Today, a very large number of consumers are supporters of covering the floor with carpet, which is a combination of carpet and linoleum, as if two in one. As a result, received soft coating you can cover the entire floor in a house or apartment, as evidenced by numerous photos of carpet on the floor.
Ordinary people call it roll carpets, because it is often sold in rolls, but also in finished form It can also be purchased in certain sizes.
The composition of the carpet includes pile and base, consisting of one or two layers. To produce a single-layer base, dense fabric from synthetic fibers, into which the bristles of the pile are embedded. A two-layer base consists of a pile and two bases, between which a fixative is placed.
Types of coating
Carpet is divided into several types, which depend on the material used and the production technology itself.
Most often in production carpeting polyamide, wool and polypropylene materials are used.
Wool products are natural and expensive. They are environmentally friendly and fire-resistant, but their disadvantages include fairly rapid wear.
Polyamide is classified as synthetic. Their significant advantages include: elasticity, wear resistance, fire resistance. But they can cause allergic reactions during use, since they are produced by chemical synthesis.
Polypropylene is the cheapest and most commonly used in the production of floor carpet spinning materials.
In addition, carpet floor designs are often used using various combinations, combining the above-mentioned materials in different parts.
Carpet base
Jute. It is a natural and environmentally friendly material. But he is afraid of humidity, because, being for a long time In wet conditions, the fibers will wear out and the primer layer will be damaged.
Felt. Synthetic and moisture-resistant material, resistant to various external influences of a mechanical nature. Mainly used for the second layer. Suitable for covering parquet floors.
Rubber. Hard material, resistant to mechanical stress, non-slippery. Recommended for use in areas with high traffic.
Action back or synthetic jute. Its main advantages are moisture resistance, high strength, it does not break down during use, which is why it is used in office premises. IN living rooms not worth using.
For quality, pricing policy, appearance and other indicators are significantly influenced by the technologies used in production.
As a result, there are such types of carpet as woven, tufted, needle-punched, flocked.
Pros and cons of coverage
Carpet flooring, like others, has its pros and cons. TO positive qualities include:
- the ability to add coziness, comfort and softness to the room. Nice to touch warm floor from carpet with bare feet or play with your child while sitting on the floor.
- property of not slipping on the floor if you fix it wooden baseboard for the floor.
- the ability to use it on any floors: concrete, parquet, laminate, etc.
- the ability to provide excellent heat and sound insulation of the room.
- fire resistance.
- not a lot of weight.
- long service life.
- a wide selection of colors that will help increase or decrease the space.
- Easy to install, maintain and clean using cleaning products.
The disadvantages include:
- ability to attract large amounts of dust.
- burning out in the open sun.
- fear of wet places.
- Cleaning products may leave stains.
- creating an environment favorable for the reproduction of various bugs and insects, especially if there is a basement under the floor.
- the ability to cause allergic reactions in others.
Many people will wonder whether laying carpet in the house is necessary. Experts will convincingly answer: yes, it is necessary. After all, the disadvantages are not so significant in comparison with the advantages.
Features of choice
The main criteria influencing the choice of carpet are:
- purpose of the room,
- cross-country ability,
- type and condition of the floor,
- interior design of the room and its area,
- presence of pets,
- climatic conditions,
- lighting level,
- cost of the product.
In apartments and residential buildings It is recommended to use carpet made from natural wool or in combination with other materials. A hallway or corridor will be decorated with a covering with short lint; it is not easily soiled and will be easy to care for.
The bedroom deserves a royal high-pile floor covering to keep your feet warm and cozy.
A synthetic carpet that does not allow particles of concrete dust to pass through is suitable for a concrete floor. In public places with high traffic, it is better to use carpet with a synthetic or rubber base, as they are more wear-resistant.
Carpet should not be laid on a wooden floor in rooms with high humidity. In this case, it is necessary to give preference to other types of flooring.
Photo of carpet on the floor
Among floor coverings, carpet is rightfully considered the most comfortable. As soft and pleasant to the touch as a carpet, it is less susceptible to contamination and costs less, and a wide range allows you to choose the best option for absolutely any interior. Like other materials, carpet has its pros and cons, which it is advisable to familiarize yourself with before purchasing the covering in order to avoid annoying mistakes when choosing.
In structure and appearance, carpet is similar to a rug or carpet, but, unlike these products, it spreads over the entire floor area and has a single color or a repeating pattern. It is produced in rolls with a width of 3 to 5 meters and is sold not individually, but by the meter.
Standard carpet has a three-layer structure: a pile layer, a base and a fixing backing, which increases the wear resistance of the coating. There are also cheaper models that consist only of lint and base.
Manufacturing materials
The price and quality of the coating are determined, first of all, by the material of manufacture. According to this criterion, all carpet is divided into two types.
Synthetic coatings— made of polypropylene, polyester, nylon fibers. They are less susceptible to contamination, easier to clean, and suitable for people with allergies. Moth and mold are also not dangerous for such products. Synthetic coatings are more affordable in cost, and their colors are brighter and more saturated.
- made from sheep wool with added artificial fibers to improve performance characteristics. A coating containing at least 20% wool is considered natural, and the higher the percentage, the more expensive the product. Wool carpet retains heat well, so it is best suited for rooms with cold floors. Natural fibers wrinkle less and quickly restore their original shape.
The basis of the carpet is jute fabric, artificial felt, rubber. Each of these materials has its own characteristics that influence the choice of coating. Thus, natural jute is softer than artificial jute, therefore it does not withstand heavy loads and is used mainly in residential premises. Coverings based on artificial jute are more durable and can be used in public spaces with moderate traffic.
It is worth noting that both types of jute, when exposed to loads, leave marks on the floor in the form of scratches, which is especially noticeable on parquet and laminate. This is not visible under the carpet, but if you ever decide to remove the covering, the floor surface will have to be restored.
The base made of felt (synthetic felt) does not have such disadvantages. It's soft and at the same time durable material, resistant to moisture, chemical attack, and deformation. It is ideal for laying on parquet floors, since even under intense loads it does not leave abrasions or scratches on the surface. In addition, felt has good sound insulation properties and retains heat well.
The rubber base is the strongest, resistant to various types loads, does not slip on the floor and is resistant to deformation. Carpet on this basis is usually laid in public spaces with high traffic, although also in residential buildings this type coatings are also not so rare.
Manufacturing technique
The production method also affects the strength and durability of the coating. Based on the manufacturing technique, carpet is divided into four types - woven, needle-punched, tufted and flocked.
| Type of coverage | Description |
|---|---|
| It is the most durable and expensive coating. It is produced by interweaving the pile with the warp threads, that is, both the bottom and top layer the fabrics are woven simultaneously. The base is usually jute fiber, the backing is rubberized. In appearance and tactile sensations, this carpet is most similar to a traditional carpet |
| Medium coverage price category, made by stuffing fibers into a base using special needles. To ensure reliable fixation, the fibers must be glued on the reverse side. The fabric is dense, lint-free, and abrasion-resistant. As a rule, this technique is used to produce synthetic rubber-based carpet. |
| Budget and most popular type of coverage. It is produced by stitching the pile with needles through the base. Depending on the number and location of needles, the fabric has different density and pile height. On the reverse side, the pile is secured with a layer of latex and a secondary base, which gives the coating additional strength. Tufted carpet can be looped and cut, combined, and have a relief surface |
| Dense covering with short pile, resistant to moisture and wear. The base is a durable vinyl backing, and the fleecy layer is formed using electrostatic action. To improve its performance, the fabric is impregnated with antibacterial compounds, making this carpet excellent for bathrooms and hallways. Flocking allows you to create coatings that imitate the texture of cork and wood, which looks quite unusual and impressive. |
Density indicators
The density of the material also determines it operational properties, in particular, strength and resistance to deformation. The denser the pile layer, the longer the carpet will last and the more difficult it is to crush it. This applies equally to loop fabrics and sheared pile coverings. Density indicators depend on the thickness of the fibers and the number of nodules per unit area.
Typically, the weight density of carpet products varies between 280-2070 g/m2, the density of padding is from 170 thousand to 1 million knots per m2.
There is a simple way to visually determine a denser carpet among several options: you need to bend the edge of the fabric to the wrong side and look at the fold line. If the base mesh is clearly visible, the quality of the carpet is low and it will not last long. If the base is difficult to see from under the pile, this indicates a high density of the coating, which means that such a carpet will be strong and durable.
Dyeing method
This criterion affects exclusively appearance coatings during operation. Poorly colored pile fades quickly and unevenly, which is why the coating appears dirty, worn out, and loses all attractiveness. When making expensive carpet, the pattern is formed from colored fibers, so the color remains stable throughout its entire service life, does not wash off during dry cleaning, and almost does not fade in the sun.
More budget options painted at the final stage of production. The design is applied to the finished canvas, as a result of which the base of the pile remains unpainted and after several cleanings fades and is washed out. Of course, a lot depends on the quality of the paint and the technology of its application - for many, such carpet lasts quite a long time without losing its appearance.
Advice. In order not to make a mistake, when choosing a product, be sure to bend a corner of the canvas and see how deeply the pile is dyed: if at the base it has a different color, you should not buy it.
Prices for carpet for the home
carpet for home
Benefits of coverage
So, what are the advantages of this coating? The main advantage is a pleasant tactile sensation. It is always warm, soft (especially long-haired products), elastic. It is comfortable to walk on carpet barefoot, and it is comfortable to lie on such a surface.
It is great for those who have small children: there is no need to worry about the child hitting the floor when falling or sitting on a cold one. A carpeted room always feels warmer and cozier.
Carpet has other advantages.
Attractive view– modern carpet is distinguished by original colors and a variety of patterns, thanks to which you can transform any interior. In addition, carpets look expensive and solid.
Thermal and sound insulation– a thick carpet perfectly muffles steps and other sounds, which is especially important in city apartments with low sound insulation. Carpet retains heat in a room no less effectively, even if it is laid on a cement screed.
Versatility- it can be laid in any room: woven models with long pile are ideal for the bedroom and nursery; tufted carpet will look great in the living room; flocked carpet will look great in the bathroom, kitchen, hallway and hallway. A wide range allows you to choose a coating for the most different conditions operation. In addition, carpet can be laid on almost any floor - tiles, laminate, boards, plywood, screed, as long as the base is strong and level.
Easy installation– laying carpet in a room requires a minimum of time and effort. The canvas is usually glued to the floor with special glue or double sided tape, it can also be secured around the perimeter with skirting boards.
Safety– both natural and synthetic carpet do not support combustion and do not contain toxic substances. Artificial turf never harbors insects and does not develop mold (even in high humidity).
Carpet is a safe and non-toxic coating
With careful use, a good carpet will last 10-15 years without losing its qualities. To remove dust and dirt, it is advisable to use a washing vacuum cleaner rather than a regular one.
Flaws
The biggest disadvantage of this coating is its tendency to accumulate dust. And the longer the pile, the more often you have to clean it. At the same time, it is quite difficult to completely remove dust, since it gets clogged to the very base and gradually accumulates between the floor and the coating substrate. And if a regular carpet can be removed periodically to clean the floor, then with carpet it will be difficult.
Other disadvantages include:
How to lay carpet correctly
Even the most expensive and high-quality carpet can be easily ruined improper installation. An uneven surface, folds and creases in the canvas, insufficient fixation - all this leads to rapid wear of the coating, the appearance of tears and other damage.
So, let's look at how to lay carpet to avoid such troubles.
First of all, it is necessary to accurately calculate the amount of material. The best option– laying the covering in one continuous cut, since joints are the most vulnerable areas. The carpet area should correspond to the floor area in the room plus 20-40 cm on each side. This margin will allow you to accurately adjust the material around the entire perimeter so that there are no gaps left near the walls.
Next, you need to think about how best to fix the canvas to the floor. If the room is not too large, up to 20 m2, you can use double-sided tape. On an area of up to 12 m2, tape is attached only along the perimeter, from 12 to 20 m2 - along the perimeter and in parallel strips every meter. For large areas, it is recommended to use special glue, for example, Universal Moment, Homakoll, FORBO Eurocol 525.
In addition to carpet and glue, you will need:
- glue spatula;
- roulette;
- breadboard knife;
- metal ruler;
- roller
Step 1. First of all, prepare the base. If there is old carpet or linoleum on the floor, first remove the baseboards, remove the covering, carefully clean off any remaining adhesive and vacuum the surface.
Next, you need to make sure there are no gouges, cracks or other damage. If necessary, repair individual areas or complete leveling with a screed. The cleaned, dry base must be coated with a primer.
Step 2. When the primer layer has dried, the carpet is brought into the room and rolled out on the floor. This must be done carefully, trying not to bend the roll so that creases do not form. There is no need to even out the edges yet - the coating should rest for at least a day in a warm room.
Advice. If the coating consists of several strips, it is recommended to lay the sheets so that the joints are perpendicular window openings, but not in the walk-through area - this way the pile will fall off less and the coating will not look trampled.
Step 3. After 24 hours, the carpet is leveled, carefully smoothed, especially near the walls, and cut out. You can cut the canvas with a regular knife, but it’s more convenient to use special tool– leveler.
Step 4. For high-quality joining, adjacent sheets are overlapped by a width of 10 cm and both layers are cut along the entire length under the ruler.
Step 5. Having completed the cutting, they begin to fix the carpet. If the fastening is done with adhesive tape, the canvas is turned away from one end towards the center of the room, and then strips of adhesive tape are glued to the floor along the walls. Remove the protective tape from them and lay carpet on top. The same is done on the other side of the coating.
Step 6. At glue method laying the carpet is turned towards the center of the room, after which it is applied thin layer glue mixture with a notched trowel. Leave for 10 minutes and then roll out the canvas again. Now you need to smooth it thoroughly from the middle to the edges to expel the air from under the coating.
Step 7 At the threshold, the edge of the carpet must be covered with a special metal strip - a threshold that will not only protect the material from fraying, but also give it more aesthetic appearance. The threshold is fixed with screws to the base of the floor so that the edge of the strip tightly presses the edge of the carpet to a width of at least 5 mm.
Finally, skirting boards are installed around the perimeter of the room, which will also press the edges of the covering and close the gaps between the wall and the floor.
Prices for rubber backed carpet
rubber backed carpet
Video - Carpet: pros and cons
When moving to a new home, the question often arises regarding the choice of suitable flooring. For many owners, the process of selecting it becomes extremely lengthy and painful. Getting to know such a popular covering as floor carpet will help speed up the process significantly.
What is the material?
This type is statically attached to the floor. Similar to regular carpets, the material retains heat well and helps absorb noise. The carpet base is extremely durable. Therefore, such products last for decades.
Currently, the consumer has access to the material in rolls of various widths, which makes it possible to select optimal parameters without the need to cut the web. As for texture, most products have a fine pattern. This not only makes cleaning the carpet easier, but also makes it easier to join individual strips of material during installation.
Production
In the manufacture of carpet, both natural and synthetic components are used. Some types of material may contain from 10 to 30% wool.
Synthetic products are not too inferior to natural ones. Thus, nylon fibers are distinguished by a strong fit, due to which the threads practically do not come off over time. This ensures a long service life. To the touch, synthetic threads, which are used in the production of high-quality carpet samples, are practically indistinguishable from natural ones.
Features of choice
Like any other materials, carpet has pros and cons. Therefore, before deciding to install it, you should pay attention to some points:
- type of premises (office, residential, public);
- terms of Use;
- level of cross-country ability;
- climatic characteristics.
Most practical option A material that contains a high percentage of natural wool can become suitable for residential premises. Moreover, for bedrooms it is better to use products with long pile, which look more aesthetically pleasing and provide additional comfort and comfort. Dense coverings are suitable for corridors. In the latter case, cleaning the carpet will be easier.
In addition to structure, shade and design play a special role in the choice. It is important that the material fits organically into the interior design. For well-lit rooms, optimal solution becomes carpet dark shades. Regarding flooring light colors, then they are able to compensate for the lack of lighting and decorate rooms with small windows.
Carpet laying
Ideally, it is recommended to select whole pieces materials that do not have to be divided into parts and look for ways to join the sections. In the latter case, you need to take into account the direction of the pile, and also try not to place the joints in the middle of rooms where there is constant movement of a large number of people. To avoid having to regularly adjust the coating, it is advisable to press down its joints with furniture or place the edges under the baseboard.
Place in the open concrete base synthetic carpet is better. The pros and cons of this solution are obvious here. A dense layer of material becomes an effective barrier to concrete dust. Products based on synthetic or rubber are especially practical when used in high-traffic areas. The only disadvantage here can be considered the limited texture solutions. However, this should not be a critical moment for public facilities.
One of the common solutions is to lay carpet on First, the adhesive base is placed around the perimeter of the room, and then a kind of frame is formed in the form of a grid. This option becomes convenient not only for fixing solid material, but also when it is necessary to fix a significant number of small pieces.
At mechanically When laying, the edges of the canvas are connected to metal hooks mounted in the walls under the baseboard. This method extremely reliable and eliminates material shifts.
Carpet: pros and cons
Like any other floor covering, the material has its own advantages and disadvantages. The obvious advantages of carpet include the following:
- The presence of a soft and pleasant to the touch structure.
- A variety of textures, patterns, colors.
- Laying the material helps absorb noise.
- No coating needed special care. Regular cleaning with a regular vacuum cleaner is sufficient.
As already noted, carpet has pros and cons. Unfortunately, the material has enough of the latter. Thus, a static charge is formed on the surface of the coating, which attracts dust and dirt.
Carpet flooring is difficult to remove stains from. Most often, careless handling of the coating leads to the need for expensive dry cleaning or complete replacement.
In the end
Despite a whole host of shortcomings, carpet remains one of the most effective solutions for living rooms and bedrooms. The material is perfect for installation in terms of practical and relatively inexpensive coverage. This solution helps save money and allows you to enjoy warmth and comfort.
When choosing a floor covering, you have to take into account many nuances. The coating that owners choose for their apartments can say a lot about them. One of the popular modern materials Carpet is considered to be a beautiful and stylish covering. But how practical is it, and in what rooms is it rational to use it?
Advantages of carpet
Before you scold something, you should understand why people value and choose carpet among the many floor coverings? The indisputable advantages of a modern “carpet” include:
- Thermal insulation. Your floor remains warm even in the cold season.
- Soundproofing. This coating muffles steps, running of children or the sound of fallen things.
- Safety. If you drop something on the carpet, the chance of breaking it is lower than if it falls on the parquet.
- Collects dust. Surprisingly, this can be considered an advantage, because thanks to the wool covering, dust does not fly in the air, but settles on the floor. All you need to do is vacuum your room frequently. If you decide to lay carpet, then you simply need a good and powerful vacuum cleaner. Mobile devices are especially popular today, making it possible to collect dust throughout the apartment and not get tangled in wires. Find out more about the types of cordless vacuum cleaners and popular models of this type.
- Easy to install. You can lay the carpet yourself if you have necessary tools and desire.
- Variety and style. The carpet is available in a variety of colors and textures, which allows you to successfully combine the covering with a variety of designs.
- Cosiness. If carpet is used in the room, the room immediately acquires warmth. True, this can also be attributed to disadvantages, because comfort is not combined with any stylistic trend.
If you want to arrange a room in the hi-tech, modern, Japanese, minimalism, loft, constructivism, cubism, avant-garde style, then using carpet will violate their concept.
Disadvantages of carpet
There will always be disadvantages to flooring. Of course, if you are thinking about purchasing this coating, then you are subconsciously striving to create warmth and comfort in the room. But what will it cost you?
- It is not recommended to use it in rooms with high humidity - it will begin to become damp and deteriorate.
- You will have to clean rooms where there is carpet on the floor much more often, otherwise the accumulation of debris will lead to damage to the linen.
- The material absorbs odors, so laying carpet next to the kitchen is not recommended.
- It can be difficult to clean up if you spill coffee, wine, or knock over a plate of food.
Of course, all these disadvantages cannot be compared with the comfort that carpet creates in rooms.
About the types
Carpet is divided into several types. It all depends on what materials it was made from and in what way.
Let's start with the materials. To create this type of flooring, three types of materials are used. This:
- Natural wool is an expensive material. But its main advantage lies in its environmental friendliness and fire resistance. However, it wears out quite quickly.
- Polypropylene. This cheap material, which is most often used to create yarn for carpeting. In terms of its indicators, the material is mediocre.
- Polyamide. This material completely synthetic, but having such advantages as elasticity, wear resistance and fire resistance. At the same time, synthetic fibers can adversely affect human health.
In some cases, in the process of carpet production, they resort to a combination of materials that were mentioned above. Moreover, the materials are combined in different proportions.
Any carpet has a base. For its manufacture the following materials are used:
- Jute. This natural fiber, which is environmentally friendly. At the same time, jute is afraid of exposure to moisture. If a carpet with a jute base remains wet for a long time, this will lead to rapid abrasion of the fibers and destruction of the primer layer.
- But material such as felt has good moisture resistance. It is made from synthetic fibers. The felt base is very warm and cozy. She's not afraid mechanical impact. Most often, felt is used to create a secondary base. Carpet with a felt backing is perfect for laying on parquet floors.
- The rubber base is hard. It does not deform due to mechanical loads and does not slip on the floor. Carpets with such a backing are laid in high-traffic areas.
- A material such as action back is synthetic jute. It is incredibly durable and has good moisture resistance. This material doesn't shed. As a rule, such carpet is laid in office premises, since due to its increased rigidity it is completely unsuitable for residential premises.
Carpet is divided by sight and manufacturing technology. In fact, it directly affects the quality of the coating, its cost and appearance. Carpet is made in several ways. It happens:
- Fabric.
- Tuftingov.
- Needle-punched.
- Flocked.
Choosing carpet
The choice of carpet largely depends on your preferences. There are many options for this coating, with a wide variety of textures, different color scheme, interesting patterns. There can be no advice in this area, because it all depends on individual preferences. But, there are several recommendations, using which you can choose high-quality coating, remaining beautiful for a long time.
- Choosing between synthetic material and natural, give preference to natural carpet. Of course, such a purchase will cost you more, but you will not go wrong with the quality.
- Regarding the length of the fibers, it is better to purchase a coating of medium “fluffiness” - this is the most practical.
- You should not buy a carpet with excessively soft pile. Of course, such a coating will be very pleasant to the touch, but the cleaning process will turn into a complete torture.
- Pay attention to what kind of floor will be under the covering. If you are laying carpet on concrete, then do not choose fabrics with a natural jute base - it will collect moisture. But such a carpet will fit on a wooden floor without any problems.
- If you see olefin in the carpet, this means that the fabric can be easily cleaned with detergents.
When going to the store to buy carpet, carefully choose its color. Remember that light colors will be able to visually expand the room; dark ones, on the contrary, conceal the space.
If you decide to lay carpet in your apartment, then be prepared for the fact that you will have to take care of the covering. Here are some tips to make your job easier:
- Wet cleaning is not recommended more than once a month;
- To clean carpet, use dry powders or cleaning foam effectively;
- several times a year you should call a specialist to clean the canvas with special chemicals;
- If you spill or scatter something on the carpet, it is recommended to immediately begin cleaning before the stain becomes embedded and damages the carpet irrevocably.
Most importantly, do not forget that moisture damages the canvas, and when cleaning, avoid large amounts of water. Otherwise, the coverage is completely justified.
Carpet gives a feeling of comfort, security and warmth. It is not difficult to install at all. Moreover, it does not require special care. Regarding design solutions, then in the case of carpet they are simply limitless!
Due to the fact that carpet has excellent thermal insulation properties, you can significantly reduce the cost of heating a house or apartment. In general, this floor covering has affordable price and can satisfy customers' requests. It is worth considering that for office space carpet is made using a special method. Thanks to this, it provides excellent acoustic comfort, that is, the noise level is significantly reduced. In addition, commercial carpet is also wear-resistant - it can withstand increased levels of load.
The carpet is also different good performance electrostaticity. Therefore, it is recommended to install it in rooms where many computers and office equipment are installed. In addition, this type of flooring is subjected to special treatment, giving it additional strength and fire resistance. This carpet does not get dirty.
Video. Carpet: types, classes, pile composition, bases
The positive aspects of modern carpeting are much greater than the negative ones. A room covered with carpet is always warm, cozy and comfortable; this material is quite resistant to various kinds contamination, durability and wear resistance.
A wide range of color and texture solutions allows you to choose a coating to suit any interior. Carpet retains heat in a room for a long time and has sound-absorbing properties. When walking on carpet, the load on the joints and spine is reduced.
Modern coatings are treated with special fire-fighting substances during production.
Myths about carpet
And finally, the most common myth about carpet is “a terrible and dangerous dust collector.” A room with carpeting, as well as a room with parquet and laminate flooring, collects the same amount of dust and dirt. The only difference is that the carpet pile traps all this and does not allow it to rise. But in a room with a hard surface, all this dirt and dust constantly circulates in the air, and people, accordingly, inhale it all. Conclusion: in a room with anyone floor covering needs to be cleaned periodically. If your apartment has carpeted rooms, then you definitely need a powerful vacuum cleaner. TO synthetic species The coating can also be wet cleaned.
Disadvantages of carpet
This coating is unacceptable for people prone to allergies (a vacuum cleaner cannot always cope with mite larvae that can live in natural wool carpet). Cheap synthetic carpet is hazardous to health (the main symptom is the pungent odor of the coating).
Some types of coating (again natural) are sensitive to high humidity and even wet cleaning may become stained; some types of stains may not be completely removed from the carpet. When constantly exposed to direct sunlight, carpet fades over time.
Carpeting in different rooms
The bedroom is perhaps the only room where carpet with soft long pile is acceptable as a covering. Since they are not typical for a bedroom heavy pollution and high humidity.
A dense synthetic (hypoallergenic) short-pile carpet is suitable for a children's room. The material must be environmentally friendly and not have a strong odor. A security certificate is also required.
For the living room, a short-pile dense covering with increased wear resistance and reliability.
