Table for summer cottage- not just a piece of furniture, it is a ritual place where all household members invariably gather. In the summer, no one wants to go indoors to drink tea or have lunch. In the fresh air, your appetite is better and food tastes better. In order not to drag furniture from home for get-togethers, you can do outdoor table for the dacha with your own hands, at the same time taking care of the benches.
garden table with built-in bench
A country table does not imply a complex design, so assembling it will not be a problem even remote from carpentry and creative works personalities. We will present to you several very simple and at the same time original ideas its creation, perhaps something from what we have proposed will become a decoration for your site.
Material for country table
DIY garden table: interesting ideas
Conclusion
Photo gallery - DIY garden table:
the garden table must be durable
Outdoor furniture is subjected to serious testing, so it must be made from durable materials. Specifically for the table you can take:
- Stone.
- Tree.
- Metal.
- Available materials.
The tables from the latter look especially interesting. But first things first.
Wooden table
outdoor dining furniture set
Selecting material special attention pay attention to the type of wood. There are different boards and boards and, in our case, not all are suitable for use. Pliable and easy to work with conifers, alas, will not fit. In addition to the fact that they need special impregnation, because they are too fire hazardous, the resin they release will spoil the tablecloth and dishes.
The necessary elements must be looked for among hardwood blanks. On the tabletop you need to assemble boards with a thickness of 30-50 mm. For added strength, they are stuffed onto a frame. The legs of the structure can be saddled straight or X-shaped. It is important to process all the details well so that there is no danger of driving a splinter while wiping the table. It is mandatory to treat the finished product with protective impregnations.
folding wooden table IR at the dacha with your own hands
In order to make a table “for centuries”, cover it with varnish, and do this, as they say, without sparing the brush. The composition must be literally rubbed into the wood, and this will only be possible if you slightly heat it in a water bath. The varnish coating is made in three layers.
Stone table
a round table and benches made of stone will last for decades
you want to do monolithic structure that amazes the imagination and creates a special mood for meals - try working with stone. You can create this type of table for your garden with your own hands or buy a finished product. Stores offer a wide range of granite and marble options. There you can also select benches made of similar material to go with them.
To breathe life into an old table, all you need to do is tiling the tabletop
It won’t be cheap, but if you really want to have such luxury in the garden as stone table, try to make it cheaper. Lay out the bases of the benches and table yourself. This will work quite well for this:
- Flagstone.
- Brick.
- Modern blocks.
- An ordinary cobblestone.
table made of stump, lined with stone
It will be much easier to fit these materials into the overall concept of the garden and combine them with existing buildings. It is quite possible to take it on the tabletop, seats and backrests artificial stone. The composition will not lose its view from this.
Metal tables
Those who are comfortable with iron and have a welding machine on hand may be interested in the option of metal furniture. The products are elegant and aesthetic, with openwork decorative inserts. The metal table will also need to be protected from premature destruction. This is done by priming the metal before final painting.
round garden table with stone top and shaped metal legs
Forged tables will satisfy the needs of respectable owners, but it is impossible to make them with your own hands. Such designs are ordered by professionals. Forging requires the conditions of a forge. However, considering that products of this type can be wonderfully combined with wood, stone, glass, you can only purchase a forged base for the table and complete it with a tabletop yourself.
DIY garden table: interesting ideas
Styling the table and chairs to look like a mushroom meadow will create some zest in the landscape design summer cottage
If you are determined to work on creating a country table yourself and are ready to make it non-standard, look at the “unnecessary” things available in every shed. Perhaps among them there are items that can become consumables for creativity.
Assorted assortment
No less practical option For a country table, along with wooden, metal, rattan, and stone products, there is a “hodgepodge” of all sorts of things. This creation will become a multi-colored “character” of your garden and will never go unnoticed. What is it made from? You won't believe it! Your starting materials will be:
- Broken flower stand.
- Metal barrel lid.
- Scraps of colored plastic or round glass.
timber set
Take a sheet of paper and try to draw a circular pattern on it in the spirit of Moroccan style. Enlarge your creation to the required size. A photocopier will help you do this quickly.
We place the resulting blank under glass and draw lines with a copper outline. Let it dry for a day or a little less. The manufacturer indicates the recommended drying time.
It is enough to decorate the sides of benches and chairs with wheels to get original garden furniture for your cottage
Now it’s time to paint the marked glass with stained glass paints. The main thing here is that the colors are located evenly within the area allocated to them. If you have never worked with specific paints, it makes sense to practice on a separate piece of glass in order to understand how much you need to use for high-quality painting of fragments. The completed painting must also be thoroughly dried.
The finished glass can be additionally decorated with elements drawn with a copper outline.
Cover the lid of the barrel with white paint, which will hide traces of rust, and proceed to preparing the main part of the tabletop.
garden table made from a basket of firewood
The metal part of the flower stand, which will serve as a supportDIY garden tableneeds to be primed and painted acrylic paint copper color and partially patinated.
Once the footboard is ready, seal the areas where it touches the glass with window sealant. This is necessary for its better fastening.
Now the final stage. Put all the pieces together: arrange glass table top into the lid and place the composition on the stand.
It may not be very comfortable to dine at such a table, but drinking coffee in the cool of the evening will be very pleasant.
By decorating an ordinary tree stump with mosaics, you can get an original table
Pallet models
After construction country house you probably have at least a few pallets left on which packaged bricks or building mixtures. You don’t even suspect what a lifesaver this is for decorating your dacha. With their help, the table will be ready in a few hours, and it will look such that it will not be a shame to place it not only in the garden, but also in home interior. In this case, note that you will not even incur any special financial costs.
garden table made from pallets
A table for a garden, made with your own hands from pallets, can be constructed in several ways. For example, for the most simple option you will need:
- Screwdriver.
- Brushes.
- Sandpaper.
- Swivel wheels.
- Colored antiseptic stain.
- Screws.
mobile table for a garden made from pallets
First of all, start sanding the pallet. At the first stage of removing the rough layer, use coarse-grained sandpaper; fine-grained sandpaper will be needed for final processing. If you have a grinder in use, the configuration of which includes grinding wheel, use it instead of rolls of sandpaper. This will speed up the preparation process.
master class on making a table for a garden with your own hands
Turn the tray over and attach small casters to the bottom. This is done using ordinary screws. For greater reliability of fastening, place under the last washers, which can be removed from similar screws used for working with metal tiles. Don't ignore this advice. The wheel bases have fairly large holes, and a screw without a backing will not be able to properly secure the part to a wooden surface.
step-by-step process of making a table
Now all that remains is to open the finished product with a wax-containing antiseptic. If you want to highlight the tree structure, use transparent composition. To add color you will need a stain. You can style the table:
- under oak;
- larch;
- rosewood;
- nut;
- pine
A low, wide table would be appropriate on the veranda, in the attic room, or in the interior of the bathhouse.
without additional processing the table will last at least two seasons
If you want to make your summer recreation area more comfortable, make not just a table from pallets, but a whole set country furniture, supplementing it with permanently fixed benches. Such a kit can be made portable and, if necessary, moved from the barbecue, say, to the pool or to the pergola.
bright table made of pallets for the whole family
A creative option for a country setting would be a pallet transformed into a tabletop and equipped with vintage legs left over from an old chest of drawers, table, or cabinet. This detail needs to be highlighted in a contrasting color.
You can use such furniture in the bedroom, gazebo, or on the terrace.
Reel table
Vertical planks allow you to place various items
“The coil itself is heavy, but it’s easy to construct a lightweight version from it table for the dacha and again, do it yourself »
Cable spool is also an excellent material for creating country house design. Look at it – it’s almost a finished table! A little decor and it's ready to use. The easiest way to decorate a reel is with twisted twine. To do this, simply wrap it tightly around its trunk. The upper disk of the structure is sanded and varnished. If you want to add functionality to the product, install vertical slats around the circumference. They can also be decorated with rope. With the advent of crossbars, you can store the necessary items under the table.
reel table with umbrella mount
The coil itself is heavy, but it’s easy to use it to construct a lightweight version of a table for a summer house and, again, do it yourself. You will only need the top disk from the product, which will act as a tabletop. The frame frame for its installation can be made of metal.
If in shady garden If you find a stump of suitable height and strength, then it can also be converted into an improvised table using a reel disk. This idea will be good not only for a playground; it can also be rationally used when organizing a relaxation corner for adults. By sawing a wooden disk in half, you can assemble original chairs, which can also be placed on stump legs. This will make a nice garden set.
a table made from a reel can be decorated with any pattern
Wood table?
Why not? This brutal option can decorate a barbecue area or even a living room. Work is nothing at all. Finding the old thick log, saturate it with stain and level the lower part, giving the product stability.
table on wheels made of stump
A mobile table made of hemp is no less simple to manufacture and attractive in design. By the way, its functionality can be expanded if you are not too lazy to sew a foam seat on it, which will allow you to easily transform the structure into a comfortable pouf.
Not in short supply at the dacha and chopped firewood. Using them, it’s also not a problem to quickly build a comfortable table design for your garden with your own hands. Assemble a flat base and secure the split timber into the tabletop with a strap tie. Put it all down and enjoy communing with primeval nature to the fullest.
table for a living room from an old log
Garden composition made of tires
Take your time to get rid of old tires. You can make them great landscape decor expanded functionality: use the table not just as a table, and the pouf next to it not only as a pouf, but also create a place inside them for gardening tools, for example.
table and chairs are made in one designer style from old tires
Paint the tires in a color acceptable to you, dry them, fold them into a column, holding the elements together silicone sealant or other suitable composition.
Now work on the table top and seat. It’s a good idea to make the first one from durable plastic or cut it out of wood. For the pouf, also cut out a plywood disk of slightly smaller diameter than the tires, glue foam rubber to it and cover it with fabric. The removable parts are ready.
Cooking table
mobile table made from old quartz with a wooden tabletop
Did you find grandma's brew in the bins? Fabulous! Let's transform it into a mobile storage table. We equip the bottom with wheels, and for the upper part we assemble a tabletop from boards. Having cut the boards to size, we assemble them together on cross bars, the length of which must correspond to the diameter of the weld. This will help the tabletop stay firmly in place and not move to the side or tip over at the slightest load. There will be enough space inside the makeshift table to organize a mini-bar.
Using the same principle, you can convert empty boxes, barrels, etc. into useful items.
original table with large metal wheels instead of legs and built-in benches
Conclusion
As you can see, assembling a garden table with your own hands is a very exciting and absolutely not labor-intensive task. Here, even beginners will not have to be afraid of ruining something, because the work will be done with items and elements that are initially unsuitable for direct use. Try your hand at something that is unfamiliar to you. Perhaps the final results will become an incentive not to stop there, but to go further. From the presented materials you can make many more unusual and useful things in your country life!
Photo gallery - DIY garden table:
In modern conditions small apartments It’s quite difficult to give free rein to your imagination and purchase pieces of furniture that would suit everything. Among other things, it is quite difficult to find interior elements that would be attractive not only in design, but also in price. These two problems can be solved using the method self-made wooden furniture. This could be, for example, a table. You can do it by preparing everything necessary materials and tools. This piece of furniture can be used both in the kitchen and in the living room.
Preparatory work
In order to make a wooden table with your own hands, you will need to prepare some materials. Will need furniture board, the thickness of which is 19 millimeters. This material is highly durable and looks very attractive. Shields on preparatory stage It will be necessary to mark, and then cut out blanks from them. It is important to stock up on the necessary fasteners for assembly. Thus, you will need to prepare 6 boards that will make up the lower support. Their size is 19 x 100 x 965 millimeters. There will be 4 legs, their dimensions are 19 x 215 x 680 mm. The same amount of leg molding will also come in handy, but the dimensions of these elements should be 1938 x 470 mm. The tabletop supports will be blanks with dimensions of 19 x 125 x 610 mm. You can make a wooden table for a gazebo with your own hands to the same dimensions. The master must prepare two dowels for the legs with dimensions of 10 x 32 mm. Two lintels with dimensions of 19 x 140 x 1100 mm should also be highlighted.
Additional items
You will need a steel tie in the amount of two pieces, its size should be 150 mm. The tabletop will be limited to the following dimensions - 19 x 1020 x 1900 mm. The tabletop plank must be cut in two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, ties, and dowels will be used as fasteners.
Preparing tools
It will be impossible to make a wooden table with your own hands if you don’t stock up electric jigsaw, circular saw, hacksaw, drill with drills, plane, milling machine, file, clamps, brush. To attach the parts you will need carpenter's glue; the wood can be treated with sandpaper. The table will look good if you treat it with polyurethane varnish, which can be glossy or matte.
Manufacturing technology
If you decide to make a wooden table with your own hands, then you need to know that each supporting structure consists of 3 blanks glued together. An opening should be formed in the central part. Immediately you need to cut out 6 elements for two supports. Next, the master must make straight cuts using a circular saw. Corners should be rounded. In two blanks it is necessary to cut out the central part so that the groove fits on the central part of the support. The width of the groove should be slightly smaller compared to the thickness of the tenon in the leg. This will prevent the structure from loosening during swelling and drying.
At the next stage, you can glue the supports. After applying glue to the surface of the parts, they must be folded so that the upper edges are flush. Reliability of fastening will be ensured by clamps. After the supports have dried, you need to get rid of excess glue. After the clamps are removed, you need to plan the lower and upper edges.
Working on the legs
When making a wooden table with your own hands, you need to prepare four legs. Afterwards, the vertical edges must be planed and rounded using a milling machine. At the ends of long workpieces, it is necessary to mark and then cut out tenons, placing them at the bottom and top. This can be done using a circular saw, which must be equipped with a combination blade. After the moldings are cut and brought to the required dimensions, you can round all 4 ribs. It is necessary to make grooves for glue on the back surface of the moldings.
Work on supports
If you decide to make a wooden table with your own hands, photos of the design will help you decide what features this piece of furniture will have.
The next step will be cutting out blanks for the supports. For gluing, select a 10 mm groove in each workpiece. It is preferable to perform these manipulations immediately. In order to simplify the task, you need to prepare a cardboard template, marking the location of the grooves on it. Next, you can perform pairwise gluing so that the cut is located in the central part. Everything needs to be tightened with clamps. Once the glue has dried, you need to clean the cuts using emery cloth.
Installation of legs
If you are making a wooden table with your own hands, you must first review the photos. It is important to initially adjust all connections without using glue. At the wide edges, the connections should be tight. A gap of 1.5 millimeters must be provided on the side to compensate for changes in the size of the wood. When edging, these elements will be decorated.
The walls and spikes must be treated with glue, after which you can begin pairing the legs with vertical supports. Without waiting for the glue to dry, you need to make holes and reinforce the connection using dowels. If you decide that you will make a wooden table with your own hands, it is recommended to prepare the drawings at initial stage. Moldings for legs should be cut off required length. They need to be glued and tightened using clamps. The glue is applied and then left until it dries.
If you decide to make a wooden table with your own hands, you can borrow the drawings from the article. The jumper should be installed high, so that those sitting at the table do not touch it with their feet. It is necessary to make gluing using two strips, which are previously edged with molding.
After the glue has dried, you need to remove the clamps and then chamfer. Holes must be made on the short sides to install fasteners. The tabletop can be made independently; its dimensions may differ from those presented above. At the ends you need to select tenons using a jigsaw.
Next, the cut areas are cleaned with a file. Along the long edges of the workpiece, it is necessary to install strips, which are pulled together with clamps and dried. Using an edge cutter, you need to align the edges of the moldings. They should be fixed to the planks, and then dried and the joints cleaned using a grinder.
When you make a wooden table for your garden with your own hands, the drawings will allow you to understand how the tabletop and legs are connected. To do this, use U-shaped brackets. On the long sides of the base, quarters should be selected to secure the sides. The ends of the last elements need to be rounded and cleaned. Afterwards everything is glued and compressed with clamps, and then left until dry.
Final works
Before you make a wooden table with your own hands, you need to familiarize yourself with the technology of the work. At the next stage, with a deviation of 100 millimeters from the edges of the base, it is necessary to make holes, the diameter of which should be equal to 20 millimeters. A through groove should be placed between them. The holes are required to prevent the base from splitting. If you are making a wooden table for your garden with your own hands, the drawings should help you carry out the work.
Now the master can assemble the table; to do this, it is necessary to fix the jumper to the legs. Using a pencil, you need to mark the position of the legs so that they are perpendicular to the ends of the lid. The brackets should be installed according to the markings. You need to make 10 holes in the tabletop to install screws. Next, you can strengthen the brackets. It is necessary to place a washer under each screw; this will compensate for shrinkage; this is the only way to make a folding wooden table with your own hands.
You can change the technology and dimensions of the table at your own discretion. However, it must be remembered that the design should be as strong and reliable as possible. It's important to protect wooden elements from negative impact external environment, especially for those pieces of furniture that are supposed to be used in the kitchen or outdoors.
How to do country table
Arranging a summer house is a constant process. Either you build something, or you improve it. Moreover, furniture is constantly needed and tables are most in demand in the country. And put it in the garden, and near the house, and also in the gazebo. We will tell you how to make a table for a summer house with your own hands in this article using the example of ready-made projects.
Homemade table from pallet boards
The material for this table was disassembled pallets. Naturally, you can use new boards. There is only one condition - they must be dry. You can buy dry ones (this costs more) or buy regular ones, put them somewhere in ventilated stacks and keep them for at least 4 months, or better yet, six months. In general, any furniture, including garden benches. made from dry wood.
We are assembling a table for the street - to put it in a gazebo, so we will not glue the boards of the tabletop, but will fasten them from below, using planks. This is a very simple country table and very cheap.
Having disassembled the pallets, we get boards with individual colors and patterns. Having worked a little magic, rearranging them several dozen times in different ways, we achieve the required result. It turns out to be quite a nice tabletop.
We assemble a tabletop from boards
Take the side parts of the pallet. We use them for the table frame. We first sand them with coarse sandpaper, then fine sand them to the required smoothness (grain 120 and 220).
The side slats will go to the sides of the table
We take the planks that remained unused and use them to fasten the tabletop. We place them in the place where the joints of the boards are located. We use two self-tapping screws to fasten each board with a joint, and one for a solid one.
From the treated sidewalls and two boards (also sanded) we assemble the table frame. We fasten its parts with self-tapping screws at the end (two for each joint). The frame can be glued or also “planted” on self-tapping screws. Only they are long. For each, we pre-drill holes with a drill whose diameter is slightly smaller than the diameter of the screws.
The tabletop is almost ready
We turn the assembled tabletop over and sand it. The procedure is the same - first use sandpaper with coarse grains, then with fine grains.
Next is installing the legs. We select four boards of the same size, check their length, and adjust if necessary. Then - sanding again. This is easier than sanding the legs that are already screwed on. We screw the sanded boards to the frame. These will be the legs. For each there are two self-tapping screws, fixed diagonally (look at the photo). For greater stability, we install jumpers at the bottom. You can leave about 10 cm from the floor to the lintels. We connect everything with self-tapping screws, so that the boards do not crack, we pre-drill holes.
The DIY garden table is almost ready. All that remains is to coat it with varnish
After removing the dust, varnish again. In theory, the varnish should lie flat, but it depends on the wood, so another sanding/painting cycle may be needed. As a result, we get this homemade country table.
DIY garden table ready for use
If you don’t like mismatched boards and traces of old nails, you can make the same design into boards. This table can be rectangular, or square. All sizes are arbitrary - please see the space available.
Country table made from leftover boards
This DIY garden table is assembled from leftover boards different breeds and sizes. Pine boards 25 mm thick and 50 mm wide were used for the tabletop frame, and 15*50 mm leftovers were used for the legs. We make the frame according to the dimensions you need. This table will stand on the veranda, which is small in width. So let's make it narrow - 60 cm, and length 140 cm. The height of the legs is 80 cm (everyone in the family is tall).
Assembling the frame, attaching the legs to it
Immediately cut two long boards of 140 cm each. To make the tabletop width 60 cm, subtract twice the thickness of the board used - this is 5 cm. Short bars should be 60 cm - 5 cm = 55 cm. Fold the frame, following right angles, twist with self-tapping screws. We check whether the bars are folded correctly - we measure the diagonals, they should be the same.
We cut the boards into four 80 cm boards, fasten them from the inside to assembled frame. You can use 4 screws for each leg.
Making jumpers for the shelf
At approximately the middle of the height of the legs we attach the crossbars. This is a frame for a shelf. The shelf can be used for its intended purpose, and it also increases the rigidity of the structure. We fasten strictly at right angles, checking with a large square.
We put the frame on the floor and check whether it wobbles or not. If everything is done correctly, it should stand rigidly. Next, take sandpaper or a sander and sand.
Let's start assembling the tabletop. From finishing works There were boards of different types of wood left, some painted with stain. We alternate boards of different colors.
We fasten the tabletop boards with finishing nails, carefully finishing them off with a hammer. You can secure it to the shelf with regular nails or self-tapping screws. Then we smooth it out with a sander. The last stage is painting. Very unlucky with the choice of varnish. We bought it too dark and didn’t like the look. I'll have to sand it again and paint it a different color.
Homemade table for the cottage is ready
Wooden table with glued top
This design features L-shaped legs. They are assembled from boards of the same thickness. IN in this case 20 mm. In order for them to hold well, 5 self-tapping screws are needed. We pre-drill holes with a drill with a diameter 1-2 mm smaller than the diameter of the screws. Then, using a drill of a larger diameter, we drill recesses for the caps. Diameter can be matched to furniture plugs suitable color or make them from a wooden rod. Another option is to use wood putty, to which you add wood dust that remains after sanding. After drying and sanding, the marks will be difficult to find.
Legs with markings for fasteners
When assembling the legs, you must ensure that the angle is exactly 90°. You can choose timber as a pattern. First, coat the joint of the two parts of the leg with wood glue, then install the screws in the following sequence: first the two outer ones, then the middle one, and only then the other two. After the glue has dried, we sand the legs, varnish them and dry them.
Table legs are ready
It's time to make the tabletop. We assemble it from boards of the same thickness. We select the size as needed. You can use fragments different widths. It is only important that everything looks organic, and that the sides of the boards are smooth and fit together without gaps.
Coat the sides of the boards selected for the tabletop with glue and lay them on flat surface(some kind of table) and tighten it with clamps. In this case, we got by with one, but preferably at least three. We tighten it so that there are no gaps in the resulting shield. Leave it for a day. Having removed the clamps, we get almost ready-made countertop. It still needs to be trimmed - align the edges, and then sand it. You can trim with a jigsaw or a regular handsaw. It's difficult to get a straight line using an angle grinder, but you can try. After sanding we get a beautiful tabletop.
Gluing a tabletop from boards
Using the same technique, you can make an oval or round tabletop. You just need to draw the appropriate line and trim the glued boards along it.
To make the table look more attractive, we will make a frame. We take a thin strip, sand it with sandpaper and fasten it around the perimeter of the tabletop. You can also use finishing nails. Only we also first coat the planks with wood glue, and then with nails.
We fasten the bar around the perimeter
After the glue has dried, we sand the joint again with sandpaper.
This is what the finished tabletop looks like
Now you can attach the table legs. We assemble a table frame from four boards (there is no photo, but you can do it as in the previous paragraph). We attach it to the back side of the tabletop with glue, then install furniture confirmations through the tabletop. A preliminary hole with an extension for the cap is drilled for the confirmations. The holes for fasteners are masked in the same way as on the legs.
We attach the legs to the fixed frame. We place them inside the frame. You can attach it with regular self-tapping screws. That's it, we made a table for the garden with our own hands.
The board table is ready
How to make a garden table from wood with benches
For this table we used 38*89 mm boards (we unraveled them ourselves), but you can take standard sizes. A difference of millimeters will not greatly affect the results. In the photo below you can see what should happen.
To connect the parts, 16 cm long studs with washers and nuts (24 pieces) were used. All other connections are made with nails 80 mm long.
We connect the table parts together with studs, washers and nuts.
The parts are installed in place, a through hole is drilled with a drill. A stud is installed in it, washers are put on both sides and the nuts are tightened. Everything is catching up wrench. Why is this option convenient? For the winter you can disassemble it and take it to a barn or garage.
Making seats
Drawing of a bench with dimensions
According to the drawing, we cut the boards to the required size. Everything is needed in double quantity - for two seats. We sand the boards, pay special attention to the ends.
The short sections that we use to fasten the three boards of the seat along the edges are cut at an angle of 45°. First, we assemble the structure that is attached to the seat from below. We take a board about 160 cm long, attach two sawn at an angle to the end of it short boards. You need to attach it so that this board is in the middle.
Bottom seat support assembly
Then we attach the legs to the resulting structure (you can use nails). Then we add more boards cut at an angle and tighten everything with studs and bolts.
We attach the seat boards to the resulting structure. Since this is an outdoor table, there is no need to knock them together closely. Leave a gap between two adjacent ones of at least 5 mm. We nail it to the supports (which have been sawn down), two for each board.
Fastening the seats together
We fasten the finished seats using four boards 160 cm long. We fasten each leg with hairpins (if you walk, you can put two hairpins, installing them diagonally or one above the other).
We connect the legs to the boards using pins
Assembling the table
The table is assembled according to a different principle. Please note that for the tabletop, the transverse boards along the edges are cut at 52°. We attach them at such a distance that the legs fit in. 2 nails for each board. You can use finishing ones, with small heads, or you can drive them deep and then mask the holes with putty.
How to make an outdoor table out of wood
Now we need to assemble the cross legs. We take two boards, cross them so that the distance between their ends is 64.5 cm. We outline the intersection with a pencil. At this point you will need to remove the wood to half the thickness of the board.
This will have to be cut out
We make the same notch on the second board. If you fold them, they turn out to be in the same plane. We connect with four nails.
How to make X-shaped legs for a garden table
We make the second table leg in the same way. We are not assembling the table yet.
Installing the table
Now you need to attach the legs to the structure on which the benches are installed. We place them at an equal distance from the benches and fasten them with pins.
Table leg fastening unit
Now we install the tabletop. We also fasten it with pins. The last stage is painting. Here everyone does as he pleases.
Outdoor table for a summer residence with benches
Variations on a theme
By this drawing You can make separate benches and a table for your dacha or garden. The design is reliable and simple to implement.
Separate benches and a table for the garden according to the same drawing
You can make the appearance more decorative by slightly changing the design of the seats and tabletops
Another option with separate benches
Painted white
DIY garden table: drawings
Stable country table
Simple table with X-shaped legs
Garden table made of wood
Homemade wooden table with a crossbar at the bottom
http://stroychik.ru
Is such a building on personal plot or in the garden, where you can relax with the whole family and invite friends.
But arrangement is not only about giving aesthetic appearance the building itself.
It is important to organize and interior space.
The role of the gazebo in the design of the cottage
The gazebo has a special role in the design of the dacha. In addition to its functional purpose, it must be in harmony not only with the surrounding buildings, but also with the landscape of the site.
It would be successful if all the facades of buildings on a personal plot, including the gazebo, were finished with the same material. Gazebos whose roof is an exact copy of the roof of the house look interesting.
But even such a room is unthinkable without internal content, the main element of which is the table.
You can make a good table yourself
You don’t have to buy a ready-made table for the gazebo, because you can make it yourself.
This option is preferable. As a result, you will receive a piece of furniture that you not only need, but also fits perfectly in size and shape.
This does not require extensive experience in construction work And special tools. Simple skills and a small set of tools are enough.
Wood is the best choice for making a table. Its main advantage is long term service, visual appeal and naturalness.
This table will be a worthy element general design dachas
Creating a Project and Drawing
At this stage you need to create detail drawing future table.
Self-tapping screws and fasteners made from stainless steel. Be sure to use wood impregnation, which will protect the table from rot and fungus.
Development of a 3D drawing of a garden table in AutoCad.
Step by step instructions
You can make a garden table with your own hands by following this master class.
It is necessary to prepare all tools and materials for work in advance. At the preparatory stage, the wooden surface is treated and the boards are selected according to thickness.
Then four boards measuring 15x70 cm are laid in a row and connected with thin wooden planks. And the end parts are covered on both sides with boards measuring 15x60 cm, which are fixed using special metal plates.
This results in a smooth wooden surface.
Rectangular top frame box
To prepare the top trim, make a box. To do this, you can use boards measuring 10x91 and 10x46 cm. First you need to make a rectangular base from long boards.
After this, stiffening ribs are installed on its surface, fixing them with self-tapping screws. It is important to install them at equal distances.
Support box
Preparing the lower frame
It consists of 2 parts, made in the form of the letter “P”. They are attached to each other using a long wooden plank. U-shaped elements are represented by two legs connected to each other by a bar.
Each support leg is made from four bars measuring 4x4 cm. After both parts are made, they are fastened to each other with a strip, the length of which is 10x99 cm.
To make it more convenient, turn the tabletop over and place it on the ground. Do the same with the frame.
Metal corners and self-tapping screws are suitable as fastening elements, which provide reliable connection structural elements.
Connecting the tabletop to the frame
We treat surfaces
All wooden surfaces must be carefully treated using a special protective compound.
He will give reliable protection from exposure to moisture and insects.
Varnish impregnation
Wooden table
Wood is the most environmentally friendly and pliable material.
A wooden garden table can be round, square or rectangular. Irregular shaped models are also popular.
If you plan to make it yourself, the tabletop may consist of narrow boards or slats.
A table made from wooden saw cuts also looks good, which can be made in several ways:
- connect the cuts to each other with a tongue-and-groove joint or staples, forming a flat surface;
- secure the cuts to some kind of base.
The finished surface is sanded and varnished. The gaps between the boards can be coated with epoxy resin.
Sand the finished product and coat it with a protective compound.
To give the surface desired shade, you can use stain or special impregnation with pigment. Such a piece of furniture can be placed not only in a gazebo, but also in an open space in the garden.
For more information on how to make a table for a gazebo made of wood, watch the video:
Pallets are used as a basis
Designers actively use to create furniture wooden pallets. This technique allows you to create an original stylistic solution.
Existing ideas can be used to implement the following solutions:
- models on a stand;
- on wheels;
- with lid;
- with glass top.
It is not necessary to buy a ready-made table. You can make it yourself using pallets.
Such tables themselves are not difficult to manufacture. To do this, you first need to find or buy a pallet. You can wander around in one of the large construction stores. Then you need to saw off a part of suitable size and screw the wheels to it.
You can put an MDF panel or glass on top. You can also buy them at one of the hardware stores. The finished table must be treated with impregnation.
If you want to change its color, use a stain of a suitable shade. This completes the production of a table from a pallet.
Such a piece of furniture will look organic not only in a gazebo, but also in the open air on a personal plot. And the design, complemented by wheels, is mobile and inexpensive.
From scrap materials
Many designers use any available materials to make a table. Such a piece of furniture allows you not only to decorate the interior space of a house or apartment, but will also look organically on a personal plot, in a gazebo or garden.
Ordinary stumps decorated with mosaics look original. Larger stumps can be used for quality original table. And smaller stumps are suitable for use as unusual stools.
Any tile left after renovation is suitable for decoration. It is split into small pieces, which are attached to the surface using cement mortar or tile adhesive.
Originality lies in your creativity. Such designs often turn into real works of art.
Tabletop in mosaic
An old table that has fallen into disrepair can also be decorated with mosaics. This will update the countertop. To do this, first remove old paint from the legs, sand them and cover them with one or two layers of new paint.
Then they sand the tabletop and glue the mosaic to it. You can apply grout on top, which will protect the surface from the adverse effects of the external environment.
You can also use a wooden spool for winding cable as a table. To do this, it is enough to process it and paint it in a suitable shade. But it can be further decorated.
The resulting piece of furniture will become more convenient if wheels are attached to its lower part. In this case, you can easily move it around the site.
Also, many people have inherited tables. Usually they are not used, as they require serious modification. At the right approach they can be used as garden furniture or put it in a gazebo.
If you inherited forged table, you can simply restore or replace the old countertop.
Wrought iron furniture for the gazebo
For those who have weaving skills and sufficient perseverance, wicker garden furniture made from wicker is suitable. Similar furniture You can do it yourself.
But if you like wickerwork and don't want to make it, go to a big box store. Here you can buy tables made of wicker or rattan, as well as artificial fibers.
If there is a lot of metal left on your site and you know how to work welding machine, you can make a beautiful table for the garden or gazebo.
Subject to availability necessary skills you will get an openwork and original product that will be one of a kind.
But before you start using it, do not forget to process everything metal surfaces anti-corrosion agent.
If you plan to paint the table, you can coat its surface with a special primer and apply finishing layer paints. The most suitable materials for countertops are wood or glass.
You can use a more interesting approach. Finish a simple countertop with mosaics or pebbles same height. Then cover the surface with glass according to the size of the resulting tabletop.
Whatever table you choose for the gazebo or your garden, the main thing is that it is in harmony with the surrounding landscape and the interior of the gazebo. And a thing made with your own hands will delight you with its uniqueness and originality for a long time.
A table is furniture that you can’t do without either in the city or in the country. The table can be placed on the veranda, in the gazebo, or just in shady place. You can dine at it, have a feast or play board games in the fresh air. You can only buy a small plastic table inexpensively; a large wooden table for a summer house is cheaper to make with your own hands. The article will present three options for tables and drawings for their manufacture.
Table dimensions and construction features
The optimal size of a tabletop for a garden table is 80x120 cm. A smaller table will be significantly inferior in functionality, table large sizes It will be too bulky and difficult to put away for the winter. The table size of 80x120 cm will allow you to hold formal feasts with the number of participants 8 - 10 people.
The easiest way to make a table for a summer house is from boards. In addition, it is the most accessible and inexpensive material. The advantage of making a table from wood is that the boards can be sawed right size at any construction base, and without any problems bring it to the dacha, thereby saving on transportation. It should be noted that with table dimensions of 75x80x120 cm, the longest board will be a tabletop board 120 cm long. A board of this length will fit into almost any car.
There are quite a few types of table designs, but by and large the difference is only in the form of the legs on which the tabletop rests. Therefore, the legs of the table are the most complex element of the entire structure.
Table top
The tabletop at the table in the country house is made of boards. The thickness of the boards can be from 30 to 50 mm. However the best option is a board 40 mm thick.
An important point is cutting the boards. With a tabletop length of 120 cm, 5.3 boards with a width of 150 mm, 6.6 boards with a width of 120 mm and 8 boards with a width of 100 mm are required. Considering that boards are sold in lengths of just over 6 m, it is advisable to choose a board with a width of 100 mm for the tabletop.
By choosing a board with a width of 100 mm, you will not have to adjust or change the dimensions of the tabletop, which will greatly simplify the work of arranging the table. In addition, there will be 2 more boards 120 mm long, which can be used for other parts.
If you purchase the right board If it doesn’t work, you can make the tabletop not continuous, but with intervals. Such a tabletop will look no less interesting. In this case, water that can accumulate on a table with a solid tabletop will flow through the gaps between the boards.
Table with straight legs
Table with straight legs simple design table for the garden. It's sustainable comfortable table, which will serve well both indoors and outdoors.
Fig.1.
The legs for the table consist of 4 elements: 2 vertical posts and 2 horizontal ones. The upper horizontal rack is attached to the tabletop, the lower one is a support.
Fig.2.
The design of the legs may vary. For example, instead of resting on the bottom board, you can make the support rest on vertical racks, and the bottom board can be made as an additional one for strength.
Please note that in this design, the boards are connected without additional grooves. This greatly simplifies the assembly of the table. To ensure that all elements are well secured, all joints must be glued with wood glue. In this case, the boards can be connected with self-tapping screws.
Fig.3.
- Assemble the legs. To do this, you need to cut the board according to the drawing. Treat the joints with glue and tighten with self-tapping screws or confirmant.
- Lay out the boards for the tabletop on a level surface, mark the position of the legs and secure the tabletop boards through the top strip of the legs.
- Install a horizontal tie between the legs.
- Wait 2 - 3 hours until the glue dries and remove burrs and sharp edges from the table.
- Next, the table can be varnished. Or simply treat with an antiseptic.
Table with X-shaped legs
A table with X-shaped legs is essentially not much different from a table with straight legs, it just has a different shape of the legs. However, it is impossible to manufacture without creating additional grooves on the legs. This makes the work somewhat more difficult.
Fig.4.
The table legs consist of 3 elements. Two crossing supports and a vertical top bar. The top bar, as in the previous case, is necessary for attaching the tabletop.
Fig.5.
To connect the legs in the inclined supports, you need to make a slot in the floor of the board.
Fig.6.
The table assembly procedure is as follows:
- Cut the boards to the required length.
- A groove is made in the legs into the floor of the board. The groove can be made with a jigsaw or a router.
- Assemble the legs. The connections are glued. The parts are fastened with self-tapping screws.
- Lay out the tabletop boards and attach the assembled legs to them.
- Install the bottom screed board.
- The table is treated to remove burrs and varnished.
Table with benches
A table with benches is quite often installed on verandas or in the open air. Unlike the designs described above, it does not require additional benches or chairs; the benches are included in the design of the table.
Fig.7.
The disadvantage of this version of the table for the dacha is that the design is quite cumbersome, and putting it away for the winter becomes very problematic.
Fig.8.
A special feature of the table design is that the benches are attached directly to the table legs. The crossbars on which the benches are attached simultaneously act as a tie for the legs, and the benches play the role of a longitudinal tie.
Fig.9.
The procedure for assembling a table with benches is as follows:
- Cut the boards to the required length.
- Assemble the legs and support for the bench flooring. The joints are glued and tightened with self-tapping screws.
- Mark the boards for the tabletop and mount them to the legs.
- Benches are secured.
- Treat with impregnation or antiseptic.
Examples of garden tables
Fig. 10.
Fig. 11.
Fig. 12.
Fig. 13.
Fig. 14.
Fig. 15.
Fig. 16.
Fig. 17.
