Thanks to many advantages, as well as a wealth of colors and textures, liquid wallpaper has gained wide popularity among the range of finishing materials. The composition of such wallpaper is based on cellulose fibers, silk threads, cotton and decorative elements that define general form. Glitter and mother-of-pearl make this type of finish unique, unlike other canvases.
Types of material
View liquid wallpaper determined by the material of which they are composed:
- Silk - they contain a large amount of silk fibers. This finish can be applied to concrete and drywall. They are sold in the form of a powder or a liquefied mixture.
- Cotton - the use of 100% natural cotton with mica, adhesive and decorative additives. They look voluminous and soft to the touch.
- Cellulose - this finish includes wood fibers. They have a unique composition that allows them to be used for decorating walls in poorly heated rooms. The production of cellulose material is ideal for surfaces with microcracks.
Advantages and disadvantages of the material
Liquid wallpaper like the other finishing material, have disadvantages and advantages. Among the positive properties it is worth noting the following:
- palette of colors and textures : Using this material you can create different applications;
- the ability to restore damaged areas;
- thermal insulation properties: due to the fibrous structure, the material retains heat better than its analogues;
- antistatic composition: this factor does not allow dust to accumulate on the relief structure. To carry out wet cleaning, it is recommended to varnish the wallpaper;
- durability: service life is more than 20 years. The material does not fade and does not lose color;
- absence of seams: due to the technology of applying a homogeneous layer, the material is free from the appearance of joints and seams;
- sound absorption effect: considering the ability textile fiber to elasticity, any mechanical vibrations are absorbed.
Tip: To restore the layer, moisten the defect area with water, remove the material using a spatula and apply a new layer of wallpaper.
Among the properties negative character The following disadvantages are noted:
- poor moisture resistance;
- long drying;
- high price.
Tip: For gluing in places where condensation may accumulate, after applying the material, coat it with varnish on the acrylic base or primer. But it won’t be easy to remove them from the wall in the future.
Surface preparation
Before finishing the walls or ceiling with such raw materials, the surface must be cleaned of the old layer of paper and plaster. Significant disadvantages on the walls should be treated with putty. Liquid wallpaper adheres best to a rough structure, which allows the composition to be applied to a surface that has not been sanded after puttying. If liquid wallpaper will be applied to concrete or wooden wall, you need to prime it.
Tip: You can create a soil solution yourself by adding sifted chalk or sand to the finished solution.
Primer selection
A primer is applied to the surface to increase adhesion. What kind of primer is needed:
- Acrylic – helps increase moisture resistance and evens out the surface. Acrylic primer does not emit odor, prolongs the service life of the coating. The composition of the solution has antifungal properties.
- Deep impregnation primer - the active substances of the composition penetrate into the wall pores, thereby bonding and impregnating the surface.
- Betonokontakt primer is intended for treating dense concrete walls. After application, it acquires a roughness that promotes strong adhesion of the material.
- Finishing – is the final processing agent before applying the finishing material. Find suitable options You can go to a hardware store.
Preparation of finishing composition
Liquid wallpaper is produced in two versions, which contain instructions for use:
- Dry. The powder is diluted warm water, then it is applied to the surface.
- The liquid composition is the most acceptable option, ready for immediate application.
How to use the first type of composition? The purchased powder is mixed with water (7-8 l), after which it should sit for an hour if the mixture is coarse-grained. If the type of finish purchased is without large fractions, half an hour of exposure is sufficient. During downtime, the composition should be stirred periodically.
Tip: The liquid for preparing the powder should be distilled, and the temperature for mixing by hand should be at room temperature - 20-30 C.
Knead several packs at once liquid finishing only possible in cases where mixtures are from different batches, in order to avoid color mismatches.
Application of material
After preparing the main composition, you can proceed to its application. Spatulas will help different sizes. The spatula should be held at an angle to the wall so that the mixture is distributed from under the tool, directed in the direction of the movements being carried out. If the mixture is light, then on the dark concrete wall the invoice will not have saturated color due to possible translucency.
Tip: Varieties of liquid finishes have different fibrous structures: they can be applied as thin layer 2-3 mm, or have a layer of 5 mm. The larger the layer, the more prominent the structure.
Liquid wallpaper can be applied by spraying or spraying. For the first application method, you will need one package of the mixture per 5 square meters. m. It is recommended to purchase a mixture of such finishing with a reserve, based on the smoothing process, where gaps are possible.
The spraying process is considered fast and mass consumption is minimal. The main thing in this method- ability to use a spray device and adherence to the proportions of applying the layer. The created layer does not need to be pressed. The texture should remain loose. It is necessary to work without pressing the spatula, since the relief will not work out, and the consumption of the composition will increase significantly.
Tip: To squeeze out a pattern on liquid wallpaper, you should first draw the intended pattern with a simple pencil. Using a rubber spatula, fill the contour with a mixture 2-3 mm thick.
Applying another design will require about 4 hours of exposure. For a uniform design, all color layers should be applied in the same direction. To avoid the formation of joints and seams after completion of the work, the material is applied completely, starting from corner to corner, without interruption. It takes a day or two for the surface to dry under natural conditions, after which the room should be ventilated.
Paint for liquid wallpaper
If you decide to wallpaper the walls with liquid wallpaper in a room with high humidity or instability temperature regime, can be used water-based paint for liquid wallpaper. This is due to low moisture-resistant properties. In such cases, painting the wallpaper is necessary not only as an additional addition of shine, but also as a protective agent against deformation.
Is it possible to add color to the paint base for liquid wallpaper? If you need to add some color to your interior, what color should you choose? To paint the surface you should take a color white or several other options, then mix until the desired shade is obtained. The tinting is selected to be of the same brand as the source material, preferably from the same manufacturer.
What's better?
What is better to choose - liquid wallpaper or decorative plaster? This issue should be resolved before the repair process, based on technological factors and cost.
Liquid wallpaper is a wonderful material that is not inferior to plaster in its numerous advantages, despite its strength. The advantage of this finish over plastering is easy application and the ability to replace the damaged area with a new layer. Such restoration is impossible with decorative plaster. The application of such wallpaper will help smooth out uneven walls, add softness and diversify the interior with a wealth of shades. And just as liquid wallpaper looks like on the wall, not a single finishing material looks like it.
Finishing with liquid wallpaper does not accumulate odors of smoke and food and has a long service life. Decorative plaster has important advantage– strength. It is better to choose plaster; it is the most durable compared to liquid texture, and with proper grinding it makes the surface mirror-like.
Selection of material and rules for caring for it
To know how to choose this type of finish, you need to follow the rules:
- The composition must be of the same structure.
- You should pay attention to the degree of moisture resistance.
- Drying time, depending on the type and manufacturer, is 12-72 hours.
To facilitate the care of this material, after the first application it is necessary to cover it with a layer of varnish or water-based emulsion. Possessing practical properties, such wallpaper can be easily removed and just as easily applied with a new layer. In areas of increased contamination, it is possible to use colorless varnish.
Tip: In order for the finish to regain its original color, you need to clean its surface with a washing vacuum cleaner. Minor stains can be easily removed with a school eraser. Caring for wallpaper does not involve washing, so as not to blur the relief.
Liquid wallpaper on given time recognized as the best finishing material in the decoration process various rooms. The pros and cons of the finish, which determine its main characteristics, will help you verify this.
Until recently, liquid wallpaper was far from the most popular on the market. building materials, and they preferred ordinary roll wallpaper. Now they have begun to be used more and more often, which is explained by their advantages and original appearance. It is worth mentioning right away that liquid wallpaper can only be called wallpaper with a stretch, since in terms of the method of application they tend more towards plasters.
The composition of liquid wallpaper may include substances such as cellulose fibers, silk, cotton, as well as adhesives, possibly fungicides of natural origin, and, of course, decorative components that set the color of the finished surface, and perhaps its shine, mother-of-pearl and etc.
Advantages and disadvantages of liquid wallpaper
The increasing popularity of liquid wallpaper is due to its advantages over conventional wallpaper. So, The main advantages can be considered:
Based on all these descriptions, it may seem that liquid wallpaper is an ideal material that has no shortcomings, but this is not the case:
Liquid wallpaper application technology
Tools and materials
In order to cope with the application of liquid wallpaper, you will need a small set of tools and materials.
Materials:
Tools:
- deep containers for preparing liquid wallpaper with a volume of at least 7-8 liters for each package;
- plexiglass spatula or of stainless steel with a smooth surface for applying liquid wallpaper;
- a spatula can be replaced with a trowel or a gun for applying liquid wallpaper;
- for applying primer;
- a wide and narrow spatula for wall putty, as well as a mixer for preparing the putty itself;
- a pencil to apply a design to the wall if you plan to make a whole pattern or picture from liquid wallpaper.
Surface preparation
If the advantages of liquid wallpaper, in your opinion, outweigh the disadvantages, and you decide to decorate similar ways your room, then it is worth considering some nuances. So, although such wallpaper can hide some defects, but not all, so the remains old paint protruding from the walls metal elements There is no way to hide liquid wallpaper and other unevenness, so before applying it you will need to properly prepare the surface.
Before applying liquid wallpaper to the wall, check it for compliance with certain conditions. So, it must be durable, i.e. not have any layers that could later fall off, such as old paint or plaster. It should not allow any color to pass through the layer of wallpaper, so metal elements are either eliminated altogether or covered with special compounds so that they do not corrode. The surface should not absorb moisture, so priming it will not hurt.
Before applying liquid wallpaper, the surface must be freed from traces of previous coating: old wallpaper, paint, plaster, so that after a while all this does not fall off along with a fresh layer of finishing. If there are large cracks on the wall, then it is advisable to putty them: this can also be done when applying liquid wallpaper itself, but then the consumption of not the cheapest material will increase, so it is better to use regular putty. Some experts recommend puttingty not only cracks and, for example, seams between sheets of drywall, but the entire surface. 
To add strength to the wall surface, it is better prime: This also prevents moisture from penetrating inside. It is better to use and apply in 2-3 layers, while the popular primer Ceresit CT17 is not very suitable, since over time it can manifest itself in the form yellow spots on the wallpaper. The primer should be either colorless or white.
If there is on the surface metal elements, such as nails, corners or fittings, they can also form yellowish-rust stains over time, so it is better to cover them with oil or latex paint to limit contact and reaction of the metal with water. After priming, it is better to apply another layer of putty.
It is worth noting that liquid wallpaper works best on a slightly rough surface, so it can be applied immediately to putty or unsanded plaster, but if the base is smooth wood or wood, then it is better to apply a primer with quartz dust. You can make such a primer yourself by adding fine sand, sifted through a flour sieve, to the usual one. As a result, the liquid wallpaper will be applied evenly and will not drag on the spatula, as might be the case if the surface is perfectly smooth.
Preparation of liquid wallpaper
In principle, the process of preparing the composition of liquid wallpaper will be indicated in the instructions for each package of contents, but it is still useful to indicate some nuances in order to accurately calculate the time. 
So, you need to start preparing liquid wallpaper in advance, approximately 6-12 hours before application, so you can start at the surface priming stage. So, the composition of liquid wallpaper includes a base made of cellulose or silk, dye and glue - all this can be already mixed, or sold in separate packages. In the second case, you will need to mix everything thoroughly in a large container: you need to mix without clumping, but as if fluffing it up. If all kinds of dyes and glitter are not included in the finished mixture, then they better first mix with water, and then add the base: this will help to evenly distribute both the color and glitter over the entire surface. Those wallpapers that are purchased already mixed can also be fluffed up so that there are no lumps - this is not necessary, but it is partly a guarantee that they will be applied more evenly. 
You will find the details of preparing your specific wallpaper in the instructions, for example, amount of water, which needs to be added. It is worth noting only a few points: for example, it is better to pour required quantity water, and only then add the mixture, although it is possible reverse order. In this case, it is better to prepare the mixture specifically from one package in one container: a combination of several packages, or vice versa, using only part of it is not allowed if you want to get a uniform layer with the same color. Therefore, the mixtures are prepared in different containers, combining them in finished form.
You can simply mix the mixture with water with your hands - there is nothing harmful or caustic in there. Although the instructions for some wallpaper indicate a tool such as using a mixer attachment, in some cases this method can simply break the long fibers, and as a result the appearance will turn out to be a little different from what it was supposed to be. 
When the mixture is ready, leave it infuse for 6-12 hours– depending on the manufacturer’s requirements. This is necessary so that the glue completely softens and binds well the remaining components of the mixture. After this, you can mix all the prepared wallpaper in one container: you need to calculate so that given quantity enough for either the whole room or at least one wall. Wallpaper from different batches may have slightly different shades, and the transition on one wall may be slightly noticeable, but if it is applied to different walls in the room, then discover different shade will be almost impossible.
Separately deserves attention liquid wallpaper consumption. Typically, manufacturers indicate that one kilogram of mixture is enough for 5-6 m², but in fact, it is better to calculate the consumption of 1 kg of mixture per 3-4 m². Ready solution Wallpaper can last quite a long time without losing its properties, but you still shouldn’t delay applying it to the walls.
Application of liquid wallpaper
In order to apply prepared liquid wallpaper, you can use one of the following tools: trowel, spatula, spray bottle or grater. Moreover, graters can be used both regular and special for liquid wallpaper. The latter are often made of transparent plastic, making it easy to control the process of applying the material, especially when appliqués are made. 
Myself The application process is quite simple: very similar to puttying, only a little easier. You can scoop up a portion of the mixture either with your hands or with a spatula, and apply it to the wall or the tool that is being used. Then the wallpaper is rubbed over the wall in an even layer of 2-3 mm - the thickness may vary depending on the manufacturer. They begin to apply wallpaper in a separate island, and the next portions are added to it. A problem may arise that the solution does not adhere well to the wall or is too thick. In this case, a small amount of water can solve the problem.
It is better to hold the grater with which the wallpaper is applied at an angle of 5-15 degrees, and the direction of movement to achieve a spectacular appearance It’s better to choose different ones, incl. slightly curling. When approximately 1 m2 of coating has been applied, you can smooth it out a little with the same float, only dipped in water. temperature not lower than 10ºС and a well-ventilated room.
In order for such wallpaper to dry completely, it usually takes 1-3 days. Then, if desired, they can be coated with varnish for additional protection from negative environmental factors. Liquid wallpaper in the bathroom or kitchen is usually coated with varnish, and only vapor-permeable varnish should be used, although for these rooms it is better to immediately choose moisture-resistant liquid wallpaper.
Caring for liquid wallpaper
At correct operation liquid wallpaper can serve for at least 10 years. So, in order to keep them clean, just go with a vacuum cleaner. If you varnished the wallpaper, then you can use a slightly damp sponge.
If in some area a visible defect has formed, then the wallpaper can be soaked with water and carefully removed with a spatula, then prime the wall 2-3 times and apply the liquid wallpaper again. Therefore, it is always worth buying the original mixture with a reserve. And if, after applying the base layer, there is unused wallpaper, then there is no need to throw it away - when wet, it can be stored for about two weeks, and during this time, after the base layer has dried, correction may be necessary. Otherwise, the leftovers can be spread out, dried, and then just added water until the mixture is ready to be reapplied.
It will surprise no one that various new products appear on the building materials market all the time. This happened with the finishing material, which was called liquid wallpaper. And although it is impossible to talk about wallpaper in its classic form in this case, the cellulose included in the mixture determined this name. But the word “liquid” accurately defines its state, because the dry mixture is simply diluted with water and then applied to the surfaces to be finished. This process is so simple that even women who are far from construction and finishing operations can easily cope with their goal.
But the most interesting thing is that liquid wallpaper is a variety in terms of decorative design walls We won’t talk about it here, just consider all the advantages and disadvantages of this material in order.
Advantages and disadvantages of liquid wallpaper
Let's start with the advantages.
Attention! When combining types of liquid wallpaper, it is necessary to make marks on the wall that will delimit the areas of application.
Disadvantages of liquid wallpaper.
- The biggest disadvantage is the high price compared to traditional wallpaper. And although today the effect of the novelty of the finish has worn off, so the price is falling, it is not yet possible to say that the prices of the two types will be equal. In addition, a beginner who is trying to apply liquid wallpaper to walls or ceilings for the first time will have to spend a little money. After all, you will still have to spoil one or two packages.
- It is believed that liquid wallpaper has decent moisture resistance. This is not to say that this characteristic is decent. In any case, do not confuse them with washable wallpaper. These are completely different and opposite positions. Manufacturers recommend that liquid wallpaper should not be wet cleaned at all. And if for some reason a section of the wall becomes dirty or stained, then there is only one way to fix it. It is necessary to remove the dirty area with a knife and spatula and apply fresh material.
The last minus should probably be included not only in the “disadvantages” section, but also in the “advantages” section. It is clear that such in a simple way Repairing traditional wallpaper simply won't work.
Calculation of the required material
To understand the topic - liquid wallpaper: pros and cons - and not touch upon the method of calculating this finishing material would be a gross omission. The whole point is that it is a correctly carried out calculation that makes it possible to determine the price component of the process itself. Therefore, it is worth dwelling a little on this position.
In principle, the manufacturer already gives exact recommendations, which he indicates in the instructions for use. It says that one package of liquid wallpaper can cover five square meters surfaces. At first glance, the packaging is small in size, but there are two criteria:
- The dry mixture is diluted with six liters of water, which increases the volume of the solution.
- The finishing material is applied in a thin layer, so the savings are obvious. True, a beginner will have to bring his experience to mastery, because it will be difficult to achieve a uniform layer the first time.
In addition, it should be noted that liquid wallpaper has a very important and unique quality. After application, the material begins to self-level as it dries. Of course, large differences cannot level out on their own, but small ones become invisible. And this is another plus in the “dignity” category.
Pros and cons of preparation
The preparatory stage is an important component of the entire finishing process. Because the quality of the final result will mainly depend on it.
Liquid wallpaper is a material containing decorative fiber components, reminiscent of decorative plaster, pleasant to the touch. Such coatings are environmentally safe for health, functional and fit well into modern interiors. They have a fairly simple composition, and anyone can prepare it themselves.
Description and characteristics
Among the features are the following:
- saving time when finishing the room;
- level the walls a little;
- they can be reused;
- with proper use they are durable.
Liquid wallpaper has the following characteristics:
- antistatic properties;
- repel dust;
- resistant to fading;
- environmentally friendly;
- thermal insulation;
- soundproofing;
- aesthetic appearance.
Look at the photo to see what liquid wallpaper looks like in the interior.
Advantages
Using liquid wallpaper you can produce partial renovation, to do this, just clean a piece of the surface from the old ones and apply to this place new line-up. The advantage is that you don’t have to select a pattern, since there are no seams when covering walls with liquid wallpaper. The description of the benefits looks like this:
You should not use this wallpaper on the walls of a room with high humidity, or in an apartment with pets. If the area is damaged, it will be difficult to choose the same shade for the patch, so it is better to have Additional materials.
Compound
You can make liquid wallpaper with your own hands. The composition usually includes:
Components for liquid wallpaper can be sold separately or in finished form. Such mixtures are made at the manufacturing plant. The finished mixtures should be fluffed before gluing so that there are no sticky lumps in the mixture.
There are several options for making liquid wallpaper with your own hands at home. For the first, you will need to buy ordinary cotton wool at the pharmacy, which should be carefully chopped with scissors. To achieve desired color, use any fabric dye. Plain paper is also used to make wallpaper.
Then add wool, cellulose or synthetic threads to the liquid wallpaper; you can buy several skeins of different colors and cut them into pieces.
Bustilate glue, which has high moisture resistance, acts as a binding agent. Need to buy at a haberdashery store decorative elements: sparkles, beads and others. Choose dyes of different colors in the store; with their help you can create interesting effects on the walls: transitions and stains. Unlike ready-made mixtures, a hand-selected composition allows you to create wallpaper that is unique in texture and color.
How to make it yourself
To prepare liquid wallpaper, it will take about 6-12 hours; you need to start preparing the composition at the stage of priming the walls.
You can include paper in liquid wallpaper. To do this you will need:
How to knead correctly
At the time of buying ready mixture There is always a description of the cooking process. For all types it is almost the same:
How to properly make liquid wallpaper with your own hands, watch the video:
Gluing technology
The following tools are used for gluing liquid wallpaper: a trowel, a grater, a spatula, a gun and a spray bottle.
DIY application sequence:
How to properly hang liquid wallpaper with your own hands is shown in the video:
Tips for independent work with liquid wallpaper:
Liquid wallpaper is functional, environmentally friendly, pleasant to the touch, easy to install and maintain, suitable for different rooms and styles. They are most often used in the corridor, due to their resistance to dirt. Choose yourself high-quality composition It won’t be difficult, the main thing is to follow the proportions and maintain the cooking time. Take into account our advice on gluing coating technology and create competent interiors!
An excellent alternative to classic paper wallpaper is modern finishing in the form of liquid wallpaper. They are increasingly gaining popularity thanks to their positive characteristics, simple care, immediate repair of some damaged parts.
Description and features of liquid wallpaper
Opinion about liquid wallpaper divided. Some call them a mixture in which they combine paper wallpaper with the properties of plaster. Others consider them finishing plaster. One thing is clear that liquid wallpaper of a different texture has its own requirements when applied to the surface.
They can only be used for interior decoration. While paper wallpaper looks original in the bedroom, living room, hallway, children's room, it is undesirable for the kitchen and bathroom. This is due to excessive humidity and a high risk of contamination.
Decorative coating resembles stone, felt and is used for walls and ceilings. On photo liquid wallpaper You can consider how you can play with the density and colors of the material.
The material looks original with the addition of glitter in the bedroom and living room. In the evening and in the sun they cause a gentle shimmer. A wall highlighted in a different color, for example, at the head of the bed, opposite upholstered furniture, gives a special charm. You can play with the heterogeneity of the texture.
Additives in the form of flock and granules create a three-dimensional picture when it is necessary to visually expand the room. The second option could be right choice liquid wallpaper colors.
Bright hues will visually increase the space in a small room. Each color comes with warm or cool undertones. The northern part will be softened by warm tones, the southern part by cool tones.
The children's room is designed to use liquid wallpaper. The main thing is that they are safe for health, do not collect dust, and the flight of imagination is endless here. Children love to draw on the walls.
When designing, you need to attract them. Perhaps they want to build their own Magic world, parents will only help to enliven the children's room with drawings, sparkles, and decorative elements.
Having a dry mixture in stock, you can always wet the surface, remove the old layer and apply a new one. The room will always look neat and cozy thanks to the texture of the wallpaper.
The photo shows liquid wallpaper in the interior. The combination of several shades on the balcony makes it stylish and unique.
Long corridor divided into zones, visually reduces space.
Types of liquid wallpaper
Liquid wallpaper according to its composition is divided into three groups: silk, cotton, cellulose.
Silk liquid wallpaper. The main component is silk thread. Its content varies from 50 to 100%. The mixture is sold in powder or liquid form and belongs to the premium class.
The application surface can be concrete or plasterboard. Proper preparation walls before use and adherence to technology will allow the material to serve long time without losing properties or original appearance. The interior with silk pile looks stylish and luxurious.
Cotton liquid wallpaper. Cotton is used as the basis for liquid wallpaper. His component 99%, only 1% additives in the form of mica and binding component. An interior with such material creates a warm atmosphere and comfort. In the price segment it is in second place after silk.
Cellulose liquid wallpaper.A budget option is cellulose liquid wallpaper, where the main component is wood processing products. The material has demonstrated itself well when decorating non-residential, cold rooms. It is ideal for surfaces with microcracks.
Wallpaper can be of two types according to consistency:
- liquid;
- powder.
The first type is perfect for beginners when the products are ready to eat.The second version of wallpaper is diluted with water and infused for several hours.
Both types are applied with a plastic spatula or using a spray gun.The structure of the wallpaper can be smooth or embossed. If we talk about consumption, then in the second case it will be higher.
Pros and cons of liquid wallpaper
List of advantages over traditional wallpaper:
- environmental friendliness. Not allocated harmful substances, therefore suitable for people suffering from allergic reactions;
- ease of use. It doesn't take much space to lay them out like roll copies;
- resistance to temperature changes, feel good in rooms without heating, for example, in country houses;
- do not burn out from sun rays;
— have heat and sound insulation;
— easy to apply to the surface and dismantle;
- hide construction defects;
— provide a seamless surface;
— no waste;
- not susceptible to mold or mildew. Since the composition contains fungicides;
— do not absorb foreign odors;
- you can implement any design ideas;
— the ability to play with shades;
— stable deformations;
- have antiseptic properties;
— do not accumulate moisture and do not create a greenhouse effect;
- finishing properties. After starting putty Apply a layer of liquid wallpaper 1-1.5 mm thick.
Flaws:
- high price;
— do not use in damp rooms (bathroom, shower);
- exclude wet cleaning, only a vacuum cleaner, a dry cloth;
— are erased upon contact with other objects;
How to apply liquid wallpaper
Before you start work, you should decide consumption of liquid wallpaper. Each company writes instructions on the packaging. It is enough to calculate the area and multiply it by the size proposed on the pack.
If the consumption on the packaging is written at 4-5 sq. m. With an area of 20 sq. m, you need to purchase 5 packages. It is worth considering how the wallpaper will be applied. The consumption of a spatula or roller is higher than that of a spray gun. With the second option, the consumption of 1 pack will already be 6-7 square meters. m.
Before how to apply liquid wallpaper, you need to prepare the walls:
- clean from residues of wallpaper, paint, plaster, greasy stains;
- level the walls with putty. It is desirable that the liquid wallpaper be applied in an even layer;
- walk on a primer deep penetration 2-3 times;
- according to the instructions, soak the dry mixture and let it swell until it swells. Mix the mixture by hand. The mixer may damage the structure. One batch should be enough for an entire wall. Before use, mix the mixture again;
- Using a plastic float, apply the solution from top to bottom, starting from the corner. For better gliding on the surface, moisten the grater with water;
- dry the wallpaper for two days. To do this, you can open the doors and create a draft. Do not be afraid that stains will appear during the drying process. The reason lies in uneven drying;
- for application liquid wallpaper pattern a template is being prepared;
- first the outline of the drawing is plastered;
- after the contour has dried, the template is removed and a mixture of a different color is applied. Stick along the outline masking tape;
— the clarity of the contours is made with a marker after complete drying.
In order for the drawing to fit harmoniously into the design of the room, you must adhere to some requirements. Drawings are good to apply to open spaces with minimum quantity furniture.
Combine different kinds finishing when working with a pattern is not advisable, only liquid wallpaper various colors. If you need to make a three-dimensional drawing, then do not press too hard with a spatula and level the canvas.
Pictures in bright, contrasting colors look good in large rooms. With a minimum area, choose calm tones with discreet patterns. Drawing with vertical stripes visually raises the ceiling in the room, horizontal ones expand the space.
IN classic style stick to laconic designs with contrasting or calm tones. Antique style requires additions in the form of sparkles and inclusions. Drawings in the kitchen should be varnished to protect them from dirt.
