of printed circuit boards (Ultrasonic bath) ...

February 5, 2020 - Responsibilities: performing a set of works of medium complexity during the installation of metal, prefabricated concrete and reinforced concrete structures Requirements: secondary vocational education, work experience of at least 3 years, grade not lower than 3 Conditions: five-day working...

February 3, 2020 - Requirements: Profile special education; work experience in the specialty for at least 5 years; not lower than 3rd category; Responsibilities: Operation and maintenance of central heating equipment, cold water and hot water systems, heating networks, sanitary equipment and sewerage. Conditions: ...

February 1, 2020 - Responsibilities: Installation of ventilation systems. Assembly of air handling units. Installation of air ducts. Commissioning of ventilation systems. Installation of thermal insulation and fire protection. Work with power tools (Rotary hammer, angular grinding machine, electric scissors) ...

January 29, 2020 - Responsibilities: installation of foundations for portals and equipment installation of metal structures Requirements: experience in construction of at least 5 years, availability of documents, certificates confirming qualifications Conditions: the object is located in Troitsk (New...

February 6, 2020 - Responsibilities: maintenance, installation, repair, adjustment, insulation of heating systems, hot water supply, hot water supply, fuel assemblies and steam; Requirements: secondary technical education (plumber 3-5 categories); work experience of 2 years. Conditions: work on a shift schedule; registration...

February 5, 2020 - Installers of steel and reinforced concrete structures are required for the construction site of a museum, cultural and educational complex in Vladivostok (Russky Island). Responsibilities: Assembly of metal structures for the construction of buildings and structures. Cleaning seams...

February 5, 2020 - Professional requirements: Education: primary, secondary vocational. Sign up for work book‚ confirming experience and rank (at least 4-6) Work experience of at least 3 years in the specialty is required. Experience in defense industry enterprises is preferred...

February 5, 2020 - Responsibilities: Installation of art. and reinforced concrete structures. Reading drawings, wiring diagrams Requirements: Work experience is required for at least 3 years. Availability of a qualification certificate of at least 4 categories. Slinger's certificate Conditions: work on a rotational basis in Ust-Luga...

February 5, 2020 - Responsibilities: Installation of pipelines and technological equipment. Requirements: Grade 3-6 Experience of at least 1 year. Conditions: Work for food production Schedule: 5/2 from 8:00-17:00 ...

February 5, 2020 - Responsibilities: - Installation of reinforced concrete structures. Requirements: - Official employment in accordance with the Labor Code of the Russian Federation; - Schedule 5/2 from 8.00 to 17.00 Conditions: - Specialized secondary education; - 2 years of experience working on construction sites; - Availability of 3-5 category...

January 24, 2020 - Responsibilities: Repair, production of formwork, installation of formwork and building products; Working with scaffolding, scaffolding, fences, etc.; Work with hand and gas-powered tools. Requirements: Secondary technical education; Carpenter-installer 3-4 categories; ...

February 4, 2020 - Installers required for installation of steel and reinforced concrete structures 4, 5 r. Requirements: 3 years of experience. availability of documents is required Conditions: five days from 8 to 17.00. business trips possible...

February 4, 2020 - Required work experience: 1–3 years Full time, full time To work on a rotational basis, installers are required for the construction of an office building in the Ryazan region. Requirements: Experience of at least 1 year in construction, from category 4. Entry in the work book...

February 8, 2020 - performance of duties as an installer of MK and RCC in accordance with the job description Contact person: Ivanova Maria Vladimirovna Our requirements: experience as an installer of MK and RCC for at least 1 year with an entry in the work book Additional information: Heavy...

February 1, 2020 - In accordance with the job description of an installer of metal structures and reinforced concrete structures Contact person: Ilya Aleksandrovich Dmitriev Our expectations: The employer imposes additional requirements on the applicant - work experience of at least 1 year Additional information: Installer of metal structures...

February 1, 2020 - Carrying out work on the assembly, installation and installation of crane travel mechanisms. Requirements for candidates: Shift work, work in Izhevsk. Providing housing, paying for travel. Work experience from 1 year. Additional information: * TT installer. Job...

February 8, 2020 - Dismantling, repair, installation of technological equipment and related structures, installation work on objects. Assembly of metal structures from pipelines Contact person: Voronkov Roman Igorevich Requirements: Experience of at least 1 year. Registration in labor...

February 9, 2020 - Sanitary systems and equipment. Profile education, work experience of 3 years. Contact person: Alexandra Anatolyevna Nosacheva Qualification: Sanitary systems and equipment. Profile education, work experience of 3 years. Additional...

February 8, 2020 - The responsibilities of the installer are to carry out construction, installation and renovation work. Contact person: Valery Sergeevich Kostrenkov Requirements for candidates: Education level is not specified, work experience is required, discipline Additional information: ...

February 8, 2020 - Perform assigned functions efficiently and in a timely manner in accordance with the requirements. Contact person: Ilya Nikolaevich Pivovarov Our expectations: In the Information on the need for employees, additional wishes for the employee’s candidacy are not indicated...

February 8, 2020 - Installation of units, blocks, radio-electronic equipment, communication equipment and computers of average complexity according to wiring diagrams with complete sealing and desoldering of wires and connections, cleaning, sealing, fastening with adhesives and mastics. Dismantling blocks,...

February 8, 2020 - performs work on the installation of linear structures cable lines communications; carries out cutting of communication cables; straightens cables; installs and removes a tent over a pit or well Contact person: Istomina Marina Aleksandrovna Requirements...

February 3, 2020 - Responsibilities according to job description and regulatory documents. Contact person: Yuretskaya Irina Vasilievna What we expect from you: Experience in pipeline installation. Availability of a qualification certificate for the profession. Additional information:...

February 2, 2020 - Job responsibilities include installation of technological equipment. Contact person: Marianna Radikovna Gafurova Our expectations: The employer has no additional wishes for the employee’s candidacy. Additional information: Business trips are possible. Heavy...

January 28, 2020 - An employee’s job responsibilities are determined by job descriptions and internal labor regulations adopted by the organization. The employee is obliged to comply with labor protection requirements and rules fire safety. Contact person: MERZLYAKOVA...

January 28, 2020 - Carrying out work on the installation of internal sanitary systems and equipment. Contact person: Inna Aleksandrovna Steinberg Our requirements: Conscientious attitude to official duties, discipline. Additional information: New...

January 27, 2020 - Performs complex installation work during the assembly of buildings and structures from individual elements and enlarged blocks. Knows, understands and applies current regulations relating to his activities. Knows and complies with regulatory requirements...

January 19, 2020 - In the form for information about the need for workers in job responsibilities The employee's employer indicated: installation of a process pipeline. Contact person: Ryazanova Svetlana Aleksandrovna Requirements for the candidate: In additional wishes for the candidacy...

January 16, 2020 - Carries out installation of steel and reinforced concrete structures at sites Contact person: Zlobin Valery Vladimirovich Our expectations: Work experience in the specialty of the applicant applying for this vacancy is welcome. Send your resume to...

The second name (synonym) for this specialization is 3rd category installer, 3rd category. In the ranking for this request, the page occupies position 0. Fixed minimum size earnings - 25,000 rubles. The maximum monthly salary for this request is 64,000 rubles. Indicators of work opportunities in the specialization of installer 3rd category 3rd category in Russia. For those applying for the vacancy “installer 3rd category 3rd category,” today the most popular salary value is 45,500 rubles. The vacancy for “installer 3rd category 3rd category” in the most popular form of employment has 1 position. List of similar vacancies in the requested specialization:

Distribution schedule for vacancies “installer 3rd category 3rd category” by salary

“Installer of steel and reinforced concrete structures”;
“Process pipeline installer”;
"Installer for installation of frame-cladding structures."

Median salary for the vacancy “installer 3rd category 3rd category” in other cities

Currently, there are 612 vacancies for “installer 3rd category, 3rd category” posted on job search sites. The median salary for representatives of this profession is 45,500 rubles. The category has the following specializations:. For the vacancy for the position of installer, 3rd category, 3rd category, average wages for one month is approximately 47400. In most cases, this position requires a full-time form of employment. Employers usually indicate the types of employment for a given specialization: “full time”, “full time”. Companies hiring workers with the specialty “installer 3rd category 3rd category”:

Excelsior;
"Region StaffingGroup";
"FORWARD COMPANY";

Modern construction consists almost entirely of prefabricated structures. This especially applies to structures such as towers, steel bridges, panel buildings. Everywhere, in one way or another, large units are used, which are produced at the factory, transported and connected together at the construction site.

And here we cannot do without a special category of workers - installers.

What exactly does a steel and reinforced concrete structure installer do?

The work of an installer in the construction industry is extremely complex and varied. In the most general sense, it is responsible for connection various elements into a single whole.

In practice, the installer of reinforced concrete structures and steel structures performs a lot of different duties:

slinging and lifting parts to a height ( rigging work);

welding of elements;

tightening of connections, including self-tapping bolts;

installation of volumetric blocks various designs;

assembly of structures from large parts using various equipment(steel chimneys, bridge spans, cable-stayed structures, etc.);

sealant treatment of joints and connections of various metal structures.

As you can see, the range of responsibilities of a construction installer is extremely wide. At the same time, as qualifications increase, the requirements for skills also increase.

On initial stage such a specialist is usually engaged in small-scale assembly and various auxiliary work: slinging, lifting parts to a height, threading nuts and bolts, etc. Moreover, such installers are usually involved in civil engineering– most often they can be found at the construction site of residential or office buildings. They also work under the supervision of a foreman or a more qualified installer.

A highly qualified specialist can already participate in the construction of strategic facilities: nuclear power plants, hydroelectric power stations, factories, etc. At the same time, they can install three-dimensional structures using any equipment, including helicopters.

Working conditions and requirements for installers of steel and reinforced concrete structures

Needless to say, the work of a builder is never easy. Work outdoors, at any time of the year and in any weather. Excellent health and stamina are required, so only men are suitable for such a position. At the same time, working on a construction site (especially at height) is always accompanied by a risk to life.

It is not without reason that high-altitude installers are considered professionals of the highest class, given the enormous responsibility that rests on their shoulders.

First of all, such specialists, of course, require the ability to work with their hands, responsibility and hard work.

Second aspect– this is the strictest adherence to safety regulations, especially when it comes to work at height (installers spend 90% of their working time there).

Hence it follows third requirement– ability to work in a team, listen to instructions from superiors, be able to use radio communications and actively interact with colleagues.

Of course, a highly qualified installer must know how to handle all types of installation, including large and heavy structures (pipes, bridge spans, trusses and other voluminous parts).

He must also know the rules for installing rigging equipment, including complex ones. If you do not fully master this skill, the load can twist and turn at a height, so that later it will be impossible to orient it for installation. You'll have to lower it to the ground, re-sling it and start the whole operation all over again. If poorly secured, a multi-ton structure can completely break the slings and collapse directly on the heads of the workers below.

Where to learn to become an installer of steel and reinforced concrete structures

To successfully work as an installer of steel and reinforced concrete structures, you must obtain a specialized secondary specialized education, as well as permission to work at heights.

Installer education is given in specialized educational institutions SPO (construction colleges and technical schools). There are many in Russia government agencies who provide such education.

In addition, a number of large enterprises have their own training centers for advanced training and retraining of personnel.

Qualification categories for installers of steel and reinforced concrete structures according to ETKS

The Unified Tariff and Qualification Directory of blue-collar professions reflects six qualification categories specialty of builder-installer – from 2 to 7.

Installer of steel and reinforced concrete structures, 2nd category

Mainly engaged in auxiliary work (slinging structures, lifting a hand winch to a height, punching holes and grooves in reinforced concrete structures, etc.);

Installer of steel and reinforced concrete structures, 3rd category

Performs simple operations directly related to the installation of structures: tightening bolted connections, laying slabs road surfaces, straightening shaped steel on presses, sealing joints of parts, etc.

Installer of steel and reinforced concrete structures 4th category

Assembly of reinforced concrete beams no more than 12 meters long, installation of foundation blocks weighing up to 8 tons, installation of steel frames of industrial furnaces weighing up to 5 tons and others technological operations. Also receives the right to install some structures at hydroelectric power stations.

Installer of steel and reinforced concrete structures 5th category

Has the right to mount individual designs at nuclear power plants (pipe passages) and hydroelectric power plants, install pipes up to 30 meters high, steel columns weighing up to 15 tons, etc.

Installer of steel and reinforced concrete structures, 6th category

Can carry out large-scale assembly of reinforced concrete frames, beams and trusses with subsequent tensioning of reinforcement. Can mount large components when assembling furnaces, building structures and structures at nuclear power plants, thermal power plants, hydroelectric power plants, etc.

Installer of steel and reinforced concrete structures, 7th category

Able to carry out any technological operations on installation and objects of any complexity, including the use of a helicopter.

Average salary for an assembler of steel and reinforced concrete structures in Russia

It is clear that for such highly qualified specialists, wages cannot be low. However, everything very much depends on the construction site. At the initial stage, the employer can offer no more than 30 thousand rubles for shift work.

It’s a completely different matter - shift work at industrial facilities. Here, wages start from 80 thousand rubles. But at the same time, the requirements for specialist skills are extremely high. The highest demands, of course, are placed on specialists in the nuclear industry, but wages in this area are one of the highest among blue-collar professions - about 120 thousand rubles plus bonuses and allowances.

Pros and cons of working as a builder-installer

Obvious advantages of the profession:

decent wages;

the opportunity to continuously improve qualifications and professionalism;

“northern” allowances and length of service in case of work on a rotational basis;

official employment according to Labor Code.

Cons there is also plenty:

difficult working conditions;

high demands to qualifications and experience;

Risk to health and life at a construction site.

Installer for installation of steel and reinforced concrete structures, 3rd category

Sample instructions for an installer for the installation of steel and reinforced concrete structures of the 3rd category

The sample job description is compiled taking into account the professional standard

1. General provisions

1.1. Installer for installation of steel and reinforced concrete structures 3rd

category is a worker and reports directly to ……… (name of position/profession of the manager)

1.2. To work as an assembler for the installation of steel and reinforced concrete structures of the 3rd category, a person who has reached the age of 18 years is accepted:

1) completed training programs vocational training by professions of workers, retraining programs for workers;

2) having experience as an assembler in the installation of steel and reinforced concrete structures of the 2nd category for at least one year.

1.3. A person is allowed to perform the work specified in paragraph 1.2 of these instructions:

1) passed in accordance with the Procedure for conducting mandatory preliminary and periodic medical examinations (examinations) of workers engaged in heavy work and work with hazardous and (or) dangerous conditions labor, approved By Order of the Ministry of Health and Social Development of Russia dated April 12, 2011 N 302n, mandatory preliminary (upon entry to work) and periodic medical examinations (examinations), as well as extraordinary medical examinations (examinations);

2) completed training safe methods and methods of performing work, instruction on labor protection, on-the-job training and testing of knowledge and labor protection requirements.

1.4. Carrying out independent steeplejack work can be entrusted to an installer for the installation of steel and reinforced concrete structures of the 3rd category, recognized as fit for this work based on the results of a medical examination, if he has at least 1 year of experience in steeplejack work under the supervision of a more experienced worker, provided he is provided with a safety belt .

1.5. An installer for the installation of steel and reinforced concrete structures of the 3rd category must know:

1) documents, objects, methods and techniques for performing lower-skilled work, provided for by production (professional) instructions and (or) professional standard;

2) types of main rigging and installation equipment and devices;

3) main types of parts of metal and prefabricated concrete and reinforced concrete structures;

4) ways:

Slings building structures and their bridging;

Protecting metal from corrosion;

Density checks welds;

Alarms when lifting, lowering and installing building structures, when installing them at height and in cramped conditions;

Fastening steel ropes with bolt clamps;

Temporary fastening of structures using devices;

Unwinding and rewinding ropes;

5) rules for transportation and storage of structures and products;

6) rules for preparing surfaces for insulation;

7) basic properties and brands of concrete mixture, sealants;

8) rules for lifting, lowering and installing building structures when installing them at height and in cramped conditions;

9) signaling rules when transporting structures;

10) marking of prefabricated structural elements;

11) rules for installing large-panel formwork from ready-made panels;

12) the sequence of dismantling large-panel formwork from finished panels;

13) rules for temporary fastening of structures using devices;

14) rules for adjusting guy ropes to keep structures from swaying and tightening bolted connections;

15) marking of self-tapping bolts;

16) types of rigging units;

17) types of main rigging and installation equipment and devices;

18) methods and rules for installing and dismantling blocks, hoists, pulleys, winches and jacks with a lifting capacity of up to 10 tons;

19) ……… (other requirements for necessary knowledge)

1.6. An installer for the installation of steel and reinforced concrete structures of the 3rd category must be able to:

1) perform work (operations, actions) at lower levels;

2) use the main types of rigging and installation equipment and devices for their intended purpose;

3) perform slinging of structures, slinging and unslinging of building structures;

4) check the tightness of the welds;

5) protect metal from corrosion;

6) use in work the main types of rigging and installation equipment and devices with a lifting capacity of up to 10 tons;

7) prepare the surface for insulation;

8) give signals when lifting, lowering and installing building structures when installing them at height and in cramped conditions;

9) prepare fastening elements for installation of structures;

10) install fasteners;

11) perform temporary fastening of structures using devices;

12) verify the location of the structure along axes, diagonals, marks;

13) secure structures from swaying;

14) maintain steel ropes in working condition;

15) use a manual screw press;

16) knit rigging knots;

17) use rigging and installation equipment and devices for their intended purpose;

18) comply with labor protection requirements while on site construction site, fire safety, electrical safety and safety during installation work;

19) comply with the rules of industrial sanitation and occupational hygiene, use personal protective equipment;

20) provide first aid to a victim in an industrial accident;

21) ……… (other requirements for necessary skills)

1.7. ……… (other general provisions)

2. Labor functions

2.1. The labor functions of an assembler for the installation of steel and reinforced concrete structures of the 3rd category are:

2.1.1. Complex simple work when installing metal, prefabricated concrete and reinforced concrete structures:

1) preparation of structural elements for installation;

2) simple installation of structural elements;

3) performing work on temporary fastening of mounted structures;

4) performing auxiliary work during easy installation metal, prefabricated concrete and reinforced concrete structures.

2.1.2. Guiding installers in the installation of steel and reinforced concrete structures of lower qualifications (grade).

2.2. ……… (other functions)

3. Responsibilities

3.1. Before the start of the working day (shift), an installer for the installation of steel and reinforced concrete structures of the 3rd category:

1) undergoes a pre-shift (preventive) medical examination in accordance with the established procedure;

2) receives a production task;

3) if necessary, undergoes training on labor protection;

4) takes over the shift;

5) checks the serviceability of devices, tools, equipment, etc., personal protective equipment;

6) ……… (other duties)

3.2. In the process of work, an installer for the installation of steel and reinforced concrete structures of the 3rd category:

1) performs the work for which he has been instructed and authorized to work;

2) uses special clothing, safety shoes and other personal protective equipment;

3) receives instructions from the immediate supervisor on the performance of the task, safe techniques and methods of work;

4) complies with the rules for using technological equipment, devices and tools, methods and techniques for performing work safely;

5) immediately notify the immediate supervisor of all deficiencies discovered during work;

6) complies with the requirements of personal hygiene and industrial sanitation;

7) ……… (other duties)

3.3. During the working day (shift), an installer for the installation of steel and reinforced concrete structures of the 3rd category performs the following duties as part of his job functions:

3.3.1. Within the framework of the labor function specified in subparagraph 1 of paragraph 2.1.1 of these instructions:

2) selects the tools and materials necessary for the work in accordance with the team leader’s assignment and the project;

3) cleans the joints of mounted structures;

4) coats welds with kerosene and chalk when checking them for density;

5) installs gaskets and strips;

6) lifts and lowers building structures and equipment manually and using mechanisms to the installation site;

7) seals the ends of beams, grooves, nests, potholes and holes with brick or concrete.

3.3.2. Within the framework of the labor function specified in subparagraph 2 of paragraph 2.1.1 of this instruction:

1) organizes workplace in accordance with the assignment and safety requirements when performing this work;

2) carries out installation:

Mobile buildings and structures from inventory block containers, their dismantling;

Prefabricated partitions and internal walls;

3) performs the joining of shipping factory elements of metal structures with the alignment of holes;

4) carries out installation and dismantling of large-panel formwork from finished panels;

5) performs:

Laying pavement slabs;

Insulation of concrete and reinforced concrete structures;

Sealing joints and non-replaceable places with concrete;

Sealing joints with sealants by applying them with a brush or spatula.

3.3.3. Within the framework of the labor function specified in subclause 3 of clause 2.1.1 of this instruction:

1) organizes the workplace in accordance with the task and safety requirements when performing this work;

2) does:

Installation of self-tapping bolts;

Temporary fastening of structures;

Installation of mounting bolts;

Tightening of bolted connections, seal units;

Reconciliation assembled structure along axes, diagonals, marks;

Adjustment with guy ropes to keep structures from swaying.

3.3.4. Within the framework of the labor function specified in subclause 4 of clause 2.1.1 of this instruction:

1) organizes the workplace in accordance with the task and safety requirements when performing this work;

2) does:

Fastening steel ropes with bolt clamps;

Straightening of shaped steel using manual screw presses;

Tying of rigging knots;

Unwinding and rewinding ropes;

Installation and dismantling of blocks, hoists, pulleys, winches and jacks with a lifting capacity of up to 10 tons.

3.3.5. Within the framework of the labor function specified in paragraph 2.1.2 of this instruction:

1) issues shift assignments to installers for the installation of steel and reinforced concrete structures of lower qualification (category);

2) organizes and coordinates the work of installers for the installation of steel and reinforced concrete structures of lower qualifications (grade);

3) gives instructions and explanations on the performance of work to installers for the installation of steel and reinforced concrete structures of lower qualifications (category);

4) carries out quality control of work performed by installers for the installation of steel and reinforced concrete structures of lower qualifications (grade).

3.4. At the end of the working day (shift), an installer for the installation of steel and reinforced concrete structures of the 3rd category:

1) puts devices and tools in proper condition and transfers them for storage;

2) removes dirt from workwear and safety shoes, if necessary, places them for drying and storage;

3) submits established reports;

4) performs an inspection (self-examination);

5) hands over a shift;

6) ……… (other duties)

3.5. As part of the performance of his labor functions, an installer for the installation of steel and reinforced concrete structures of the 3rd category:

1) carries out instructions from his immediate supervisor;

2) undergoes periodic medical examinations (examinations), as well as extraordinary medical examinations (examinations) in the manner established by the legislation of the Russian Federation;

3) ……… (other duties)

3.6. ……… (other provisions on responsibilities)

4. Rights

4.1. When performing his job functions and duties, an installer for the installation of steel and reinforced concrete structures of the 3rd category has labor rights provided for by the agreement concluded with the employee employment contract, Internal labor regulations, local regulations organizations, the Labor Code of the Russian Federation and other acts of labor legislation.

4.2. ……… (other provisions on employee rights)

5. Responsibility

5.1. An installer for the installation of steel and reinforced concrete structures of the 3rd category is subject to disciplinary liability in accordance with Art. 192 Labor Code Russian Federation for improper performance through his fault of the duties listed in this instruction.

5.2. An installer for the installation of steel and reinforced concrete structures of the 3rd category bears financial liability for ensuring the safety of inventory items entrusted to him.

5.3. An installer installing steel and reinforced concrete structures of the 3rd category for committing offenses in the course of his activities, depending on their nature and consequences, is subject to civil, administrative and criminal liability in the manner prescribed by law.

5.4. ……… (other liability provisions)

6. Final provisions

6.1. This manual has been developed based on Professional standard" ", approved by Order of the Ministry of Labor and Social Protection of the Russian Federation dated March 23, 2015 N 185n, taking into account ……… (details of local regulations of the organization)

6.2. The employee is familiarized with this job description upon hiring (before signing the employment contract).

The fact that the employee has familiarized himself with this job description is confirmed by ……… (by signature on the familiarization sheet, which is an integral part of this instruction (in the journal of familiarization with job descriptions); in a copy of the job description kept by the employer; in another way)

6.3. ……… (other final provisions).