No matter how new your home is and no matter what material it is built from, it still needs good protection. Also, be sure to close it too insulation materials, which do not tolerate open interaction with the external environment and moisture. That is why it is important to choose one of the many different finishing materials, which will best suit you on all counts. Despite the fact that the market offers tiles, stone finishing, newest synthetic materials etc., decorating a house with a block house on the outside is still in fashion.
Block house photos of houses
Previously, we have already talked about how to renovate a village house, in this same article we will talk about how to sheathe a house with a block house, as well as how to actually decorate a house with a block house.
Preliminary preparation
As in any other form construction work before covering it is necessary to carry out preparatory work. By the way, it is worth noting that the best period for covering a house with a block house is at least a year after its construction. So, first you should make sure that all the work on thermal insulation of the house has been completed. In case of cladding wooden house outside the block house it is necessary to caulk the joints between the logs. Otherwise, after covering, you will not be able to properly insulate the house, and it will remain cold.
The next step will be the selection of materials necessary for covering the house with a block house. This type of cladding consists of many layers, including:
- vapor barrier film
- sheathing
- thermal insulation
- counter-lattice
- windproof film
It should be noted here that when using a block house to decorate the outside of a house, wooden and brick houses the vapor barrier film will be superfluous, so you don’t have to use it.
As for the thermal insulation material itself, it must be based on the materials of the house, the thickness and density of the walls. For example, 15 centimeter walls require 10 centimeters of insulation. But at the same time, if the house is covered with a block house, then a layer of insulation with a thickness of about 5 centimeters is sufficient.
The timber for the sheathing is selected exactly the same thickness as the thermal insulation, since their thickness must exactly correspond to the calculated dimensions in order to achieve best effect. The lathing with inserted insulation is covered with a film protecting from the wind and then covered with a counter-lattice.
This design provides high level thermal insulation as well as perfect ventilation natural type, due to which the house will be dry and warm.
Choosing a block house
The choice of a block house, in fact, is influenced only by the size and material from which the board is made. Typically, a general division of the block house board into two categories is used:
- wide board (width over 15 centimeters)
- narrow board (width less than 15 centimeters)
A narrow board is usually used indoors, and a wide one is used outdoors, since wide boards provide better protection from the wind. However, due to this, the price of a wide board is slightly higher.
In terms of material, the best boards For a block house, larch boards are considered, which has remarkable properties:
- high strength
- not affected by moisture
- not subject to rotting
- has a long service life
In addition to larch, you can use pine; it has more modest characteristics, but will provide great opportunities for use as a block house.
Regarding the length of the board, you can give the same advice as regarding the width - long boards are better, since the fewer joints, the better the protection.
From the above tips we can conclude that it is better to use more expensive and reliable materials that will last much longer.
Facing a house with a block house
Of course, there are many subtleties outlined above and this is only a small part related to the choice of a block house. Now we’ll talk about what stages await you when repairing the facade of a private house, as well as possible difficulties when working with him.
The first trick that will help avoid dust accumulation in the joints of a house block is to place the boards with the groove down and the tongue up. Since dust will not accumulate in the groove, the block house will last longer and will not lose its appearance. In addition, it is necessary to make a small gap between the block house and the ceiling and the block house and the floor. This technique will help create natural ventilation internal lining, which will also extend its service life.
To fasten the casing, you should choose powerful fasteners that are not subject to corrosion. For example, galvanized or anodized screws are suitable in the best possible way. They will hold up the block house perfectly and will not spoil the appearance with rust.
Nuances of block house protection
So, the block house paneling of your house is complete. Now the question arises of processing the boards so that they do not lose their appearance and properties, and can serve you for many years. Varnish coatings protect well from atmospheric influences; you can also use special types paints. When painting, it is worth considering that no matter how dry the wood is, it still gives off moisture, which is why, when shrinking, cracks and white stripes appear at the joints of the boards. To prevent this, simply paint the tenon and groove of each board with the same paint before assembling the sheathing. paint coating, which you will use to paint the remaining surfaces of the block house.
In addition, you must carefully follow the instructions of the paint manufacturer, properly prime the surfaces before painting, and observe the temperature conditions.
As you can see, covering a house with a block house not only makes your home more beautiful, but also perfectly protects the internal insulation components from external influences. Knowing simple rules, You can easily get good result finishing works and you will enjoy the look of your home for many years.
A block house (shaped like a rounded log) is relatively inexpensive compared to a log house and is quite in demand natural material, moreover, its use in conjunction with various insulation materials guarantees a modern and durable home finish.
Cladding the outside of a house with a block house contains a similar technology for insulating the facade of a bathhouse, summer house or cottage and cladding it with wooden, venyl or metal siding. Facade finishing with a block house is a valuable investment in protecting the house: increasing the atmospheric stability, strength, reliability of the structure, plus additional heat and sound insulation!
The cost of finishing the house with a block house
The price consists of the volume and level of complexity of the required work on installation of sheathing, installation of an insulating layer, steam/wind barrier and other processes. The foreman in charge of our facilities will make the necessary measurements free of charge, provide calculations and an expected work plan. In case of project coordination, the final amount is agreed upon individually, taking into account the % discount.
| Name of external works | units change | Price (RUB) |
|---|---|---|
| Full façade cladding process |
||
| Finishing the facade of a turnkey block house with painting | m 2 | 800 rub. |
| Complete window finishing (slopes, ebbs, etc.) | pcs. | 2000 rub. |
| Facade cladding in parts |
||
| Installation of block house panels | m 2 | 350 rub. |
| Installation of sheathing device | m 2 | 150 rub. |
| Installation of the counter-lattice device | m 2 | 100 rub. |
| Installation of a steam/wind barrier | m 2 | 50 rub. |
| Installation of the insulating layer | m² | 100 rub. |
| Installation of internal/external fillets | linear meters | from 80 rub. |
| Installation of ebb tides | linear meters | from 160 rub. |
| Framing window and door openings | linear meters | from 250 rub. |
| Treatment with antiseptic impregnations | m 2 | 50 rub. |
| Application of decorative impregnation, paint and varnish materials(1 layer) | m 2 | 70 rub. |
| Mounting drainage system(gutter, pipe, outlet) | linear meters | from 300 rub. |
Why is it worth finishing a house with a block house?
Block house is an environmentally friendly product, resistant to mechanical damage and not subject to deformation due to temperature fluctuations. Treatment with special antiseptic impregnations and the application of protective paints and varnishes ensure the preservation of the texture and natural beauty of the wood. Thanks to this coating, the finish becomes moisture resistant without being subject to rotting processes for many years.
Block house facade cladding is also famous for its good thermal insulation properties: air gaps, contained in the fibrous structure of the material, provide minimal thermal conductivity, which is why the house is warm and cozy in winter, and pleasantly cool in summer.
Calling our specialist will help you make an accurate calculation and selection necessary materials By the right sizes, determine the scope of work, solve technical nuances.
Volume discount
up to 10%Technology of facing a house, cottage, bathhouse with a block house
The cladding of the façade with a block house is carried out on the sheathing pre-installed on the outside after the preparatory work stage. During the preparation process, craftsmen clean and level the surfaces, create a sheathing structure, and install an insulating layer with a vapor/wind barrier.
Installation of the counter-lattice will provide a ventilation layer between the insulation and the cladding of the block house. The tongue/groove locking configuration allows the panels to be tightly mated when facing walls, preventing moisture from entering.
COMPLETED WORKS
Would you like to visit our facilities and verify the competence of our craftsmen? No question!!! Just call or leave!
Such material as block house, which until recently was not yet known to the general public, is gaining increasing popularity in our country. Has high technical indicators, therefore it is used more and more among consumers.
Decorating a house with a block house can be done both from the outside and from the outside. inside. By appearance it will resemble natural wood trim.
Exterior decoration house block house.
Positive aspects of using a blockhouse
Since the block house is made of natural materials, its advantages are undeniable:
- Due to its high environmental friendliness, this material does not produce harmful emissions in environment, so they can be used to cover walls both outside and inside the house.
- Despite its lightness, the material is quite durable. Therefore, it will not create additional loads on load-bearing structures buildings.
- Since the material is made from wood, it acts as a good sound insulator and perfectly protects against sounds from the outside.
- When the inside of a house is decorated with a block house, a special microclimate appears in the room. And the woody smell can have a beneficial effect on others.
- Simple installation of finishing material that does not require special skills and tools.
- Attractive appearance and large selection various material options. This allows you to bring any design solutions to life.
This modern finishing material looks very impressive together with other finishing elements registration And you can be convinced of this if you look at the photo of the decoration of houses with block houses.
Buildings clad with a block house exterior will always attract attention. Looking at them, you create a feeling of comfort, coziness and reliability. Therefore, in order to find out better what it looks like, the cladding of houses with a block house photo will help you figure it out.
Components of the structure
Before you start choosing material for cladding your home, you need to understand all the intricacies of such a design. Cladding from a block house includes the main components:
- sheathing, an element located between the wall and the immediate sheathing. It acts as a base for fasteners and is usually made from wood.
- vapor barrier, a special protective layer that protects the insulation from moisture.
- insulation material, the thickness of which is usually more than 10 cm. Foam plastic or mineral wool is used for it.
- counter-lattice, a necessary element to provide space between the block house and the windproof film. It is necessary so that the elements of the block house do not begin to rot.
- external finishing, the block house itself.
Different types of block houses, their features. The first thing people pay attention to when choosing this profile for finishing is the material from which it is made. The leaders among materials for the manufacture of finishing profiles are:
- wood,
- metal,
- vinyl panels.
Wood profiles are manufactured using the following technology:
- logs are cut into blanks,
- then they are placed in a drying chamber,
the blanks are kept in it for about 14 days. If you neglect to use the chamber, it will take about six months to dry them.
This material requires frequent paint treatment. Thus, its service life increases.
Metal sheets and their features:
- a metal house block can be made of one or two logs,
- its body is coated with zinc, and the thickness of the steel is usually more than 0.5 mm.
- on the inside the plate is treated with a primer, and on the outside - with an imitation representing wood,
- Such structures are durable and highly durable. Withstands changes temperature conditions, not afraid high humidity, does not respond to changing weather conditions.
Vinyl panels have special protective elements, which make the material stronger compared to wood. And also, it is more profitable due to its inexpensive price, and the color variety of profiles will satisfy the desires of any customers.
Choosing material
In order for finishing your home with a block house to bring as few difficulties as possible, you need to pay attention to the following details:
- when finishing the facade, it is better to use boards at least 15 cm wide and of the same size,
- The longer the board is, the fewer joints you will get. The best option is considered 6 m,
- for finishing the facade of a block house, it is better to use softwood, for example larch,
- the denser the material, the longer the service life it can withstand,
- when choosing wooden planks, special attention should be checked for defects. There should be no cracks, knots, rot or mold,
- humidity indicators building material should not exceed 20%,
- Also, the material must be packaged with high quality, without any damage.
Compliance with these standards will ensure the maximum service life of the cladding.
Decorating a house with block panels
The interior lining of the rooms of a block house does not differ much from its exterior finishing, with the exception of some points:
- inside the house it is necessary to use boards of small width,
- All corners require mandatory fixation after installation.
Such panels are best used for rooms with low humidity, otherwise they require varnishing.
Block house in the interior wooden houses will look very harmonious, complementing the overall style of the room. To develop such a design, there are different ideas, and the photograph taken will better help you make your choice.
Exterior decoration of the house
If installation is carried out using wooden panels, then the progress of work will be as follows:
- All wood parts are processed special solutions, preventing rotting and increasing their fire resistance.
- The vapor barrier is attached to the walls using a construction stapler.
- Next, the sheathing is nailed down using self-tapping screws or dowels.
- The resulting cells between the sheathing are filled with insulation.
- An additional sheathing is attached to the resulting frame, onto which the house block is subsequently mounted.
After the preparatory work is completed, they begin to directly decorate the house with a block house.
The fastening of the boards is horizontal, and it starts from the bottom up. The panels are fixed using self-tapping screws or clamps. The first board is inserted into a special fastener, and the subsequent ones are already put on the tenons located below the part of the sheathing. This process continues until all the walls of the house are covered.
When the house, finished with a house block, is ready, casings are installed on the window and door openings. What they will be depends on the style in which the entire house is made.
To ensure that the block house panels last as long as possible, they are treated with special coatings, both inside and outside the house. Coating requires updates approximately every 6-8 years.
When the moment comes to choose what material is best to decorate the room with, a block house, among others, will have significant advantages. Since today it is possible to use various modern technologies, a room decorated with these panels will look attractive and original, and will also have a beneficial effect on residents due to its environmental friendliness. The main thing here is to clearly and correctly comply with all requirements for installing structures. And then anyone, even a novice master, will be able to cope with this task with his own hands.
Video: decorating a house with a block house
Since ancient times, houses in Russia have been built from wood. Wood is an amazing material that creates an atmosphere of comfort and coziness. Today, the market for construction and finishing materials offers wooden block house panels. Cladding a house with a block house gives the building a presentable appearance and an impressive design. A block house allows you to provide high-quality protection for your home at a low cost.
Advantages of block house panels
Block house panels have a semicircular outer side, which in appearance resembles a rounded log. There are two grooves on the back to relieve tension and provide ventilation. Most often, such panels are made of spruce, larch or pine.
Coniferous wood species are highly durable.
The panels are widely used both for external facade decoration and for interior decoration premises.
When evaluating the façade cladding of a block house, the following advantages should be noted:
- Favorable visual perception caused by natural wood finishing.
- The mechanical strength of the material allows it to adequately withstand external influences: small stones, sand, and accidental impacts.
- If damaged, the material can be easily restored by grinding.
- Installation of house cladding with a block house is simple; it can be completed without special skills in a short time.
- Panels provide additional insulation Houses.
How to choose the right block house?
Panels may vary in appearance and technical specifications. It is very important to choose the correct board width. For external cladding it must be at least 150mm. The boards should be the same.
- The facade will look attractive for a long time if you use conifers wood, as they are highly resistant to decay. Larch and pine, due to the increased resin content in the wood, have water-repellent properties. These species contain natural antiseptic components, which protect the wood from mold and rot. The strongest and most durable cladding made from larch panels. The pine block house has the most affordable price. It is not recommended to use a spruce block house for external cladding, since this material does not have sufficient strength. It can only be used for interior decoration.
- Less commonly, deciduous wood is used to decorate the facade, for example, alder, oak, birch. They are quite expensive, but such material can be ordered individually.
- Wood from northern regions has greater density and durability. Externally, this can be determined by the distance between the rings - they are smaller.
Block house façade cladding technology
After purchasing the panels, they should be kept outside for some time without packaging to “acclimatize”.
“Acclimatization” is necessary for the material in order to avoid its shrinkage in the future.
For installation you will need:
- block house,
- corner and molding boards,
- timber for sheathing,
- dowel (dowel),
- level,
- antiseptic and brush,
- wood hacksaw,
- sandpaper,
- drill,
- hammer,
- screwdriver and screws.
- Facial and inner surface, as well as tenons and grooves must be treated with an antiseptic. After you apply the first layer, roughness and irregularities will appear on the surface that need to be sanded down.
- After which a second layer of antiseptic should be applied. Currently, there are a number of antiseptics on the construction market that can protect the surface from exposure sun rays with different shade and color. Using them, you don’t have to paint or varnish the panels in the future.
- The sheathing is installed on a pre-cleaned, flat wall using a level. Pre-concrete and brick walls need to be covered with a special waterproofing layer. The wind- and moisture-proof film should be attached to the bars with metal staples using a stapler.
- Can be used as a sheathing wooden beam 30x30 mm. We attach it to the wall vertically using a screwdriver and self-tapping screws. Between the bars you need to maintain a distance of up to 60 cm.
- Insulate the building. Sheets of insulation can be installed between the sheathing beams. They are fastened with special dowels and nails. Cover the top layer of insulation with a layer of waterproofing, securing it with double-sided tape.
Used for fastening panels various ways fasteners:
- staples;
- nails;
- self-tapping screws;
- clasps.
It is best to use self-tapping screws for this purpose - this will minimize the possibility of deformation of the skin due to changes in humidity and temperature.
- From below we begin to install the casting board on the screws. We begin the installation of block house panels from the bottom row. Wooden panels are positioned strictly horizontally with the tenon facing up.
- We fit the panels tightly to the casting board and secure them with self-tapping screws. We drill a hole to a depth of 15 mm. The hole must be made so that it coincides with the diameter of the dowel (wooden plug from the same board). It is better to use a dowel made of hard wood; its size may vary. Universal diameter 25 mm.
- Then we screw in the self-tapping screw and close the hole with a dowel. Its cut is cleaned and painted to match the wood tone or a little darker. Before installing the dowel, it must be covered with a layer of PVA.
- Subsequently, the block house panels are installed using groove/tenon fastenings and secured using self-tapping screws. When installing, it is very important to place the panels with the tenon facing up, which prevents dust from getting into the groove and moisture accumulation, and hence their long-term preservation. It is imperative to maintain an air gap between the thermal insulation and the outer panels.
Important nuances
- In order to join the boards at the corners, they can be cut at an angle of 45 degrees. or use a corner board.
- If the length of the wall exceeds the length of the panels, then they are joined using a bar with a thickness equal to the thickness of the panel. In this case, the facade is well protected from the wind and looks more aesthetically pleasing.
- If small gaps form during joining, they are closed with jute rope.
Features of caring for external cladding
In order for wooden panels to serve for a long time, it is necessary to take measures to protect them from external influences.
To prevent the appearance of a white stripe when the wood dries out, the tenon before installation is coated with the same solution (varnish or stain) that will be used to cover the facade in the future. You can get acquainted with the material about.
Using stain, you can highlight the texture of wood or give it the desired shade.
First, the surface is primed, and then the panels are covered with colorless paint or varnish.
After the coating has dried, the surface must be sanded.
After sanding, a final layer of paint or varnish is applied to the surface. To panels for a long time looked beautiful, for coating you need to choose high-quality materials with long term services. But still, periodically, after seven or eight years, you will have to renew the coating. It is advisable to apply the same tone, the same paint or varnish, otherwise, before applying a new coating, you will have to completely remove the old one.
Installation of a block house (video)
Block house cladding options
Today, cladding the facade of a house can be done not only wood panels block house, but also plastic (vinyl) and metal. In each of these options, the result is a facade that is almost impossible to distinguish from a natural log frame.
Metal block house panels “under a log” are an inexpensive material that is resistant to corrosion, as they are made of galvanized steel with a special coating. I have panels rounded shape, externally resembling a rounded beam.
A vinyl block house also has a number of advantages. He:
- Easy to care for.
- Durable.
- Frost-resistant.
- Not prone to corrosion.
- Has a presentable appearance.
- Vinyl siding not only accurately imitates the color of wood, but also its texture.
A wooden house in a “rural” area looks as natural and attractive as a brick house in the city. Especially when the material for the walls is rounded logs. But the log is not cheap, and a lot of time must pass before the house shrinks and it can be carried out finishing work. Therefore, other materials and technologies are often used. And in order to create a reliable imitation of a log house, they choose a block house for the exterior decoration of the house.
Block house as a type of facade lining
According to its purpose, method of fastening and connection, a block house is a type of “lining”.
In essence, the production technology can be represented as sawing out a beam from a rounded log, as a result of which four “slabs” with a regular spherical surface will remain - they serve as a blank for the block house. All that remains is to cut the tenon along one long side, and trim and cut out the groove on the other. And of course, grooves must be made on the wrong side to relieve internal tension in the wood.
In addition to the above, there is a technology for manufacturing from “standard” lumber - boards or timber. But due to the large amount of waste, its cost will be higher than that of the traditional one.
This type of cutter is used to cut a block house from timber or boards
If we talk about grade, then there are no domestic standards for this type of lumber. But in practice, manufacturers have developed their own classification, according to which there are three “pure” options and two “mixed” ones.
“Pure” options are A, B, C.
Grade “A” differs from “B” in the number of healthy knots per 1 m, their permissible diameter (15 mm versus 20 mm) and the absence of “black” knots and cracks. For grade “B”, small and short cracks are allowed, plus a small amount of “black” but not falling out knots.
Grades “C” and “BC” are not used for finishing houses; they are suitable for building fences or finishing outbuildings somewhere in the backyard.
Cladding board is just lumber - the requirements for its quality are the same as for other work
For the exterior cladding of a block house, panels with a thickness of at least 30 mm are used. And due to the characteristics of massive lumber, it is almost impossible to find a “perfectly” clean block house 4-6 m long, so the “mixed” grade “AB” appeared. In addition, even when storing lumber, minor defects in the form of shallow cracks may appear.
Sometimes there is another classification, borrowed from European manufacturers: “Extra” (“Prima”), “A” “B” “C”. If we draw parallels, then “Extra” will be the “pure” grade “A”.
With such a length, it is impossible to find a panel “without a hitch”, but for façade cladding it is not necessary
Advice! Since there are no standards for block house, manufacturers are free to assign any grade to their products. Therefore, when purchasing, you need to make sure that the declared quality meets your requirements.
Wood selection criteria
Even Block House vinyl siding has certain characteristics that indicate the quality of the façade panels. Wood is a “thinner” material, and in many respects the right choice durability depends external cladding. Therefore, it is not enough to assess the suitability of the variety - the density, resistance to moisture and strength of the wood are important.
To decorate the house with a block house, only coniferous species are used. Hardwoods (linden, oak, ash) are used for interior lining walls
Larch is considered elite material and its qualities a priori correspond to outdoor operating conditions: high humidity and exposure to precipitation. The density and strength of Russian larch, like that of a northern tree species (after all, it grows in Siberia), will also be at a high level.
Larch has dense and durable wood, so it is not for nothing that it belongs to the elite of coniferous species
With pine it is not so clear. Most of all for facade finishing northern pine is suitable - its strength and density are much higher than that of wood from warm regions. And the origin of a pine block house is determined by the distance between the annual rings - the closer they are to each other, the better. The quality criterion is at least three rings per 1 cm of end cut.
On our website you can find contacts construction companies, which offer the service of finishing and insulating houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
How to choose width
There are criteria for choosing the diameter of a rounded log depending on the purpose and size of the house.
During construction big house seasonal residence (dachas, summer house) use a log with a diameter of up to 220 mm, the visible part of which lies in the range of 150-180 mm.
For a “full-size” heated house, the minimum log diameter is 240 mm, the recommended one is 260-280 mm. And the visible part is 190-210 mm.
To maintain “proportions”, the width of the block house must correspond to the visible part of the log:
for a cottage – 140-150 mm (with a thickness of 28-36 mm);
for a large house - 190 mm and above (with a thickness of 36-45 mm).
Sheathing options
The only way to install a block house is by vertical lathing with horizontal panels.
Lathing is needed in any case. Even when they sheathe wooden house, and it is possible to attach the panels directly to the wall, you need ventilation gap to ventilate moisture (otherwise the wood will begin to rot).
The issue of insulation is decided depending on the seasonality of residence and wall materials. If this is a “summer” house, then insulation is not carried out. It is also possible not to mount thermal insulation materials when the house is built according to frame technology or from foam concrete blocks 40 cm thick.
Sheathing during the construction of a “frame”, as another option for using a block house
In other cases, wall insulation is mandatory - the costs will quickly pay off due to savings on heating and air conditioning.
Installation features
Despite belonging to the lining, the methods of fastening to the sheathing when cladding a house externally with a block house are different than when carrying out internal work.
Inside, narrow modifications of panels of small thickness (up to 20-22 mm) are used, and operating conditions are characterized by stable humidity and temperature. Therefore, the block house can be fixed to the sheathing using fasteners hidden installation- Kleimers. Exterior finishing is carried out with a thick and wide cladding board, in which, when humidity changes, such internal stress forces arise that it can simply be torn out of its grip.
For a clear overview of the block house finishing, watch the video:
The second reason that does not allow the use of clamps for outer skin– method of placing a block house on the facade. The groove into which the bracket “clings” should face down (so that moisture does not get into it). And with this orientation, installation of panels on clamps can only be done from top to bottom.
That's why external cladding carried out in one of two ways:
Open. The panel is screwed to each beam at two points - from the groove side and closer to the tenon. Before fastening, holes are drilled into which screws are screwed in with force so that their heads do not protrude above the surface of the panel. Then these places are puttied, disguising them as a small knot. This installation method is the most reliable and is recommended for thick and wide house blocks.
Hidden. The bottom panel near the groove is fixed open method, plus holes are drilled at the base of the tenon at an angle of 45° into which self-tapping screws are screwed. Each subsequent row of block house (except the last) is fixed only through a spike. The top row is fastened in an open way.
Note. Due to fluctuations in humidity, the tree changes its size across the fibers - it swells or shrinks. Therefore, it is necessary to ensure that during installation there remains a small gap between the groove stop of the upper row and the tenon of the lower one. If workers miss this nuance, then over time the wall will deform.
Design features
Cladding the facade of a house from a block house is more difficult than from imitation timber or plank. The reason is in the features of “bulk” lumber. Panels with a radius surface are more difficult to adjust to each other.
The most accurate way to increase the length is to “counter” cut the house block at an angle of 45°.
But more often a simpler option is used - a strip in the form of a slats or boards. The place for it is chosen in such a way that it looks natural and is common to all connected panels.
Strip strips and corners are the easiest way to cover joints
Corner connections are also designed in a similar way - by connecting through a cut at a corner or by an overlay of two slats.
The final stage of cladding is sanding the surface and coating with varnish or colorless paint.
For examples of façade finishing with a block house, see the video:
