Installation of door trim and trim. Trims on MDF doors - how to choose the best option and secure it correctly What are telescopic door trims

Estet doors are produced in Novocheboksarsk, where they take place full cycle processing according to technology. This is confirmed by numerous certificates and documents on compliance with standards.

Choosing interior systems Estet for an apartment

Beautiful and high-quality doors in an apartment are a standard that anyone strives to achieve. good housewife, especially when it comes to interiors. They not only protect the premises from dust, sunlight, noise and drafts, but also serve as a delimiter of space, at the same time being a continuation of the interior of the room or an accent in the room. Estet doors from the Novocheboksarsk manufacturer fully meet these requirements.

The Estel company, which appeared on the market in 2002, launched production activities in 2007, began producing high-quality wood products and soon became one of the leaders in this field. Currently, it produces about 200 thousand door panels with components, has a network of branded showrooms in 15 cities of Russia, and actively works with domestic and foreign partners.
From raw materials to high-quality products, doors go through many technological stages, at each of which they are subject to strict controls. Thanks to strict adherence to production technology and tracking of defects, the buyer receives a finished product, for the quality of which the manufacturing company is responsible for its good name.

Production Features

Material for making the frame and door frame wood serves coniferous species trees. It is sawn into fragments and carefully processed, removing natural pockets of resin, knots and damage. Dried beams glued together along their length lose the tension of solid wood, and therefore almost do not react to sudden changes in temperature and humidity in the room. Thanks to this property, the product does not deform.
The frame is covered with a layer of PVC, which is currently comparable in strength to veneer, but significantly exceeds it in a number of other characteristics, which will be discussed below. Thanks to PVC coating interior doors additionally receive protection from moisture, do not react to high air humidity and can be used for installation even in bathrooms, toilets and kitchens.
The doors acquire increased impact resistance, resistance to mechanical damage, scratches and chips, as evidenced by customer reviews. The cost of PVC-coated products is significantly lower than veneered ones, but higher than laminated ones covered with paper. Being in the middle price category, they have a huge resource of wear resistance and, depending on the load, frequency of use, quality of care, external mechanical and chemical influences, can last for decades, for which manufacturers have received more than once best reviews buyers.
The polymer layer prevents the destructive effect on wood texture and dyes sun rays. The product remains the same color as obtained during the production process throughout its entire service life and does not fade in the sun.
Each type of drawing of a door and its frame has a digital code, so it can be reproduced if necessary required quantity times without limit. This is important for those who want to achieve complete harmony of all interior details during the renovation process without difficulties in selecting similar patterns, or want to buy interior doors as funds become available.
A large number of colors and shades in which interior doors are made allows you to make optimal choice and, using the product catalog, find by photo suitable model for any interior.
PVC coating practically non-flammable, has high strength combined with elasticity, thermal insulation properties, does not emit pollutants or toxic substances into the air.

Decorating fireplaces with artificial stone

Model lines

Estet quality interior doors are received only by the most positive reviews buyers. It cannot be otherwise, because they not only have excellent performance characteristics and reasonable cost, but also beautiful appearance, as can be seen in the photo. The safety of the goods that the catalog contains is evidenced by certificates certifying their compliance with the requirements state standard To wooden doors, and also sanitary rules and norms, which is also confirmed by photos of documents.
The table shows some models of the Estet collection of interior doors: Prestige, Sirius, Modern, Classic, Style, Baroque, Line.
You can familiarize yourself with them in more detail by studying the product catalog with photos.

Estet doors look very harmonious in the interior. When leafing through the catalogue, pay attention to the name of the collection – it will indicate the direction of your search. Colorful photos will present each model individually, and customer reviews will complement the impression.

The door casing is designed to perform one function - to block the usually unsightly connection between the door frame and the opening in the wall. Simply put, this is a flashing that plays an exclusively decorative role - the doors will work without it, but they will at least look unfinished. Also, doors have an unfinished appearance, the frame of which in width does not coincide with the thickness of the wall in the opening of which they are installed - a wide frame can still be cut, but extending a narrow frame will only be detrimental to the appearance. This issue is solved in two ways - the box is either equipped with extensions, or a so-called telescopic platband is used, which will be discussed in this article, in which, together with the website, we will look at its features.

Telescopic trim on the door photo

Telescopic casing: what is it and how does it work?

This type of casing is practically not similar to the telescopic things that are familiar to us, and it can only be called such only conditionally - yes, it performs its functions of increasing the width, but it does not do it exactly as the concept “telescopic” implies. It does not extend - it would be more correct to say that it extends or is adjustable. At its core, this is an ordinary corner, one shelf of which, during installation, is placed in a groove at the end of the door frame - by seating the telescopic door frames in the groove, you can insert it deeper or shallower. It is due to this that the increase occurs, or more correctly, the overlap of the missing part of the door frame occurs - in fact, it is a platband combined with an additional strip.

There are two types of similar products that can easily solve the issue of lack of door frame width - these are standard telescopic door frames and, so to speak, their extended version.

In principle, both versions of such products fully cope with the tasks assigned to them - as you understand, they differ from each other only in their purpose and the presence of accessories for doors. But these are not all types of telescopic platbands - they can additionally be classified according to two more criteria, which we will talk about later.

What are telescopic platbands: varieties

The signs mentioned above, according to which telescopic frames can be divided into two more groups, are nothing more than the material from which they are made, as well as their size.

In principle, this is all that can be said about the types of telescopic door frames.

How to install telescopic trims: installation nuances

To better understand the essence of this issue and in order to avoid unnecessary problems, let’s consider the technology for installing these products using the example of an expanded version of the telescopic platband. Point by point, this process can be represented as the following sequence of work.

This is the simplest way to install a direct telescopic casing. Ask why straight? Yes, because there are also their arched counterparts, the purpose of which is to close the gaps between the opening and arched doors or just arches.

And to conclude the topic about telescopic casing, a few words about the nuances that may or may not arise during their installation. Basically, there is only one. Quite often, problems arise with the strike plate, the self-tapping screws of which simply interfere with the installation of the telescopic casing. There are two ways out of the situation - in these places, in the shelves of the platband inserted into the groove, you can make small cutouts, or you can remove everything that gets in the way and install it again after installing the platbands. The second option is preferable, since along with the canopies and the strip, the screws will simultaneously fix the platband.

Previously, installing trim for an interior door required certain measurements, patience and accuracy, but even this did not guarantee the correct and even installation of these decorative elements; in those days they did not know about the additions at all. However, modern solutions and competition in the market has a positive effect on the development of production, due to which from time to time some innovations appear on the market that qualitatively improve doors and the process of installing them in a doorway. Everyone knows what interior doors are, however, not everyone understands what interior door extensions and telescopic trims are. In this article we will dwell in more detail on each concept separately.

Telescopic platbands for interior doors
In the design of any room, everything should be perfect, especially the interior door. It is she who meets and sees off guests; it is the doors that are the first piece of furniture that a person entering a room sees, which means that the interior of the room will be primarily associated with the front door. Far from the last element of interior door decor are the platbands.

The platband is a decorative functional element with which the connection between the door frame and the walls of the room is hidden. They also decorate the doorway, framing it around the entire perimeter, except for the threshold or floor. Depending on the installation method, there are two types of platbands:

1. Traditional overhead trims
2. Telescopic trims

Overhead trims are mounted using fasteners and glue. They are simply placed at the intersection of the door frame and the wall and secured. Their main disadvantage is the complexity of installation. Considering the fact that the platbands are simply applied - they can move in various directions relative to the door, thereby violating the geometry and appearance doorway.

Telescopic platbands have a special design that does not allow them to move relative to the door, thereby maintaining the ideal geometry of the doorway, moreover, their installation is much simpler and does not require use additional tool and taking measurements. The design of telescopic platbands is ingeniously simple - there is a fastening ledge on the platband, which is located at an angle of 90 degrees to it. It is this protrusion that is inserted into a groove specially made at the factory in the door frame, thanks to which the platband perfectly follows the contour of the door and is installed without any problems.

When installing telescopic trims, special attention pay attention to the fact that fasteners door hinges will cross the grooves. In these places, the fastening protrusion on the platband is removed to the required depth using a milling cutter or similar cutting tool.

Advantages of interior doors with telescopic trims:

• Platbands are quickly and easily installed
• In some cases, platbands are great solution, allowing you to avoid installing extras
• Platbands hide all inconsistencies between the wall and the door frame
• This design makes the platbands easily removable. For example, they can be removed during repairs in order to properly and efficiently hang wallpaper or carry out painting work.
• Telescopic platbands do not require fasteners or glue, as a result - there are absolutely no traces of attaching the platbands to the doorway

Accessories for interior doors
Sometimes installing an interior door is complicated by the fact that the wall is wider than the door frame, and after installing the door inner part the opening remains unclosed. To seal this part, many people use plastic or seal the opening with plaster. However, there is a more acceptable, simple and aesthetically pleasing beautiful way seal the inner opening that remains uncovered by the door frame - install door trims.

The accessory for the door is wood panel, which is a continuation of the door frame and connects it to the platband, thereby hiding the remaining surface of the doorway underneath. The extension itself is essentially an extension of the door frame to the platband. If the door frame is equipped with telescopic platbands, then the extension must be appropriate - with a special groove for installing a telescopic platband.

Advantages of installing door panels:

• This decoration of the doorway favorably emphasizes the doors as a separate element of the interior and is as practical as plastic or plastered slopes
• If damaged, they can be easily replaced without the need for extensive repair work.
• They are more resistant to mechanical damage than plaster

Extensions are often sold complete with a door structure. If they are not included in the kit, don’t worry! There are a great variety of different accessories on the market, from which you can choose the ones you need. When choosing an accessory, you need to pay attention to their color, texture and shade of color. Extras must be in one color scheme, which will create the impression of a single door structure. When choosing an extension, be sure to take into account the type of platband; if you have telescopic-type platbands, the extension must be equipped with a special groove for installing this structural element.

Door handles on entrance doors are the most important element that controls the door structure. The functionality of the handles, the list of materials for their manufacture and the rules for selecting a door handle will be revealed.
Aesthetic balance of the door structure
The entrance to any building, especially a private home, must be guarded quality door with high reliability and burglary resistance. The entrance structure is not a simple decoration of the home and its harmonious continuation in stylistic direction home decoration. Doors must show a combination of indicators of a reliable protector:
High-quality protection from cold and other negative impacts atmosphere;
Good sound insulation, saving you from not always pleasant street sounds, protecting your state of mind.
For an ordinary question containing a list of the main components of a door input block, not many people will think that the structure does not consist solely of a frame and a door leaf with hinges. The door block for blocking the entrance combines a lot of components, including door handles are one of the most important elements.
The organism of the entrance block, if we compare it design feature with human physiology, consists of main parts:
Door panel;
Door frame;
Lock systems;
Door hinges;
Reliable door hardware;
Door handle.
An important property of the entrance block lies in the aesthetic balance of the design, because it is the first to greet guests at the threshold. Everything about the door should be balanced, starting with the color and decorative elements of its design, ending with the door handle on the door leaf. It is acceptable to incur huge costs for door block when decorating, let’s say forging, but the first thing that will catch your eye is the handle, to which the guest’s hand will reach. So to correct selection A suitable pen should be approached with the maximum level of responsibility.
Nice door should not be dissonant with the general exterior of the building’s façade. The same applies to door fittings. The handles should be in harmony with the style of the canvas and not stand out too much from the general background.
Functionality of handles
The functionality of a door handle is largely explained by its location. Regarding this feature, it is possible to divide the entire list of pens into a couple of large categories:
Stationary handles.
Push door handles.
Stationary structures are characterized by the absence of locking mechanism included in their kit. These handles are called brackets. Distinctive feature staples comes down to independence from locks. Staples are most often used to equip interior paintings office or other premises directly onto the surface of the sash. The use of a stationary handle is that you can simply grab it and open/close it door leaf, having first turned the key in the keyhole, if one is used. To secure such structures to the sash, special tightening screws are used. The stationary handle does not require more effort than just grasping it, pushing it or pulling it towards you. The density of the canvas rebate when using a staple depends on the pressing force. The staples cannot necessarily be made in a U-shape; they are:
Curved shape of the bracket;
Staples in the form of a geometric or other figure;
Staples in the form of an open loop.
Many photos on the Internet show sculptural brackets. Many photos of castles and modern houses It is permissible to note hammer handles, which also belong to the categories of staples. This season, staples in the form of pistols, shown in the photo from online resources, are fashionable. Most often, brackets are installed on sliding interior systems. For interior paintings, staples made from lightweight materials and a more elegant design are used. The staples are also used as handles for metal-plastic doors.
Push door devices are a special type, most often presented in the form of an arc, when pressed, the reed mechanism of the lock is set in motion: when you press the product, the reed of the bolt mechanism is hidden inside the panel. One type of pressure device is rotary balls called knobs, seen in many photos. design solutions interior They are produced in a wide variety of variations, starting with a regular latch, and ending with a latch with a latch and a locking system, and even with photo elements. The convenience of the knob lies in interesting design and ease of use. The downside of the knob device is that you won’t be able to open it with both hands occupied, unlike the well-known push version.
Material used in manufacturing
Door handles are the most important element from the list door hardware. The product is precisely the kind of functionality that every person has to come into contact with every day and several times. Regardless of the variety and stylistic decisions during manufacture, the opening device must be reliable and of high quality, in fact, like the door itself, because the accessibility of entry into your own home depends on them. Among other things, it must be stylish and beautiful, so that the operation process is not only practical, but also pleasant.
The fittings are manufactured by many manufacturers. During the manufacturing process it is used a whole series various materials. Here are a few of the common raw materials:
Metal: handles for metal doors are most often made from this raw material, since reliability must be reflected in all details, for example, like forged handles for steel doors.
Various alloys are used to make metal handles. The most popular is brass with its strength and fairly pleasant tactile transmitting properties. Widespread hardware made of steel and aluminum, thanks to chrome and nickel-plated coatings, the fittings fit perfectly into the design of any style.
Wood is often used in the manufacture of fittings for sauna door leaves, where a material with an acceptable thermal conductivity must be used. Carved wooden handles are worth a separate discussion; you can’t argue with monumentality and beauty.
Glass: glass products are used more as decorative element, although there are exceptions.
Plastic is used virtually everywhere to create door handles.
An important requirement for products is resistance unfavorable conditions operation, environment and physical exposure to attackers. An excellent product is considered if anodized aluminum is used in its production. It is not recommended to install fittings coated with varnish or painted. During the operational process, typical products lose aesthetic appearance.
Criteria the right choice
For front door It is worth using handles that come with durable special linings with protective properties made from alloy durable steel. Typical products will be able to successfully withstand the process of knocking out the lock cylinder. Reliable devices for input blocks must be endowed with a large strength margin and withstand a load of about 80 kg.
There are a lot of door fittings on sale today with a variety of shapes, designs and even photo elements:
Famous brands
Country of origin
Cost indicators
Armadillo (Armadillo)
China
from $17 to $202
Coba
Spain
from $60 to $400
Colombo
Italy
from $82 to $380
Palladium
Italy
from $42 to $298
MUL-T-LOCK
Israel
from $42 to $456
Guardian
Russia
from $13 to $244
The main significant criteria regarding the correct choice of handle for the entrance structure are two aspects:
Material used for making fittings;
Product cost.

Plays an important role in the design of the premises and the façade of the building. beautiful door. Gets a neat and aesthetic appearance door design at high-quality installation boxes and precise, neat installation of platbands.

What is a telescopic casing?

According to the design features, simple and “know-how” of the construction industry are distinguished - telescopic door frames. The convenience of this technology has been appreciated by both door installers and residents of apartments and houses. There were times when only wood was used as a material for their manufacture. Today, metal (aluminum, steel), plastic, MDF is used, and the surface is laminated and covered with veneer or varnished. They come in both flat or semicircular shapes and complex configurations. Their installation is the last stage of installation, decorating the door and the final stage of the entire renovation of an apartment or house (after the wallpaper is hung, the baseboard is nailed).

The telescopic platband differs from the usual one in the presence of a thin fastening protrusion on the rear edge (located towards work surface at an angle of 90 degrees), which is inserted into the box into a special mounting groove. It should be taken into account that in the places where the hinges of the door frame are attached, the fastening groove of the platbands will be covered with screws. In such areas, the protrusion is removed by right size special high-quality cutter.

Installation of telescopic platbands

Telescopic platbands provide the fastest and most convenient installation of a doorway and provide a number of advantages for installing the entire structure:

1. If the wall is slightly wider than the box, then the platband good option in order not to use extras.
2. It will hide all the inconsistencies between the box and the wall.
3. Thanks to this design, the platbands become easily removable, which makes it possible to dismantle and install them multiple times during painting works or wallpapering a wall. When removing it, it is necessary to take into account that the force when pulling it out is applied strictly perpendicular to the surface of the wall, otherwise the fastening protrusion will break off.
4. One more important advantage is the absolute absence of traces of fastening, nails, screws or glue.

The company "DM-Service" provides telescopic platbands high quality, according to European standards. The full production cycle makes it possible to carry out not only individual, but also wholesale orders. High quality, reliable