How to make a sofa from foam rubber. Making sofas with upholstery with your own hands

It's nice to enjoy the warmth and comfort of home while sitting on a soft sofa, especially if it is made by yourself. Although the range of furniture offered by furniture stores is huge, sometimes situations arise in which you need to make this attribute yourself.

Which sofa to choose

When you have the desire and opportunity, you can try your hand at making furniture. To begin with, it is recommended that you familiarize yourself in detail with the information on how to make a sofa with your own hands and think through everything down to the smallest detail. It is necessary to decide on the design of future furniture, as well as for what room it is needed: for the kitchen or living room, bedroom or nursery. It is important to determine where it will be located - near a wall, a window or in the middle of the room.

To develop the necessary skills in making furniture for the first time, you can design an ottoman of a simple shape, without any shelves or drawers. Even if you have little knowledge carpentry profession, then you can mount corner sofa with your own hands, a master class on the production of which is described in this article.

Preparation

Designing a sofa is labor-intensive and quite hard work, you need to prepare for it in advance. Before starting this process, in which you will make a sofa with your own hands, drawings of the future furniture accessory must be developed and designed on paper. You need to think about the dimensions of the product, the thickness of the upholstery, decide what the tilt of the back will be, etc. It is also important to take into account the tolerances of the material when cutting it. To make the diagram clear, you first need to figure out what is included in the most ordinary sofa:

frame;
back;
sitting;
legs;
sidewalls, railings or armrests.

The better the drawing is made, the easier it will be to make the sofa. A clearly thought-out diagram will help with the purchase required quantity building material and will save your time.

The advantages of making a sofa yourself

Anyone who has at least basic knowledge in this field can design furniture. Before making a sofa with your own hands, it is recommended to make sure that the advantages of this process are obvious:

A sofa made by yourself will cost several times less than buying a new one.
There is no need to worry about what the ottoman was made from. When creating furniture yourself, the craftsman will carefully select the main and consumable materials: high-quality and dried timber, foam rubber, durable upholstery.
The shape and dimensions of a homemade bed are selected taking into account the dimensions of the room for which it will be assembled. Consider various sofas, photos of which are posted in catalogs furniture stores, and choose the most suitable option- the task is more pleasant than difficult. After all, the range of different shapes and colors is very large, and you can choose the right sofa for every taste.
The upholstery of a homemade sofa is easy to change yourself, unlike a ready-made one.

Construction material for making a sofa

Since making a sofa with your own hands is difficult, but quite feasible, you should prepare the material and tools for installation. Indicative list of components for making a sofa:

Wooden beam with a section of 30 x 30 mm.
Chipboard - 16 mm, chipboard - 3-5 mm. Choosing this material, you need to make sure that you have a certificate, since low-quality products have a negative impact on human health.
Birch plywood 5 and 15 mm.
Nails, screws.
Certified foam rubber 20 and 40 mm.
Sintepon or batting.
Foam rubber crumbs or any other eco-friendly material for stuffing sofa cushions.
Upholstery fabric.

It is worth approaching the choice of building material for making a sofa with all seriousness, Special attention You need to pay attention to the quality and environmental friendliness of fabrics. It is recommended to buy everything you need in specialized stores, where certification documentation will be provided.

Necessary tool

An approximate set of tools needed to make a corner sofa with your own hands without the involvement of professionals:

An electric drill with a speed regulator.
Power saw or jigsaw.
Furniture stapler.
Knife for cutting material.
Sewing machine.

Making a sofa frame

The basis of any furniture is the frame; the materials for the sofa structure are boards, slats and bars. Their choice depends on the size and features of the future ottoman, as well as the maximum possible load on this product. It is important to design correctly future design, especially since a corner sofa will be manufactured with my own hands. From the quality of execution this stage The level of deflection, deformation and other possible inconveniences depends.

Using self-tapping screws, boards or slats are assembled into a frame, and the corners of the base are reinforced using bars. A fiberboard sheet is used as the bottom of the sofa. To secure it, several slats are cut into the base of the sofa, onto which the fiberboard is nailed the right size. With these manipulations you can avoid sagging of the bottom.

Assembling the back and seat

The back of the future sofa should be strong and durable, since it serves not only for beauty, but also so that you can lean on it. This also applies to the seat, because it must withstand certain weight and, accordingly, bear a considerable load. To make the main components of the sofa you will also need boards. They are used to assemble a box equal to the size of the base of the sofa. Metal corners firmly connect all load-bearing parts of the seat and backrest. The latter is covered on both sides with fiberboard sheets. The outer part of the backrest is covered or covered with foam rubber (then padding polyester or batting) to ensure softness and elasticity, because no one likes to sit on a hard base. The final stage when a homemade sofa is made, but not the least important, is the upholstery. It is made using decorative fabric, leather or other materials. The upholstery of the back and seat is done using a hardware gun or a furniture stapler. Very often, these works cause some difficulties for home craftsmen. In such cases, specialized organizations come to the rescue; you just need to indicate the required dimensions of the future sofa and Consumables.

Legs are screwed from below to the base of the ottoman, which can be made from wooden beam. To ensure reliable connections, they are secured to metal corners.

Sofa sides

Now the question of how to make a sofa with your own hands becomes clear, especially since there is very little work left - making the sides or armrests. They are usually made from chipboard or constructed from boards and battens, which are then covered with plywood. To add softness, the sides are finished with foam rubber or padding polyester, and finally with upholstery material.

Few people know how to properly make furniture with their own hands, but if you have a strong desire, anyone can do it. The main thing is to set a goal for yourself: to make a unique and original item that no one has, let it be a sofa. Simple instructions installation will help you create the desired furniture attribute quickly, efficiently and without overpayments. A homemade sofa will not only amaze family and friends with its unique appearance, but will also please the creator’s vanity.

Sofas that can transform into a full-fledged double bed are gradually replacing standard beds from apartments, especially small ones. After all, they are more compact.

An important factor is the wide selection of finished products that can fit into any interior and decorate it. They have standard sizes and have at a high price, so sometimes there is a need to make a custom sofa bed with your own hands.

What is a sofa bed

The sofa bed is a symbiosis of two separate pieces of furniture. When folded, it functions as a comfortable sofa for relaxing. After the transformation there is a transformation into a comfortable sleeping area, which can be easily used by two people.

The shape of sofa beds can be corner, straight, round, modular. Thanks to the installation of a folding mechanism in the sofa, the furniture is transformed into a double bed.

Device and dimensions

All sofas come off the assembly line in standard sizes:

permissible length – 120-190 cm;
width – 55-70 cm;
armrest height – 10-40 cm;
back height – 20-70 cm;
seat height – 40-45 cm.

Before you start making a sofa with your own hands, you need to study in detail the structure of numerous types of this product, which is directly related to the folding mechanism:

The book is represented by metal corner plates that connect the seat, back and armrests. They have been familiar to everyone for many years. The sofa-book unfolds by lowering the backrest from a vertical position to a horizontal one. It is necessarily equipped with a linen drawer and requires some wall space for transformation. For this reason, the product is placed with a slight indentation or moved back a little before turning it into a bed.
Click-clack is a kind of book, but instead of soft upholstery, the base is metal frame and slats. The mechanism received its name because of the characteristic sound that is heard during unfolding. The advantage of the design is the additional moving armrests, which are lowered and extend the berth. When folded, click-clack takes much longer less space than a book. In addition, the backrest can be fixed in a “half-sitting” position.
The accordion is transformed by pushing the seat forward, which, in turn, pulls the folded backrest behind it. When folded, such a sofa takes up little space, and after unfolding it triples in size. The accordion mechanism is durable and reliable. Manufacturers often supplement models with removable covers.

Meralat, or French folding bed, - compact sofa. The sleeping area is hidden inside it under a seat attached to one segment. Folding occurs by lifting the seat from the back and turning it forward, supported by steel legs. One segment attached to the back of the seat pulls the others, and the sofa can increase 3 times. There are models in which the seat is made up of cushions and folds out after removing them.
Sofas with a berth located under the seat. They are pulled forward through a roll-out mechanism. Then the segment rises up and the backrest lowers to a horizontal position.

When choosing any type of sofa for home production, you must first purchase a transformation mechanism and study the drawings for its installation and use.

How to make a sofa bed

Before you start producing a piece of furniture with a hidden sleeping place at home, you need to measure the available area for its installation and determine the maximum width of the sofa. Based on the data obtained, they develop detailed drawing products with assembly diagrams of component elements.

To understand how to make a sofa bed, consider the process of making a book.

Based on standard sizes, purchase:

boards 190x20 cm long - 2 pcs., 80x20 cm - 2 pcs., 80x50 cm - 2 pcs., 100x50 cm - 12 pcs.;
timber 5x5 and 6x4 cm;
sheet of fiberboard, plywood or chipboard;
wooden or metal legs (if provided for in the drawing);
filler (foam rubber, spring blocks);
fabric sheet for upholstery and lining of the frame and armrests;
book mechanism;

In addition, you need to prepare a measuring tool, pencil, scissors, screwdriver, electric jigsaw or hand saw, fasteners.

Frame assembly

It is necessary to begin production by assembling the linen drawer. To do this, fold a rectangle of 2 long and 2 short boards. Strengthen the corners of the structure with 4 bars 20x5x5 cm, placing them on the outside and moving the short side boards 5 cm inward. Additionally, 2 slats are installed across the box. The bottom of the box is sewn up with a sheet of fiberboard or plywood.

At the same stage you need to paste over outer part drawer with padding polyester and upholstered with fabric. For this, a long canvas is used, equal to the perimeter of the entire box, width – 30 cm.

The next step is to make the back and seat yourself. According to the diagram, they have the same size 189x65 cm. For production, a 6x4 cm beam is used, in which it is recommended in advance milling machine make grooves for the slats. Fastening can be done without grooves, directly on top of the timber.

Seat cover

The fabric covering of the seat follows the same pattern as the backrests. The slats are covered with foam rubber and covered with fabric. To form a flat bed after unfolding, the thickness of the filler must be the same in both parts.

In the places where the transformation mechanism will be located, the fabric is not nailed down, but left to hang freely.

Back upholstery

To create the soft part, foam rubber with a thickness of at least 6 cm will be used. The thicker the filler, the softer the upholstery will be. Since the lamellas are located in the center of the back, pre-cut foam sheets are glued along the perimeter directly to the beam. In order to avoid problems with installing the folding mechanism in the future, 5x10 cm pieces are immediately cut out in the corners in those places where the back and seat will be connected.

Then on flat surface lay a piece of fabric that is 25-30 cm larger than the backrest. Place the workpiece down on it with foam rubber. Along the perimeter of the entire product, the fabric is carefully wrapped and slightly stretched to avoid wrinkles. Fastening is done using a construction stapler.

Hinge installation and assembly

The next stage of production is the installation of the “book” mechanism. The back and seat are placed side by side, maintaining a gap of 10 mm between them. You can insert something to prevent the parts from moving towards each other. Then apply it in the corners metal device. TO wooden frame the mechanism is secured with self-tapping screws.

To install the top of the sofa, you need to pre-drill holes in the center of the side walls of the linen drawer. After placing the backrest and seat in the right place, you need to connect them with the bolts included in the kit. The holes in the mechanism and the boards must match.

Armrests

To make armrests, first assemble a frame from timber. Then a blank cut from fiberboard or plywood is screwed to it with self-tapping screws. The upper part of the part is softened with felt and foam rubber. A padding polyester is glued over the entire surface and covered with fabric.

When the armrests are completely ready, they are screwed to the bars that were previously installed in the corners of the linen drawer.

What do you do with old furniture?

Modern designers are coming up with more and more unusual sofa designs, and manufacturers are no less actively implementing them. The market is filled with models of all shapes, colors and sizes. But here’s the problem: among all the variety, it’s not so easy to find a simple and comfortable sofa that satisfies your own sense of beauty.

Why not take a different approach and try to make your dream sofa with your own hands? After all, this is not nearly as difficult as it seems at first glance.

How to understand what kind of sofa you need?

If you decide to make a sofa with your own hands, it means that the store-bought ones do not suit you in some way. When designing a new interior, do not forget about other important points.

How and where will you use it? Do you need a sofa that can comfortably accommodate a large group, a sofa for sleeping, or both? For example, no matter how much you like the idea of upholstering it in leather, it's not the best choice for a sleeping place. Some types of upholstery will quickly become unusable if you have pets.

What size sofa do you need? Take careful measurements to be sure that these are the optimal parameters. Check whether it will not interfere and fits into the allotted space.

Where exactly are you going to put it? Sofas for the balcony, kitchen and living room have their own requirements for size and design.

Finally, decide on the mechanisms. If you plan to use a new thing instead of a double bed, you should make a folding sofa. Despite the existence of more advanced mechanisms, the “book” does not lose popularity. The principle of its operation is simple: we raise the seat, the back reclines - the sofa unfolds.

When deciding on the design and upholstery material, it would be useful to take into account general interior premises. When assembling a sofa yourself, you are free to choose absolutely any fabric, but how will green flock with a blue flower look in a minimalist room in black and white?

Photos of hand-made sofas will help you decide on the nuances of choosing them. They will also give you an idea of what a homemade sofa might look like.

Before starting work, you should get a general understanding of the designs of sofas and their features. Let's look at the main ones.

If you need a sofa for sleeping, choose a straight model. This is the most common form and comes in many variations on the market.

A corner sofa will fill a corner and become an effective addition to the interior. Such a sofa would be suitable, for example, in the kitchen.

Modular sofa – good decision for a studio apartment. It is a set of modules that can be combined in any order or used separately.

Selection of materials

The body material is usually wood. No special skills are required to work with it; it is durable and environmentally friendly. You can use linden, walnut, birch, but pine is not the best choice, as it requires factory processing.

Plywood is durable and reliable material, cheap and environmentally friendly. Perfect for creating any furniture with your own hands.

MDF and chipboard are very popular among furniture manufacturers. Keep in mind that they are cheap, but short-lived.

Do not limit your imagination: the materials can be the most unusual items: pallets (pallets) left over from construction, or cardboard boxes.

Upholstery fabric must be purchased with a margin that takes into account the thickness of the parts. A few points to note:

velor, being soft and pleasant to the touch, gets dirty quickly and is not suitable for pet owners;
chenille is an excellent choice for a nursery due to its practicality;
flock with fine pile is pleasant to the touch, but quickly gets dirty and will be erased in a few years;
jacquard is practical, but not very pleasant to the touch;
matting is a rough and durable fabric. Not suitable for cat owners;
The leather looks solid, but expensive.

The choice of color and pattern is entirely a matter of your tastes, but try to choose colors that are in harmony with the interior.

As a rule, foam rubber (density 35 kg/m3 or more) is used as a filler for a homemade sofa. This is a cheap but short-lived material - after a few years it will have to be replaced. You need at least two layers for the seat, but one may be enough for the backrest.

To securely fix the filling and upholstery and prevent them from creasing and sliding, you need to cover the base with an additional layer of non-woven fabric. The soft layer can be attached with Velcro.

Tools

Ruler, tape measure, square, pencil and others for drawing.
Jigsaw, hacksaw for cutting parts.
Furniture stapler for attaching upholstery fabric.
Glue for foam rubber.
Drill or screwdriver.
Nails, nuts, metal corners, additional fittings.

Progress

On the Internet you can find many instructions on how to make a sofa with your own hands. Let's supplement them with a few tips. It all starts with drawing a drawing of a sofa. This should not be neglected, since the drawing contains important information about the size, number of parts and their exact location. You need to have a clear idea of what you want to get.

The frame consists of a base, back, armrests and legs. Additionally, mechanisms and boxes are installed. The base is a frame made of timber, reinforced with lamellas. You need at least 32 of them. It is recommended to make the legs up to 10 cm high. Be sure to use durable wood. Strength can be added with metal corners.

Frame parts are assembled in next order: back, front panel, seat, armrests. Then the base is mounted on the frame. The drawers are assembled, the retractable part, mechanisms, and wheels are installed. All surfaces are carefully sanded and treated with stain, furniture wax or colored glaze.

Parts are cut out of foam rubber and attached to the frame. Using a furniture stapler, the upholstery fabric is attached.

Sofa made of pallets - unusual and original solution, at the same time extremely simple and worth a penny.

Pallets are sanded, primed and painted. Two beams are attached to the resulting base using corners. They have an oblique cut on top, on which a piece of plywood or MDF, pre-treated in the same way, rests at a slight angle. This part becomes the back.

The legs are attached to the body. All connections are reinforced with metal corners. Then a layer of filler is laid, and the upholstery is done using a stapler. You can easily make a corner sofa using this method.

A cardboard sofa will require a lot of boxes and glue, but this non-standard solution Creative people will love it.

Cut from boxes required amount details that look like a sofa in profile. You also need to cut out small rectangles, several times larger than the number of profile parts.

Using glue, for example, PVA, the profile parts are glued together, alternating with rectangles. They need to be glued to the places of greatest load: the seat and back. The resulting sandwich must be pressed down with a press and left until the glue dries completely. The resulting structure is pasted over with another layer of paper, a layer of foam rubber is attached and upholstered.

Thus, you can assemble a modular sofa from several cardboard chairs.

Agree, each of you has at least once thought about how to make a folding one. After all, perhaps, there is not a single apartment or house in which there is no soft sofa. When you come home, especially after work, you really want to either sit or lie down on your cozy sofa. Only fashion changes every time, and with it furniture design. And you can create an original folding sofa with your own hands.

You can make a comfortable and original folding sofa with your own hands, having free time and necessary materials.

Production and purchase of materials

It will take up your free time, but it will also bring benefits. Firstly, you will save money on this sofa, since today the cost of store-bought copies is quite high. Secondly, you will select high-quality consumables and be confident in them. Thirdly, you can change at any time appearance sofa, changing the upholstery. Fourthly, you will save space in your apartment, since the product will be assembled during the day, and in the evening it can be turned into a sleeping place. And most importantly, you will feel proud of your work and show it off to your family and friends.

Before you start making a folding sofa with your own hands, you must decide on the size and type of product. There are three main types: sofa-book, roll-out sofa, folding sofa. And also don’t forget to draw a drawing of it. You will need it not only during the work process, but also in order to correctly calculate the consumption required material. Having decided on all this, you can proceed to the next step.

To, namely, a folding sofa, you need to purchase the following materials:

boards (5 cm thick and 15 cm high);
corners;
bars;
springs;
fabric for covering;
thick foam rubber;
transparent varnish;
hinges for doors;
furniture panels;
jigsaw

Having bought everything, you can start working on the sofa itself. The instructions will help you with this.

Return to contents

Making a folding sofa

The back of the sofa is made from furniture board.

Let's start working on the back of the sofa. It is made from furniture board. Mark the top curly line on it a little earlier. To do this, take a template. Next you must drill a diamond-shaped slot and top line backrests according to the drawing. You will need a jigsaw for this. To get a diamond-shaped opening, you need to pre-cut holes for the jigsaw. Then drill holes near obtuse angles rhombus Do not turn the jigsaw in sharp corners.

After completing this work, remove the sawdust from the edges. After cutting out the remaining parts of the furniture panel, all elements need to be sanded. Be sure to carefully reinforce them by pressing them against the board of the workbench. Using a profile router, you must round off the front parts of the sofa parts. If you wish, then ready-made elements coat with varnish.

Then attach the main block of wood to the wall. You determine the size and height according to your preferences. The height you determine will be equal to the height of the side parts of the seats. Attach the beam in the middle horizontally, fix it at the edges with screws. Place a wooden strip on it, on top of which fasten the seats on hinges, thanks to which the sofa will fold out. Next, this rail should be attached at the bottom to the block with self-tapping screws. The holes for them are made initially.

The sofa unfolds and folds thanks to special hinges.

After this, you must mark the locations of the hinges for the side seats, they will fold inward. Holes for dowels are drilled according to the mark, and the hinges are fixed with screws. When the hinges are installed, the sides are attached to them. Now install the back of the sofa using double-sided self-adhesive tape. You can add foam rubber to the back in a case. It looks both beautiful and comfortable. The homemade sofa is ready. The only downside is that there is no additional linen drawer.

Return to contents

The principle of making a sofa book

There is another way. But first, get everything you need:

boards;
bars;
slats;
bolts;
transformation mechanism;
interlining;
foam rubber, synthetic winterizer;
sofa covers (you can sew them yourself);
wooden fittings (for armrests);
sandpaper.

Majority folding sofas equipped with a box for linen.

Get started by assembling your laundry drawer. Make a box with dimensions of 190x80 cm. To make the structure stronger, attach two transverse slats in the middle. Make the bottom of the box from fiberboard sheet. The seat and back will consist of two identical boxes made of bars (40x60). Nail the slats on them so that they hold the mattress.

Make the armrests from chipboard (24 mm). They need to make frames. Drill holes at the bottom for the bolts. In the linen drawer you also make 2 holes on both sides. Attach the transformation mechanism on both sides so that there is a 10 mm free space between the backrest and seat frames. Make sure that the seat does not extend beyond the armrests when the product is folded.

All roughness on the frames can be treated with sandpaper. Attach non-woven fabric and thick foam rubber to the slats. You don’t cover the transformation mechanism with it. You can cover the foam rubber on top with synthetic padding so that it does not wear out. Place sewn covers on the seat and backrest.

Glue foam rubber, twisted in the shape of a roller, onto the armrests, and you will need to attach more of it on top to thicken and soften the armrests. Cover the armrests with the same fabric from which you sewed the covers for the sofa itself. Attach the fittings to the front side. Don't forget to check whether the transformation mechanism works by unfolding and folding the sofa book. Well, the sofa with your own hands is ready. Here the operating principle of the sofa is simple and reliable. But there is also a minus: such a sofa cannot be placed close to the wall, since when unfolded it will constantly rub against the wall.

Do you have a small apartment? Then try making a corner sofa with your own hands. Step-by-step instructions and drawings will help you make simple and compact furniture. Corner sofas will succinctly fit into the design of the kitchen, children's room or living room.

How to make a corner sofa with your own hands

To produce a sofa, a drawing is made calculating the number of parts and their sizes. Materials must be taken without frills. Materials with complex connections are quite difficult to install yourself. For fastening the best option self-tapping screws are considered. Also, when connecting some elements, special glue is required. Before gluing the surfaces, level them well.

The wooden surface is covered with stain or varnished in several layers. The sawn small parts are sanded with fine-grained sandpaper. This surface becomes stronger and more durable.

Materials for making a corner sofa

Pine timber with a section of 3 by 5 centimeters;
Chipboard 1.6 centimeters thick;
Fiberboard 0.3 centimeters thick;
Plywood having a thickness of 1.5 centimeters and 0.5 centimeters;
Foam rubber 2 and 4 centimeters thick;
Batting, fabric (thick) for upholstery;
Holofiber or padding polyester;
Furniture legs in the amount of 9 pieces. You will also need a microlift (lifting mechanism).

To make a sofa you need:

Jigsaw
Hacksaw and miter box,
Furniture stapler with staples
Screwdriver
Hammer
Self-tapping screws and bolts
Wood glue
Sewing machine

Step-by-step instructions for making a sofa

Step 1. If you are planning to make a sofa for yourself, then when you buy chipboard, provide drawings and ask them to cut the boards according to the specified dimensions..

Step 2. Then all the parts need to be marked and laid out in accordance with the markings.

Step 3. The frame, seats, armrests, backrest must be in the order of assembly. The parts are twisted, starting with large ones and ending with small ones.

Step 4. Two identical sidewalls are prepared and horizontal bars and vertical racks. They are secured with ties. This turned out to be the frame of the left side.

Step 5.For the left side, the base is assembled, that is, the frame for the seat. It is inserted into the frame, and a plywood sheet is fixed on top. A sheet of fiberboard is attached to the back.

Step 6. Then the assembly of the other (right) side of the sofa begins; this part includes a drawer for linen. Longitudinal and transverse bars are attached to the sides.

Step 7 The bottom of the frame is sewn up with a plywood sheet. The backrest is attached and the chipboard sheet is screwed on. The sides are sheathed with blanks. The back is sewn up chipboard sheet. Holes for the microlift are made with a puncher. Bolts are taken for fastening grade 6 by 30 with special heads for furniture.

Step 8. The frame parts are filled with foam rubber. The foam rubber must match the size of the part being filled. To do this, a measurement and a template are made, and blanks are made from it. The part is glued to the surface. The seat has foam rubber 10 centimeters thick.

Step 9. To cover a sofa, first make patterns and cut out blanks from the fabric. To make work easier, you can lay the fabric on the seat and use a bar of soap or chalk to mark the edges. The material is cut using outside. Allowances are 1-2 centimeters on all sides. Recesses in the upholstery, that is, drawstrings with or without sewn buttons, make the sofa more impressive.

Step 10. Places for pulling loops are pre-drilled in the slabs. For tightening, a loop is made, which is sewn to the upholstery. The loops are made from strong nylon cord.

For less abrasion, agrotextiles are laid under the upholstery on foam rubber. The upholstery material is secured with staples using a stapler. When everything is upholstered, the elements are combined into one structure.

We invite you to look at the drawings of the corner sofa:

With the correct cutting of materials and assembling everything together, you get a comfortable, beautiful and inexpensive corner sofa. It can serve for many years and the quality will be no worse than the factory one. Now you can make not only repairs with your own hands, but also high-quality and beautiful furniture.