How to kill fungus in the bathroom. How and how to get rid of mold in the bathroom in tile joints: effective methods for removing superficially and deeply

06/08/2017 0 4,615 views

Not everyone knows how to get rid of mold in the bathroom at home, but it needs to be done. Mold in the bathroom not only brings aesthetic discomfort, but can also have a detrimental effect on the health of the household, especially if there are children in the family.

Mold is a fungus that multiplies very quickly in conditions high humidity. Poor room ventilation contributes to the growth of mold. It can appear on the bathroom itself, walls, sink, floor. You can cope with this problem, the main thing is to know what tools you can use.

Methods to combat mold in the bathroom

Mold is a black fungus that spreads easily indoors. Its main danger is that it can cause a respiratory tract infection if it enters the lungs. People suffering from asthma are especially susceptible to various complications that can be caused by mold.

Removing fungus completely from a bathtub is quite a difficult task; it will require complex measures and, possibly, the use of several antifungal agents. Small particles are found at the seams of the tiles, so this area of the walls should be given special attention. Special attention. If you follow all the recommendations below, you can deal with mold in the bathroom forever.

Installing or improving ventilation

So, you have come close to the issue of eliminating mold from the bathroom, then you should understand that simply cleaning alone will not work. Mold is a very caustic fungus that penetrates into various cracks and crevices; it can only be removed with an integrated approach, when the fungus is hit from different directions.

The first and very important step is to ensure good ventilation in the room. This is what becomes main reason mold formation. The bathroom is always very humid, and if the room remains in this condition for a long time and the ambient temperature is within certain limits, namely above 20 degrees, then the chances of fungus forming are almost 100 percent.

A steam room forms in the room, which is an excellent environment for mold growth.

If there is no ventilation in the bathroom at all, then you will not be able to get rid of mold forever; first you need to ensure the possibility of air circulation.

If there is ventilation in the room, but it is not functioning, then it needs to be cleaned; perhaps it has become clogged with dust and dirt over time and now cannot fully perform its function.

Plumbing Troubleshooting

Once ventilation is in place, it’s time to move on to the next step in mold control. Despite the fact that the bath is a room where there is always a lot of water and moisture, keeping it dry is very important. So, if a faucet is leaking, it needs to be repaired or replaced with a new one. Water leaks will cause increased humidity, that is, mold will return again and again.

If there is a washing machine in the room, it is very important that there is no water left in it anywhere, as it also becomes a breeding ground for the spread of mold. Dry the headband thoroughly after each wash. washing machine if moisture periodically accumulates there.

When the fight against mold lasts for many years, it can only be won by taking drastic measures. old bath, the sink and tiles will have to be replaced. The small cracks that have formed on them over time have become places where the fungus continues to multiply. Even after spring cleaning If these problem areas are not addressed, the mold will return. The vicious circle will continue and life between the tiles will flourish.

Reducing dampness

If your apartment has low-quality pipes and condensation constantly forms on them, then the previous two steps will not bring results. It will be possible to completely eliminate the fungus only after the pipe insulation has been improved.

Constant condensation is one of the reasons for the appearance of mold on the floor, ceiling, and walls.

After all the above points, the room will need to be dried very well; an electric heater is suitable for this. After which you can start using various means against mold, which also cannot be avoided.

How can you clean mold in the bathroom?

Mold is a rather caustic and tenacious fungus, and dealing with it is not an easy task. When all the technical aspects have been improved, cleaned and dried, it’s time to clean the surfaces from mold with products that can be prepared at home or purchased at a specialty store.

Baking soda

Baking soda will help remove mold from horizontal surfaces.

Sprinkle a small amount of baking soda onto contaminated areas of the bathtub, sink or floor so that it covers the mold with a thin layer.
Vinegar is added on top, after the reaction is complete and the soda stops foaming, it is removed with a soap solution or cleaning compound.
After removing traces of mold, the bathtub is washed running water and wipe dry with a soft cloth.

Do not be afraid to clean the joints between the bathtub and the wall with soda; it does not leave any marks on the sealant, does not change its color and is absolutely safe.

Table vinegar

The following composition quickly and very effectively copes with mold:

pour water into the container, add 2 tablespoons of vinegar, 2 tablespoons of hydrogen peroxide, 1 teaspoon of boric acid. All ingredients are mixed;
Using a sponge or rag, wipe the contaminated areas with the prepared composition;
After removing all dirt, the bath is washed with running water and wiped dry with a soft, clean cloth.

The prepared composition is suitable not only for cleaning the bathtub and walls, it does an excellent job of removing fungus that can spread to a curtain or curtain. They are carefully wiped with the product and rinsed in running water.

Hydrogen peroxide

Mold is a caustic fungus, but removing it does not always require preparing complex cleaning compounds. If you cannot find all of the above remedies in your home at once, then you can use a mixture of only two, which will be almost as effective in fighting fungus.

Pour warm water into a container, add two tablespoons of hydrogen peroxide to it and mix with the same amount of table vinegar. Stir.
Soak a clean rag or sponge in the prepared solution and apply to the contaminated areas. Leave for 30-40 minutes. During this time, a chemical reaction must occur that will remove the fungus from the surface.
After the time has passed, thoroughly rinse all areas with warm running water and blot with a dry cloth.

Hydrogen peroxide not only kills the fungus itself, it eliminates yellowness and brings bathroom surfaces back to life. Allows you to clean tiles without damaging them or changing their color.

Ammonia

When the pollution is extensive, only drastic measures will help deal with it, but if everything in your bathroom is not so bad, then you can use the following remedy:

to four parts of water add two parts of ammonia and two parts of any detergent;
the prepared mixture is applied to the contaminated areas and left for 20-30 minutes;
After the time has passed, the applied composition is washed off with warm running water, and the surface is wiped dry with a clean cloth.

Ammonia copes well with mold, while it has an antiseptic effect and does not allow fungal spores to spread to other surfaces, aggravating the problem. A product based on ammonia can be used not only to remove mold, but also as a prophylactic agent to prevent its formation.

Copper sulfate

When no other means can completely get rid of mold, you can use copper sulfate, which perfectly eliminates this problem.

It is very important to use copper sulfate on time and follow safety precautions. You should not start cleaning the bathroom without wearing rubber gloves.

In a bucket or basin, dissolve copper sulfate in water in a ratio of 1 to 10. Mix thoroughly.
To apply to contaminated areas, it is best to use a brush instead of a rag or sponge. Wet thoroughly problem areas cleaning solution and leave for approximately one hour.
After the time has passed, rinse off the applied composition with running water, it is advisable to do this several times in order to completely remove traces of the product.
Dry the surfaces with a clean cloth and ventilate the bathroom.

If the contamination was so strong that it was not possible to remove the contamination the first time, then repeat the procedure, increasing the exposure time.

Boric acid

The following solution will help remove old traces of mold:

Pour 10 liters into a bucket clean water.
Add 500 g of boric acid, 1 kg of borax and two tablespoons of vinegar. Stir with a wooden stick.
Apply the prepared solution to the contaminated areas using a sponge or spray bottle and leave for several hours.
After the allotted time, rinse off the applied composition with clean running water. Dry bathroom surfaces.

To consolidate the result, repeat the procedure after a few days. Boric acid does not corrode surfaces, so it can be used regularly to clean mold from surfaces. At the same time, it can leave burns on the skin, so do not come into contact with the solution without rubber gloves.

Chlorine

Not every product can cope with extensive stains. However, chlorine products can do this.

pour water into a container and dilute it with chlorine bleach in a ratio of 1 to 1;
Apply the product to the surface using a sponge;
rub into seams and cracks with a brush;
rinse with warm running water, dry and apply sealant to the joints.

Bleach is very toxic, so before you start cleaning, make sure you wear a face mask and rubber gloves. After removing mold, ventilate the room.

Antifungal agents

In apartments with old renovations, mold often forms in the cracks between the tiles, which is extremely difficult to remove. To do this, the tile seams are sawn, cleaned, and treated generously with an antifungal agent. After drying, the seams are rubbed again.

This method of combating mold is very drastic; it is better to regularly clean the room and prevent a large accumulation of mold.

Antifungicides

If you have tried all sorts of home remedies to get rid of mold, but it returns regularly. Then you should seek help from a specialized store. Modern industry produces big choice products that work well against mold, even with large accumulations of it.

Visiting the store household chemicals, consult with a specialist, she will have to tell you which product is best to use. Antifungicides are usually used to rid a room of mold. Before you start using it, read the instructions carefully and strictly follow the recommendations. Do not forget about safety measures; you must wear rubber gloves and a mask.

When choosing a product, make sure that it is designed to eliminate mold from surfaces, and that it is used to prevent it.

Video: how to get rid of mold in the bathroom at home?

How to remove black mold in the bathroom?

Some are afraid when they see traces of black mold on the wall and don’t know what product to grab. In fact, you can use any of the above remedies to remove it.

You can also prepare a special composition:

Dilute 4 parts water, 2 parts hydrogen peroxide, 1 part boric acid, 3 parts table vinegar into a small container.
All ingredients are thoroughly mixed.
Using a sponge, apply the solution to the contaminated areas and rub in thoroughly.
15-20 minutes after application, it should be washed off with warm running water.
Be sure to wipe the surface dry with a clean soft cloth.
Ventilate the room and do not use it for 6 hours.

Mold is an insidious fungus; it can appear even in seemingly washing conditions. Regular cleaning does not always prevent its occurrence, but good ventilation will be a good preventative measure.

Make sure that there is no high humidity in the bathroom for a long time, and that condensation does not settle on the pipes, then you will not have to deal with the problem of mold.

The seams between tiles in the bathroom are the most dirty place. It is most susceptible to mold and dust. And moisture getting on the seams will only strengthen the stains.

Regularly washing floors and walls after taking water procedures will not solve the problem, because not every housewife has time for this. Therefore, women are thinking about how to wash and clean the dirty seams between the tiles in the bathroom.

Why wash tile grout?

Washing seams is not only aesthetic and flawless appearance bathroom, but also an important concern for the health of the household. It is there that bacteria and black mold, which is no less dangerous for the human body, multiply best.

Therefore, high-quality grout cleaning will create additional protection from harmful microorganisms, ensuring better hygiene.

Grandma's recipes

Tile has long been included in interior design, and experienced housewives They know the secrets of returning the original appearance not only to tiles, but also to removing dirt on its seams. The most proven and effective ways Guidelines to help you tidy up bathroom tile grout lines are given below.

A mixture of baking soda, fresh lemon juice and vinegar

The amount of ingredients will be as follows:

soda – ½ cup;
vinegar (9%) – ¼ cup.

Dissolve all of the above components in 1.5 liters of boiled water and cooled to room temperature water. The acid released by lemon and vinegar when they enter chemical reaction with soda will lead to increased foaming. To prevent splashes from staining surrounding objects, you need to stir the composition with leisurely movements.

First put rubber gloves on your hands. Rub the resulting product into the tile joints using an old toothbrush or a sponge with a hard side. The composition will return the tile and its joints to original appearance in 15-20 minutes.

Crystals can be an alternative to lemon juice citric acid.

Ammonia

Ammonia will not only clean the tiles, but also give them a dazzling shine. We need to act in the following way:

dissolve one tablespoon of ammonia in two liters of clean water;
using a spray bottle, spray the product onto each seam and tile squares;
leave for 15-20 minutes;
Wipe off any remaining solution and dirt with a slightly damp cloth.

Ammonia will cope not only with germs, but also remove fresh mold.

Whiteness and soda

Bleach and soda are two active ingredients that also effectively deal with mold.

You need to prepare a paste using these products: pour the whiteness into a container and add enough baking soda so that the solution acquires a pasty consistency.

Using a spatula, apply the compound to each seam and leave until it is completely dry. After this, rinse off the product with water, using better cleaning brush or sponge.

If the color of the grout is not white, but of a different shade, then this method will not work, since the whiteness included in the product will bleach the paint.

Since bleach is a substance not only with a pungent odor, but also contains chlorine, it is important to take precautions before work - protect your hands with rubber gloves, and your face with a gauze bandage.

Soda, lemon, toothpaste, mustard

In this case, you will need a mixture of baking soda, fresh lemon juice, toothpaste or powder and mustard. The proportions will be as follows:

soda – ½ cup;
lemon juice – 1/3 squeezed fruit;
toothpaste or powder – 1 teaspoon;
mustard powder – 1 tablespoon.

Pour 1 liter of water into a container and add all of the above components in the indicated quantities. Mix well. Using a sponge, rub the product into the surface of each grout joint. After 30 minutes, rinse off the composition with warm, clean water.

Hot steam

This means the absence of any cleaning products. Steam cleaner releasing steam under high pressure, will quickly and efficiently clean the joints between the tiles in the bathroom. A jet of hot steam will not only soften dirt, but also knock it out of the joints, killing fungus, mold and bacteria.

All of the above methods do not require much financial return or time investment. But they are not always able to cope with deeply ingrained dirt. In this case, you will have to use purchased compounds.

How to clean the seams between tiles using household products?

Household chemicals presented in household goods stores do not always meet health safety requirements. Many substances contained in the products are toxic.

Therefore, every time you work with them you need to use gloves and a protective face mask. How to clean seams using store-bought products? Which ones should you buy?

Cleaning marker. It is filled with waterproof dye. In addition to destroying harmful microorganisms, the felt-tip pen will mask defects on the seams.
Oxygen bleach. It is mixed with warm water in a 1:1 ratio. Apply the composition to the tiles with a sponge, paying special attention to the seams between the tiles. Leave for 1-1.5 hours. The ions contained in the bleach will destroy contaminants that have penetrated deep into the seams. Residues can be easily removed with a stiff brush.
"White". It can be used not only as part of folk remedies, but also as an independent substance. The entire surface of the tiles in the bathroom is treated with white, including the seams between the tiles.
Melamine sponge- an expensive but effective remedy in the fight against visible pollution. However, it will not cope with mold.

Stores also sell other compositions for cleaning tiles in the bathroom and kitchen. These are Sif, Ultrastripper, “Mr. Muscle”, BOZO, “Atlas Dolphin”. They must be used in accordance with the instructions indicated on the packaging.

All purchased funds one way or another they contain chlorine, so they should only be used on white grout.

A radical solution to the problem, or If the mold has penetrated too deeply

All the products described above can cope with dirt and mold, which has appeared relatively recently. If the fungus has penetrated deeply into the grout joints, you will have to act radically.

A scraper will help. Use it to clean off all the grout.

Ideally, if mold has appeared in the bathroom, you should change the tiles or remove them, clean them of glue or fastening mortar and reinstall them. But there is not always time and opportunity for this.

But we can’t just let things take their course. Mold is dangerous to health, especially for people prone to allergic reactions and asthmatic attacks.

The solution is to completely remove the grout and disinfect it. A hand or eclectic tool will help you remove the grout from the joints. It is better to entrust such work to professionals.

If you decide to act on your own, be sure to wear a protective mask and goggles on your face, since the dust generated as a result of the work can get into your respiratory system and eyes.

Before cleaning the seams, they need to be softened with water and vinegar.

After the grout has been completely removed, each seam must be carefully treated with special antifungal solutions, then rubbed again with a compound for them using a spatula.

Little secrets

Cleaning any type of tile has its own characteristics. They influence choosing the tool to be used in further work.

If the surface of the tile is glazed, then acids cannot be used on it, otherwise the tile will fade.
Upon completion of work, matte tiles should always be treated with mastic protective properties. It creates a film that will prevent the surface from getting dirty longer.
Mosaic, like glass tile, resistant to irritants. But they should not be treated with products containing large quantities of alkali and acid.
Compositions with abrasive elements - in the form of granular powders or crystalline components, as well as too hard brushes, are best not to be used on any surface.
When choosing grout for joints, pay attention to products with epoxy base. Not only are they resistant to stains, but they are also resistant to mold and mildew.

So that you don’t have to rack your brains over the task of how to clean the seams between the tiles, don’t be lazy to clean the bathroom regularly. Then the dirt will not have time to eat into the surface, and your tiles will become cleaner.

Source: http://adella.ru/home/cleaning/pochistit-shvy-mezhdu-plitkoj.html

Mold in the bathroom - the most effective ways to combat it

Black mold in the bathroom - how to get rid of this problem? The process will be long and difficult, and many housewives do not know how to get it out between the tiles on the wall - one of the most vulnerable places that suffers first. To effectively and quickly deal with fungus, you need to understand why it appears so often.

Fungus accumulates on walls, in corners, between tiles and other places.

If you don’t start getting rid of it, then each time it will spread over all surfaces, and in this case it will be extremely difficult to remove it. The shower room is the most favorable place for fungus to grow, since it is there that high humidity and the absence of ultraviolet rays prevail.

Ultraviolet light kills fungal spores, and humidity is a favorable environment for its reproduction. Removing mold in the bathroom takes time and regular preventive measures.

Also, improper operation of the hood or its absence can cause the lesion to actively grow. Due to the fact that it is possible to completely destroy fungus in the bathroom only by eliminating high humidity in the room, you will have to change the ventilation.

The fact is that powerful ventilation ensures air circulation, and fungal spores cannot cling to the surface. That is why there is most mold in hard-to-reach, closed places. In addition, the heated towel rail should work both in winter and summer.

Since after swimming or washing, condensation remains on the surfaces, which provokes the appearance of fungus. Most often it is found in the space between tiles, in shower stalls, and in the bathroom. Receive special attention hard to reach places, in which a lot of moisture accumulates.

Improper plumbing is also a source of excess moisture. If this problem is not resolved, then attempts to deal with the problem will not bring any results.

The first and main reason is the detrimental effect on human body, and therefore the task of how to remove black mold in your bathroom should be solved first.

Fungal spores can enter the body through airborne droplets, skin contact, and ingestion of moldy food through the esophagus.

Some types of mold are particularly toxic and can cause serious illnesses and allergic reactions, such as:

headache;
abdominal pain, nausea;
runny nose, cough, pneumonia, asthma, sinusitis;
allergic reactions on the skin. Headaches. Abdominal pain, nausea. Runny nose, cough, pneumonia, asthma, sinusitis. Allergic reactions on the skin.

The second reason is the aesthetic factor. Even on new plumbing it reproduces without difficulty and black growths spoil general form in the shower. Therefore, this problem must be taken seriously and not neglected, since the fungus multiplies very quickly, and after each bath there is more and more of it. How to deal with mold in the bathroom is described below.

If there is a lot of mold and it has become deeply embedded in the surface, then you need to use a respirator. Also, do not use a vacuum cleaner without a special HEPA filter, it can spread fungal spores through the air and only worsen the situation.

Fungus in the bathroom - how to get rid of such a lesion? Housewives are often concerned about how to clean the seams in the bathroom from mold, because it spreads quite quickly and it is difficult to remove it from the seams in the corners.

Before you begin the removal procedure, you need to isolate the room so that fungal spores do not scatter throughout the apartment. First, open access to fresh air if there is a window. If there is sufficient air circulation, the spores will not be able to settle. Secondly, close the door tightly.

A common place for fungus in the bathroom is on the seams of the tiles - since it is especially difficult to get rid of it, it is better to use a spray bottle. So, how to get rid of mold in the bathroom at home - consider natural and chemical influences.

There are natural and chemicals to combat mold.

Bleach solution

This bathroom mold remover, for example, is quite easy to prepare and is designed to average level pollution. For it you will need:

two buckets and three spray bottles;
bleach – 250 ml;
detergent;
4 liters of clean water.

To begin, you will need to mix bleach and warm water in one bucket, and dilute detergent and water in another. Then pour these solutions and separately water into spray bottles.

Then you need to spray the bleach and detergent solution on the affected areas and wipe each area well.

It is also necessary to change the rags and immediately throw them into a sealed bag so that the spores are not spread to other objects.

Many housewives only think about how to clean the sofa or clothes from dust, paint or animal hair.

Tea tree oil

This method refers to folk remedies, so you need to repeat the procedure several times. It is a good natural antiseptic that is used for a variety of purposes - even cosmetic. For this method have to take:

2 tablespoons of oil;
500 ml. water;
spray.

Water and oil must be mixed well and shaken to obtain a homogeneous consistency. Then you need to spread it generously over the mold and let it soak for 10 minutes. The specific smell of the oil may not be to everyone's taste, but don't worry - it will quickly disappear after airing.

Baking soda

Soda is especially popular among housewives due to its good cleansing and whitening properties. This is a chemical-free cleaning product that will not cause allergies.

To prepare the solution, you need to take water and baking soda 1:1.

Using a spray bottle, apply the solution to the stain and it is advisable not to wash it off, because it will not only eliminate it, but also prevent its reappearance.

The bleach is designed for medium levels of contamination. Tea tree oil is a natural antiseptic. Soda has good cleaning properties.

Hydrogen peroxide

It is a well-known antiseptic and antifungal agent widely used in every home. 3% hydrogen peroxide is sold at the pharmacy and can simply be applied to the affected area.

On colored surfaces you should try peroxide on small area, because peroxide, like soda, has bleaching properties.

Since it is quite difficult to clean mold, it is necessary to thoroughly rub the problem area and rinse well.

Vinegar

Vinegar can be found in every kitchen and can be used to get rid of infestations quickly and effectively. Its action is similar to bleach, but unlike it, vinegar does not emit harmful fumes.

It is better to apply it using a spray bottle and wipe with a damp cloth. After an hour, the treated surface should be rinsed well with water and the room should be ventilated.

Borax

Borax is a white powder, a natural ingredient that will help to permanently solve the problem of how to remove fungus in the bathroom. Borax is a good working product and has a disinfectant and antifungal effect. To prepare the borax mixture, you need the following:

300 ml. drills;
4 liters warm water;
spray;
brush.

Mix borax and water, stir well until completely dissolved. Spray the solution onto the affected area and scrub thoroughly with a brush. You can also make it thicker.

Hydrogen peroxide is a known anti-fungal agent. Vinegar should be applied using a spray bottle. Borax is an excellent disinfectant.

Air ionization

If all the previous methods did not help, it makes sense to trust a professional. This process requires contacting a specialist who has been trained; you cannot do this procedure yourself.

It consists in sending a stream of air to the desired location, which contains ions that destroy fungal spores. This service is quite expensive, but very effective.

This method is also suitable if you don’t know how to remove large quantities of fungus in the bathroom between the tiles on the wall. In addition to mold, air ionization will help get rid of some insects.

Microwave

Are you wondering how to clean your bathroom tiles 100% of mold and mildew? In order to completely remove mold, microwave method fits better Total. It is also performed by specialists.

Its meaning is that millimeter frequencies heat the surface and under this influence almost all types of mold die. This includes multi-colored mold and rot.

This method is considered radical and eliminates the problem completely, but this does not mean that after it is carried out, prevention can be neglected. It will also help get rid of insects.

Capital measures

These can be either natural, folk remedies, and more aggressive ones, which are sold in construction stores. After everything has been carefully processed, be sure to dry the area and ventilate the room, then you can begin restoration.

Unfortunately, advanced cases are not subject to local cleansing, and only complete scraping is the best remedy from mold in the bathroom.

It is not at all necessary to spend money on expensive products; first you should try to act on your own, not forgetting the safety rules.

The process of air ionization requires contacting a specialist. Under the influence of microwaves, almost all types of mold die. In advanced cases, you can remove the plaster and treat the surface with antifungal agents. Copper sulfate is toxic, you must follow safety rules. Preventing the appearance of mold in advance will help Preliminary processing walls with ready-made mixtures.

Copper sulfate

If you don’t want to spend money on repairs and ionization, but don’t know how to get rid of fungus in the bathroom at home without spending a lot of money, copper sulfate comes to the rescue.

This product can be bought in the store. It is worth noting that it is toxic.

The main rule when using is to comply with safety measures (work with rubber gloves, wear a respirator) and completely remove residues.

Mixtures

Today the range ready-made solutions and mixtures for cleaning plumbing fixtures are extensive. Removing mold in different places produced different ways, so you need to consult with the seller, for example, how to treat the walls in the bathroom against fungus and mold. He will help you choose the right remedy and will tell you what and how to destroy fungus in the bathroom.

Of course, it is better to prevent a problem than to fix it. Therefore, even if mold removal work has been carried out, important rules must be followed in the future, without which the problem may return.

1It is necessary to constantly eliminate sources of excess moisture. The heated towel rail should work, leaking taps should be eliminated, and fresh air should be regularly allowed into the room. After a shower, the door should be open for some time. It is also not recommended to dry items after washing; they create an additional humid environment.
2 Carefully monitor the operation of the hood - it must be clean and circulate air well.
3Do not neglect the container for toothbrushes, because water often stagnates there, and subsequently the brushes become covered with black fungus.
4 Throw away moldy food immediately to avoid the spread of fungus throughout the apartment.
5Na cast iron pipes Condensation may form. WITH plastic pipes such a problem does not arise.
6Regular cleaning of plumbing fixtures is the best remedy for fungus in the bathroom.
7After the removal procedure, you can spray vinegar around the room for a month to prevent spores from multiplying again.
If the work of the hood is not enough, then it is recommended to buy a special device that will dehydrate the air. Thus, the room will always be dry and there will be no favorable environment for fungus. A heated towel rail should be working in the bathroom. Make sure the hood is clean. Mold often forms in the toothbrush container. Throw away products with mold.
Give preference to plastic pipes. Cleaning the bathroom should be regular. Vinegar prevents mold. Use a device to dehydrate the air.

It is better to prevent its occurrence from the very beginning, and when moving to new apartment or during repairs it is worth carrying out preventive measures: treating the surfaces with an antibacterial and antifungal agent. Don't forget to follow the important rules.

You will provide yourself and your loved ones with the absence of allergies and harmful effects, and the question of how to remove fungus in the bathroom will be closed.

Source: http://pochistit.ru/plesen-v-vannoj.html

How to clean the grout between bathroom tiles?

If you neglect to clean the walls and floors after each bath, sooner or later disgusting dirt and mold will appear on the walls and floors. Water, lime and dust accumulate in the joints between the tiles, which is an excellent breeding ground for fungal growth.

Tiles – excellent finishing material, which is classified as durable and easy to maintain. However, rarely does anyone manage to avoid darkening, against which the usual wet cleaning is powerless. The sloppy appearance of tile joints that were recently white will upset any housewife.

Before we move on to learning how to clean seams, let's figure out why tile seams darken. The level of contamination depends on the purpose of the room in which the tiles were laid.

Often, in the hallway and kitchen, the coating quickly loses its appearance, because these rooms are more polluted than others. The tiles themselves are washed regularly, but cleaning the seams is much more difficult, so this space is not cleaned often.

The method of dealing with darkening must be chosen depending on the type of contamination. They are caused by food and detergent residues, dust, and street dirt.

Even after a thorough cleaning, tile joints may still have a sloppy appearance. But there are still ways to return the seams to their original state, and there are quite a lot of them.

It is necessary to make a mixture of water and table soda in a ratio of 3 to 1. The result should be a thick paste, which is suitable for cleaning colored joints, but can harm natural materials such as limestone and marble. The operating algorithm is as follows:

The paste is applied to the joint with fingers wearing rubber gloves so as not to cause microtrauma to the skin of the hands;
A solution of water and vinegar is made in a ratio of 1 to 1. The solution is poured into a container with a spray bottle;
The product is sprayed onto the applied paste. The mass begins to bubble, therefore, a chemical reaction process has begun;
Wait until the bubbling stops;
Clean the joints with a stiff brush;
Wet clean several times to remove any remaining solution.

Oxidized bleach in a volume of 2 tablespoons is dissolved in 2 glasses of water;
It is necessary to test the liquid in an inconspicuous place before applying it to the entire tiled surface. In some cases, the grout will change color, so make sure you don't ruin the grout;
We water the seams with solution.
We clean in small areas so that puddles of liquid do not collect on the floor;
Rub the solution into the joint with a brush. It is necessary to go especially carefully around the corners and edges;
At the end, you need to rinse the floor thoroughly.

Make a paste of 3/4 cup baking soda, 1/4 peroxide and 1 tablespoon dish soap. This method very effective due to its components:

Baking soda works as an abrasive;
Peroxide reacts with baking soda, thereby having a whitening effect;
Dish detergent easily removes grease.

Steam cleaners perfectly clean and disinfect the gaps between tiles without the use of chemicals. This household appliance You don’t have to buy it; you’ll probably find offers to rent it. A steam cleaner that comes with a hose and a brush attachment will work for you.

Clean with a steam cleaner according to the instructions. After turning on, wait until the device reaches the required temperature. The instructions will indicate how long you need to wait. The steam method is effective not only for removing dust and dirt, but also mold.

Another enemy that is extremely difficult to overcome is black mold. Her disgusting growths on the walls and floor between the tiles can cancel out even the most expensive and sophisticated bathroom renovations.

There are several methods that can get rid of this blackness. Let's start with homemade recipes, because many housewives do not welcome the use of chemicals in everyday life, fearing harm to health. In addition, home methods are much more economical than buying expensive cleaning products.

The most effective recipes for killing mold:

Paste of soda and chlorine powder. Bleach or any other cleaning powder containing chlorine will do. The resulting mixture of soda and bleach effectively brightens and disinfects the surface. But as mentioned above, mixtures containing bleach are not suitable for colored seams. When working with aggressive substances such as chlorine, wear gloves and a protective mask. The mixture is applied with a spatula to problem areas until dry. Then all this is washed off with water.
Citric acid, soda and vinegar. Another working home method for combating mold is a solution of water, vinegar, citric acid and soda. If the moldiness is insignificant, then you can treat the affected areas with vinegar without dilution, then rinse off.
Ammonia. Dissolve two tablespoons of ammonia in two liters of water. Then spray the solution onto the affected surface. After a quarter of an hour, go through with a damp cloth and wipe dry. The antimicrobial effect of ammonia will help get rid of black plaque.
Steam. A steam generator will help deal not only with dirt, but also with mold. The device supplies hot steam under pressure, which softens and pushes out dirt from the tile joints, and heat destroys mold and mildew.

It is not always possible to get rid of blackness using home methods, and then it is worth turning to specialized products aimed at combating mold.

Household chemicals do not always work desired results, and there’s not much pleasant in the smell of vinegar and bleach.

Today you can buy many effective means, which will get rid of mold and protect against its occurrence in the future. The most popular means include:

"Atlas Dolphin"- This is a protective emulsion; it does not clean, but creates a film that prevents the deposition of dirt and bacteria. It is applied immediately after grouting or after cleaning the seams. This protection will help keep your bath clean.
"Bozo"– a concentrate that removes lime and rust, disinfects and eliminates odors. It is diluted in a ratio of 1 to 4, but the fungus is directly treated with pure concentrate.
"Mellerud" - An excellent product for cleaning bathroom tiles. Quickly removes soap and lime stains, refreshing the color of grout and tiles. For routine cleaning, it is recommended to dilute 125 g of product per bucket of water. For old stains, use without dilution.
"Snowball"– a special pencil that whitens seams and kills fungus. The product is effective for shallow lesions.
Melamine sponge- This is not an absorbent cleaning item, as you might think, but a detergent. It is a kind of eraser that erases dirt and erases itself. Just wet the sponge and try to clean off the dirt.

All these substances are much stronger and more concentrated than homemade components, and this is certainly a plus, but the minus is their high toxicity, so it is better to carry out the work in a respirator, ensuring ventilation of the room.

In advanced cases, more serious measures are needed, since the fungus has managed to settle deep in the grout. It would be best, of course, to remove old tiles, clean and disinfect the surface and put on a new one. If major renovation is not included in the plans, you will have to deep clean the seams.

Grouting is tedious and hard work, but it's worth it. The work can be done with a spatula, but it is better to use a drill with a half-disk attachment, this will somewhat simplify the task.

Before work, the tile joints should be wetted with water and vinegar to make the grout more pliable. After this, the joints need to be washed, dried and treated with antifungal agents, and then grouted again.

Be careful when walking on wet floors - flooring the cleaning solution makes it too slippery. This applies to all bathroom cleaning methods.

After cleaning, you can apply sealant to the seams, then they will remain clean longer. Do not use metal brushes– they will scratch the tiles and ruin the seams.

When working with such materials, choose products with a neutral pH.

To learn how to clean the seams between tiles, see the following video.

Black mold in the bathroom - how to get rid of this trouble? The process will be long and difficult, and many housewives do not know how to get it out between the tiles on the wall - one of the most vulnerable places that suffers first. To effectively and quickly deal with fungus, you need to understand why it appears so often.

Fungus accumulates on walls, in corners, between tiles and other places.

If you see black growths on the walls, in corners, between tiles and other places, then these are traces of fungal growth. It is transported by air and can enter an apartment on people, animals, or things. If you don’t start getting rid of it, then each time it will spread over all surfaces, and in this case it will be extremely difficult to remove it. The shower room is the most favorable place for fungus to grow, since it is there that high humidity and the absence of ultraviolet rays prevail. Ultraviolet light kills fungal spores, and humidity is a favorable environment for its reproduction. Removing mold in the bathroom takes time and regular preventive measures.

Also, improper operation of the hood or its absence can cause the lesion to actively grow. Due to the fact that it is possible to completely destroy fungus in the bathroom only by eliminating high humidity in the room, you will have to change the ventilation. The fact is that powerful ventilation ensures air circulation, and fungal spores cannot cling to the surface. That is why there is most mold in hard-to-reach, closed places. In addition, the heated towel rail should work both in winter and summer. Since after swimming or washing, condensation remains on the surfaces, which provokes the appearance of fungus. Most often it is found in the space between tiles, in shower stalls, and in the bathroom. Particular attention is paid to hard-to-reach places where a lot of moisture accumulates. Improper operation of plumbing is also a source of excess moisture. If this problem is not resolved, then attempts to deal with the problem will not bring any results.

Why delete it?

The first and main reason is the detrimental effect on the human body, and therefore the problem of how to remove black mold in your bathroom should be solved first. Fungal spores can enter the body through airborne droplets, skin contact, and ingestion of moldy food through the esophagus. Some types of mold are particularly toxic and can cause serious illnesses and allergic reactions, such as:

The second reason is the aesthetic factor. Even on new plumbing, it multiplies without difficulty and black growths spoil the overall appearance of the shower room. Therefore, this problem must be taken seriously and not neglected, since the fungus multiplies very quickly, and after each bath there is more and more of it. How to deal with mold in the bathroom is described below.

And so, it’s time to figure out how to remove mold in the toilet or bathroom in the tile seams and other places. Due attention should be paid to the issue of safety - work only with gloves and wear a special anti-dust mask; it is also recommended to have safety glasses. If there is a lot of mold and it has become deeply embedded in the surface, then you need to use a respirator. Also, do not use a vacuum cleaner without a special HEPA filter, it can spread fungal spores through the air and only worsen the situation. Fungus in the bathroom - how to get rid of such a lesion? Housewives are often concerned about how to clean the seams in the bathroom from mold, because it spreads quite quickly and it is difficult to remove it from the seams in the corners.

Methods to combat this problem vary depending on the size of the affected area. If the process has just begun and there is not much mold, then it will be enough to scrape off the affected area, dry it well and finally apply an antiseptic to the area. A common place for fungus in the bathroom is on the seams of the tiles - since it is especially difficult to get rid of it, it is better to use a spray bottle. So, how to get rid of mold in the bathroom at home - consider natural and chemical influences.

There are natural and chemical remedies to combat mold.

Bleach solution

This bathroom mold remover, for example, is quite easy to prepare and is designed for medium levels of soiling. For it you will need:

two buckets and three spray bottles;
bleach - 250 ml;
detergent;
4 liters of clean water.

To begin, you will need to mix bleach and warm water in one bucket, and dilute detergent and water in another. Then pour these solutions and separately water into spray bottles. Then you need to spray the bleach and detergent solution on the affected areas and wipe each area well. It is also necessary to change the rags and immediately throw them into a sealed bag so that the spores are not spread to other objects.

Tea tree oil

2 tablespoons of oil;
500 ml. water;
spray.

Baking soda

Soda is especially popular among housewives due to its good cleansing and whitening properties. This is a chemical-free cleaning product that will not cause allergies. To prepare the solution, you need to take water and baking soda 1:1. Using a spray bottle, apply the solution to the stain and it is advisable not to wash it off, because it will not only eliminate it, but also prevent its reappearance.

Bleach is designed for medium levels of soiling.
Tea tree oil is a natural antiseptic. Baking soda has good cleansing properties.

Hydrogen peroxide

It is a well-known antiseptic and antifungal agent widely used in every home. 3% hydrogen peroxide is sold at the pharmacy and can simply be applied to the affected area. On colored surfaces, you need to try peroxide on a small area, because peroxide, like soda, has bleaching properties. Since it is quite difficult to clean mold, it is necessary to thoroughly rub the problem area and rinse well.

Vinegar

Vinegar can be found in every kitchen and can be used to get rid of infestations quickly and effectively. Its action is similar to bleach, but unlike it, vinegar does not emit harmful fumes. It is better to apply it using a spray bottle and wipe with a damp cloth. After an hour, the treated surface should be rinsed well with water and the room should be ventilated. For prevention, it is recommended to spray with vinegar several times a week.

Borax

300 ml. drills;
4 liters of warm water;
spray;
brush.

Mix borax and water, stir well until completely dissolved. Spray the solution onto the affected area and scrub thoroughly with a brush. You can also make it thicker.

Hydrogen peroxide is a well-known antifungal agent.
Vinegar must be applied using a spray bottle. Borax is an excellent disinfectant.

If the situation is in a bad state, then many give up completely, and it is no longer clear how to remove mold in the bathroom completely and forever. But there are other, more radical and expensive methods.

Air ionization

If all the previous methods did not help, it makes sense to trust a professional. This process requires contacting a specialist who has been trained; you cannot do this procedure yourself. It consists in sending a stream of air to the desired location, which contains ions that destroy fungal spores. This service is quite expensive, but very effective. This method is also suitable if you don’t know how to remove large quantities of fungus in the bathroom between the tiles on the wall. In addition to mold, air ionization will help get rid of some insects.

Microwave

Are you wondering how to clean your bathroom tiles 100% of mold and mildew? In order to completely remove mold, the microwave method is best suited. It is also performed by specialists. Its meaning is that millimeter frequencies heat the surface and under this influence almost all types of mold die. This includes multi-colored mold and rot. This method is considered radical and eliminates the problem completely, but this does not mean that after it is carried out, prevention can be neglected. It will also help get rid of insects.

Capital measures

If large areas are affected, it becomes impossible to cope with it locally. Moreover, if you don’t know how to clean the mold in your bathroom between the tiles on the wall, in this case you will need to remove the plaster and treat the surface with antifungal agents. These can be either natural, folk remedies, or more aggressive ones, which are sold in hardware stores. After everything has been carefully processed, be sure to dry the area and ventilate the room, then you can begin restoration. Unfortunately, advanced cases are not subject to local cleaning, and only complete scraping is the best remedy for mold in the bathroom.

It is not at all necessary to spend money on expensive products; first you should try to act on your own, not forgetting the safety rules.

The process of air ionization requires contacting a specialist.
Under the influence of microwaves, almost all types of mold die.
In advanced cases, you can remove the plaster and treat the surface with antifungal agents.
Copper sulfate is toxic; safety rules must be followed.
Pre-treatment of walls with ready-made mixtures will help prevent the appearance of mold in advance.

Copper sulfate

If you don’t want to spend money on repairs and ionization, but don’t know how to get rid of fungus in the bathroom at home without spending a lot of money, copper sulfate comes to the rescue. This product can be bought in the store. It is worth noting that it is toxic. The main rule when using is to comply with safety measures (work with rubber gloves, wear a respirator) and completely remove residues.

Mixtures

Today, the range of ready-made solutions and mixtures for cleaning plumbing fixtures is extensive. Mold removal in different places is done in different ways, so you need to consult with the seller, for example, how to treat the walls in the bathroom from fungus and mold. He will help you choose the right product and tell you what and how to destroy fungus in the bathroom.

Prevention of occurrence

It is necessary to constantly eliminate sources of excess moisture. The heated towel rail should work, leaking taps should be eliminated, and fresh air should be regularly allowed into the room. After a shower, the door should be open for some time. It is also not recommended to dry items after washing; they create an additional humid environment.
Carefully monitor the operation of the hood - it must be clean and circulate air well.
Don’t neglect the container for toothbrushes, because water often stagnates there, and subsequently the brushes become covered with black fungus.
Throw away moldy food immediately to avoid the spread of fungus throughout the apartment.
Condensation may accumulate on cast iron pipes. This problem does not arise with plastic pipes.
Regular cleaning of plumbing fixtures is the best remedy for fungus in the bathroom.
After the removal procedure, you can spray vinegar around the room for a month to prevent the spores from multiplying again.
If the work of the hood is not enough, then it is recommended to buy a special device that will dehydrate the air. Thus, the room will always be dry and there will be no favorable environment for fungus.
Vinegar prevents mold.
Use an air dehydrator.

These simple rules will help avoid the appearance of unpleasant fungus, which is quite difficult to remove completely. Not only the safety of the plumbing is at risk, but also the health of all household members, especially if children, pets or allergy sufferers live in the house. From the very beginning, it is better to prevent its occurrence, and when moving to a new apartment or during renovation, it is worth carrying out prevention: treating the surfaces with an antibacterial and antifungal agent. Don't forget to follow the important rules. You will provide yourself and your loved ones with the absence of allergies and harmful effects, and the question of how to remove fungus in the bathroom will be closed.

Dampness in the bathroom is a fact that cannot be avoided. Under these conditions, fungus appears on surfaces. We'll tell you how to prevent an unwanted neighborhood and how to get rid of mold if it does appear.

Reasons for appearance

Mycelium spores are present in every room. But for successful reproduction they need warmth and moisture. The heating system and constant humidity above 90% provoke the development of microorganisms. Tiny black or greenish spots quickly grow into large, unpleasant blots. Other reasons for this scourge include:

- stagnant warm air good for bacterial growth;
poor walls and ceilings - coatings that are not properly treated become damp, giving black plaque a breeding ground.

The fungus multiplies not only on the surface of the walls, but also on furniture, the back wall of the washing machine, and the bottom. Leaks from pipes can provoke its appearance. Water, dripping little by little, constantly moistens the floor, creating a favorable nutrient environment.

Why is black mold in the bathroom dangerous?

There are many varieties of fungus. In urban apartments, the biggest concern is black mold. Her spores appear on the concrete, brick wall, plastic, glass or paint. In addition to the unpleasant appearance, the danger is the destructive effect it has on the surface. Black blots corrode not only natural materials, but also created artificially, damaging beyond the possibility of recovery.

In addition to aesthetic troubles, the fungus provokes respiratory diseases, allergic reactions, and dermatitis. Its spores in the air penetrate the body, multiply and accumulate there, causing general intoxication.

Remedies

The mycelium is a living organism, so simply wiping it off with a wet cloth will not work. Depending on the state of neglect, mechanical repair may be necessary, chemical cleaning or removing the entire top layer of finish down to the base.

When starting cleaning, it is necessary to moisten the moldy areas with water to prevent spores from becoming airborne or getting on other surfaces. Then use a steel brush or metal scraper to clean the affected area. The mycelium penetrates deep into the surface structure, so the material must be removed to a healthy layer. Treat cleaned areas.

Copper sulfate. Gardeners are well acquainted with this inexpensive and effective substance. Its aqueous solution is sprayed onto the infected area, previously treated with a soap mixture. The surface dries, after which the procedure is repeated as necessary 2-3 times.
Chlorine. Household substances based on it are effective in combating mycelium. They contain an aggressive component that destroys most fungi. “Domestos”, “Sanita” or “Belizna” not only wash the fabric, but also clean problem areas. The infected area should be washed with a sponge and undiluted solution.
Vinegar. Table 6-9% solution is an excellent antiseptic. Use a sponge or rag soaked in undiluted vinegar to wipe the problem area and leave until completely dry. Then rinse the surface with water and ventilate the room well.
Borax. The natural mineral has good antiseptic properties. Use a mixture of 1 cup of borax and 2.5 liters of water to clean the moldy area. After complete drying, remove any protruding crystals with a dry cloth. If the affected area is large, you can spray it with a solution of 1 cup of borax and 4 liters of water.
Soda. A safe and natural antiseptic is diluted in the proportion of 1 teaspoon per glass of water. This mixture can be used to clean the source of infection using a sponge or sprayer. There is no need to rinse off the baking soda.
Hydrogen peroxide. An inexpensive and non-toxic liquid that can be found at the pharmacy. When processing colored surfaces, it is possible to bleach the base.
Ammonia. Well suited for processing dense hard coatings (glass, ceramic tiles). It is diluted in a 1:1 ratio and applied to the wall with a spray bottle or sponge. After a few hours it can be washed off with water. Not suitable for porous materials (wood, concrete, drywall).

Mold is a serious problem. If you encounter it, you need to remove the mold in the bathroom as soon as possible.

Special chemicals and folk experience will help with this.

The bathroom is a place prone to the formation of fungi. This is due to the fact that favorable conditions have been created in the room for the development of various types of mold.

Main reasons:

high humidity
minimal natural light
poor ventilation
high air temperature.

The appearance of mold worsens the appearance of the room and negatively affects people's health. If you do not get rid of mold in time, diseases such as bronchial asthma, allergic rhinitis and candidiasis may develop.

Where does mold come from and why is it dangerous?

It is quite possible to destroy fungus in the bathroom. However, before this it is necessary to understand the reasons for its appearance.

It's all about high humidity, which occurs in the bathroom for a number of reasons:

the room is heated unevenly;
constant washing;
the room is not ventilated.

The walls and ceilings of the bathroom are sources of the appearance and proliferation of fungi. At the same time, mold is destructive not so much for the premises as for people’s health. If you destroy the mycelium, you can destroy the entire fungal body.

As a rule, what we see on the walls of the bathroom is a fungal body located a few meters from the mycelium.

At the moment, drugs designed to combat fungus make it possible to get rid of mold in the bathroom on the tiles and between the tiles. It is best to treat the entire room completely, even under the plumbing fixtures.

But most main task is to find and eliminate the cause of mold.

Black mold is a dangerous mold. Long time The development of the fungus can go unnoticed until comfortable conditions for its manifestation. Favorable conditions for mold to occur - an unventilated room, high humidity and temperature - 20 ° C.

Black mold in the bathroom is weakly attached to the surface and easily scatters in different directions. Mold is dangerous because when it enters the human respiratory tract, it causes various infections.

Black mold is the most difficult to combat in the bathroom. To get rid of black mold permanently, you may need to use more than one antifungal product.

How to remove mold in the bathroom on the ceiling and from the walls?

Mold in the bathroom can usually be removed using antifungal agents.

However, before cleaning the mold in the bathroom, you need to pre-treat the surfaces.

It is advisable to remove the top surface layer. Then the surface to be treated is dried with a hair dryer.

You should not turn on the water in the room during work; the air should be dry. Then treatment with antifungal agents occurs.

Don't forget to wear a respirator and rubber gloves to prevent chemicals and spores from entering your body.

At the moment there are many remedies for fungus in the bathroom:

copper sulfate solution,
a solution of water and bleach,
industrial chemical antifungicides.

Copper sulfate is excellent at removing mold from bathroom walls. It is easy to use, but it is toxic, so you must follow safety precautions: wear a respirator and gloves.

Copper sulfate must be diluted according to the instructions (100 g of sulfate, 10 liters of water).
The composition is applied to the surface to be treated with a brush. Those places that are affected by fungus should be spread with a thick layer.
Wait a few hours, then the treated surfaces should be thoroughly washed and dried. Ventilate the bathroom.

Another solution for removing mold on bathroom ceilings and walls is a solution of bleach and water. The downside is the pungent smell. You must wear gloves and a respirator.

Make a solution of bleach and water – 10:1.
Apply the solution with a rag, spray, sponge or brush.
There is no need to rinse the surface; bleach will prevent mold from reoccurring.
After use, ventilate the room.

Antifungicides for mold and mildew in the bathroom are divided into two categories:

preparations used by builders to combat biocorrosion,
products to remove household black mold.

Most drugs are sold in plastic packages, the capacity is 1 liter. In order to prepare the solution, take a cap of the contents per liter of water. The active ingredients in such preparations are QAC (quaternary ammonium compounds) and guanide derivatives.

How to fight with folk remedies

Chemical products are not suitable for people suffering from respiratory diseases and allergies. However, in this case, there are folk remedies that allow you to wash off mold in the bathroom.

First method: baking soda slaked with vinegar

When removing mold in the bathroom, sprinkle more baking soda on the affected surface and top it with vinegar. After the foam settles, wash the surface with warm water and soap, or any detergent.

Method two: tea tree oil

Dissolve two teaspoons of tea tree oil in two glasses of warm water.
The solution is applied to the tiles using a sprayer.
No rinsing required.

It is better to carry out the procedure at night, when no one in the household is visiting the bathroom.

Third way

This product works well to remove black mold in the bathroom.

Prepare a solution of 2 parts hydrogen peroxide, 4 parts water, 1 part boric acid, 2 parts vinegar.
The affected surfaces are wiped with the composition.

Neutralize the smell

How to get rid of mold smell?

The fact is that the smell of mold will completely go away only with the mold. Check all areas in the bathroom for fungus. Ventilate the room.

After you have gotten rid of mold, it is recommended to leave an open pack of soda in the bathroom, it absorbs well. bad smell. Don't forget to wipe it down periodically baking soda surfaces in the bathroom.

How to protect

To protect premises from mold, it is necessary to combat the phenomena that contribute to the appearance of fungus:

Ventilate the room regularly, or better yet, install an exhaust fan.
Ensure high-quality waterproofing of pipes.
Make sure your plumbing fixtures are in good working order.
Install a powerful heated towel rail.
If the walls in the bathroom are in contact with cold air, for example, the bathroom wall is in contact with a landing that is poorly heated, invest in insulating the bathroom wall from the inside.
Remove cracks on the wall.
Clean the ventilation regularly.
Install heated floors in the bathroom.

So, the appearance of mold in the bathroom is an unpleasant fact. Don’t delay getting rid of it, otherwise it may have a detrimental effect on your health!

Modern means help remove the fungus in a short period of time. Preventive methods will help prevent the recurrence of mold in the bathroom.