Unnecessary things, which, unfortunately, litter the environment in abundance today, can successfully serve as building materials and available material for all kinds of crafts, the main thing is to have enough imagination, desire and basic skills in handling available tools.
You may be surprised to learn what a huge variety of crafts - from basic little things to quite presentable and comfortable furniture - can be made, for example, from used plastic bottles from mineral water and drinks! With the widespread use of such containers, craftsmen paid close attention to them, effectively and often ingeniously using the characteristic shape and strength-plastic properties of the material. Separate caps from these bottles also provide many opportunities for creativity.
Fantasy manifests itself well with experience, and experience, as everyone knows, is a gainable thing. We invite you to take advantage of the available works of folk craftsmen: repeating them with my own hands, you will definitely have your own unique ideas, which, with the development of skills in working with simple tools like a construction knife and hot glue, you can perfectly implement in the material and make it an example for other novice DIYers to follow! Therefore, if you don’t yet have an exciting (and, importantly, useful!) hobby, it’s time to turn to a plastic bottle. And we will help you with advice and ideas for the first, and not only, crafts.
Tools for crafts from plastic bottles
The main advantage of such a hobby is its outright cheapness with huge creative possibilities. All you have to purchase is a convenient and high-quality construction knife, a hot-melt glue gun, an awl, scissors and, perhaps, a sheet of the finest sandpaper: for a start this will be enough, in the future you may need paints and some other materials that will also not work significant load for your personal budget. Much can still be found, as they say, under your feet and near the nearest garages - wire, colored cable insulation and so on. Over time, a useful ability develops to notice the necessary objects where an ignorant person simply would not notice them.
An important advantage of used plastic bottles is their absolute safety for health, unlike old ones. car tires. The material of the bottles does not cause allergic reactions, it is very difficult for them to get injured.
Preparatory stage of working with plastic bottles
At first, one or two bottles of the same type will be enough; for more ambitious projects, however, much more will be needed, and this the main problem, which requires time and some effort to solve. Excellent options are to involve family and friends, friends and classmates in collecting plastic bottles, who, instead of throwing them in the trash, will collect them for you. The process of collecting bottles suitable for creativity is reminiscent of preparing the right types of wood by a master cabinetmaker, who must have enough suitable material in stock.
Plastic bottles are generally considered garbage and are sent to the appropriate places - garbage cans and landfills. But in the right, creative hands, these things can sparkle with new colors. And you don’t have to be a master to breathe a second life into ordinary plastic. You just need a little patience and imagination.
The crafts are quite simple and anyone can make similar things with their own hands. Or maybe for some this business will become a real hobby.
Useful things from trash
Plastic bottles come in different shapes. They are also different in color and size. Therefore, it is quite possible to make small decorative items from them for the garden plot. And it’s quite suitable for a summer house plastic furniture or even a summer gazebo, built from the same plastic dishes.
And even caps from plastic bottles in in capable hands can turn into real masterpieces - mosaics on the walls, a hot stand, cute toys for a child and other useful little things.
Everyone can make one thing or another. Here fantasy plays the main role. After all, the material for making crafts is available almost everywhere. They can be found in parks, on lawns, near rivers and in landfills.
And by collecting them for his creativity, a person thereby cleanses nature of harmful things. After all, plastic these days has turned into a real disaster that threatens environment. This material is durable, so crafts made from plastic bottles will serve and delight you for a long time.
Where to begin
The most important thing in every decision is the action plan. In order to start working on the craft, you will need the following:
- detailed description and photo of crafts made from plastic bottles or one individual craft of your choice;
- bottles of suitable sizes and colors;
- additional materials and tools that may be useful: knife, scissors, tape, glue, paint, fabric, etc.
Then you just need to be patient and follow the instructions. And soon the children will enjoy a new fabulous playground, guests will enjoy spending time in the “almost crystal” gazebo, and the hostess will appreciate the unusual practical devices in the kitchen.
Boxes
You can make an excellent box from plastic bottles, in which you can conveniently store various small things: hair bands, buttons, paper clips. To do this, you will need two bottom parts of plastic bottles of the same size. They are connected to each other by a zipper, which is sewn along the edges.
Or a simpler option is to cut off the top of the bottle at the point where it begins to narrow. The container is ready. All that remains is to decorate the bottle using decorative ribbon, buttons and beads. They are glued with glue. Sew a fabric cap, which is tightened with a cord, and also glue it to the edge of the container.
And it’s not at all difficult to make a convenient and original container for sandwiches that you won’t be embarrassed to take to school or work. The main thing is to decorate it with intention. And it is done in just a few steps.
In the bathroom there is also a place for a plastic box in which you can put all the necessary supplies: toothpastes and brushes, washcloths and shampoos. If these boxes are hung on the wall one above the other, you can free up space.
Plastic bottles can make an unusual stand for pencils and pens. It is enough to cut it out in a circle in the shape of a cat or owl’s face and paint it. The same technique is used to make a flower vase. Just to make it stable, you should add a handful of small pebbles to the bottom.
Playground toys and decorations
To decorate children's playgrounds, decorations are made in the form of plants, animals and even insects.
For a palm tree you will need about 15 bottles Brown, from which the palm trunk is made, and 7-10 green bottles for the leaves. The trunk is assembled from bottles cut across, stringing them onto a frame made of durable rod.
To create leaves, green bottles need to be cut lengthwise, forming the desired shape. To make longer leaves, you need to attach an additional one to the main sheet using a stapler.
Decorate your garden plot it is possible even in winter time. Funny penguins in colorful hats and scarves will cheer you up on a cold winter day. You can make penguins different sizes. For one bird you will need two identical bottles, which have a “waist” at the bottom.
This bottle needs to be cut in half. This will be the penguin's body. For the second bottle you only need to cut off the bottom with a small margin - these are the legs. Connect the two parts using a glue gun and paint. Make a pompom from wool and a scarf from a strip of fabric.
Such crafts are not stable, since plastic is a very light material. In order for the penguins to stand quietly in the chosen place, before gluing the parts together, they need to be filled with sand or small pebbles placed.
Even plastic lids in skillful hands they turn into cute ladybugs. You just need to color them accordingly and glue funny eyes on them.
If the plastic lids are connected to each other with the edges in the form of a small circle, then the result will be original stand under a hot pan or kettle. This device will come in handy in the kitchen.
Flowers and plastic bottles
Flowerbeds can also be decorated in an original way using plastic bottles. If you take the bottom parts of the bottles, paint them from different colors and stick them into the ground next to each other, you can create a flowerbed that will “bloom” all year round.
The tops of bottles with caps can also be used as flower pots. They are not stable, but in the form of flower pots they will look fabulous.
Plastic bottles with a volume of 3-5 liters will make a bright flower bed-train. You need to cut out one side of each bottle. Paint it in different colors. Fill the bottles with soil and transplant low-growing garden flowers into them. Lay them horizontally and lean against each other, creating trailers.
Furniture and buildings
Construction summer gazebo will require more costs and effort. After all, for construction you will first need to make a frame made of wood or metal. The walls are built from whole bottles, which are strung on wire or rod.
First, a hole is made in the bottom of the bottle and the cap is unscrewed. A rod with stringed bottles is attached to the frame in a horizontal or vertical position.
Using bottles you can create a sofa, armchair, ottoman. Here you first need to make separate blocks: seat, armrests, backrest. Then connect them according to the design. It is better to make blocks from 2 liter identical bottles.
You need to put the lower part of another bottle on the top of the bottle (where the cap is) so that you get the bottom of the bottle on both sides. All bottles and blocks are attached to each other using tape. To make the seat soft, you need a foam block suitable size. The cover is sewn to the size of the furniture.
Photos of crafts made from plastic bottles
Plastic bottles are not just containers for water, but also an excellent material for creativity and. Some craftsmen manage to make something out of them that is difficult for many to imagine. All you need in this matter is the actual material, scissors, sometimes paint, glue and free time. It would also be a good idea to turn on your creativity and stop looking at the container of your favorite soda as an ordinary thing. So let's get started!
Piglets-pots
This craft is easy to make, so that’s where we start. You can plant flowers in this for the summer or use piglets as a container. This will revive anyone, especially children will be happy with this creation.
Tools and materials:
- Five liter plastic bottle. Their number is based on the number of piglets that will be created. 1 container – 1 pig.
- A sharp knife, a stationery knife is most convenient.
- Bottles - 0.5 l or 1.5 l, 4 pieces for each pig.
- Glue.
- White enamel and red or pink paint.
Manufacturing sequence
The container should be rinsed and dried, and if there are labels on them, they should be removed as they will get in the way. If you decide to make a flowerpot, then you should cut a hole in the upper part so that there is room to plant flowers and add soil. If you are creating a garden sculpture, skip this step.
Smaller bottles will be used to create the legs. They need to be cut from the neck by 10-15 cm or to the length that is needed.
Advice! The larger the hooves, the taller the pig will be. Moreover, containers should be selected of the same volume so that the limbs come out smooth and beautiful.
Advice! To make it more convenient to glue the legs, you should cut each neck at the widest point with a fringe and bend the edges.
Now the important task is gluing. For this you can use:
- Glue "Moment".
- Glue "Titan".
- Terpomistolet. It is the most convenient to work with, although hot silicone can deform the plastic, so it should be handled with extreme care.
Advice! It is more convenient to glue two limbs at a time, since after applying the adhesive composition they need to be held for some time for high-quality bonding. Use glue according to the instructions.
After everything has dried, you can cut out the ears; they will be made of the same material as the whole pig. It is convenient to cut them out from the lower parts, since there is a factory bulge there. The shape is natural, the size is arbitrary. For ease of gluing, you can also make a fringe at the bottom - like on the legs.
On a note! It is most convenient to glue if you are making flower pots. In this case, the cuts must be glued to the container from the inside with the same composition.
Now the creative stage - painting. Natural color – pink, but you can use another one if you wish. Experienced craftsmen It is recommended to use it, it fits well on plastic and is more durable. You only need to tint the outside, but carefully so that the color of the bottle does not show through. It is very convenient to hold it by the lid-pocket. Don't forget to cut and glue the tail, it is also made of plastic, it is more convenient to paint it before gluing. You can draw the eyes or buy them; these are sold in any sewing store.
Important! If the pig will be used as flower pot, it is necessary to make holes in the lower and side parts for the free outflow of water.
Fly agarics for garden decoration
A detailed master class on making fly agarics from bottles is on video:
For many people, regular plastic bottles don't make a big difference. Of course, now everyone has such containers and in quite large quantities, so they are simply thrown away as unnecessary. However, as today's craftsmen with golden hands show, it is in vain. You can use them to make wonderful crafts from plastic bottles, which will be not only useful, but also beautiful decorative elements. These things can decorate your personal plot, changing his appearance beyond recognition.
Crafts from bottles for the garden (+photo)
As a rule, various crafts are made, the material for which is plastic bottles, for garden plots or vegetable gardens. After all, every summer resident wants to equip his plot in such a way as to create comfort and coziness on it, and making crafts from plastic bottles with your own hands is not so difficult, or rather, quite simple. And the materials for the products do not require large cash costs, everyone always has it at hand.
Products made from bottles do not require the use of any special tools, and no skills are required to create something unusual from such material.
Tired of spending money on clay pots that constantly break - original hanging plastic pots will be a real salvation for prudent owners
With a little ingenuity, an ordinary plastic bottle turns into a wonderful bird feeder
What can be made from a plastic bottle
Plastic bottles can be an excellent material for making decorative items, intended not only for the site, but also for the house. After reading this article you will find many different examples of the successful use of this material. So, a little more about everything...
Greenhouse or gazebo
It can be built from bottles. Such buildings will not require large expenditures on various building materials, and the result will please any avid gardener.
Having a large number of polyvinyl chloride bottles, you can safely begin building a building, giving it any desired shape. Using this material, you can build not only a greenhouse or, but even.
For construction of this building You will need to follow the following instructions:
- Before you start building a gazebo or greenhouse, you need to build a frame made of metal or wood;
- After the frame is ready, holes should be made in the bottom of the bottles. The covers also need to be drilled;
- Next, through the holes, the bottles are threaded onto the wire. Next, you need to secure the wire to the frame, thus carrying out the process of erecting walls;
- You can use vertical and horizontal methods for threading bottles onto metal wire. When these methods are mixed, the structure is much stronger. To create patterns on the future walls of the structure, you need to use multi-colored bottles.
PVC bottles can be used for cultivating plants as well as vegetables. To do this, you need to cut off the top of the bottle and make holes in its bottom. Then you can pour soil into the resulting container and plant seedlings or flowers.
Manufacture original crafts from plastic bottles with your own hands, you can do it on completely different topics. By showing your imagination, you can make a comfortable chair or table for your garden that will harmoniously fit into overall design summer cottage plot. You can also build an original birdhouse or bird feeder that will not only decorate your garden, but also bring benefits.
You can use absolutely any item as a material, of which there is always plenty in any household. It could be an old unnecessary bucket, a cast iron pot, worn out car tires and much more.
Used for decoration original decor- plastic bottles can be used to make excellent containers for storing various small items
How to make original decor from a bottle
As mentioned above, plastic bottles can be an excellent material for making decorative items intended not only for the site, but also for the home.
To make the design of the site more beautiful, you can use bottles to create flower arrangements. These can be daisies, tulips, roses, cornflowers, asters, begonias, carnations and many other flowering plants.
Daisies from plastic bottles (+photo)
For example, to create daisies you will need green and white bottles. The sequence of work is as follows:
- For white bottles you will need to cut out the base for daisies. To do this, you need to cut out the side walls in the shape of a circle. The diameter of the circle should be 7 centimeters;
- The resulting circles should be cut without reaching the center. The result will be future chamomile petals;
- Next, you need to give the petals an oval shape. After which you need to warm the future flower over the fire. This way the chamomile will seem real;
- Small circle of plastic yellow color Perfect for making the core of a future chamomile. The green bottle will act as leaves and stem;
- The final stage is to combine all the elements into a single composition.
Lilies of the valley from plastic bottles (+photo)
To make your garden look more beautiful and attractive in spring, you can also create lilies of the valley from plastic bottles. This craft will look very unusual in the garden.
To create lilies of the valley you will need the same plastic white and green bottles:
- The top of white bottles is cut off. Traffic jam in in this case will play the role of a bud;
- Holes are made in the lids;
- From bottles Green colour leaves and stems should be made;
- The buds are attached to the stems with wire.
After the lilies of the valley are ready, they must be carefully placed in the ground; you can place such flowers in a small flower bed.
Vase made from a plastic bottle (+photo)
From unnecessary bottles you can create an original vase, which can be used as a decoration not only in the garden but also at home. For this we need the usual transparent bottle and sharp scissors.
- The first step is to cut off the neck of the bottle. This must be done so that the cut is smooth and without burrs;
- Next, cuts are made in strips of the same width;
- The resulting strips need to be bent outward;
- After which, the strips need to be bent, giving the vase its shape. For this you can use the same scissors.
When working with plastic bottles, you need to do everything carefully and slowly, otherwise your work may be in vain, and all your efforts will be nullified. You should also be extremely careful when using sharp tools, which can seriously injure you.
A beautiful vase is only for beautiful flowers
A white stork and a pink flamingo together is a picture that you will probably never see in nature
For making a flower vase, you can also use glass bottles. It is advisable that they have a wide neck and are made of thick glass, so they will be more convenient and practical to use.
You can decorate them with colorful wool threads and special glue. The bottle is wrapped completely, from the bottom base to the very neck, where the end of the rope is securely fixed with glue. It is best to use beads as decoration for finished products.
As practice shows, everything is ingenious, simple!!!
Broom made from plastic bottles
You can make a broom from a bottle, which will be convenient for cleaning up garbage. It is done quite simply.
- To do this, you need to cut the bottom, cut the bottle into strips to the base of the neck;
- After which the resulting broom should be placed on a handle specially selected for the width of the neck and securely fixed in place nail fastening or with a self-tapping screw.
Crafts from bottles for children
Who else, if not small children, will be delighted by various crafts made from plastic bottles, especially if they are made with their own hands. The most important thing in this matter is to find time and desire, but there is no need to worry about the material; as they say, the summer resident always has it in abundance.
Limitless possibilities of this universal material, allows you to turn even the most daring ideas and fantasies into reality.
There is probably nothing better than the mischievous laughter of children, their joy and delight. Therefore, by making various fun decorations for your kids, you are guaranteed to provide them, and yourself, with a good and fun time at summer cottage, which will give you a storm of positive emotions.
Sometimes you can take a break from plastic bottles and try to create something from other scrap materials.
Look around, use your head, ingenuity and imagination - this is exactly the occasion when you need to show your true ingenuity and creative skill.
There are many more ideas related to the use of plastic bottles that are easy to make. And the result can please everyone.
And the functionality of crafts can be aimed at various areas. The main thing is imagination, and then the plastic that no one needs will become a real work of art.
We hope that this article was useful to you and you were able to emphasize something for yourself personally. Good luck in your endeavors!
The amount of garbage that each person “produces” is growing every year. The problem is becoming global as flying plastic bags and the plastic bottles lying everywhere have become an eyesore for everyone. I’m grieving, it turns out that you can help, and even for your own benefit. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts You can make one from plastic bottles in just a few minutes. Well, or a watch... Depends on the scale.
The buildings
PET (polyethylene terephthalate) is a thermoplastic from which bottles are made. It will be useful to know its physical properties:
- density - 1.38-1.4 g/cm³,
- softening temperature (t size) - 245 °C,
- melting temperature (t pl.) - 260 °C,
- glass transition temperature (t st.) - 70 °C,
- decomposition temperature - 350 °C.
Plastic bottles are very convenient to use, but are harmful to the environment, since the polyethylene from which they are made takes more than 200 years to decompose. This same property allows the use of almost waste raw materials as construction material. Craftsmen Even houses are already being built from plastic bottles, as well as sheds, dachas, greenhouses, greenhouses, fences. Various technologies have been developed - the approach is quite serious.
How to build a house from plastic bottles
The main idea is to pour into bottles bulk material, screw them on with lids and use them as bricks. Fill the bottles with sand and soil. Sand is preferable because there is too much plant debris in the soil that can rot. It must be sifted, dried, filled into bottles, compacted well, and topped up. The result is a kind of brick.
To build a house from plastic bottles, you will need a solution that fills the gaps between the “bricks”. There are options here too. This can be a regular mortar, which is used when laying brick walls, or you can make a clay mortar. To keep the “bricks” in the wall until the mortar sets, they are tied with twine on the side of the lids. Later, these “grids” will come in handy when you plaster the walls. They turn out uneven, so you can’t do without leveling.
We make a greenhouse, barn, greenhouse
You can build a greenhouse or greenhouse from plastic bottles. In this case, only transparent plastic is used, since it is necessary for sufficient light to pass through. For the construction of a shed, on the contrary, it makes sense to choose darker plastic - it will be less visible what’s inside.
The first technology - one to one
The second requirement for bottles as a building material is an even shape. This one, you know, without recesses. Otherwise, folding the walls so that they retain heat will not work - it will “siphon” into the curly cutouts. Remove labels from bottles and dry. You also need to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse/shed from plastic bottles.
To build a greenhouse or shed, pillars are dug in the corners. Frames are assembled from timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and in finished form We attach it to the dug-in pillars. When you make the frames, don't forget the doorway and windows.
We build a frame, cut off the bottom of the bottles, and string them onto a pin. From such “columns” we assemble walls, roof
The construction process begins with cutting the bottom. We string the cut bottles onto pins, pointing the necks in one direction. We insert the bottles with force so that they become very tight. Having collected a number required height, attach it to the frame. You can fasten it with clamps, strips cut from metal, nails... In any way available to you. We press the second row against the first so that there is a slight deformation. We fasten it in this position. So, row by row, we assemble all the walls, then the roof.
Using the same technology you can make a gazebo. But here there is no need for tightness, so you can collect shaped and colored containers. This will make it even more interesting (example in the photo).
Second technology - sewing plastic
Bottles will also need to be smooth, transparent or yellow. The central part is cut out of them, obtaining a piece of plastic square shape. The pieces are sewn together into long strips. In the strip, the pieces are placed so that they curl in one direction. Then the strips are sewn into canvases. To make the canvas even, the strips are positioned so that they curl in different directions. As a result, they equalize each other. The finished canvases are nailed to the frame. This completes the construction of the greenhouse for plastic bottles.
This type of “cladding” for greenhouses withstands winters well; it does not need to be removed. Due to the firmware (many small holes), there is no absolute tightness, which allows you to regulate humidity. You won’t be able to heat such a greenhouse, but it will delay autumn for you and speed up the arrival of spring.
You can sew plastic for a greenhouse by hand, but it is not easy. It will be easier for those who have non-capricious Sewing machines. Old Podolsk machines cope with this task. There may be problems with others.
Fence and enclosure
You can make a fence from plastic bottles different ways. If you need a serious monolithic fence, you can use bottles as bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a high risk that it will collapse) - select the color of the plastic to obtain the required Rusinka. But in this case you will have to look for “building materials” of the same diameter or from different sizes lay out patterns. In general, the process is creative, no matter how you look at it.
You can also make filling for the fence from plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from shaped containers and their parts.
Furniture from scrap materials: recycling plastic bottles
Not only can you make a house and a fence from plastic bottles, they are also used as a basis for upholstered furniture. The idea is to use plastic containers rather than wood for the frame. With the lids screwed tightly on, they have a high bearing capacity, and assembled into blocks, they are quite capable of withstanding loads of up to 100 kg or more.
A bed made of plastic bottles... you need a good mattress, and the base is not too difficult to make
Although the furniture is made differently, the general algorithm of actions is the same:
- Select “building material” that is the same height and tighten the lids well.
- Collecting blocks the right size, fastening them with tape.
- Having assembled the base of the required shape, sew the cover. For softness, adding furniture foam.
The trick is to ensure that the bottles fit very tightly against each other and do not move. The slightest play can lead to destruction of the structure. Therefore, assemble the blocks slowly, carefully securing them. You can stack bottles in layers, securing each layer in several places. For inner layers it is better to use double sided tape- fixation will be more reliable.
Ottomans/banquettes
The easiest way is to make an ottoman or banquette from plastic bottles. We proceed in the order described above. We need to find bottles same height It’s better if they are the same shape - it’s easier to assemble. From plastic containers With the lids tightly screwed on, we assemble the base in the form of a cylinder. It is advisable that the radius of the base be greater than the height of the bottles - this way the bench will not tip over.
Next, you need to cut out two circles from fiberboard, which will be slightly larger than the resulting radius of the base - this is the “bottom” and the base of the seat. We secure them with tape. We take furniture foam rubber and, according to the obtained dimensions, cut out the necessary parts. We sew the cover from furniture fabric in a color that matches the interior.
Such a banquette can be not only round. It is quite possible to make it square. And so that this furniture is not too light, it can be made heavier by pouring water. But water is not very reliable. It's better to pour sand. Both heavier and more reliable.
Sofas, chairs, armchairs
If you need furniture higher than one bottle, proceed as when creating walls for a house. Find “material” of the same shape and height. Leave the first bottle intact, screw the cap tightly (you can add sand to prevent it from turning over). The bottom of the other is cut off and one is placed on top of the other. The bottle goes a certain distance and does not move further, no matter how much effort you make. If the resulting height is enough, great; if not, put on the next one. This is how you assemble rows of the required height, then fasten them into blocks.
There is another way. It is more reliable in the sense that the bottles are held not by compressed air, but by a mechanical stop. And they have double walls, which is also important. Minus - more work, more feedstock is needed. The whole process is illustrated step by step.
- Take the bottle and cut it approximately in the middle of the height (the upper part with the neck is smaller).
- We insert the upper part of the neck (the lid is screwed on) until it stops into the lower part.
- We take a whole one, the same size and shape, and insert it bottom down into the prepared structure.
- We cut the third approximately in half and put the lower part on the top (with a lid).
From such modules we assemble blocks of the required configuration, fastening them with tape. Don't skimp on scotch tape. You can first fasten two bottles together, then assemble larger blocks from the double ones.
As you understand, with this technology there are a lot of bottle tops left (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical things for the household.
Flower making methods
The most common crafts made from plastic bottles are garden figurines and flowers. Read about garden figurines There are others interesting ideas, but there are a lot of collected interesting animals and insects. And we’ll tell you about flowers made from plastic bottles below - these are probably the crafts made from plastic bottles that bring the most pleasure. The process is simple, there are a lot of possibilities, the result is amazing.
You've probably noticed that the bottom of a PET bottle looks like a flower. All you have to do is find the bottle beautiful color, cut off the bottom of it. Now you have a nice flower. In the middle you can add petals cut from the central part, a core from plastic strips cut into noodles, or glue beads inside, but more on that in a little more detail.
Using the power of fire
To work, you will need a marker, a lighter or a candle (it’s more convenient with a candle). If available, take pliers, tweezers or pliers to hold the workpiece while processing. You will also need acrylic paints, glue and beads may be needed. The entire manufacturing process comes down to a few steps:
There are a lot of options here. Just start doing it. It may not work out perfectly right away, but you will understand what and how you can fix it. Check out some more pictures from step by step photos process of making flowers from plastic bottles.
The simplest
For beginner crafters, you can try making flowers from plastic bottles simple shapes for garden decoration. In this case, you can also use milk containers. To avoid painting plastic, look for colored ones. And it doesn’t matter so much whether they are transparent or not. They can be combined to produce flowers of different shapes.
To create such flowers, use the part near the neck. It is cut to form petals. Next - warm it up a little, giving the desired bend to the petals, a little paint, the core from a melted piece with a thread (a bottle of a smaller diameter, a pharmacy bottle will do). So it turned out to be a buttercup.
Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warm up a little at the base). Make a middle whisk from the side of a milk bottle or paint clear plastic with acrylic paint.
The middle is any bright. Here is a piece of cork, but you can cut it into thin noodles, roll it up and then heat it. You will get a shaggy core.
It's all about the form... Despite the imperfections, they decorate the site
The topic is actually inexhaustible. A variety of flowers are made from plastic bottles. From simple and uncomplicated to very realistic. It's not so much a matter of skill as different tastes and desires.
Useful ideas for the home
PET containers turned out to be so good material that they make a lot of useful things. In this section we have collected useful crafts made from plastic bottles that can be used around the house.
For the kitchen and more
If you cut off the bottom of a bottle with a capacity of 2–3 liters, you get a bowl or a bowl, and so that its edges are even, they can be melted on a heated iron. But so that you don’t have to clean the sole later, use a special silicone pad. If you don't have one, you can do this through a sheet of baking parchment.
Container for food. The plastic is food grade...
From the same bottle we cut off the threaded part. There should be 1-2 cm of plastic left around the thread (we melt the edges using a well-known technology). Now it won’t be difficult to seal any package hermetically: we pass it through the cut neck, wrap it outward, and screw on the lid.
The bottom of the bottles attached to the bar makes an excellent newspaper shelf (photo on the right). You can also store umbrellas.
From plastic cut into strips you can weave different shapes containers. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. You need to cut in a spiral - the result is quite long strips. If their length is not enough, they are sewn perfectly.
Lampshades
You can even make a lampshade, but under one condition: you will use similar crafts from plastic bottles in lamps - only they hardly heat up. Plastic is incompatible with other lamps. We will describe three ways to make a lampshade from a plastic bottle.
First. You need a large capacity bottle. We draw it into strips of equal width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole and cut. The result is smooth stripes.
When the strips are cut, we also make a hole in the bottom, pass a thick fishing line through the neck, take it out through the hole in the bottom, and attach the decor to the back side. Maybe a button, maybe a pebble of a suitable color. Now, by pulling the fishing line, we get an interesting shaped lampshade. You can put a low power light bulb in it.
Another lampshade was made using a similar technology. But then they cut part of the bottle with the neck into strips, wrapped the strips and secured them to the neck. To give the desired shape The bend area can be slightly warmed over the flame of a candle or lighter. We attach the resulting “flowers” to the base. So we get an unusual design.
They also make lampshades from the bottoms. You need to find a sufficient number of identical bottles, cut off the bottom of them, and glue them together using universal glue (choose transparent). The main thing is that it glues the plastic and hardens quickly.
Flower vases
Making a vase from a plastic bottle - what could be easier... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need a soldering iron with the thinnest tip possible. Its power should not be too high. Then everything is simple: use a heated tip to burn out the patterns.
Magically! To make the drawing appear brighter, take acrylic paint and paint the resulting beauty. The paint can be in a regular can, but it’s faster and more convenient to work with a spray can.
These are the options...
Photo ideas
Crafts from plastic bottles are such a broad topic that it is impossible to talk about everything. What’s nice is that if you know a few tricks, you can easily find out how and what to do just by looking at photographs. So here we have collected a few ideas that we found interesting.
You can even make a boat...
And this is just decoration...
