Varieties of wooden swings, tips for making them yourself. DIY swing: made of wood and metal, for the garden, children and adults How to make a wooden garden swing

To take a little break from everyday life in a quiet and cozy atmosphere, and also to please your children, we suggest you build a swing with your own hands. After all, they not only play the role of an element of relaxation, but will also have a beneficial effect on family relationships.

Species

All swings can be classified according to the number of axes of rotation:

• With one axis of rotation. Such swings are easy to make and are the most simple option. The movement of the seat occurs exclusively back and forth perpendicular to the beam on which the structure is placed. The minimum height from the ground to the seat in this case is 35 cm.

• With several axes of rotation. IN in this case movement of the seat from side to side is added. This design is quite labor intensive. Suitable for older children. The distance from the seat to the ground is the same - 35 cm.

• With one suspension point. The elements with the help of which the swing sets in motion - a chain or rope - converge at one point under the crossbar. In this case, the distance from the ground to the seat and from the seat to the structure supports will be 40 cm.

They are also divided according to purpose:

• Mobile. This version of the play building has a simple, lightweight design, making it easy to move from one place to another. For example, in any place convenient for playing: even in the house, even outside in the shade.
• Family. They have a huge heavy structure. At first glance, it looks like a bench without supporting elements with a large backrest. This swing can accommodate the whole family. A U-shaped structure is used to fasten it, and chains or cables with excellent strength are used as fixation. This type of play structure can be covered with an awning or a roof can be built over it - and you can ride even in the rain.
• Children's. This category of swings is made in the form of boats or hanging chairs. Children will be able to ride them only when adults are nearby with seat belts fastened.

Distinction by type of structure:

• Hammocks. Fastening occurs using a metal crossbar. This can, of course, be replaced by a strong lower tree branch, provided it is straight enough. The weight that the hammock structure can withstand is about two hundred kilograms. When using this design, you can feel the flight above the ground. This option is very popular among those who like to read books.
• Singles. They have a variety of designs. No need to install an additional crossbar. The peculiarity is that it is easy to install, so this type of swing can be installed anywhere. Various materials are used for construction.
• Sun loungers. This system accommodates three people: one child and two adults. The configuration of the swing is such that its fixation is necessary only at one point, so it can be installed in an apartment. The strength of such a product, despite its apparent lightness, is quite high due to the metal alloy.
• Hanging. The design of this version of the swing is usually made of a seat and several cables or strong chains. The cable elements are fastened on each side. The dimensions of such a product are varied: they depend on the materials used. The distinctive qualities of the design are strength, lightness and comfort.

7 photos

Required Tools

Before you start making a swing, you must first prepare the required tools and materials. So, what do we need:

• File and sandpaper for metal.
• Welding installation.
• Electrodes.
• Container for preparing the solution.
• The ingredients for making the solution are crushed stone, water, cement, sand.
• Fasteners – bolts, nuts.
• Metal pipes.
• Wrenches.
• Shovel.
• Grinder with discs on a metal surface.

Preparing drawings

After all the preparatory steps have been completed, it is necessary to put the idea on paper. To do this, you need to understand what kind of swing design we will make.

Having decided on the design and type of swing, mentally imagine them in reality, as if you were already swinging on them. Now is the time to draw them. After completing the sketch, we recommend searching for similar options on the Internet. After all, the drawings can be either unique or those on which work has already been completed. It’s better not to “reinvent the wheel”, but to take it already ready-made options- this way you will save time and effort.

Below are several options for drawings with which you can independently build a swing for children.

How to make an outdoor swing

Made of wood

To make wooden swinging elements you will need the following material:

• Glued laminated timber 8x8 or 10x10 cm.
• The plywood is thicker.
• Solid wood.
• Boards.
• Chains, nuts, bolts, screws, self-tapping screws, studs.

Manufacturing process:

• Using a drill, we dig 2 holes 1-1.5 deep and 20 cm in diameter.
• We make pit cases from roofing felt.
• We throw the remains of bricks or large stones into the holes and fill them with concrete.
• As soon as the concrete has set, we install metal corners to install supports.
• Aboveground component concrete foundations must be sanded and painted in a bright shade.
• We tighten the base with screws (120 mm). To do this, first make a cut in the timber and install the studs. Using a hacksaw, we cut out the spacers and attach them to the structure with pins.
• Using self-tapping screws, we make a seat from thick plywood. We coat it with varnish and attach it to the sides of the chain.
• We make cuts in the pillars and install them on the mounted corners.
• We hang the seat.

You can learn how to make a wooden swing with your own hands from the following video.

The wooden swing is ready.

Made of metal

In order to lay the supports we will need:

• 74th metal pipe – 2 pcs.
• Bearings – 2 pcs.
• 15th pipe – 1 pc.
• Cement mortar.
• Shovel.
• Sand.
• Welding machine.
• Iron strip 7cm – 1 pc.

Support installation process:

• In thick pipes we make special holes at the top. This is necessary so that the crossbar rests on them.
• Prepare cement mortar.
• We dig holes for supports.
• We dig in the pillars and concrete them.
• On the crossbar we install 2 bearings with limiters made of steel strip. They must be welded to limit side to side movement of the bearings.
• We install the crossbar on the support. We also weld it.

Scroll necessary materials and tools for organizing seating for a new swing: Welding machine.

• Hammer.
• Screwdriver.
• Angle grinder.
• Pipe bender
• Roulette.
• 32nd pipe – 8m.
• Chain – 6m.
• Board 314x25 cm.
• Steel strip 341 cm long.
• Carabiner for chains – 2 pcs.
• Bolts for carabiners – 2 pcs.
• Coloring composition and water-repellent liquid.
• Small screws - 42 pcs.

Seat manufacturing process:

• We bend the pipes as necessary and weld the frame using a welding machine.
• Processing wooden surface water-repellent liquid and paint with regular street paint.
• We insert a wooden surface into the frame and secure it so that it holds tightly. This can be done using a metal strip, welding it in several places behind the seat: on the sides and horizontally along the seat.
• We fasten the chains with carabiners with bolts.
• Bearings and chains are also bolted together through iron strips specially bent with a hammer for this purpose. The size of the strips is about 20 cm.

Hanging

The configuration of such swings can be varied. Here are a few of them:

• Bungee– the most simple design. It is made from a rope tied at both ends. There should be a strong crossbar on top, and a plank or round crossbar on the bottom.
• Tire swing- an option similar to the previous one. Suspended both vertically and horizontally. They can be used to create fancy shapes, which gives impetus to the creative process of creating a unique swing design.
• Another option - a board or piece of tarpaulin is suspended from both sides of the edges symmetrically on two ropes or chains.
• With wide seats. This option is usually secured using four ropes or chains. Instead of a wide seat, you can use old chairs without legs, pallets and even benches.
• Soft swing. Their design resembles a hammock. They can also be made from a fabric base and wooden sticks or woven from rope.

One of the options for hanging swings will be discussed in the next section of our article.

On a spring

Manufacturing process:

• We purchase a truck spring with a height of at least 35 cm from the metal market - this will be our spring.
• We dig a hole for our spring.
• We assemble the anchor: for this we need a cross (you can use reinforcement with a diameter of 20 mm) and a pipe 50-60 cm long. These two elements must be welded.
• We fasten the anchor and spring using a boss.
• We lower the anchor into the hole, level it and fill it with concrete.
• We weld the boss to the spring. This is necessary to secure the swing body.
• We take whatman paper and draw out the necessary configuration of the body - here everything depends on your imagination. Don't forget about the handles that your baby will hold on to while riding.
• We transfer the design onto plywood and cut it out using a jigsaw.
• We fasten the body to the boss using metal strips measuring 30x4 mm and bolts.
• We paint the swing in bright colors.

You can also learn more about how to make a spring swing with your own hands from the video below.

Now you can use the swing.

We do it for home and apartment

Any homemade design, which is used at home by children, must meet certain safety requirements. This also applies to swings made with your own hands.

7 photos

Requirements:

• Material. It must be environmentally friendly. It is advisable to use natural materials. For example, wood is perfect. And in a home environment it is also a good microclimate, which will have a positive effect on the health of your children.
• Order. After the child has played on the swing, it must be removed. Stay close to him while he rides.
• Elements of the swing should not be hazardous. Hands and feet should not get tangled or stuck in them.
• Workmanship. The entire surface of the swing should be smooth - sand it in the best possible way and free from knots.

Before you start manufacturing, you need to decide on the space where the swing will be located and prepare all the materials necessary for this.

Materials that we will need to make the riding device:

• Plywood (board) with dimensions 400x400 mm for making a seat.
• Boundary strips with dimensions 400x65x20 mm 5 pcs.
• Copper tubes 4 pcs. with a diameter of 20 mm: two 65 mm long and 2 125 mm long.
• Rope 6 m long.

Manufacturing process:

• The seat board and slats must first be processed with a plane. Sharp and protruding parts must be removed.
• We drill holes in the 4 corners of the seat at a distance of 40 mm from the edges. The diameter of the holes should be 6-10 mm. The limiter strips also need to be drilled with the same distance to the edges. Let us remind you that there are only 5 of them: 2 go to the back, 2 to the sides and 1 to the front.
• We assemble the entire structure. To do this, we insert the rope through all the holes and secure it with reliable knots.
• We hang the swing and paint it.

The swing for the house is ready.

Child safety rules

Below are a few rules to keep your child safe while riding:

• If the swing design involves one suspension point, then the fastenings of its elements must be made in such a way that the rope or chain does not twist during the swing process.
• If a chain is used as hanging components, it should be covered. Unnecessary garden hoses can come to the rescue. This is necessary to prevent the child’s fingers from getting caught in the chain.
• Placing two swinging devices on the frame is not permitted. In this case, collisions between children when swinging are possible.
• Secure the landing area. Cut bark or sand will soften the blows of possible falls.
• Make sitting easy. Plastic, rubber or wood are suitable for this.
• The seat should have springy qualities. Sides covered with rubber are a completely acceptable option. This should protect children from impacts from the swing.
• There should be no plants within the perimeter of the landing area that could harm the child.
• Carefully process all wooden components with a plane, sand and apply varnish to them. This will prevent children from getting splinters and scratches.
• Drive all protruding parts in the form of bolts and nails, as well as other metal parts, into the wood.
• Among the safer swing designs, L- and A-shapes stand out. This is due to the fact that in this case the load on the structure is less than with other forms. The greater the distance between vertical supports, the more reliable the structure and the less wear and tear on parts when using the swing.
• The carabiners of hanging swings tend to wear out quickly - they need to be changed once a year. Use carabiners with plastic inserts, so they will be reliably protected from wear.
• Do not use hooks instead of carabiners. During active rocking, they can break and the child will suffer.
• It is better to lubricate the place where the rope and the fastening unit come into contact with machine oil. This will increase its service life.
• The location of children's swing options must meet safety requirements. These should be places outside of any vertical barriers: walls, fences, trees and all kinds of buildings. If there is strong swinging, there is a high risk of injury to the child. Additionally, inspect the nearby area for the presence of sharp and cutting elements - there should be none.

Today there are a huge number of accessories designed for the garden. One of them is garden swing, which will not only become an attractive element landscape design, but also very useful design. Both children and adults love to swing on swings, because this activity calms, lifts the mood and has a positive effect on human health.

Which swing is best for a summer house?

For the construction of swings, only 3 types of materials are used - wood, metal and plastic. Each person decides for himself which one to use when making a swing for his own garden. To do this, it is necessary to study the advantages and disadvantages of different models.

Main features of wooden swings:

• practicality and versatility . Wood is a material from which you can build not only the usual single swings, but also cozy sofas with several seats;
• ecological cleanliness . The tree has a natural natural origin, therefore the material is absolutely safe for human health;
• harmonious combination with the landscape . A swing made of wood fits perfectly into any garden design. This advantage distinguishes the structures from their metal counterparts, which require appropriate design of the entire site;
• safety . Wood is considered quite soft material, which significantly reduces the number of injuries received. This is especially important if children will swing on the swing;
• ease of installation . Absolutely anyone who is at least a little familiar with construction work can make a wooden swing with their own hands;
• efficiency . The monetary costs will not be large, since the material itself is inexpensive.

Characteristics of metal swings:

• durability - This is perhaps the main advantage of such products. Metal is an eternal material that will not rot or break;
• reliability such a swing is undeniable. The material is characterized by hardness and stability;
• practicality . Metal is not afraid of exposure to negative factors environment, he is not afraid of rain, snowstorms, or ultraviolet radiation;
• short cash costs . Compared to wood high quality, then the metal will cost less;
• variety of models . Swings made of metal can be dismountable, welded or forged. Every consumer can always choose suitable option specifically for your site;
• metal swing are able to decorate with their own original look any plot or garden , however, designs require appropriate stylistic design, otherwise they will not look very harmonious;
• garden swing made of metal you can do it yourself , but this will require appropriate skills and abilities.

Metal swings have many positive characteristics, however, they also have some disadvantages. For example, the dense structure and hardness of the material is good, but only on the one hand, on the other hand, the possibility of receiving various blows and injuries increases significantly. To prevent the metal from rusting, it is necessary to periodically coat it with a layer of special paint. In addition, many people believe that metal swings are inferior to wooden swings in terms of aesthetic features.

Pros and cons of plastic swings

As for plastic swings, experts find more disadvantages than advantages in them. Such children's swings for the dacha are characterized by their low cost and variety. color range. Among the disadvantages are:

• plastic designs do everything design decoration garden plot cheaper;
• Such swings are suitable only for children, but teenagers and adults will not be able to use them;
• harmful fumes are perhaps the most significant disadvantage of the material. In hot weather, plastic heats up and releases toxic substances into the air that can harm negative impact on children's health. For this reason it is better from plastic structures refuse altogether.

Types of garden swing designs

In addition to classification by material, garden swings can be divided according to the method of fastening the moving part of the product:

1. horizontal swing - such models are probably familiar to every person since childhood. The structures are long crossbars that have a fulcrum in the middle. In order to swing on such a swing, you need two kids with approximately the same weight;

1. swing with vertical suspension intended for individual use. Among such structures there are many various types: from simple bungees to solid original sofas and benches.

Swings also differ in location, and they can be placed either as part of an entire play complex for children, or stand or hang separately.

Showing your imagination, you can combine these two features in any way you like, resulting in amazing designs. For example, sofas suspended on chains, as well as circular swings resembling gazebos, are especially popular today.

No less important is the classification by size:

• product for the whole family . As a rule, they look like a bench with a comfortable high back. Several people can swing on such a swing at the same time;
• children's products with mandatory fastening belt. Such swings can be different: include a seat and a suspension, or have seats in the form of armchairs, etc.;
• portable models comfortable and mobile, they can be positioned wherever needed.

How to make a wooden swing with your own hands?

If desired, you can make a wooden swing with your own hands. It is necessary to decide in advance on the material, design and purpose. In order to decide which appearance will have the product, you can look on the Internet for a photo of a wooden swing.

To work you will need:

• wooden beams 100x100 or 50x100 mm. It doesn’t matter if the structure turns out to be massive, but you won’t have to doubt its strength;
• boards needed to construct the seat. The footage of the wooden parts is calculated in accordance with the drawing of the wooden swing;
• chain or strong ropes and carabiner;
• concrete mortar;
• nails and screws;
• metal corners.

The tools you will need are a hacksaw, a hammer, a drill, a tape measure and a screwdriver. After everything is prepared, you can begin the main process of work, which consists of the following steps:

1. Making a load-bearing support

Initially, a lower frame is constructed on which the vertical bars. The dimensions of the bars are set in accordance with the dimensions of the seat future design. All these measurements are recorded in the drawing of a wooden swing. The most optimal dimensions will be: depth - 60 cm and length - 180 cm. The frame must be slightly wider than the seat, about 50 cm. This condition is necessary for better stability and reliability of the entire structure.

After all the materials have been measured and prepared, you can begin to fasten the beams with metal corners. When making and installing a garden swing from wood with your own hands, you must also take into account the type of surface on which the structure will stand. If the swing is mounted on open ground without asphalt and concrete, then the beams from which the lower frame is made must be covered with bitumen. This composition will reliably protect the wood from rotting.

At the top points, the side supports in the shape of isosceles triangles are connected by a crossbar from which the seat is suspended. We lay out the lower part of the support, the swing platform, with boards. The side supports are installed in pre-prepared holes at an angle to each other. The supports are poured. concrete mortar Cross beams are installed. The ends of the beams are treated with resin or bitumen varnish. The crossbars are fixed with metal corners on self-tapping screws. A crossbar is installed between the side “L”-shaped posts and attached to them with large nails through clamps. The supporting structure is ready.

After the frame is ready, vertical beams are mounted on it, which will play the role of supporting pillars. Installation is carried out using self-tapping screws and metal corners. The end result will be a pair of triangles; a horizontal crossbar should be secured to their tops.

1. Seat manufacturing

First you need to assemble a frame from bars. In total, you will need two such frames: one for the seat, the second for the back. Plywood or slats are attached to these frames - it all depends on which option suits you best. The seat is also connected to the back by corners.

Experts recommend leaving an angle of 120 degrees between the seat and backrest - this is the angle that will be optimal and most comfortable for sitting. Another element for additional comfort There will be armrests, but they are not required.

Seat design diagram Seat mounting options for swing Wooden seat

1. Fastening

Hooks or staples are attached to the top crossbar. A chain or cable is passed through the holes in them. Their length is calculated so that a person sitting on a swing can reach the ground with his toes.

After this, the seat is attached. If desired, the design can be supplemented with an awning. To do this, you should build a frame from beams, and then stretch any waterproof fabric over it.

All joints are fixed with metal corners. Powerful screws are screwed into the crossbar for attaching chains. Lastly, the seat is attached to the crossbar. Ready-made swing for a summer cottage

A wooden seat will be hard, so it is recommended to place a couple of cushions on it for comfort. For long-term use of such accessories, it is better to make covers that can be updated or removed at any time for cleaning.

If you were wondering how to make a reliable wooden swing with your own hands, then you already know the answer.

Video instructions

How to make a swing from metal?

You can make a metal garden swing with your own hands, without the help of specialists. To do this you will need the following materials:

• 9 metal pipes with one diameter;
• 8 corners;
• two metal arcs with a diameter of 16 mm and a length of 25 cm;
• 2 wooden elements;
• a couple of pieces of furniture foam rubber and 2 zippers;
• cable.

Tools you will need welding machine, as well as paint for metal.

DIY metal swing - diagram Diagram metal swing Hook fastening diagram

Stages of making a swing:

1. Preparatory work. This stage is very important, since it is at this moment that all calculations are carried out, and then a drawing of a metal swing is created.
2. Making a support. Based on the calculations carried out, a drawing is created that will help you make a garden swing from metal with your own hands. The pipes are prepared for welding: the rust is removed from them, the required length is measured, and a chamfer is removed from both sides at the joints at an angle of 45 degrees.

Based on the intended diagram of the swing, it is necessary to weld the pipes. When the support is ready, arches are attached to the upper part, on which the swing will then be mounted. The structure is coated with special metal paint.

The pillars are mounted into the ground. There are 2 bearings on the crossbar. Grooves into which the crossbar fits.

We must not forget that the practicality and aesthetic appearance future product. For this reason, you should not start work if you are not confident in your abilities; entrust this task to specialists.

1. Creating a seat. The pieces of metal corner are welded according to the previously outlined garden swing pattern. Seat inserts are cut from wooden canvas, and then they are inserted into ready-made metal rectangles. For sitting, you can sew soft mattresses that will become a comfortable addition to the entire structure.

Seat parameters Backrest parameters Necessary places for welding metal parts Finished seat design

1. Installation of swings on supports. For reliability, you should use either special fasteners or a strong rope. It is important to fasten the rope well so that it stays in one place; this is done using fasteners.

Mounting the seat on a pre-prepared support Fastening on a chain It is important to pay attention to the strength of the fastenings - bolts and chains It is possible to fasten the seat to the main structure using a carabiner Fastening the seat to the support

1. Installation of the structure. It is best if the swing is located under a canopy or in a shaded place. Metal structure will be stationary, since its weight does not allow the swing to be moved.

Features of making children's swings in the country

When building a structure intended for children, some important nuances should be taken into account:

• the swing should be as strong and stable as possible;
• It is mandatory for children to have seat belts and special guards on swings;
• when making a swing, you should take into account the height and weight of the child;
• it is very important that the baby has the opportunity to reach his toes to the ground and stand up independently;
• all materials used to create the structure must be environmentally friendly, safe and hygienic.

All these conditions must be taken into account when building a children's swing for the dacha with your own hands, because only in this case can you be completely confident in the safety of your child.

How to make a swing from tires?

The swing can be made of wood or metal, however, if you want to simplify the task using available materials, then ordinary tires are quite suitable. You can attach such a product to a tree branch or place it near any body of water.

The advantages of such a design include ease of manufacture, cost-effectiveness, as well as new sensations that every person who uses such an invention will feel. In addition, to make a garden swing from tires with your own hands, you do not need any drawings or diagrams.

Stages of making a swing:

1. First you need to install two pillars, which can be wooden or metal. It is very important that the posts are strong enough to withstand all expected loads.
2. A crossbar is mounted into the upper part of the beams, and bolts with rings are cut into it, into which a rope or chain is threaded.
3. At the bottom, the rope will be attached directly to the tire itself.

Take old tire without causing any serious damage Wash the tire thoroughly, inside and out, with a cleaning solution Purchase three medium-diameter U-bolts Drill six holes (two at equal distances from each other) for the chosen fasteners Bolt holes Check in advance that the bolt holes are drilled correctly Paint the tire spray paint of the desired shade and let it dry thoroughly Now place the bolts in the holes And secure with washers on the inside You will end up with this design For the top of the swing you will need a strong chain with fasteners To create reliable design you will need four U-shaped fasteners. To each of the bolts in the tire you need to attach a fastener with a chain. On the other side, connect the chains using one fastener. Secure the two ends of a small chain intended for attaching a carabiner there. You can hang the swing in any place convenient for you!

When creating a swing from a tire, it is necessary to take into account the mass of each element, since if used wooden poles Their tensile strength is important. In general, this design is more suitable for adults or older children, but not for toddlers. For greater reliability, it is recommended to use a metal chain rather than a rope as fastenings.

Now you know how to make a garden swing with your own hands, all that remains is to choose the most suitable design, materials, and you can get to work.

Good afternoon. Today we will make a swing for a summer cottage. I decided to immediately collect in ONE ARTICLE all the variety of swings for the dacha (from simple to complex). So that you can choose the swing model that you like best.

I will NOT ONLY show ideas - we will also LET'S CONSIDER each model in detail…

And one more thing - I'll tell you HOW to attach a swing to a support beam - all 4 ways.

I will start from the SIMPLE ideas of a swing for a summer house - to more COMPLEX AND MORE INTERESTING ideas.

And the most original ideas swing for children- with slides, rope climbing frames and built-in wigwams - I put it in a separate article

So let's get started...

A SIMPLE idea - how to make a swing from a pallet.

If on your site (after delivering bricks or other... building material) there is a cargo wooden pallet (pallet) left - then it can be used as a basis for a country swing.

Needed wooden pallet(pallet) - a strong rope - and what we will hang it from. Or it will be a tree trunk. Or you can make a support on two strong pillars. We then - a little later in the same article- we will consider swing support options (and then I’ll go into more detail on this).

But... if you develop this idea of ​​a swing from a wooden pallet further... then you can make everything much more comfortable... Like this...

And if you have not one - but 2 whole pallets found in your household... then from two pallets you can make a cozy swing with a back... paint... put in sofa foam cushions... And voila 2 shabby pallets - turned into a luxurious swing for the dacha .

Of course, the pallets must first be cleaned, sanded with sandpaper (so that there are no splinters) and painted (with stain or paint) and even varnished (but preferably moisture-resistant).

How to attach such a swing – I’ll tell you at the very end of the article...

Rocking chairs are the SIMPLE IDEA of a swing for a dacha.

This is what they look like country swing.

Please note - NOT JUST boards with a hole for a rope - but saddles, which are duplicated below by two more boards. So that the rope fastening holds tighter and there is no strong friction on the rope when swinging.

I think there is no need to explain for a long time how to make such a swing yourself.

ANOTHER MODEL – a swing with a rope for a summer house.

And here is also shown HOW you can attach a rope to a swing. That is, the essence is very simple:

We make 4 cuts (we cut out grooves) - 2 grooves at the end of the board - and 2 grooves along the edges closer to the corners of the board. (it is not necessary to make the edge of the board as semicircular as in the photo - the same principle will work on a rectangular section of the board).

And then, when 4 grooves are cut, we place the rope in them in the same way as shown in the photo.

Even though slots remain open– the rope does not jump out of them. Under the force of tension, it only fits more tightly to the grooves - and is fully ensured reliable fastening ropes to the swing seat.

Swing for a summer house - made of snowboard.

Or here’s another idea for a summer cottage... Snowboards are made from very durable materials. Although such a board looks thin, it is actually very wear-resistant (it is extremely difficult to break). And therefore it can also be used as a seat for a swing in the country.

Do-it-yourself swing for a summer house, made from two logs.

And here is another variation of a swing seat - made from two logs.

In the photo above you can see how easy it is to make this swing from two pieces of rounded beams. Very simple model. We wrap two pieces of rounded logs with rope and fasten them with some tricky sea knot.

A swing made from a board - with a roll in the longitudinal direction.

But the swing model is when the roll (motion vector) is directed in the longitudinal direction. Such a rocking board can be made longer - so that friendly neighborhood and children can swing on it.

AND LET'S COMPLICATE THE TASK... now there will be more serious swings...

Country swings are made of rounded beams.

How do you like this cozy country corner?

Nice, right?

Let's take a closer look at how to make such a swing yourself.

SUPPORT – two A-shaped structures from rounded beams - (two letters A are assembled from the beams - as we see in the photo) - put them on legs and we lay cross beams on them.

And so that this beam lies more securely on our A-shaped posts, we also (see it in the back) reinforce it with additional short beams.

ROCKING CHAIR... here is an interesting rocking chair.

seat– L-shaped bench made of beams and planks + armrests made of beams.

Seat holder – also cool – it’s not a chain or a rope.

This is the same rounded beam - which is tightly attached to the seat with its lower end (in area of ​​her lower seat beam And in the area of ​​the armrest beam).

And the upper end of the beam holder has a movable fastening in the form of a metal ring. And this ring is attached with fastening carabiner the suspension support itself.

Detailed drawing exactly THIS swing is made of timber- (with dimensions and large photographs from all sides) - I posted it in a separate article... In this article you will find everything about bench-type swings.

But here is almost the SAME MODEL of the support post - but in a slightly different variation. And then an elegant lathing was added to the side of the support spreaders.

Swings for the dacha - made from rough timber.

Here's a model...

It can be made with a bench seat.

With two board seats - you get a swing into two separate places.

Moreover, note that We hang them from the same anchors on which the swing-bench hung before. This way you can hang different rocking seats on the same swing support.

Or here’s another combination for the same swing support. Combined swing with a seat-chair and a seat-board.

Fastening elements are standard for swings - chains and carabiners made of metal rings and hooks.

This is what two chains from the back and seat of the chair look like - they meet in one ring and then go to the carabiner for fastening the beam.

And here it is - a fastening anchor with a carabiner for attaching a rope (or chain)

But I got ahead of myself...

I will show you in more detail (below in the same article) 6 ways to attach a swing to a support beam...there we will dwell on carbines in more detail...

In the meantime, we continue to look at what other models there are..

Almost the SAME model - but with a continuation for another swing.

Here is a variation of this model– where the cross beam extends beyond the lateral boundaries of the support beams and a light rocking board is suspended from it.

Wooden swing with canopy.

And here is a model of a swing complemented by a canopy roof - in case of a rainy summer at the dacha.

And pay attention - there is already a ROPE HOLDER - another system of carabiners.

We will make these A-shaped swings (with supports in the form of beeches A) step by step in a separate article “Swings for the dacha - STEP by STEP we make it ourselves.”

Everything will be simple and clear there - in pictures like this.

You may also have a question...

What should I do if I want to build a swing?

but I don’t have beams - only boards?

Here's the answer - a double board easily replaces timber in terms of endurance and load.

Well, now let's talk about ways to attach the swing to the support.

HOW TO ATTACH A SWING - TO THE SUPPORT BEAM.

(6 WAYS)

Fastening the swing with a carabiner (with a girth around the beam)

Here we see photographs of fastening systems for swings - which are attached either to a rectangular beam (square girth of a carabiner) - or to a rounded beam (round girth of a carabiner).

Through fastening - with a carabiner (with drilling of timber)

Or special anchor devices for through fastening to the timber. Most of the swings from our photographs in the article are attached precisely to these anchors.

It is difficult to imagine a person who did not ride on a swing at least once as a child. Even as adults, many still love to relax and swing in the garden at the dacha, not to mention children. Many install structures bought in a store on their site, and some create country masterpieces on their own. The editors of the site bring to your attention a review from which you will learn how to create a rather popular attraction - a garden swing with your own hands: photos and drawings will be a good help in this.

Read in the article

Types of garden swings with photographs of models

Swings are divided by material of manufacture, type of construction and purpose. For example, there are designs for adults, children and the whole family. Let's look at some features various designs depending on their purpose.

Swings for adults

Swings for adults are distinguished by their simplicity and increased structural strength. They can be stationary or portable. Swings for the dacha are made from the most different materials and must withstand a load of more than 120 kg. Designs can have a variety of shapes.

Garden swing

Attraction for children

Comfortable swing seat

An ordinary (the simplest option), an old one, can be used as a seat for a swing. car tire, or a bench with a back, sofas. Structures intended for children must be equipped with special seat belts.

Hanging chairs

Attaching the suspension to the supporting structure

The attachment of the seat to the support can be rigid or flexible. In the first option, use wooden beam, metal corner or pipe. Cables, chains and ropes are used for flexible suspension.

Swing seat with chains and ropes

The flexible suspension allows you to build a swing from scrap materials and install it very quickly. The simplest option is a board and two pieces of rope, which are attached to a thick tree branch on the site or veranda. Using chains, ropes and cables, you can attach the seat to both stationary and mobile support structures. It is not recommended to use flexible harnesses for riding small children, since such structures are not stable and unsafe twisting of cables, chains or ropes is possible. To set up a swing, it is better to use chains or metal cables, since hemp ropes can stretch and sag, which will affect the reliability of the structure.

Rigid suspensions made of metal and wood

Use for hanging seats from supporting structure wooden beams, metal corners or pipes have their advantages. This option is more reliable and allows you to withstand more weight. A rigid suspension is best suited for children's swings.

How to make a swing “nest” with your own hands

"Nest" is suspended structure with round wicker seat. This swing model is also called a “basket” or “spider web”. The nest swing can accommodate 2-3 children or one adult. However, strong ropes must be used to suspend this attraction.

To create such an attraction you will need the following materials:

• climbing safety rope, hemp or synthetic cord with Ø 5-6 mm for seat arrangement;
• durable fabric and felt for exterior finishing seats;
• steel water pipe for the installation of a supporting structure;
• gymnastic hoop Ø 900 mm for making a seat frame.

Playgarden Hanging swing “Nest”

Diagram and step-by-step instructions for creating a do-it-yourself outdoor swing for a summer house

The creation of a “nest” type swing begins with the manufacture of a wicker or textile seat. If the attraction is intended only for children, then gymnastic hoops will be needed. The structure, designed for adults, is made of a steel pipe with a diameter of 16 mm and a length of 1,500 mm, which is formed into a circle on a pipe bending device. The joint is welded. Cables are attached to the frame, and the hoop is braided using the dream catcher or macrame technique. The seat cords are pulled tight to prevent sagging. The hoop is finished with foam rubber and textiles or tarpaulin.

When the seat is ready, you can begin to create the support structure. To do this, you can use a profile pipe or a thick wooden beam. The support for hanging the seat is made as follows.

1. We assemble two side A-shaped structures.
2. If the swing is stationary, then the sides are dug into the ground. The distance between the supports must be equal to the height of the structure.
3. The sides are connected at the top steel pipe, to which the seat will be attached.
4. Cables, ropes or suspension chains are attached to the crossbar. To prevent abrasion of the cables from contact with the pipe, a polyester gasket is placed under them.
5. The seat is attached to cables, ropes or chains using four carabiners.

After the structure is ready, it needs to be tested for strength. To do this, it is necessary to place a load with a total weight of about 120-150 kg on the seat. This will allow you to check the tension of the cables, the braid of the hoop, and also adjust optimal distance between the seat and the ground.

How to make a metal swing with your own hands at the dacha

Metal swings for dachas can be stationary, with a rigid structure, or collapsible. The first option is preferable because it provides greater stability, safety and reliability. However, in this case, welding skills are required. Collapsible design less reliable, since loosening of the joints may occur during operation.

Drawings of a DIY metal garden swing

We present one of the solutions for constructing a garden swing.

We invite you to watch a video on how to make a metal swing with your own hands.

How to make a swing from a profile pipe with your own hands

Profile pipe – best option for the manufacture of metal swings, especially collapsible portable structures. This is due to the fact that in this case you can do without welded joints. The swing can be easily assembled using nuts. As we already said, bolted connection less reliable than welded due to loosening during operation, but this problem can be solved by regularly checking the fastening points and, if necessary, eliminating the resulting play.

Let's consider the option of creating a metal swing for a summer house from profile pipe using welding.

Drawings for making a country swing with your own hands

Detailed manufacturing instructions

To make a metal swing from a profile pipe, you will need the following materials and tools:

• electric drill;
• square and tape measure;
• "Bulgarian";
• metal brush;
• paint brush or roller;
• 40 × 40 × 2,000 mm – 5 pcs.;
• pipe 20 × 20 × 1000 mm – 2 pcs.;
• profile 20 × 40 × 1,000 mm – 3 pcs.;
• board 20 × 90 × 1,500 mm – 7 pcs.

Illustration	Description of action
	To begin with, take two pipes and at an angle of 45°. We check the angles: internal - 45°, and external turn - 90°
	We take a piece of pipe for the crossbar, measure 700 mm from the bottom edge and mark the corners. We cut off the excess with a grinder and a cutting wheel. Using welding, we connect together all the parts of the A-shaped sidewall. The distance between the lower ends of the side pillar should be approximately 1,600 mm
	We make the second side of the swing in the same way.
	We install the sidewalls, and on them we place the upper crossbar, on which the swing seat will be attached. Checking the angles between vertical posts and cross member: they must be exactly 90°
	Additionally, we strengthen the structure with two sections of profile pipe, which we use to connect the sidewalls. It is necessary to weld two “ears” to the upper cross member for attaching the seat hangers
	Now let's start making the swing seat itself. To do this, you need to take three sections of profile pipe with a cross-section of 20 × 40 mm and attach them together by welding. Step back 100 mm from the edge and place the first mark. Next, apply marks at a distance of about 120 mm from each other
	Using a grinder, make V-shaped cuts at the marks. The outermost cuts should be made from the reverse side. After all the pipes have been cut, you need to bend the structure to the desired shape
	All joints in each pipe must be boiled, and the excess must be cut off
	Separate the pipes, weld and clean all the seams using a grinder and paint
	We attach the pipes to the cut boards. To do this, drill holes Ø 4 mm in them. We fix the boards using self-tapping screws
	It turns out this is the seat
	We attach “ears” for suspension to the upper part of the backrest to the side pipes
	We drill the edge of the pipe on the seat and install bolts for fastening to the chain
	Attach the suspension chains to the seat
	We hang the sofa on the top crossbar using carabiners

How to make a swing from wood with your own hands

Making a wooden swing for a summer house with your own hands is the best option, since you don’t need to deal with welding: not everyone has one, and not everyone knows how to use it. With a tree the situation is completely different. A wooden swing can be made by almost anyone who knows how to handle and

Solid wooden swings that match the overall style of the landscape summer cottage is a joy for children and adults. Purchased publicly available models usually do not differ in quality and variety. It is much more interesting and useful to approach the process yourself and make a country swing, giving your site a unique flavor. After all, there is nothing particularly complicated about it.

Wooden swings are divided into three main types:

• • frame, standing on stationary supports (classic version);

Frame swing

• • suspended on ropes or cables, such as “bungee”;

Hanging swings, bungees

• “scales” or balancing swings. This type of swing is for two.

Any model is played out in such a way that all neighbors will envy, and household members will choose their favorite corner of the garden or yard.

Where to place it?

If you choose the classic bungee, hang it on the nearest tree that inspires confidence in terms of strength. When selecting a location for other types of structures, it is reasonable to take into account the following factors:

• sufficient distance from walls, fences, trees, wires, thorny bushes and sharp-pointed objects;
• illumination It is advisable that the sun hits the site until the evening. So wood material insured against dampness;
• It is better to immediately select a smooth surface relief so that you do not have to carry out additional work;
• the place should not be “windswept.” Drafts are fraught with rapid colds.

It’s good if there is sand or soft lawn under the swing. This will help you avoid getting seriously injured on a stone or reinforcement if you fall.

Drawing

You can do without it. But if a serious project is conceived with a claim to long-term service, then it is better to prepare a drawing of a swing for reasons of saving material. Designing a homemade swing is not difficult.

General provisions that reflect the drawings of a garden swing made of logs:

• frame structure;
• sizes. For a swing, this is the height and area of ​​the base;
• The places of fastenings and reinforcing elements must be marked;
• quantity seats and their type;
• length of suspensions and their type.

Example drawing wooden swing

Material selection

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only ensure the durability of the structure, but also guarantee safety of use.

Species such as cedar, oak and larch will not disappoint expectations. Spruce, pine and birch are also quite durable.

The lumber must be selected dry, without traces of mold or areas of rot. There should be no falling knots, crevices, or holes made by pests. A wooden swing will not require a large volume, so you can check each board and timber.

Tools

To make a wooden swing you will need:

Strong branch on

• mixture for concrete mortar;
• nails, screws, bolts, angles (in accordance with the project);
• tape measure and plumb line;
• hacksaw;
• hammer;
• antiseptic for processing wooden parts;
• grinder (or drill with attachment);
• screwdriver

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make a garden swing from logs.

Caring for a wooden swing

1. Annual treatment with a special compound or painting will save the product from rotting and pests.
2. From the end to the beginning of the season, it is necessary to cover the swing with waterproof material.
3. Avoid rust on metal parts.
4. Do not give disproportionate loads.

Such swings will delight more than one generation, provided that these simple and understandable rules are followed.

And if they fit better into the design of your garden, then it will be more difficult to make them. But they will last you longer.