How to cover the outside of old lining. Ideas: how to update old lining

Working on the façade of a house always causes a lot of controversy and dilemmas. What is the best way to improve? Which materials are more durable? But such questions do not arise when the facade of the house is covered with clapboard.

The only decision that needs to be made is to choose what to paint the surface with.

What is lining: properties and features

Previously, the lining was only wooden products which were used for sheathing interior spaces And façade elements houses: walls, verandas, balconies, baths.

At the moment, there are several materials from which lining is made:

Plastic panels.
MDF panels.

Wooden panels.

They all differ from each other, and not only price is the main factor of choice, appearance also affects popularity.

Advantageous characteristics of lining

Durability– if you take care of the material, it can last for decades.
Heat and sound insulation– retains heat well and prevents the penetration of extraneous noise into the room.
Aesthetic appearance– looks good in areas where natural materials are used.

Selection of paint and varnish

Now, let’s return to the question of how to paint eurolining on the outside of the house and consider all the existing options for surface treatment.

Covering antiseptics

Protect products from UV rays, microorganisms and high humidity.
Absorbed deeply into the composition of the material.

The downside is that the product is opaque: the wood texture will no longer be visible.

Glazing antiseptics

The transparent composition emphasizes color shade, highlighting the wood texture.
Protects against mold, rot and precipitation.

Note!
Many antiseptics of this type cannot be used for subsequent painting, so be careful before purchasing.
Also, most of them cannot be applied to old paint and varnish.

Oil paints

Penetrates deeply into wood.
Increases resistance to precipitation and moisture penetration into the material.

There are also negative qualities:

Lose color over time. Matting may occur, which will be noticeable in very bright shades.
Takes a long time to dry: about several days. If on the street strong wind and rain, and the facade of the house is not covered, then the painting work process was in vain.

Advice!
Therefore, before painting the lining outside the house, take care to prepare large sheets of film with which you can cover the surface from dirt.

Acrylate paints

They retain color much longer than oil-based ones.
Over time, even with extensive shrinkage, houses do not crack.
They are considered the most environmentally friendly of those materials that exist on the market.
They create a dense film that prevents water from affecting the wood.
Protects the material from mold and mildew.

Alkyd varnishes

The negative point is the dense composition, which does not allow the wood to breathe.

Yacht varnish

Dries in 3 to 5 hours.
Prevents yellowing of wood.
Increases resistance to water and sudden temperature changes.

There is no exact answer to the question of what varnish to paint the lining on the walls and facades of a house, since the choice depends entirely on the wishes and capabilities of the buyer.

Facade preparation

Before painting the lining on the facade of the house, you should carry out several procedures that will have a positive effect on the final result.

All dust and various decorative elements: platband, shutters and others.
All infected and heavily contaminated areas are treated with special solutions to prevent further development microorganisms.
All cracks, seams, joints are sealed building materials.
Dry wet wood: if moisture remains, it will adversely affect the facade of the house over time.

If you decide to apply new paint on the old one, which is undesirable, you can resort to several methods. The three methods described below will help you how to repaint the lining efficiently and for a long time.

Important!
First check the quality of the old paint; if it falls off in places, it is better to remove it everywhere.

Prime the surface. Using a primer solution and drying oil you can achieve good result. Thus, it is easy to level the surface and protect yourself from the appearance of fungal deposits.
Sand the lining so that virtually no old paint remains on its surface.

Degrease the surface with alcohol or a weak solvent, allow to dry and then coat. The simplest method, which is useful for utility rooms: the paint will last 3-4 years.

If you are tormented by the question of how to paint varnished lining, then you can resort to the services special means, however, this is unnecessary cash costs. Therefore, if you have a limited budget, it is better to sand and remove the old finishing material and apply a new one.

Features of facade painting work

The air temperature must be at least 15 degrees, otherwise the protective agents will interact worse with the surface.
Avoid damp places; it is advisable to keep the walls dry. If it rains, the painted part of the facade will be at risk of damage.
Using a roller at . In hard-to-reach places we paint the lining with a brush.

The information described above helps you decide what to paint the lining at the dacha and you can easily choose required material V hardware store. Do not forget that for work outside and inside the premises, you can use both the same type of means and differentiate between them.

This is due to the fact that the funds for interior work the softest and most delicate, and for facade painting they use the most “rough” and “resistant”.

We process the balcony and loggia

A reasonable question arises: how to paint the lining on the loggia so that it is safe for health and at the same time durable and effective?

The most common answer is scuba diving. They perfectly protect wood, maintaining its original appearance. Here are a few options that are popular among the population.

Eurotex

Contains an antiseptic that protects the tree from biological damage.
Prevents color loss when exposed to ultraviolet rays.
Forms a moisture-repellent coating.
The texture of the wood remains visible, while a wide range of colors is also possible in living spaces where there is a wooden surface.

How to beautifully protect lining indoors? Use tinted aqualac.

Belinka

Prevents mold and mildew, even at the stage when the tree is infected.
Increases stability wood materials to moisture and sunlight.
It has a colorless base that emphasizes the natural colors of the lining. The photo shows an example of using Belinka on lining.

Durable: no impact low temperatures and high humidity can last about 10 years.

Now you know not only what you can use to coat façade lining, but also how to paint wooden lining inside a room.

A few final tips:

Be sure to carefully prepare the surface, a lot depends on this.

Use quality brushes and rollers. The tool is important in the work process.

Apply paint in 2-3 thin layers. Such a surface will be more reliable than one thick layer, which will also take several days to dry.

Do not forget how to move the brush and roller correctly: from top to bottom, smoothly, without sudden jerks.

We hope that we have given a detailed answer as to whether it is possible to paint the lining with your own hands.

But if some points remain unanswered, or something seemed unclear to you from the information received, then there is a special video instruction: how to decorate clapboard walls. It tells in detail and shows how and with what to paint the facade and other surfaces.

Wooden lining is a beautiful, natural material. It is not surprising that so many users around the world prefer it as a finishing and facing material.

The environmental friendliness and natural beauty of wood not only decorates the room, but also creates a certain microclimate in it. And the lining covered with a thick coating (paint, varnish) allows you to create any decor.

But the tree has a significant disadvantage that affects performance characteristics lining - it is subject to rotting, various damage, and also tends to darken.

This article is intended for those who want to protect and at the same time preserve the lining in natural form. Let's consider step by step how and what is the best way to coat (impregnate, treat, paint) wooden lining (euro lining).

I must say that the “take a brush, paint and paint” method is good precisely because of its simplicity. But how long will wood painted this way last? Wouldn't it be better to take a more thorough and correct approach?

Proper painting of wooden lining consists of 4 stages:

Stage 1 – preparing the lining for painting

For eurolining, such a stage will be unnecessary, since European manufacturers are guided by a different standard, which provides for the mandatory primary treatment of wood with protective compounds.

Those who bought standard domestically produced lining or are dealing with an already painted surface must first carry out the initial processing of the panels.

Preparation of new lining

Preparation of new lamellas includes:

sorting. It is known that the intersection of varieties up to 10% is allowed. Those. a batch of first grade lining may contain up to 10% of second grade lamellas. In order not to disturb the surface they need to be sorted;

drying. The purchased lamellas must be dry before installation;

keeping in temperature conditions premises. in which it is planned to install the lining. Naturally, there is no point in heating the sauna to keep the boards warm. But the boards need to lie for 2-3 days in the room where they will be installed;

removal of defects. Defects in the surface of the lining include chips, roughness, the appearance of blue, white spots, dead (falling out) knots. On some panels, defects can be left untouched. This is due to the fact that during the work you will need a short lining. For example, for finishing under a window or above a door. However, in order to begin installation on an open surface, the boards must be cleaned of defects by bleaching (for these purposes it is recommended to use SenezhNeo or Frost). Grease stains can be removed by degumming - wiping with a 25% acetone solution. Roughness can be removed using sandpaper or metal brush.

Preparation of used (old) lining

Painting old wooden lining Unfortunately, painting wooden lining is not an action that can be performed once for the entire life of its operation. Painting lining is a process that needs to be repeated periodically.

If you need to paint pre-painted surfaces that have been varnished, you also need to pre-treatment panels.

When to paint the lining:

peeling of the bottom layer of paint;

loss of color of lamellas;

loss of shine of paint or varnish;

the appearance of a significant defect, for example, the ingress of fat, oil, solvent, other dye, the appearance of fungi on the surface of the lining;

new style, thirst for change and fashion. For example, the existing color of the lining does not fit into the updated interior of the house and other factors.

How to clean lining from varnish, paint and dirt

There are two ways to remove old paint or varnish from the lining:

Mechanical. IN in this case, the existing coating is removed using a scraper, a wire brush or a hair dryer and a spatula. To completely remove the paint, you need to treat the boards with a soda solution (100 grams of soda per 1 liter of water). Significant disadvantage method is the likelihood of damage to the lamellas by the scraper. Tip: this method is suitable for cleaning lining from oil paint.

Chemical. It involves the use of various synthetic solutions and compositions (removers, softeners) that promote peeling of paint from the base. It is worth noting that chemical method quite aggressive. You need to work with solutions in a well-ventilated area with necessary means personal protection. After removing the surface layer, the lamellas should be washed with water or rubbed with white spirit.

Advice: if you plan to subsequently coat the wood with transparent varnish, then it is better to give preference mechanical method, since washes can unevenly whiten the lining.

Users note that if the old coating holds tightly, it is enough to just lightly sand the surface (give it a dull finish) and apply a new layer. If the damage is deep, but partial (a knot has fallen out, a mark from an impact, paint peeling), the area should be sanded more thoroughly. If necessary, repair deep defects with putty, apply a layer of paint to this area, and then paint the entire surface finished with clapboard.

Stage 2 – priming the lining

Apply the primer with a brush or spray.

The use of a primer before painting gives wooden lining several undeniable advantages, namely:

improves adhesion, i.e. “adhesion” of the future surface layer of paint/varnish to wood;

protects the tree from swelling;

will fill the pores. This allows the finishing coat to be applied more evenly;

Tip: Some types of wood (such as spruce or individual species pine trees) are capable of releasing resin quite for a long time(up to 10 years). To avoid this effect, the lining can be treated with a special primer that closes the pores of the wood.

allows you to reduce the consumption of decorative varnish or paint.

Types of primers for lining

The varieties depend on the composition of the primer:

Acrylic primers. Provide reliable protection from everything except rotting and protection from rust. More suitable for indoor use.

Alkyd primers. The most diverse and adapted for a specific type of wood. Suitable for both internal and external use.

Polystyrene primers. Suitable only for outdoor use due to high toxicity.

Traditional methods(homemade primers):

Primer with PVA glue. An aqueous solution of PVA glue, popular among users, instead of a primer (dilute in a proportion of 10 drops per 100 ml of water). The solution must be applied twice to avoid the appearance of unprimed areas, which will only appear after complete drying. Among the disadvantages of the method: the appearance of a whitish coating on wooden lining (on untreated wood the whitishness is not visible, but on tinted wood it is very much so), partial hiding of the structure of the wood.

Primer with gelatin. Some users also recommend using food gelatin as a primer. Method of preparation: gelatin is dissolved in cold water(1:2), then heat in a water bath until the granules are completely dissolved. Cool until the mixture thickens a little and cover the lining in 2-3 layers.

Drying oil. A long-known remedy, but it makes the tree sticky and changes its color.

Tip: the primer should not form a film on the surface of the wood.

Among modern chemicals, according to reviews, best primers for lining: Belinka, Tikkurila, Pinotex, Lakra.

Stage 3 – wood protection

Protective means for wooden lining

Purpose protective compounds is to protect the wood from damage. Rot, fungi, bugs, moisture, ultraviolet radiation - all these factors do not add life to wood. And, therefore, protective equipment must always be used, regardless of whether the wooden lining will be further coated with varnish or paint (decoration).

Methods and means of protecting wood:

Antiseptics. Chemical compositions, which have an antifungal effect. Their purpose is to protect the lining from the biological activity of various bugs and fungi.

Advice. Treatment with an antiseptic must be carried out before assembling (installation, installation) of the lining. This is due to the fact that the grooves, ridges and the reverse side of the wooden lining also need to be processed.

Fire retardants. Compositions based on aqueous solutions of salts, which are designed to protect wood from fire. It should be noted that decorative products should also increase the fire resistance of wood.

The specificity of protective agents is that they penetrate deeply into the wood structure and become invisible when dry. Application of protective agents is so important stage in protecting the lining, that manufacturers of eurolining apply them at the stage of preparation for sale. Along with the humidity level and type of lining, protection is what distinguishes regular lining from eurolining.

Advice. It is better to prime the lining on both sides. Special attention need to be given to the ends of the lamellas. This is due to the fact that the end part will not be painted after installation.

Stage 4 – coating for lining (paint, varnish)

Coating for lining The choice of decorative finishing coating (paint/varnish) must be approached responsibly.

What is preferable: varnish or paint for wooden lining? And if paint, then what paint is better for lining?

First, you need to decide where the work will be carried out (inside/outside), what effect should be achieved, what is the quality of the surface to be painted, what are the requirements for timing, cost, etc.

Choosing what to cover the lining with - types of paint and varnish for coloring and impregnating wood

1. Paint (opaque enamel) for lining

Oil paint

Oil paint for lining Practice has shown that paint on oil based serves for a long time and reliably protects the wood from moisture. It dries quickly and changes color slowly. The paint has a specific smell that quickly disappears. Update this decorative coating on the lining it will not be difficult.

Oil paint is renewed every 5-6 years. This is necessary to give the paint shine and eliminate microcracks through which moisture can damage the lining.

Advice. After drying, the surface of the lining is painted oil paint, it will become a little lighter. Therefore, initially it is worth choosing a darker shade.

Acrylic or acrylate paint

Acrylic paint for lining It is characterized by its absence of odors and high drying speed. The use of this paint does not limit the working time. The paint can be applied at low temperatures.

The surface of the lining, painted with acrylate paint, will not need updating for a long time. The only drawback of the paint is the high price.

2. Stain (impregnation or decorative glaze)

Stain for lining Essentially this is the same primer, but it only gives the wood of the lining a different color or shade. Using stain for lining is inexpensive, but effective way emphasize the structure of the tree.

Note. The stain is suitable for wood surfaces without defects.

3. Varnish for lining

It is classified as a transparent coating, which makes it an indispensable topcoat when it is necessary to preserve the natural structure of wood.

Acrylic aqualac for lining

Acrylic aqualac for lining. Environmentally friendly, quick-drying varnish. Aqualak can be diluted with water. It is used for painting wooden lining from the outside and inside.

Advice: Aqualak is suitable even if there is an allergy sufferer living in the house.

Alkyd varnish for lining

Alkyd aqualac for lining Creates a film on the surface of painted panels. The varnish takes a long time to dry.

The use of alkyd varnish is justified in rooms with high humidity (kitchen) or where there is increased wear of the lining (corridor).

Material prepared for the website www.moydomik.net

Tip: Absolute strength and resistance to UV radiation is the coating of the lining yacht varnish(yacht).

4. Oil-wax (or wax paints)

Oil-wax for lining Natural linseed oil-wax is a new product on the market of coatings for wooden lining.

During the process of treating lining with wax, the oil penetrates deep into the structure of the wood, and the wax gives the wood a beautiful appearance.

5. Liquid plastic

Liquid plastic for lining Completely deprives wood of its ability to micro-ventilate, but gives the wood a futuristic look. More often used to cover part of the surface of the lining, as a decorative design element.

Tips for choosing a finishing coating for wooden lining

color. Since stain or paint changes the color or shade of the lining, you need to use this property. So, for example, light shades visually increase the space. The use of different colors/shades allows you to zone the room;

compound. The prefix “bio” after the name of the varnish indicates the absence harmful substances. This composition can be used for interior work;

manufacturer. Many domestic analogues of lining varnish or paint can create worthy competition for foreign goods. At the same time, the price of the product will be more humane.

How and with what to paint the lining in the bathhouse and steam room

Wax composition Evrotex-Sauna for lining in a bathhouse Due to the high temperature, it is better not to paint the lining in a bathhouse, but to treat it with protective compounds.

An excellent solution would be to use wax compounds, for example, Evrotex-Sauna. This coating is suitable for use in conditions high temperature and cyclic intensive hydration.

Advice. You only need to apply the varnish once in the sauna. In the dressing room - you can make several layers.

How and with what to paint the lining on the veranda

The veranda or terrace is exposed to the greatest influence of atmospheric factors, so the material must be resistant. First coat with a layer of primer, and then 2-3 layers of varnish or paint.

How and with what to paint the lining inside/outside the house

There are no particular differences in painting a house outside or inside. The only difference is in the coatings used. Varnish/paint for interior work must meet environmentally friendly requirements. For outdoor work, it is more important that the coating can withstand moisture, temperature changes, and exposure to UV rays. The same type of paint can be used inside and outside a building. The difference is in the number of layers applied.

How to paint lining correctly - tool

To paint the lining you can use:

brush. They are convenient because they allow you to paint wood in corners and hard-to-reach places. The paint is applied most evenly with a brush;

Advice. To apply the paint with a brush evenly and avoid smudges, you need to immerse the brush halfway in the paint.

roller Allows you to paint quickly. However, to obtain a uniform layer you need to paint several times;

spray. Allows you to get the job done as quickly as possible. But it increases paint consumption;

mitten (chain-shaped). It is convenient to use a glove to paint (impregnate) the places where the lining joins (frames) the pipes;

foam sponge.

Wood paneling painting technology

Before painting or applying varnish/paint, they must be mixed well. This way they will lie more evenly;

a test paint will allow you to understand what the painted surface will look like;

It is better to apply paint several times thin layers. This way, each layer will dry faster and the coating will be applied more evenly;

the next layer of paint/varnish should be applied only after the first one has completely dried;

When painting the lining with paint, you need to leave gaps of 2-3 cm at the top and bottom of the panels. This will allow the tree to breathe. And the gaps themselves can be closed with decorative plinths;

to avoid obtaining different shades of wood, it is better to paint with paint at a time, using material from one batch;

if there is a need to interrupt work, try to make sure that the “seam”, the border of the painted and unpainted area, is not in a visible place;

Tips for storing an open can of paint.

If work is interrupted for a long time, then in order to prevent a film from appearing on the surface of the paint, you can put cardboard impregnated with drying oil on the surface.

If a film appears, its particles may fall on the surface to be painted. In this case, it is better to cover the surface with foam rubber and dip the brush through it.

a more saturated color/shade can be obtained if you apply the paint several times (up to 4). Further increasing the number of layers will have no effect;

Do not allow paint/varnish to dry too quickly. This may cause the painted layer to crack. Professionals do not recommend applying paint/varnish when exposed to direct sun rays.

Having understood the nuances of processing, impregnation and painting of wooden lining, you can create beautiful surface, and most importantly ensure its long-term operation.

Few people would think of arguing that wood is one of the best building materials due to its naturalness. The wooden surface naturally regulates the humidity in the room, and when correct installation designs.

Wood has low thermal conductivity and many other positive qualities, which is why wooden eurolining is used as a finishing material enjoys stable popularity. Panels made of lining are easily attached; under them you can hide defects in the surface of the walls, and remove various wires out of sight. Painting clapboard walls is also not particularly difficult. With the help of lining it is ensured increased sound insulation. But, despite the fact that wood is quite durable, it still ages and is subject to all sorts of misfortunes, the main ones of which are high humidity and exposure to ultraviolet radiation. “Attacks” of water provoke the formation of rot, mold and mildew, and from the sun the wood begins to dry out and crack. That's why wooden surfaces require mandatory protection, that is, painting the lining is not a whim, but an urgent necessity. So, let's paint everything.

How to paint the outside of the lining?

Usually the outside of the house is lined with clapboard coniferous species. This is explained by the fact that the natural antiseptic, the resin secreted by wood, provides good protection against moisture and fungus, which cannot be said about hardwood. But, nevertheless, the question of how to paint the lining on the outside of the building is not removed from the agenda. From all kinds of atmospheric influences, resin is not very good protection. Paint for lining, impregnation, varnish - special processing is simply necessary.

First of all, before painting the lining, the surface should, of course, be very well cleaned. This can be done with a hair brush or steel brush. If the wood has darkened over time or is in some places affected by fungus, then it needs to be treated using special wood treatments.

After cleaning the surface, before painting the lining, it must be primed. The last step in painting wooden clapboards on the outside of a building will be to apply (with a spray gun or brush) two layers of topcoat paint. You can use pearlescent or translucent ones, you can also use oil and acrylate dyes or varnishes. All work must be carried out at ambient humidity of no more than 80%, while the air temperature must be above zero and not less than +5°C.

A fairly important undertaking is painting the lining inside the house. Wooden panels on internal surfaces can be made from both hardwood and coniferous trees. Pine looks especially beautiful and, of course, it is undesirable to fill its texture with ordinary opaque paints. Therefore, the question of how to paint the lining inside the house can be answered - the best option would be, which will give even greater depth to the wood pattern and emphasize the sophistication of natural natural material. Acrylate varnishes can be used as a coating for wooden eurolining.

Balconies and loggias, made according to conventional designs, were open to all winds and had no protection. But the inventive population began to improve their living conditions by glazing the “apartment” areas. Accordingly, having insulated a balcony or loggia, they must be sheathed to improve the aesthetics of the appearance. And wooden lining in this case is not only an economical, but also a very attractive option from the point of view of the beauty of the natural material and its functionality. Pine lining is most often in demand. Again, painting it is necessary to protect the surface, but how to paint the lining on a balcony or loggia so as not to spoil the appearance of the finish? Scuba diving will also come to the rescue here. In this case, coating the lining with varnish is one of the best options, and wooden floors can be coated with varnish.

How to paint the lining on the veranda?

Very often to residential building attach glass veranda. It is not heated, but in the summer season it is an excellent vacation spot for all household members. Typically, verandas are finished with wooden lining, so that it has an attractive appearance and is protected from external influences; you need to choose the right way to paint the lining on the veranda. Painting of lining on walls, ceilings and floors can be done with urethane-alkyd-based varnishes or. They will withstand temperature changes quite well.

How to paint the lining on the terrace?

A terrace, unlike a veranda, is an outdoor area that fits organically into the overall architectural solution country house. There are two types of terraces - summer open or equipped with a roof supported by pillars. The ceilings of covered terraces are often finished with wooden paneling, as are the pillars. How to paint the lining on the terrace? Since this is an open space, the principle of painting the lining is the same as outside buildings.

First, the surface should be put in order, that is, thoroughly cleaned using a steel or hair brush. If the wood has darkened over time or is in some places affected by fungus, then it must be bleached using special bleaches for wood. The last stage of painting wooden lining on the terrace will be the application (with a spray gun, roller or brush) of two layers of topcoat paint. You can use pearlescent paint-glaze or translucent glazing antiseptics, you can also use oil and acrylate dyes. All work must be carried out at ambient humidity of no more than 80%, while the air temperature must be above zero - at least 5°C.

There are quite a lot of horizontal wooden surfaces on the terrace that are subject to wear, so in addition to painting the lining, attention should be paid to a reliable coating for fences, floors, railings, tables and benches. To prevent rapid aging of wood, it is recommended to treat them with anti-slip oils or.

How to paint the lining in the gazebo?

A gazebo is somewhat reminiscent of a terrace, but unlike it, it is not an extension to the house, but is located separately, usually in the garden of a cottage, country house or simply in a country house. The shape of the gazebo can be any, as well as the material from which it is built, but often the owners still prefer wooden gazebos or covered with wooden paneling. How to paint the lining in the gazebo so that it lasts as long as possible? After all, open air and atmospheric hazards do not at all contribute to the preservation of untreated wood.

The last stage of painting the wooden lining on the gazebo will be the application (with a spray gun or brush) of two layers of topcoat paint. You can use pearlescent paint-glaze or translucent glazing antiseptics, you can also use oil and acrylate dyes. All work must be carried out at ambient humidity of no more than 80%, and the air temperature must be positive - at least 5°C.

How to paint the lining in a bathhouse or sauna?

In a sauna or bathhouse there is constantly high humidity, so the wooden lining, which is usually used to cover the walls, must be especially well protected. For the construction of wooden surfaces in these health “washing” establishments, you should not choose coniferous wood, since it has high thermal conductivity and intensively releases resin when heated. That's why best option- This is a wooden lining made of aspen, alder or linden. Linden is still preferable; this tree has medicinal properties and smells good, which is important in the process of relaxation while taking bath procedures. To protect the lining in a bath or sauna, they have been developed that have a natural base and therefore do not have a harmful effect on the body.

When starting facade work or renovating a house, a dilemma arises when choosing a facing material. The most durable material will be plastic lining.

Before painting it, the question arises not only about color scheme, but also about which paint is most suitable for painting polyvinyl chloride material.

Until recently, lining was made of wood and was used primarily for interior finishing work. The walls of the rooms, veranda, balcony, bathhouse and sauna were covered.

At this time, the material for making lining is more diverse:

plastic,
MDF (pressed fine wood chips),
tree.

They differ appearance, quality, parameters and, accordingly, price. Not the least role in the preference for one or another lining is played by its appearance.

ADVANTAGE CHARACTERISTICS OF THE LINING

Durability– appropriate care will ensure service for many years.
Heat and sound insulation– maintains the indoor microclimate due to good heat and sound insulation
Aesthetic appearance– the flat, smooth, evenly colored surface of the lining fits perfectly in appearance with other finishing materials.

SELECTION OF PAINT

The quality of surface treatment depends on the choice of the appropriate paint and varnish material. Several paint and varnish materials are used to paint lining.

COVERING ANTISEPTICS

Provide protection from UV rays, high humidity, and microorganisms.
They impregnate the material well.

Disadvantage: due to the opacity of the coating, the wood texture is not visible.

GLASSING ANTISEPTICS

Transparent after drying. Due to this, the richer texture of the wood is emphasized and revealed.
Protects against moisture, prevents the formation of mold and rot.

Warning! Do not apply over old paint or varnish. There is also no provision for subsequent painting. Please read the directions carefully before purchasing or using.

OIL PAINTS

Impregnate wood with high quality.
Water resistant.

Negative qualities

They lose brightness and color over time, and the coating becomes cloudy.
Drying time from one to several days. If moisture gets in during drying, it will ruin all the work.

Advice! With external finishing works prepare the required footage in advance polyethylene film to cover the surface while drying from rain or dust in strong winds.

ACRYLIC PAINTS

They do not fade over time.
They do not cause cracks on the surface due to deformation during shrinkage of the house.
In terms of parameters, they are the most environmentally friendly paints and varnishes offered on the market.
The density of the coating prevents contact of wood with water.
Prevents the appearance of mold and mildew.

ALKYD VARNISHES

A very dense coating, due to which the wood does not “breathe”.

YACHT VARNISH

Complete drying time is 3–5 hours.

The wood underneath does not turn yellow.

Increases the moisture resistance of the painted material, and also protects against mold and fungi.

Listed above paint and varnish materials and their main properties. The main parameters, composition, colors, and instructions for use are on the labels and accompanying catalogs. The final choice is always up to the buyer.

FAÇADE PREPARATION

Paints and varnishes for long-term service are applied to an appropriately prepared surface. Before painting you must:

clean the surface from dust and dirt, remove all protruding decorative elements,
treat the wood with a degreasing, antiseptic solution, having previously cleaned all heavily soiled and contaminated areas,
seal all cracks, seams and joints with sealant,
make sure that the wood is well dried, since even a small amount of remaining moisture will make itself felt in the future.

When painting the lining for the first time, these procedures are sufficient. If you are going to paint a previously painted one, you will have to prepare it accordingly.

Attention! Before starting work, you need to check how the old paint adheres to the surface. If it peels off in places, it is advisable to remove it from the entire surface.

Clean the paneling from old paint and sand it with sandpaper.
Prime the surface using drying oil or a primer solution.

Degrease the surface with alcohol or a weak solvent. Dry and varnish. This, in fact, is the simplest method, suitable for work in utility rooms. It is necessary to repaint after 3-4 years.

Before painting pre-varnished lining, you can remove it using special solvents, which in itself is not very cheap. Or you can sand it with sandpaper, remove dust and apply a new coating.

FEATURES OF FACADE PAINTING WORKS

The optimal temperature for the paint to spread evenly on the surface and maintain the required consistency should be above 15 degrees.
Make sure that the surface to be painted is thoroughly dried, otherwise the paint will begin to peel away from the lining over time.
Joints of seams, irregularities, paint with a brush. It is impossible to properly apply paint in such places using a roller.

It’s not difficult to choose the appropriate paint and paint the lining yourself. You just need to take into account that different means are used for external and internal work.

WE PROCESS BALCONY AND LOGGIA

When painting lining on a balcony, it is necessary to take into account that the air temperature in summer time will be above 20 degrees, and direct sunlight will result in even greater heating of the painted surface. What paint is the safest in this case?

For such purposes there are safe scuba diving, which perfectly protect the wood, preserving its pattern. Here are some of the most commonly used ones.

EUROTEX

The composition includes an antiseptic that provides protection against microorganisms.
Protects against UV rays, thereby maintaining color for a long time.
Has moisture-repellent properties.
Doesn't overshadow the wood grain. A wide range of colors allows you to easily change the color of the walls on the balcony, as well as wooden surfaces in residential premises, by painting the lining.

In order for the wooden lining to look beautiful indoors, aqualak is used.

BELINKA

Using the above mentioned products, you can coat and paint the lining indoors.

If you need any additional information, you can get it from the video instructions, which detail and show the entire process of painting lining.

Wooden lining is an excellent material for finishing the facade of a building. This is an environmentally friendly raw material that will make external view the house will be aesthetically pleasing and will decorate the exterior.

To protect wood from negative impact The lining should be treated with antiseptics and paints and varnishes.

How to treat lining outside the house

Facade paints

There are many varieties of paints. To treat the lining outside the house, use acrylic paints on water based. It is harmless and does not release toxins. The composition provides an elastic and dense coating and protects from precipitation and resists temperature changes.

Stains and varnishes

Can be used together or separately.
Wood stain - simple and accessible remedy, which is suitable for protecting wood from mold, mildew and pests.
They are impregnated with varnish to create various shades and decorative elements and protect against the sun, moisture and insects.

Oils and wax

This natural remedies, which are absolutely safe. Oils are absorbed into the wood and reliably protect it from the effects of negative phenomena. Wax-based products cover the surface and create a translucent matte shine.

Glazing and matte antiseptics

They will impregnate the lining to a depth of several millimeters and protect the wood from rotting, precipitation and ultraviolet radiation. Antiseptics are applied before the main painting.

Impregnations

Special impregnations will protect the wooden paneling from mold, moisture, bacteria, fires and insects. To thoroughly impregnate the exterior of the paneling, use a primer.
Modern paints and varnishes already include impregnations, but they can also be used separately.

How to paint facade lining

Before covering the lining outside the house, it is necessary to prepare the facade. Remove dust and dirt from the lining, remove decorative elements (shutters, trim, etc.). Seal and treat cracks, seams and joints. Dry the wood.

To recoat old clapboard outside your home, first remove the old coat of paint. If the lining turns black on the street, also remove old surface. To do this, apply special solution and leave for a while according to the instructions. Then remove the old paint using sandpaper and a sander.

Saturate the surface of the lining with an antiseptic. Drying oil and soil will level the surface and protect the wood from the appearance of fungus and insects. Sand the surface and treat with alcohol or a weak solvent.

Wait until the surface is dry and apply paint in two or three layers. To avoid smudges and bumps, cover the lining with paint only after each layer has dried.

To paint the clapboard outside the house, use a roller. Hard to reach places, impregnate the recesses and joints with a brush. If you use a spray gun, you won't need a brush.

Paint façade lining better with a spray gun low pressure. It creates a minimal fog effect and reduces paint loss. To work on a stepladder, choose a compact one electric spray gun. It saves time and is convenient to carry.

Please note that the temperature outside when painting should be above 15 degrees Celsius. In the cold, the interaction of the lining and protective equipment worsens. After the paint has dried, apply varnish.

Linden and pine lining is the best material for the facade of a house

The Drev-Market company offers to buy linden and pine lining at the manufacturer's price. Linden and pine lining is perfect for interior and exterior finishing houses, bathhouses, terraces or gazebos.

Lining made of linden and pine is easy to process and install. Paints and varnishes will easily fall on the surface. You will get the color you want.

Linden tolerates temperature changes and high humidity, while pine is resistant to precipitation. These are environmentally friendly materials that retain heat for a long time.

We produce our own lumber in Yoshkar-Ola (Mari El). The wood of this region is distinguished by its strength, stability and beautiful relief. Own production allows you to carefully control the quality of products and sell the lining at a low price.

The presence of a warehouse in Moscow will make delivery throughout the capital and Moscow region efficient. We will deliver goods to regions of Russia.