Scale appears due to impurities contained in low-quality water. During boiling, they settle on the walls of the kettle and spoil the taste of hot drinks. Scale also conducts heat poorly, so a dirty kettle will take longer to boil.
How to clean a kettle with vinegar
The method is suitable for very dirty teapots made of plastic, glass, and stainless steel.
You will need:
- ½ liter of water;
- 1 glass of 9 percent vinegar or 2 tablespoons of 70 percent vinegar essence.
Heat water in a kettle, then pour in vinegar or vinegar essence and leave the solution for an hour. During this time, the scale will soften. Rinse the inside of the kettle with a sponge and boil again clean water and drain it.
How to clean a kettle with lemon or citric acid
The method is suitable for electric kettles made of stainless steel, plastic or glass with a moderate layer.
Not suitable for enamel and aluminum kettles.
You will need:
- ½ liter of water;
- ¼ lemon or 2 tablespoons of citric acid.
Heat water in a kettle and add a piece of lemon or citric acid to the boiling water. Leave the scale to soak for 1-2 hours. Wash the kettle with a sponge and rinse thoroughly. After the first boil, the water will need to be drained.
How to clean a kettle with soda
The method is suitable for any teapots.
You will need:
- ½ liter of water;
- 1 tablespoon baking soda.
Stir the baking soda thoroughly in a glass of water until it dissolves completely. Pour the resulting liquid into the kettle, add the remaining water and boil it. Wait half an hour or an hour and heat the kettle again.
Now you can wash the kettle and boil clean water in it. True, you will have to pour it out afterwards.
How to clean a kettle with soda water
The method is suitable for stainless steel kettles heated on a stove.
Not suitable for aluminum, enamel and electric kettles.
You will need a bottle of any lemonade. The most famous option is cola, but it is better to use a colorless drink (it is important that the composition contains citric acid).
Let the opened bottle of lemonade sit for 2-3 hours to allow the gas bubbles to disappear. Then it’s simple: pour the drink into the kettle and bring to a boil. Then wash and rinse everything thoroughly.
How to clean a kettle with a peel
The method is suitable for enameled and metal teapots with a weak layer of scale.
Not suitable for electric kettles.
You will need:
- ½ liter of water;
- skin of 2–3 apples or pears.
Rinse the cleaning from dirt and sand, put them in a kettle and fill with water. Boil the liquid and leave to steep for one to two hours. A light layer of scale will come off on its own; rub stubborn stains with a dishwashing sponge. After rinsing, the kettle will shine like new.
If you have a particularly spacious kettle, and scale has accumulated on the walls, take more water than indicated in the recipes. The liquid should cover the dirt completely.
How to keep your kettle clean for a long time
- Fill the kettle with soft water. If you don't buy bottled, use a filter. Or at least let the tap water sit for several hours to allow impurities to precipitate.
- Boil water in a kettle no more than once. Better fill it with fresh one.
- Rinse the inside of the kettle at least once a day. And ideally before each use.
- For the sake of prevention, boil a filled kettle with one tablespoon of citric acid once a month.
Takes ~2 minutes to read
Among the electrical appliances used in the kitchen, the electric kettle occupies an important place. One day there comes a time when plaque appears in the kettle. After this, the operation of the heating element is disrupted and an odor appears. To prevent this phenomenon, the internal surface of the electric kettle is regularly cleaned. How to descale an electric kettle accessible ways, let's discuss in more detail.
Save
What is scale?
Usually boiled in an electric kettle tap water, which has high hardness due to salts. When water boils, it forms carbon dioxide and calcined mixture. It creates a coating on internal surfaces. Even water that has passed through a filter produces sediment because it is impossible to remove salts 100%.
Save
If deposits are not removed in a timely manner, the following consequences are possible:
- The thermal output of the heating element decreases - the water will take longer to heat up, and energy costs will increase;
- Drinking water with sediment leads to exacerbation of chronic diseases.
Housewives use methods known for a long time. However, there are some special features for electric kettles. It is important to remember that if you use an untested method, the effect will be the opposite, and the kettle will have to be disposed of. Before proceeding with the removal of limescale deposits, inspect internal state teapot. Models made of plastic are not processed chemical solutions. When cleaned, an open spiral will lose its protective layer and begin to rust.
Save
- Family members are warned about cleaning;
- Before cleaning, water is poured in, and then the cleaning composition is added;
- Cleaning is completed by thorough rinsing with running water;
- Deposits must not be removed with sharp objects or abrasive powders;
- In case of heavy precipitation, several cleaning methods are used.
Helpful Tips:
- Cleaning is carried out regularly, since it is impossible to get rid of deposits once and for all, because this is a natural process of heating water.
- There will be less scale if you soften tap water, for example, filter it before filling the kettle.
- For cleaning, compositions with less side effects, for example, citric acid.
How to clean an electric kettle using folk remedies (including glass)
As a rule, deposits appear on the bottom and walls of an electric kettle. Experienced housewives they know how to reduce their appearance, and if they appear, how to get rid of them (glass models are no exception). First of all, it is not recommended to use sharp objects for scraping. Here are some of the ways to clean an electric kettle from limescale at home.
How to clean an electric kettle with lemon and citric acid
The snow-white, crystalline powder intended for culinary purposes is known as citric acid. The powder is sold in the form of bags weighing up to 50 grams. It is known that calcium deposits are destroyed in an acidic environment. Cleaning an electric kettle is based on this principle.
Save
It is done this way:
- The container is thoroughly washed to remove delamination;
- Fill 2/3 of the volume with water, add a bag of powder;
- The solution begins to boil. After boiling, the water boils and large particles of sediment flake off. With a small layer, 15 minutes are enough to clean the internal surfaces;
- The boiled solution is drained, the surfaces are wiped with a soft sponge;
- At the final stage, the water is boiled twice without powder.
Adviсe:
- Do not pour the powder into boiling water, as foam will form due to the reaction.
- The quality of cleaning will improve if the solution is left overnight.
If you don’t have citric acid powder, then freshly squeezed juice will do. In this case, the sediment is removed using the method described earlier.
Save
Cleaning using lemon slices is easier:
- The lemon is cut into slices, which are placed on the bottom of the teapot;
- The water should boil for up to half an hour and then cool;
- The cooled water is drained, and the removed scale is removed with a soft sponge.
Flaw This method is that it is effective only with minor scale.
Baking soda
Drinking or baking soda is found in every housewife's kitchen cabinet. It is used not only as a food additive for cooking, but also as medicine. Its special property is associated with its effect on sediment.
Cleaning is performed in the following sequence:
- A liter of water is poured in, soda is added. Three tablespoons are enough;
- The solution is boiled for half an hour and then cools;
- The cooled water is removed, the internal surfaces are wiped with a sponge;
- The kettle is washed, filled with water, and heated.
Vinegar and essence
The fermented raw material is distilled into acetic acid. After diluting with water, the acid produces vinegar essence with a concentration of up to 80%. Table vinegar of the required concentration is obtained after diluting the essence.
Removal of sediments with solutions is carried out in the following sequence:
- Half a glass of 6% vinegar or 2 tablespoons of essence is poured into a filled kettle;
- After boiling, the solution cools down for 4 hours. If the scale is very large, then it is better to leave the solution overnight;
- The vinegar solution is removed and the kettle is thoroughly washed. Unpleasant smell goes away after prolonged airing.
Is it possible to clean an electric kettle with carbonated drinks?
Most carbonated drinks contain acid. For example, lemonade contains phosphoric acid. To use it, you must choose a colorless drink, otherwise the internal surfaces will become colored.
To wash using this method, do the following:
- A liter of soda is poured into the kettle;
- The lemonade is brought to a boil and cooled;
- After some time, the drink is drained and washed with clean water.
Advice! If not heavy pollution All you need to do is pour lemonade over it for a few hours and then clean the surfaces with a sponge.
Oxalic acid
Some plants (spinach, sorrel) contain an acid called oxalic acid. It is a colorless crystalline powder, almost completely soluble. It is sold in hardware stores. Noted high efficiency powder for cleaning deposits. When working, precautions must be taken.
Cleaning is carried out using the following method:
- A little powder is poured in, water is poured in;
- The solution is boiled and settled for several minutes;
- Dissolved deposits are removed with a sponge, after which a thorough rinsing is performed.
Advice! Small scale can be washed off with fresh sorrel leaves. Due to the low percentage of oxalic acid, the solution is boiled several times.
How to clean limescale in an electric kettle using household chemicals
When folk remedies fail or it is necessary to achieve quick effect, household chemicals come to the rescue. Typically, the rules for using chemical compounds are indicated on the packaging.
Save
However, what they all have in common is the following sequence:
- The dose of the substance specified in the instructions is dissolved in the kettle;
- The resulting solution is boiled for up to half an hour;
- After a short settling, the dissolved scale is drained;
- The inner surface is thoroughly washed, after which the water is boiled several times.
The most common drugs household chemicals“Antinakipin” and “Cinderella” are considered. As a rule, when using chemicals for the first time, the scale flakes off and falls off in pieces. Cleaning ends after repeated rinsing of the inner container.
Preventing scale formation
An electric kettle is available on long time protect against scale formation if simple rules are followed.
- Purchase a model with a closed spiral or with a disk, since in this option cleaning is simpler and more effective.
- Doesn't flood running water, which has high rigidity. Only settled, melted or spring water is boiled. In addition, the installed filter reliably protects against all impurities.
- Minimum boiling is performed required quantity water. Unused boiling water is drained and fresh water is collected.
- Rinsing is performed before and after boiling.
- Surfaces are wiped with a sponge daily.
- Cleaning is carried out regularly (regardless of the amount of scale).
So, you can protect your electric kettle from scale different ways. Each method has advantages and disadvantages.
One of the effective substances for cleaning dishes is baking soda. Many housewives know how to descale a kettle with soda and share their experience. When water boils, a coating of salts and impurities contained in the water, called scale, forms on the walls. Scale deteriorates the quality of water and has a negative impact on health. It also reduces the thermal conductivity of the kettle. Heating water will take more time and energy, so scale must be removed periodically. Scale deposits on the electric kettle spiral lead to rapid breakdowns.
Various methods are used for descaling chemicals, for example, "Adipinka" and home remedies.
The cleaning capabilities of soda have long been known and are successfully used by housewives to clean surfaces made of metal, earthenware and porcelain. Thanks to the features chemical composition, the substance removes contaminants faster and more effectively compared to other products. The chemical name of soda is sodium bicarbonate, also known as sodium bicarbonate. Externally, it is a white crystalline powder with alkaline properties.
Benefits of using baking soda for cleaning:
- Active antiseptic – cleans and disinfects dishes
- Non-toxic and safe for health
- Cheapness and availability
Baking soda, when interacting with other substances, enhances its properties, so it is often used in various cleaning compositions consisting of several components.
Basic rules for cleaning scale
- Home remedies are less dangerous than chemical ones. However, it is better to carry out descaling work when no one in the household is at home and warn them not to use the kettle.
- When contacting soda, it is better to protect your hands with gloves, especially if there is damage to the skin.
- It is recommended to clean the kettle weekly. With regular cleaning, you won't need to scrub the walls for a long time.
- A large layer of scale spoils the taste of tea. You won’t be able to get the aroma and unique taste, even when brewing expensive tea.
- Carbonated water has become a new remedy for scale. The effectiveness is explained by the presence of the same soda in the composition.
- Vinegar cannot be used for enamel and electric kettles.
- Scratches easily appear on the walls of a stainless steel kettle, so it can only be descaled using a gentle method.
- Delete rusty coating, not yet ingrained into the surface, can also be done with soda.
- Boiling clean water will help wash off any remaining acid. Drain the cooled water into the sink.
- Abrasive agents and hard scrapers damage the surface.
As you know, prevention is easier than elimination. This also applies to scale. The following tips will help you avoid frequent cleaning:
- State tap water affects the formation of scale on the walls of the kettle. The harder the water, the faster scale forms. Therefore, you need to take care of quality drinking water. As a last resort, use settled, boiled water.
- Don't take in too much water. Avoid boiling water again and do not leave water in the kettle overnight.
- Always rinse before use to remove white flakes.
- For the purpose of prevention, boil water twice a month with citric acid(1 tsp for a teapot).
Removing scale with soda
Cleaning a kettle from scale is based on the use of acids of organic and inorganic origin. The effect of baking soda helps to soften and loosen scale, and it dissolves in acetic or citric acid.
To remove scale on the walls, pour 1 liter of water into the kettle and add a large spoonful of soda. Bring the contents to a boil, reduce the heat to low and leave for half an hour at a low simmer. Then the contents of the kettle are poured out and clean water is boiled to rinse the dishes. After boiling, this water is also removed.
In an electric kettle, scale can be easily removed with a soda solution. Bring it to a boil and leave for 2 hours until it cools. During this time, deposits on the walls and spirals will soften and can be easily removed under running water or a sponge.
Clean the kettle with soda and vinegar
Common and effective way fight against scale. Does not require any time and guarantees excellent results.
You need to fill the kettle with tap water, add 2 small spoons of soda per 1 liter of water. In case of severe contamination, increase the amount of soda. Heat the solution to a boil, leave for 10-20 minutes. Drain and add the next portion of water. Prepare a soda solution again and add vinegar essence (1 tsp). Required proportion: for 1 liter of water 1 small spoon of essence. Boil the contents of the kettle and leave for 20 minutes. Pour out the solution. Using a sponge, remove the softened deposits from inside the kettle. Rinse with plenty of water. Not prevent additional boiling clean water.
Another method involves separately boiling first the soda solution and then the vinegar solution. To do this, in a bowl with hot water pour vinegar essence (2 tbsp). Boil and let sit for half an hour. The scale will soften and can be easily removed with a sponge. Rinse with water.
The disadvantage of using vinegar is its persistent specific odor. Vinegar is allowed for stainless steel teapots.
Soda with citric acid
A good cleaning effect is achieved by combining soda with citric acid. If vinegar is not at hand, citric acid will replace it. Moreover, after its use there is no smell left, like after vinegar. Soda has a loosening effect on scale, and acid promotes dissolution.
The kettle is filled with water, soda and citric acid are added in a ratio of 4 tsp per 2 liters of water. acid and baking soda. Boil and cool. During cooling, active dissolution of scale occurs. Pour out the solution. Bring the water to a boil again with just citric acid. Cool and drain. Remove any remaining plaque with a sponge and lightly rub if necessary. Rinse thoroughly with water. Carry out a test boil of clean water.
There is another way to clean using soda and citric acid. In a kettle, first bring water and soda to a boil (2 tablespoons per 2 liters of water). Leave for 30 minutes and drain. Refill with water and add citric acid (2 small spoons per 2 liters). Boil for a few minutes and leave until cool. Drain the water and wash the residue on the walls with a sponge.
Using a similar scheme, you can get rid of scale using fresh lemons. Just replace the citric acid with large pieces of two chopped citrus fruits.
A mixture of salt and soda
A mixture of baking soda and salt can quickly remove small deposits without boiling. Moisten the surface of the kettle, take a small amount of the mixture onto a soft sponge and wipe with light movements.
Removing large layers of scale
All kettles, except electric kettles, are cleaned of old scale with a mixture of vinegar, soda and citric acid. Complex processing in several stages will be required.
In a kettle, dilute water with a tablespoon of soda and boil. Pour out the contents. Fill with water adding 1 tbsp. citric acid. Boil and keep at low simmer for half an hour. In the third stage, pour water into an empty kettle and 1/2 cup of vinegar. After boiling, simmer for another half hour. Drain the solution. After the procedure, plaque may remain on the walls, but it has already softened and can be removed with a sponge. To rinse the kettle, bring clean water to a boil and remove. Repeat several times.
Soda and acetic acid. The product is effective for thick plaque. But it cannot be used for an electric kettle. Take 2 tbsp. l. soda and 2 liters of water. Let the ingredients simmer for half an hour. Drain and fill clean, adding 1 tbsp. vinegar, boil for 30 minutes. The scale deposits will become soft and easy to clean with a sponge, after which you must rinse with water.
Cleaning the teapot
Baking soda does more than just remove scale after boiling water. Baking soda will also help to easily remove plaque and get rid of odors in a teapot. In a saucepan large enough to submerge the kettle, boil water with 4 tablespoons of soda and a glass of vinegar. Lower the teapot into the foam. Leave for 20-30 minutes, remove and rinse. The peculiarity of the method is that it is cleaned inner surface spout, where it is difficult to reach with a sponge and other means.
If you carry out the procedure regularly, you can always enjoy the aroma and taste of tea.
How to eliminate odor in a new kettle
The new kettle must be washed before use. This can be done by boiling clean water 2-3 times. Boiling a soda solution helps to rinse and get rid of the smell. To do this, you need to pour 3 tbsp into the water. soda Allow the solution to cool and then rinse with water. The smell is completely eliminated.
Removing scale from an enamel kettle at home
The enamel teapot remains the most popular, despite the emergence electrical appliances. It is beautiful and practical. To keep it in good condition, it is necessary to carry out regular descaling. They do this in the following ways:
- Place finely chopped lemon in the middle, fill 2/3 of the volume with water and boil for 10-15 minutes. Leave until cool.
- With the help of cleanings. Skins from apples, pears or potatoes are suitable. You can use one type of cleaning or a mixture. Fill the kettle halfway, add water and boil for half an hour. Apple and pear peels not only remove scale, but also restore the color of the enamel.
- Popular and interesting way fight scale with carbonated water. Coca-Cola or Sprite will do. The liquid is poured until it is full. Heat to boiling and cool. After an hour or an hour and a half, the scale will dissolve.
- Using soda and vinegar. Pour baking soda (5 tablespoons per 2 liters of water) into boiling water. Boil for 25-30 minutes. Cool and drain the water. Fill the kettle with 1/4 cup. vinegar essence and 2 liters of water. Boil for 25 minutes. Pour out the contents and use a wooden spatula to separate the scale particles. After cooling, rinse the kettle.
Scale formation is promoted by excessive mineralization of water. Water must be purified using filters or purchased. Clean water is good for health and scale does not form.
The modern variety of teapots is amazing. It’s hard to keep up with innovations: manufacturers are experimenting with materials, technologies, shapes and colors. To ensure that the kettle lasts a long time, it is recommended to use spring, filtered or bottled water. And if this is not possible, let the tap water stand for 24 hours.
Why does plaque appear?
Over time, scale will appear in any kettle. But increased water hardness will shorten these times many times and cause many problems. Firstly, scale is dangerous for the heating element. A coil or metal disk covered with plaque quickly overheats, loses heat transfer, and eventually burns out. Secondly, boiling will require additional energy costs. Well, it is clear that water only from clean dishes will give coffee or tea a good taste.
Hard water contains excess amounts of calcium and magnesium salts. A hardness of 3 to 6 mEq/L is considered normal. White and dark spots on faucets, sink or toilet, clogged holes in the shower tube, whitish spots on washed dishes, constant lime deposits in the kettle are sure signs of high water hardness (from 6 to 9 mEq/l).
Many people believe that installing a filter (jug, flow or reverse osmosis) will completely eliminate the scale problem. In fact, it will reduce plaque formation, but only slightly. The action of most filters is not aimed at softening water, but at mechanically cleaning it from heavy metals and bleach.
How to descale a kettle: special chemistry
How to wash an aluminum kettle and remove rust? Before descaling a kettle, you need to remember: it is impossible to mechanically remove scale that has already formed. If you start scrubbing or scratching it with your own hands, you will ruin the device. Therefore, in our time, many chemicals to combat scale. Basically, these are liquid or powdered preparations based on soda ash.
They all have an identical principle of operation: pour the indicated dosage into the kettle, fill the device with water to the maximum mark and boil. After this, rinse thoroughly, boil fresh water again and drain.
Do not use cleaning gels and powders with large abrasive granules. They will scratch the surface, and the scale will stick even more firmly to the bottom and walls of the kettle.
Main disadvantage industrial products is that chemicals can enter the stomach. So it's not harmless. Yes, and not all formulations give the desired effect.
The old fashioned way
You can rest assured: time-tested folk recipes guarantee 100% positive results. Ordinary soda, vinegar and lemon juice are recognized leaders among descalers in a kettle. To successfully get rid of solid deposits, you will need knowledge about dosages, stages of cleansing and rules of use in different types devices. You can also boil it to remove contaminants.
For a regular enamel teapot
Such specimens are increasingly rare in modern kitchen interior. But, of course, people continue to buy them, because they are much cheaper than their electric counterpart. look after enamel teapot easy enough. The main thing is to do everything in a timely manner.
Vinegar
- Fill the kettle with a solution of two parts water and one part vinegar. Bring to a boil and cool naturally.
- Then drain the water and rinse the dishes thoroughly.
- If the sediment has not completely disappeared, repeat the procedure.
To boil a kettle from scale with vinegar and avoid poisoning from the caustic steam, during operation you need to open the windows and put on protective clothing. gauze mask. And before using the kettle, you should once again boil clean water “idle” to eliminate the specific vinegar aroma.
Lemon acid
- Fill the kettle with lemon water at the rate of 10 g of lemon per liter of water.
- Boil.
- Leave the hot solution for several hours.
- Pour and thoroughly rinse off the lime grains.
You can replace the store-bought product with lemon: cut it into pieces and boil for ten minutes.
Soda
- Boil a soda solution in a kettle, diluted in the following proportion: two tablespoons of baking soda per liter of water.
- Wait until it cools down and remove soft deposits with a sponge.
- If the quality of descaling is not satisfactory, repeat twice.
- This procedure can also be used to precede vinegar cleaning.
For electrical appliance
The electric kettle is very easy to use. Heats water quickly and almost silently, looks very aesthetically pleasing and modern. Irreproachable appearance Such a teapot also requires internal cleanliness. Regular care especially needed heating elements. It is more convenient to clean a kettle with a disk heater than with a spiral one, reminiscent of a Soviet-era boiler. In addition, the first one is more durable and heats water faster. How to effectively descale an electric kettle? Which methods are suitable for devices made of different materials?
From glass
- Boil water with a couple of tablespoons of citric acid and the same amount of soda powder.
- Let it sit for up to 20 minutes.
- Wash off the natural acid-base composition.
Vinegar will help to successfully remove scale from a glass electric kettle. Everything is extremely simple: open the window, boil water and only after turning off the electrical appliance, pour two or three tablespoons of food vinegar into the boiling water, cover kitchen towel until completely cooled. Make sure it's shiny metal surface the heater did not darken. Rinse thoroughly with running water.
Made of stainless steel
- Pour a full kettle of water (standard capacity - 1.7 liters).
- Add a couple of tablespoons of baking soda and boil.
- After cooling, remove the white flakes with a soft washcloth.
- Rinse thoroughly.
A stainless steel kettle is less susceptible to the formation of limescale deposits. Nevertheless, a few more tips will be useful on how to quickly get rid of scale in a kettle made of this material. So, you can boil the brine from pickled cucumbers or tomatoes in a container. Cleaning with apple or grape vinegar is also recommended - pour a glass of the product into a boiled liter of water and leave for half an hour.
Made of ceramics
Beautiful painted ceramic teapots, although very durable, require careful and careful attitude. There are no special recommendations for cleaning plaque, so choose one of the recipes suggested above.
Remember safety precautions when working with boiling water and cleaning agents. folk remedies. This is important because, according to reviews, ceramic teapots are quite heavy, retain heat for a very long time and have rather uncomfortable handles that get very hot.
Made of plastic
Such an electrical appliance is the cheapest, lightest and most unpretentious. It will be as good as new if you clean it with any product you have at hand. You can also try and evaluate a unique method: boil water with apple peelings in a saucepan, let it brew for a while and pour it into an electric kettle. After a couple of hours, pour the compote into the sink and rinse the cleaned dishes with water.
Advanced cases, if the plaque does not go away
You don't know how to delete strong scale in a teapot? Advanced cases will be “cured” by the following method, consisting of six simple steps.
- Add three tablespoons of soda to a kettle of boiling water.
- After half an hour, boil again and pour out immediately.
- Take fresh water and now add a couple of tablespoons of vinegar.
- Boil the solution again and pour it out after half an hour.
- Remove the resulting loose mass with a soft sponge.
- Rinse well so that no vinegar smell remains.
Does the Coca-Cola method work?
Salt deposits of calcium and magnesium dissolve under the influence of citric, acetic, orthophosphoric acids. The latter - H3PO4 - is part of the popular drink Coca-Cola. To descale a kettle with Coca-Cola, you just need to pour 0.5 liters of the drink into the appliance (this is enough to completely cover the heater). In 15 minutes, soda will remove light deposits without boiling. You can consolidate the effect by boiling this sweet aromatic liquid in a kettle and at the end simply rinsing it well with water.
This unusual way Suitable for glass teapot. And for plastic, stainless steel and ceramics, avoid drinks with dyes, they can pigment the walls of the electrical appliance. Try boiling regular sparkling water.
Practice shows that The best way To remove lime deposits, descale the kettle with citric acid by boiling water with a couple of spoons of lemon juice. It turns out cleaner and cheaper than using Coca-Cola, and also without the pungent odor, as is the case with vinegar.
"Options" for scale
Interestingly, there are ways not only to remove scale from a kettle, but also how to prevent its occurrence. To do this, you just need to select a device with additional “options”. Some models (though they are more expensive) have cleaning cartridges installed inside them that filter and heat the water at the same time. There are also teapots with gold-plated spirals, the function of which is to protect the part from hard deposits and corrosion. But the most “advanced” users recommend installing an electromagnetic water converter at home. So in one fell swoop you can solve all problems with increased water hardness and protect not only the kettle from scale, but also washing machine along with a water heating tank.
Every housewife has a kettle in her kitchen. Some people prefer to heat water for coffee or tea on gas, while others use electric kettles. Glass models are extremely resistant to impact high temperatures, do not absorb odor, have a beautiful appearance. But over time, scale forms in any vessel, no matter what kind of water you use. Scale appears due to the build-up of salts and minerals contained in water. The rate of plaque formation depends on its quality. But even if you install super-sophisticated filters, sooner or later plaque will still appear. In an electric kettle, scale forms around the heating coil and causes it to burn out after some time. To prevent this from happening, you need to periodically get rid of plaque. How to clean a glass electric kettle from scale at home and remove plaque? We will deal with this in this article.
Anti-scale products
There are several ways to clean and wash Glass teapot from scale. You can use chemicals or traditional methods, which are good because they are safe, plus similar cleaning substances are available in every kitchen. Let's take a closer look.
Vinegar
This is proven effective, completely safe way Clean the glass teapot from scale. In addition, it has an antibacterial effect. So the microbes will have a hard time.
How to proceed:
- Pour equal parts water and vinegar into a container.
- Boil this solution.
- Leave everything inside for 2 hours.
- Pour out the liquid and clean off any remaining plaque with a sponge. You need to wash it carefully.
- If necessary, the procedure can be repeated.
- After cleaning, boil clean water a couple more times and drain.
Lemon acid
Another simple one effective method getting rid of plaque - citric acid. This method is suitable for any type of cookware. It is even believed that cleaning with citric acid is more effective than vinegar:
- Pour water into the device, add citric acid. For 1 liter there are 2-3 teaspoons of citric acid.
- Boil the liquid.
- Leave until completely cool.
- Drain off the cleaning agent and remove any softened residue with a sponge.
- Boil the water in the device several times and drain before using it.
Important! Citric acid can be replaced with lemon juice. Just squeeze one citrus fruit into a bowl of water.
Baking soda
Cleaning with soda is done as follows:
- Dissolve in hot water baking soda, pour into a container.
- Leave for 15 minutes, then boil.
- Wait until the liquid cools down.
- Rinse kitchen utensils thoroughly to remove any remaining cleaning product and scale.
Soda and vinegar
How else can you clean a glass teapot? You can clean the device with a mixture of soda and vinegar:
- Dissolve 2 tablespoons of vinegar and 2 tablespoons of soda in water.
- Pour this mixture into the device to the maximum mark.
- Boil the liquid several times and leave to cool.
- Drain the solution. Use a soft sponge to remove any remaining plaque.
- Rinse well inner part dishes in running water.
Lemon and vinegar
You can get rid of plaque inside the vessel by mixing lemon and vinegar:
- Dissolve 2 tablespoons of lemon juice or citric acid and 2 tablespoons of vinegar in 1 liter of liquid.
- Pour the mixture into the device.
- Boil this solution several times.
- Drain the liquid and clean the device with a sponge.
- Rinse well.
Lemon and soda
The combination of lemon juice and baking soda will give good result in the fight against plaque from excessively hard tap water. This mixture will degrease and remove deposits, leaving behind a pleasant lemon smell.
Boil water several times with 2 tablespoons of lemon juice and 2 tablespoons of baking soda.
Carbonated drinks
Strange as it may sound, but clear limescale You can use carbonated drinks. For glass electric kettles would be better suited“Sprite”, since colored drinks, such as Coca-Cola, can leave marks on the walls.
Pour one glass of lemonade into a container and fill it with water. Boil this mixture several times, drain and clean off any remaining plaque with a sponge.
Important! If the coating is very strong, there is no need to dilute with water - fill the container ⅔ full with soda only.
Other non-standard cleaning methods
What people come up with and what they use to clean their dishes from harmful scale:
- Pour the cucumber brine into the container and bring to a boil several times. In fact, the method is effective, since the product is nothing more than a concentrated saline solution.
- Place the washed apple or potato peels in a container, add a little salt and fill with water. Boil water along with the cleaning agents and leave everything until the liquid cools. Then all you have to do is clean off any remaining plaque with a sponge and rinse the device thoroughly. This is also a completely understandable option, since apples contain natural active acids, and potatoes contain starch. Both are capable of removing contaminants of various origins, including scale.
Kalgon
Among the chemical agents for combating lime and salt deposits on glass electric kettles, Calgon is best suited. This product is dishwasher safe and washing machines with a unique composition will come in handy. One package will last you a long time.
In order to remove scale with Calgon, you need to dilute 1 teaspoon of the product in 3 liters of water and boil it all in a vessel with scale. After this, removing the remaining plaque will not be difficult.
Important! After this, it is advisable to boil the water in the vessel several times and drain it. After this, the device can be used.
Prevention measures
In order for the kettle to last for a long time, you need to follow these recommendations:
- Fill the device with filtered water.
- A small layer of plaque is easier to remove, so clean the device at least once a month, or even better - once a week.
- Drain the water after each use.
- Do not keep water in the container; leave the container dry.
