How to make a beautiful garden swing with your own hands? DIY garden swing made of metal for the country house. Schemes with photos Which tree is best for a swing

Who hasn’t dreamed of sitting on a swing in your own garden, swaying dreamily and looking at the cloudless sky or the stars? But it’s so easy to arrange, you just need to want it. Beautiful and modern, located in the garden or on the lawn, in addition to convenience, they also diversify the landscape. In this article we will talk about how to make a children's swing at the dacha with your own hands from metal and wood, and also show drawings, photos and video materials.

Swings for every taste

Of course, today's market offers many options for finished products. However, if desired, the swing can be made of any kind, for example, a children's swing, designed for light weight, including for infants. They can be as wide as a sofa, of any shape, for the whole family to relax. They can be built from metal, wood, or, in general, any auxiliary material.

Before building a swing, you need to determine for yourself its type, whether it will be used only by children or designed for the whole family. The design of their support and the type of seat will depend on this.

A swing for children should not only be comfortable, but also have especially strong and reliable fastenings.

If they are intended for a relaxing holiday, then they must meet maximum comfort, but at the same time, withstand quite a lot of weight. And when choosing the right material, you can focus solely on your taste, since both metal and wood are equally durable. Various combinations of these materials are quite suitable, plastic or plastic parts, twisted ropes, cables and metal chains are also used. These elements are designed to lighten the design and make it more elegant.

The most simple swings, familiar to everyone since childhood, are well-polished planks that are attached to a stand on ropes or cables (sometimes simply to a thick tree branch). Of course, fastening to racks is more reliable and lasts much longer. To install such a metal rack, it is best to take three pipes with a diameter of 100-120 millimeters. Two pipes will play the role of racks, and the third can be used as a crossbar on which the swing is suspended. This structure can be made from wooden beams with a thickness of 100×100 mm. However, such simplest design Suitable only for swinging children, given their low weight.

If the swing is intended for children, then it is made with a back and a fixing bar in front.

To build a simple garden swing for a summer residence, which is suitable for relaxation for the whole family, you need to make a more stable support. Typically, four support pillars are used for this. They are dug into the ground to a depth of about one meter (at least 80 cm) and concreted. Using metal structures All cut edges should be carefully sanded using grinding machine, otherwise you may get hurt on the edges. The connections between the posts and the crossbar are connected by welding (so a welding machine is required).

When used for racks wooden poles, before burying them in the ground, it is necessary to treat the pillars with antiseptic agents.

And to connect the racks to the wooden crossbar, bolts and nuts or self-tapping screws are used. A horizontal beam is attached to the top of the resulting structure (made of any material).

First of all, in order to get a seat, you need to make two frames. One frame will be the seat itself, and the second is intended for the backrest. Plywood is attached to both frames. Connect the back and seat with corners (usually at an angle of 120 degrees). It is not recommended to connect at right angles: it is less comfortable for sitting, much less for relaxing. To make armrests (optional), you need to install the bars at right angles.

After the racks are installed and the seat is made, you can begin hanging it from the top crossbar. To do this, you need to attach strong hooks or special reliable brackets to it. A cable, ropes or chains are pulled through the resulting hole. In this case, you need to choose the correct seat height. To do this, preliminary measurements are taken - the legs of a sitting person should touch the ground with their toes.

Of course, if you build a swing at the dacha in this way, then it will be hard, and it is unlikely that we can talk about proper rest. In order to sit comfortably on the seat, you can purchase or sew special pads yourself. For longer service life, they can be dressed in waterproof polyethylene covers. And if you put a garden awning on the same posts, you can enjoy relaxing in the garden in any weather.

The seat made of two small logs (diameter about 85 millimeters, length 700 millimeters, the distance between the ropes with which they are fastened is 500 millimeters) looks very original. Ropes are stretched between the logs, they are wrapped around each of them, released again and tightened into three strong knots. This type of swing is suitable for any mounting, but it is designed for only one person.

The flexible seat looks unusual in its own way. In order to make it, it is necessary to attach one special carabiner to each side of the belt of such a seat. These carabiners are also tied to ropes with strong triple knots. Thanks to this, the seat can be easily removed.

Wooden swing benches

We suggest considering making a swing that several children can sit on at the same time. If necessary, you can reduce or increase its size. Birch, spruce or pine are perfect for making. To work with this material you will need the following set of building materials:

15 boards 2.5 m long and section 100x25 mm.
1 board 2 m, section 150×50 mm.
About 40 self-tapping screws 80x4.5.
250 self-tapping screws 52×3.5.
Welded chain 5 mm, length equal to the height of the swing.
Carbine – 6 pcs.
Galvanized screw 4 pcs., 2 pcs – 12×100 mm and 2 – 12×80 mm.

As for tools, you will need:

square;
roulette;
pencil;
hammer;
hacksaw;
plane;
a circular saw;
drill and set of drills.

When purchasing self-tapping screws, pay attention to their color. It is better if they have a contrasting shade or wood color. If you purchase contrasting screws, this will give the swing an impressive look.

So, when you have everything ready, you can get to work. To begin with, it would be a good idea to prepare a drawing future design. By following the plan, it will be easier to complete the job accurately.

If you have not yet decided on the type of swing, then at the end of this article there are many diagrams and drawings that will help you bring your ideas to life. However, the designs for both children and adults are different.

By following the instructions below, you will be able to complete all the work without the involvement of specialists:

First of all, cut the workpieces 1.5 m long. In this case, the cut should be made at an angle of 90°. For the seat, you can use a board 20 mm thick, and for the back, 12–13 mm is enough. To make a seat according to our sample, you will need 17 slats 50 cm long and 15 slats 45 cm wide.
It is not recommended to tighten screws without first drilling a hole. This is especially true for pine wood. It may crack.
To make the back more comfortable, make the base details curly. To do this, use the thickest board 150x50 mm. There should be 6 such blanks, and using a pencil or marker, draw the outline of the desired shape of the blank.
The next step is to decide on the angle of the backrest. Then attach the planks at equal intervals. In order for them to be screwed evenly, the ends need to be fastened on both sides, and then the part is fixed in the middle.
It is also worth taking care of the manufacture of armrests. To do this, you can use timber of any width. Attach one end of the block to the back frame, and the other to the seat.
At this stage you can attach the chain to wooden frame. The optimal location for this is the lower part of the armrest, where it is connected to the seat, as well as the upper part of the frame base on the backrest.
The chain is fastened using a nut and washer. If you do not use a washer, the nut may become embedded in the wood and compromise the integrity of the structure. As a result, a special element, with a ring on one side and a thread on the other, is attached to the seat frame and to the crossbar on which the entire structure will be supported.
Finally, all you have to do is connect the rings with a chain, and your swing is ready.

It is best to secure the assembled swing benches on an A-shaped post. Strong logs should be used as support.

Making a stand

Now let’s look at an example of making a stand that resembles the shape of the letter “A”. This rack is quite reliable, and using strong logs, you can hang a seat of any shape, size and material. For work you will need the same set of construction tools as for making the seat. The work process consists of the following stages:

You will need to make two identical stands, with the same size, in the shape of the letter "A". As a result, they will be installed at a suitable distance, and connected at the top by a crossbar.
It is very important to accurately calculate the angle of connection of parts standing vertically. In the upper part, pillars or beams should be fastened with powerful bolts. To prevent these parts from falling apart after a while, install the crossbars at 1/3 of the height.
To do this, you can use self-tapping screws and metal corners. It’s good if there are two racks, the crossbars will be installed at the same height.
In most cases, one bar at the top of the rack is sufficient, but you can add another one for added strength.

The structure itself is installed directly into the ground. It is enough to dig a hole up to 80 cm deep. At the bottom you make a 20 cm cushion of crushed stone, insert the posts and fill them with concrete. To prevent wood studs from rotting in concrete, they can be insulated or treated special means against rotting.

If the swing will be primarily used by children, then take care of their maximum safety. All sharp corners eliminate it and that's it wooden elements sand well. Although this rule is important for swings of any purpose that are made of wood.

Metal swing

Unlike a wooden structure, a metal swing is more difficult to manufacture. After all, there is no way to do without welding machine. So, you will need a tool like this:

welding machine;
Bulgarian;
hammer;
roulette;
pipes.

We will look at one of simple types metal swing, the manufacture of which does not require great skills from you. First prepare 4 pieces of pipe, each 4 m long. In pairs, cut each end of the pipes at an angle of 28–35°. When comparing, both angles between the pipes must be equal. Concerning further work, then there are 2 directions:

Drive the pipes into the ground at the required angle. Next, weld the tops together. The result will be 2 triangles with the vertex looking at the sky. This method is considered the simplest.
This option is more complicated, so rarely anyone uses it. You should first weld the triangle by adding a crossbar at the base. Next, a hole 1 m deep is drilled in the right places. As a result of such actions, you will only have to lower the triangle into the trench. Although the construction of such a structure will require a lot of effort and time, from the technical side it will be much stronger.

As practice shows, additional load is unlikely to cause the pipe to burst. The structure will come out of the ground faster. So consider whether it's worth the time to invest in a complex support beam with a reinforced bar.

To make a beam, you will need the following set of tools and materials:

welding machine;
Bulgarian;
steel strip;
pipe;
reinforcing rod;
steel rings.

To attach the beam, you will need to make holes in the top seam of the triangular structure for a smaller pipe diameter. Use a grinder for this job. It is very important to ensure that the seam is not damaged after making the hole. If you find microcracks, make marks with chalk and, when installing the beam, weld the seam again.

A smaller diameter pipe is used as a beam, unlike racks. A reinforcing rod of the appropriate diameter is threaded inside. Even under high loads, such a structure will not burst, but will bend at most.

Next, weld 2 metal rings onto the beam. They are necessary in order to limit the horizontal movement of the chain. Between these rings a circle with a free movement made of lightweight sheet steel. The upper part of the rings in relation to the level of the beam should be 2.5–3 cm higher. Weld another partition on top. The result is a kind of tunnel. The finishing touch The finished beam will be installed in the holes made, after which the workpiece will be securely welded.

One of the last stages in the construction of a metal swing is the manufacture of a cradle. To do this you will need the following set of tools and materials:

channel or corner;
nuts and bolts;
primer;
brush/roller;
chain;
drill;
Bulgarian;
welding machine.

The size of the cradle can be different: single or double. There can also be several cradles on the beam, but in this case you will need to make several tunnels for greater strength on the beam itself. As for swings for a summer house, in most cases a sofa or a single cradle is suspended from a beam. The frame should be made entirely of metal. To do this, you can use a corner or channel.

It is much easier with a corner, since if you use a channel, you will have to select the beams/boards according to size.

It is advisable that Basic structure was square or triangular, this will prevent the workpiece from bending. Using bolts and nuts, you need to secure it to the base. wooden blocks. To do this, first make appropriate holes in the corner. This way the seat will be ready.

The next step is to install the chain. It should be attached to each corner of the cradle. Next, weld steel rings in the designated places. If they are not there, then you can get by with reinforcement or another rod. There is not much difference, the main thing is to use solid and reliable material. When the rings are ready, pass the chain through the tunnels.

If you need to remove the swing, you can use carabiners. Their presence will also allow you to change the chain without any problems.

Although some weld the chain tightly to the cradle itself. There are no rules here, it all depends on your vision of the situation.

Upon completion of all work, the entire resulting structure should be coated with a primer and painted in the desired color (the first layer of primer should be water-repellent). Pre-treat all welding seams with a grinder. This will avoid snags and injuries. So, the metal swing for the dacha is made.

Unusual

Probably on every private property somewhere there is a old tire. And in the garden there grows a thick and strong tree. If such a tire is hung horizontally on 3-4 metal chains, then several people can swing on such a swing at the same time. And if the tire is tied with one rope to a tree trunk (it hangs vertically), then one person can easily swing.

Since people with original thinking can make a swing in the country, an unusual and interesting option. This product has a ring made of durable metal. The metal ring is attached horizontally to the support using four chains. A so-called nest is made from a large number of chains in a special hoop. These chains must be attached at one end along the circumference of this hoop, and the free ends intertwine each other, and thus are fastened. To prevent the chains from scratching a person, they are wrapped in thick and soft fabric, and a special pillow is placed in the nest itself.

Video

We bring to your attention a video dedicated to a homemade swing for a summer house.

If you decide to buy a swing for your dacha, then first of all you should look in online stores garden furniture, since their prices are often lower than in regular stores. Also, if you are looking for something cheaper, we recommend keeping an eye on sales at specialized markets.

Scheme

And now, we invite you to familiarize yourself with the diagrams of swings of different shapes:

Children can play for hours on the outdoor swings. The child is attracted by the feeling of flying. IN apartment buildings swings are installed on children's playgrounds, and caring parents install them in private areas.

The simple design makes it possible to hanging swing with your own hands. Moreover, children can be involved in the design, construction or decorating process.

Outdoor wooden swing - children's joy in flight

Making swings from wood is the most common practice. This is not surprising, because they have the following advantages:

environmental friendliness;
availability of lumber;
relatively low cost;
ease of working with wood;
safety. Wood is a soft material, which reduces the risk of serious injury from a fall.

Due to the properties of wood, children's wooden swing can be found in almost any private yard or country house. In terms of mobility, they are divided into stationary and portable. Swings made of wood, unlike metal ones, are often made stationary, because the tree does not have sufficient weight for stable standing (the frame of a wooden swing requires reliable fastening).

Based on this feature, it is necessary to consider the installation location of the swing.

Where to put the swing?

When choosing a place you need to consider:

viewability. The child should be visible whenever possible;

remoteness. The economic zone and the nearby pond are not a place for games. If there are no other options for installation, you need to fence off the areas. Also make sure that the swing is placed at a safe distance from fences, walls with windows, trees, etc. flight obstacles. It is also not worth installing a swing near communications;

illumination and shading. The installation location should be light, but create shade, especially in summer at midday;

humidity. Outdoor swing wood will become unusable from excessive moisture, not to mention its harm to the child;

absence of drafts;

absence poisonous plants, allergens, honey plants, thorny bushes;

surface topography at the installation site. The installation location of the swing needs to be leveled. Then there will be no need to vary the length of the support pillars, and nothing will interfere with the child’s enjoyment of his favorite pastime;

quality of fastening of each swing unit.

How to make a wooden swing with your own hands - step-by-step instructions

To be sure of reliability, you need to build the swing yourself. Step by step guide for beginners it will allow you to indicate the right direction and construction plan.

Stage 1 - choosing the design of a children's swing made of wood

Children's wooden swings must be safe - this is an axiom! In many ways, their ability to stand stably is determined by the configuration of the support (frame). Before you start work, you need to decide which wooden swing frame will be optimal for installation. After all, its shape affects the safety of the structure and determines the place and method of its installation.

Types and types of frames for swings

U-shaped frame

It is considered the most economical model. Less lumber is used to make it. In addition, the supports do not interfere with the child’s movement and cannot cause injury due to negligence. However, for stability, the structure requires concreting of the supports, therefore it is stationary. The frame is ideal for installation on soft soil and making hanging sectional swings.

L-shaped frame

It is sometimes called an inverted "V" support. More stable compared to the previous version. This option allows you not only to hang a swing, but also to create a children's corner.

X-frame

It is a type of L-shaped, only the support beams are fastened not at their junction, but slightly lower, at a distance of 150-200 mm. At the intersection vertical bars the jumper is installed. This is a simpler way to make a support. It should be noted that such a frame requires additional reinforcement in the form of a side support.

A-frame

The most reliable of all structures, due to the jumper that strengthens it. It is this kind of frame that should be preferred if you plan to expand the swing by arranging stairs, installing a climbing rope and other elements of the playground.

Stage 2 – drawing of a wooden swing for children

Having a drawing or sketch of a swing helps determine the optimal dimensions of the structure, calculate the load, choose the right section of wood for manufacturing, determine the amount of material and parameters of the workpieces.

Drawings of a wooden swing must contain:

frame configuration (shape);

dimensions of a wooden swing. It should be noted that the dimensions of the swing are the height, as well as the perimeter of the base;

presence and installation location of additional reinforcing elements (kerchiefs, spacers);

number and type of seating (taking into account the age of the child);

type and length of suspension (ropes, chains, cables, etc.);

Can be done additional drawing with detailed breakdown and dimensions of workpieces.

The dimensions of a wooden swing are determined based on:

the age of the child - the length of the suspension, the size and configuration of the seat depend on it;

height - determines the length of the suspension.

You can make a swing “for growth”, then:

The optimal seat width is 600 mm.

seat height above the ground – 500 – 550 mm. On the one hand, this will allow you to swing and stop the swing on your own, and on the other hand, it will not interfere with skating;

height from seat to crossbar – 1,600 mm. To make it comfortable for the child to swing while standing;

the total height of the swing from the ground to the crossbar is determined taking into account the thickness of the seat.

Advice. The seat and suspension must support the weight of the child. For reasons of practicality, it is better to make a safety margin of up to 100-120 kg (several children or a child and an adult).

Stage 3 - material for wooden swings

To make a wooden swing with your own hands, you need to choose the right wood. It is better to give preference to durable types of wood - oak, larch, or cheaper ones from spruce, pine, birch. The main thing is that the lumber is dry, good quality, without falling knots, holes and other defects.

Depending on the type of frame you need to prepare:

for a U-shaped frame - timber 80x80 or 100x50 - 2 pcs. For all other types of frame – 4 pcs.;

for the crossbar - timber (log) of the same cross-section - 1 pc.;

for sitting - boards 600x300x25 - 1 pc. To make seats for children under 2 years of age, we consider additional elements– back, handles, fences;

for suspension - a welded chain with an anti-corrosion coating or a strong rope (the one used by climbers is suitable). The length of the suspension is equal to two heights of the swing. On average – 4,500 mm – 1 piece;

for fastening the frame - wood screws 80x4.5 - 40-50 pcs., as well as self-tapping screws 50x3.5 - 250 pcs.

for attaching the suspension - carbine, hanging hooks, steel corners. Quantity - depending on the method of fastening;

for wood processing (protection) – primer;

for decoration - paint or wood varnish.

for concreting racks - cement, gravel and sand (for installation of a U-shaped frame).

Tools you will need: screwdriver, saw, plane, sander, level, drill, plumb line.

Stage 4 – making a homemade wooden swing for the dacha

We move from theory to practical implementation project. Let's look at how to make a wooden hanging swing with your own hands.

Preparing a site for installing a swing

After choosing a location, you need to remove any remaining construction debris, remove thorny bushes and level the site.

Note. Some users advise concreting the area for the swing, citing the fact that in the place where children push off from the ground, a hole appears in which water accumulates. Others believe that this is the least of the troubles. After all, the fall concrete base this is a serious risk.

Preparation of lumber

Outdoor hanging swings made of wood should be safe for children. Therefore, you need to sand each workpiece to prevent the appearance of splinters. And also coat all wooden elements with primer. You can prime a ready-made swing, but then there is a risk of destruction of the wood at the joints.

Installing a frame for a children's swing made of wood

As discussed above, there are several ways to construct a frame. Therefore, let’s look at the main nuances of installing each of them:

U-shaped frame. Arrangement begins with fastening vertical racks and the top jumper. Then you need to dig two recesses (the depth is 1/3 of the height of the support). Pour a crushed stone-sand cushion onto the bottom, install a stand, pour concrete, wait until the concrete hardens, and install a suspension with a seat.

Note. The lower part of the supports must be treated with any means that will prevent rotting of the wood. The most budget-friendly and reliable option would be to use used engine oil.

L and A-shaped swing frames are usually also assembled on the ground. Procedure: saw four supports at an angle for a more reliable connection. Then attach the top crossbar to the knot. In the case of an A-frame, a crossbar is added, which makes the structure more stable. Then assembled frame installed in the prepared place. For reliability, you can dig it into the soil (pre-treated with an anti-rotting primer) or secure the lower part of the supports to the ground using a long rod and bracket.

X-shaped frame for swings. This is done similarly to the previous one. Only the ends of the supports are not sawed off, but are fixed to each other. A jumper is placed in the formed upper corners.

Note. To prevent the installed X, L and A-shaped frames from sinking into the soil, users recommend concreting the areas under the base. This eliminates the possibility of the structure being distorted and maintains its mobility.

The weak point of the X, L and A-shaped frames is at the junction of the vertical supports and the lintel. To make this unit, long self-tapping screws are used, but, as the craftsmen note, it is advisable to use a nozzle of suitable size. The photo shows this element and its installation location.

Advice. When making a frame, you need to fasten the screws in this way: first drill a hole with a diameter slightly smaller than the diameter of the screw, and then assemble the blanks onto the screw. Some craftsmen recommend gluing the joints of the workpieces for reliability, while others recommend strengthening the knot by using metal plates or wooden spacers.

Swing seat arrangement

The manufacturing method and material of the swing seat are determined by the age of the child. Children are not picky about design; they are quite happy with a seat made of tires or simple board. At the same time, you can count a dozen ways to make it.

Attaching the swing to the crossbar

A suspension (cable, rope or chain) is attached to the crossbar. A hanger is a swing unit for attaching a swing to a crossbar. The suspension bears the maximum load, which means they extend to it special requirements on safety.

Note. The seat is installed only on chains or cables, and not on wooden or metal hangers. The garden swing is designed for adults and does not require adjustment, but country swing made of wood for children needs to be adjusted as the child grows.

Attaching the swing suspension and seat can be done in several ways using different fasteners:

throw the rope over the crossbar and tie or fasten it with a staple;

using metal plates that are attached to the crossbar at the top;

using a carabiner.

Material prepared for the website www.site

By screwing an anchor into the crossbar and attaching the suspension to it.

By enveloping the beam.

Stage 5 – decorative design of the swing

Decorating a wooden swing has a dual function. On the one hand, it protects the wood from exposure external factors. On the other hand, the original design of the swing forms a beautiful and bright element children's playground. The main rule is that paints and primers must be of high quality and safe, so as not to harm the child’s health.

As an additional decoration, you can install additional jumpers on the frame, which will strengthen it, and the children will have a staircase that will be of interest to those who are waiting in line to ride.

Caring for a wooden swing

Care consists of checking:

attachment points;
suspension;
seats;
quality of paintwork.

give the swing a load greater than that for which it is designed;

avoid shock loads (sudden sitting on a seat);

try to distribute the weight along the plane of the seat (do not tilt);

roll perpendicular to the support. Hanging swings are designed for rolling along supports;

adhere to a moderate swing amplitude to avoid tipping over an unsecured swing.

Conclusion

We test the reliability of the installation of the suspension and seat, and at the same time the strength of the entire structure. If nothing was deformed under the weight of an adult, then it will support a child. However, wooden swings for a summer house require periodic inspection of the main components and attachment points.

Reading time ≈ 10 minutes

How nice it is to sit on a bench after a long day at work. And it’s even more pleasant to relax on a garden swing, which will give you gentle rocking and soothing coolness. Unfortunately, it is not always possible to buy such a design. After all, the cost of such swings is high, often exorbitant. Therefore, let's talk about how to build gardens to enjoy a pleasant stay in the fresh air.

Beautiful garden swing in the country

The undeniable advantages of garden swings. Varieties

At the dacha or in the yard country house garden swing is an indispensable attribute landscape design. Besides wonderful place for relaxation they perform many functions:

resting on them, you will easily gather your strength;
calm the nervous system;
beautiful design helps transform the entire yard;
a convenient place to work on a laptop or read books;
You can nap on them during the day (especially for children);
suitable for pleasant tea drinking and conversations with a glass of wine;
Children are helped to train and develop the vestibular apparatus.

As you can see, the advantages are really huge. Therefore, it is logical that their popularity is so high among the population. The design, in fact, is not very complicated, so even a beginner in construction can build such a swing at home.

Another advantage of building your own is that it will fully comply with your wishes. You can decorate or decorate it yourself, choose a special shape and size. The main thing is to follow the instructions during construction, then everything will definitely work out.

Before you start making a garden swing, you need to consider what they are. For example, for purpose:

for children;
for adults;
for the whole family.

Depending on the location there are:

stationary swing;
mobile swing. Convenient in that you don’t need to be attached to specific place. You can easily and quickly move it to another area.

If we talk about the main materials used, the swings are:

made of wood;
made of metal.

The design can also be very different.

Hanging.

This option is simple. All that is needed to create such a swing is a crossbar, a high-strength rope and a seat (it is better to choose one with a backrest).

Hanging garden swing

Frame.

Often used for children. They are strong and stable and easy to move. So at any time you can move the swing to the shade or another place you like.

Frame garden swing

Crafting on wood requires crafting a seat. Everything else is as simple as shelling pears. After all, making a frame in in this case no need. After constructing the structure, it must be secured to a tree (make sure that the branch you use is strong) or a beam. For fastening, a cross lay rope with a diameter of at least 24 mm is suitable (especially for swings on which children will ride).

You can replace the rope with a chain suspension. This will make the entire structure much stronger. To prevent the chain links from harming children (fingers can get caught in the links), you need to place it in suitable size plastic pipes. As an option, you can take a chain canopy with a small caliber. It is worth noting that to install a frame garden swing, you should choose the right place on the site, avoiding trees and various types of fences.

Choosing the right support

The swing support is not just a structural element, but its main component. The safety of being on the swing and the permissible amount of swinging will depend on its strength. Most often, the material used to make the support is wooden beams, metal pipes and corners. For a summer house, a support in the shape of the letter A is often sufficient. For this, a frame is built from two supporting elements. They are connected to each other by a transverse beam, which is installed horizontally. Its placement occurs at the level of one third of the column above ground level.

The crossbar itself, on which the seat is then hung, must be mounted to the racks, which are located vertically. Use bolts for fastening.

Important: metal swings must be fixed in the soil. Because in the process of swinging, the “leg” of the pipes becomes loose and turns out of the ground. To prevent this, support frames are created. As an alternative, concreting can be done in the trench.

But to secure the wooden structure more firmly, you need to bury the “legs” of the garden swing to a considerable depth (at least one meter). You can also fill it with concrete mortar. But before concreting it is necessary to carry out preparatory work. Apply to the support bitumen mastic so that the “legs” are well soaked. This will protect the wood from rotting processes. Bricks are laid at the bottom of the pit.

Video: DIY metal garden swing

DIY construction of a metal garden swing

Metal is durable material and heavy enough to ensure that the entire structure of the garden swing is strong and stable. This choice is ideal for building a swing that teenagers and adults will ride on. Also, the metal base will be more wear-resistant to heavy loads.

Metal garden swing

Be sure to use a drawing to ensure the entire installation is completed correctly. Therefore, below are step-by-step instructions so that you can build a garden swing with your own hands from metal (drawings and dimensions, photos will be provided below) in your dacha. Of course, options are selected individually. And in the photo we show only one of the possible ones.

Drawing of a garden swing made of metal

The construction of this installation begins with the preparation of materials:

cut the pipes according to the required dimensions;
burrs and sharp protrusions should be removed using sandpaper.

Form the base. To do this, the supporting elements must be fastened at an angle of 45 degrees. Then install the crossbar. It should be strictly perpendicular to the racks themselves. On at this stage You should use a welding machine to connect all the elements as firmly as possible.
It is necessary to make recesses to secure the support. Pour sand into the bottom and compact it well. Then install the support and pour over it concrete mortar. The entire structure is left for at least a week so that the solution dries well and sets.
Once the filling has dried, you can begin attaching the seat. Before installing it, you need to weld special hooks using a welding machine. The seat itself is hung on ropes (high strength) or on metal beams.
The final stage is painting all the elements of the garden swing. This measure is necessary not only to give the design an attractive appearance. By painting it, you will protect your creation from rust and corrosion. Various decorations are also possible to suit your taste and imagination.

Ready-made garden swing made of metal

If you feel that this option is not within your power, then you can stop at a simpler copy of it. In this case, you need to stock up on a regular metal profile (diameter 50 mm).

Drawing of a simple model of a metal swing

Attach special metal brackets to the drain (transversely). To do this, use bearings and a welding machine.
Install the seat on the hangers and attach it to the structure itself. Most often you can find metal rods or chains as suspensions.

A simple version of a metal swing

The creation of exclusive models looks original and attracts the attention of others. These can be forged products or swings created from channels, or rather from their trimmings. Self-made swing benches look interesting.

Wrought iron garden swing

Wooden swing

They are especially popular. After all, wood is always popular as a building material. Building a garden swing with your own hands from wood is as easy as making it from metal. Drawings and dimensions, photos from the Internet will help you. Only necessary to use suitable projects, then you will get the perfect result, and photo homemade product confirmation of this.

DIY wooden garden swing

Such designs have their advantages:

naturalness and environmental friendliness;
presentable and original appearance;
strength (in case of impregnation with specialized solutions and substances).

Drawing of a garden swing made of wood

The most suitable breeds trees are considered to be birch, spruce or pine. For construction you will need:

wooden pole – 2 pcs.;
crossbar;
rope - about six meters;
hooks or suitable hangers;
elements for fastening the structure (ideally using bolts).

if you have wooden beam, That excellent option there will be a swing on four pillars. But this design requires some attention and effort.

First you need to make a support. Two parts of the beams need to be assembled in the shape of the letter A, as shown in the photo.
After this, you need to secure the crossbar.
In order for the installation to be as strong and reliable as possible, you need to use short bars.
From the same beams you need either a seat. And don't forget about the backrest for maximum comfort.

Beautiful garden swing

Construction of a children's garden swing

The process of building a swing for children is similar to the construction of an adult version. Need detailed diagram structures, drawing dimensions and locations of elements for fastening. When using drawings for adults, be sure to optimize it for children.

It is necessary to make racks. They must be the same size.
The racks are installed at a distance that directly depends on the width of the future seat.
Both supports should be connected with a crossbar.
Particular attention should be paid to the reliability of connections. To do this, you need to measure as accurately as possible the angle at which the elements of the racks, which are located vertically, will connect.
You also need to ensure that the crossbar itself is equally distant from the ground level.
Before installation, you need to dig a trench. A special cushion of crushed stone is created in it. Supports are also installed there. After installation, everything is filled with concrete.
The entire structure is polished; the corners also need to be rounded. This is necessary in order to make the swing safe for children.

Children's swing

Your dacha will sparkle with new colors when such a swing made by on our own. It is not only useful, but also incredibly beautiful.

Fastening system

Exist various systems fastenings for garden swings, namely:

carbine - made from the following types: with a rectangular cross-section (designed for beams) and with round(for bars);
anchor - type of fastening passes through;
staples and hooks - intended for children's models;
clamps - needed for fixation in case of hanging the swing on cables.

Therefore, carefully study the features of each system. After all right choice fasteners allows you to make the swing not only durable, but also reliable.

Rope swing

The most classic models are rope and log swings. This option is considered the easiest to manufacture. To implement such an idea, you will only need to make four holes. Use a wide log as a base. You need to thread a rope into the holes made.

Rope garden swing

Using the same ropes, you need to put on the seat board. But you need to be careful. This option is not entirely sustainable. To prevent the seat from flipping over, make four holes on the side and thread ropes through them.

The ends of the rope must be tightened well and tied with strong knots. And the swing is ready to use.

Today, DIY garden swings make a chic and unforgettable impression. You just need a little patience and attention. What kind of swing will it be? Metal frame or wood mobile? It's up to you to decide, but the swing should definitely be fun. And see all the most interesting things about building a garden swing yourself in the video that you will find below.

Video: wooden swing

A comfortably swaying garden swing - it’s hard to imagine greater pleasure in the countryside. After all, the swing beckons us to take a break and relax for a couple of minutes.

We hope you will be inspired by our photo gallery of beautiful swings for the garden, where you can find both large swing beds and very small but fun children's swings.

Enjoy the view from a swing, whether it's an exotic swing over a forest cliff or a regular swing in your garden.

The swing, located in a windy area, is ideal for relaxing or just reading a book in the fresh air.

It’s beautiful if the swing is in harmony with the surrounding nature. This swing, made of branches and driftwood, is like a continuation of a small cozy terrace in the garden.

What does yours look like in the evening? Starry sky, the scent of flowers and a quiet swing on a swing with a glass of wine.

Expand your home's living space with a small terrace near your home. Create a space there with the help of a small swing where you can have fun, play, relax or just dream.

This big swing bed is about country house allow the owners to relax after a hard day, swinging on a swing and admiring the wonderful view from the terrace.

Create your little one Magic world in the country. This beautiful swing made from branches and old stumps can be a real highlight of an ordinary summer cottage.

The beauty of the surrounding nature, cozy corners your garden may inspire you to add another pleasant element to your garden life - a beautiful garden swing.

To make them look brighter, add bright and comfortable seat cushions to them.

What could be more pleasant than sitting on a beautiful swing and taking in the surrounding surroundings with your gaze?

So everyone’s favorite garden swing-bed can be made.

Garden swings allow us to enjoy the uniqueness and completeness of the current moment.

Swinging on a swing is a favorite pastime not only for children, but also for many adults. They relax, calm and bring the nerves into complete order. Currently, it is not difficult to purchase a ready-made design in a store. But it’s much more pleasant to make a swing with your own hands. The material can be wood or metal. Of course, you will need drawings. Use ready-made ones or create your own. Step-by-step instruction with photos and videos will tell you how to properly make a garden swing with your own hands at the dacha with little cost of money and labor.

Wooden or metal swing: which one to choose?

The choice of materials for making garden swings is not so diverse and is limited to plastic, metal and wood. The last two options are more popular. Therefore, let's consider positive sides designs from them.

The main advantage of garden metal swings is their durability and long-term operation. It is worth noting that metal structures can be forged, welded or collapsible. Each of the options will fit perfectly into the overall style of the summer cottage.

Advantages of wooden structures:

Ease of manufacture.
Economical in terms of material costs.
Large number of design options.
Harmony.
Safety.
Naturalness.

The last two points are most relevant to those who have small children. Environmental friendliness and non-invasiveness are the main criteria that parents should pay attention to.

Purpose

All swings can be divided into several groups according to the principle of purpose:

family type;
children's;
covered for gazebos and terraces.

Baby swing

The requirements for children's swings are always higher. So, they come with or without a frame. Those designs that have only a seat and suspension are called frameless. They are quite easy to install and remove. The main disadvantage of swings is the increased degree of injury and low level of comfort. Frame swings are much more comfortable.

Attention! One of important conditions installation of swings for children - reliable fixation of the support.

Family swing

Such a swing looks like a bench suspended from a frame. The frames are A- or U-shaped, and the side pillars are dug into the ground at least 0.5 m, filled with cement mortar. Such structures are very stable and have good strength. They can accommodate several people at once. That's why they got that name.

Swing for the terrace

The main difference between swings and others is that they have some advantages. They can be disassembled and reassembled.

Drawings: how to read them correctly?

What is the drawing for? As with any design, this is an initial project in which everything is calculated down to the smallest detail. To correctly draw up a drawing, you will need to calculate all the parameters of the swing and the amount of material required. So, to make a family-type garden swing for a summer cottage, you will have to proceed from the following parameters:

bench width for one person (from 0.4 to 0.6 m);
seat height (0.5 m);
distance from the seat to the crossbar (calculation is made individually);
For suspended structures the distance from the edge to the support post is determined as follows: 0.15–0.2 m when suspended on a chain of type 2–4 and 404;

0.25–0.3 m for others chain types suspension;
0.35–0.4 m for ropes.

Attention! With strong swinging vibrations, the seat can move in different directions and touch the supports. This is traumatic and very dangerous. Therefore, take this point into account when drawing up the drawing.

Making a garden swing: step-by-step instructions

Making a garden swing yourself - interesting and not so interesting difficult process, as it may seem. We present to your attention step by step instructions with a photo of making a wooden swing with an A-frame.

Choosing a location is the first and very important step. You cannot install a swing in a place you just like. You should choose a surface with a perfectly smooth topography. This will simplify the installation process. In addition, it is better to choose a place for installation away from prying eyes. Then it will bring peace and satisfaction.

Advice. There should be no obstructions in front or behind the swing. Such as trees, a fence or the wall of a house.

Selection of equipment and purchase of materials

For a wooden structure you will need good quality timber, without cracks or knots. Oak, birch, spruce or cedar are quite suitable. For frame base you will need:

cedar beam (10*10 cm) - 4 units. 3 each linear meters(for side supports);
cedar beam (8*8 cm) - 1 unit. 2.5 linear meters (for making the crossbar);
edged board (3*10*60 cm) - 1 unit. (for side screed).

For the bench you will also need:

cedar timber (4.5*5.6 cm) - 12 linear meters;
board for cladding (2.6*4.6 cm) - 18 linear meters;
pillows - for decoration (if desired, you can make them yourself);
suspension and fastening (chain, metal corners, hangers, bolts for furniture, various-sized screws).

As for construction tools, to make a garden swing, keep in your inventory the following necessary items:

Bulgarian.
Plane.
Screwdriver.
Level.
Electric drill.

Well, the preparatory work is completed, it’s time to start making a home-type swing.

Creating side posts

Advice. The base of the side pillars should be no less than 0.5 m wider than the seat.

First you need to calculate the upper corner of the rack.
Then you need to draw out the dimensions and work with a jigsaw.
The next step is connecting the structural parts.

It is necessary to connect the upper parts of the beams, securing them with furniture bolts.
Next, you should start working on the side ties. Externally, the racks should resemble the letter A. Therefore, you will need to mark the beams from the height of the soil.
Then the screeds are marked. The parts are cut out and fixed using self-tapping screws and corners.

Finally, 2 trapezoids of the same size, 0.1 m high, are cut out. They need to be attached to inside beams using corners.

Seat installation

To make a comfortable seat, you will need to make two frames with dimensions of 20 * 5 cm. And one more (back) - 20 * 6.5 cm.

Their inner circuit fixed with stiffeners.
Then you need to connect the backrest and seat using corners and screws.
Cover the seat with a special board.

Attention! Armrests can be installed if desired.

After this, attach the suspension to the seat using eye bolts.

Installation of a swing

Almost all the work has been completed and there is very little time left before your site will be decorated with eco-friendly and comfortable wooden swings.

Install the supporting support onto the posts using self-tapping screws.
Dig holes for the support posts.

Pour crushed stone into the holes, install stands and fill everything with concrete.
Adjust the inclination of the side posts using a level.

Attention! The angle of inclination of the side posts should be only 90 degrees. Pay attention to the depth. The supports should be dug to the same length.

Secure the posts with rope ties. They should remain in this state until the concrete hardens completely.
Before installing the garden swing wooden structure needs to be varnished.

Final stage

Check the fixation of the cross beam.

Drill holes in the beam to attach the eye bolts.
Install the seat.
The swing is ready. Enjoy the fruits of your own labors!

Garden swings are a great option for relaxation in the country. It’s especially nice when they are made by hand. Making them will take a little time, but you can enjoy the result every day!