For some reason many people think that beautiful picture should decorate only the living room, bedroom or kitchen, while others... Even if you have problems with wood carving, you can find an easy alternative - cutting out panels from plywood.
Wooden signs with drawings and inscriptions on a bath theme will decorate the interior of the bathhouse.
Sequence of carving
1. Step one. Start of action
To start implementing my plan, I liked this board - a start coniferous And standard size in the well-known Leroy Merlin store. Waldemar writes:
2. Step two. Marking, cutting
Visually, I divided the length of the board into three parts, necessary and corresponding to the products.
Made the cut according to the planned drawings.
3. Step three. Drawing.
The Internet is very rich in the selection of necessary images... and, having decided on the choice, I transfer the necessary part of the drawing to my object. This is done by hand by me, which creatively excludes copyright, because... in the process, the drawing becomes not an exact copy, but only a part of a part of an image, while the author’s idea acquires its original outline.
An oak leaf can be copied from a tree or from a herbarium
4. Step four. Thread.
Now you can start carving. In this process I use three types of cutters: Tatyanka chisels and one Swiss chisel.
Using a joint, I make cuts along the outlined contours of the design, and with a chisel I cut to fit the contour, thereby highlighting the design above the background.
After giving the product a decorative volume, it is necessary to sand the carved surface (sandpaper No. 180, No. 220 is used)
I add pairs in the form of clouds to the main design, which are subsequently cut out with a joint and a chisel, and I sand the clouds. 
At this stage carvings on the plate are completed and you can begin the final steps, namely coating and giving the product a noble appearance.
5. Step five. Stain, varnish. 
I apply the stain with a brush in one layer over the entire surface and shade the recesses with a second layer of stain. After drying, I erase the protrusions of the design with sandpaper, resulting in a three-dimensional image effect. 
After applying the varnish with a balloon at a distance of 10-15cm. from the drawing (I use a polyurethane spray bottle with furniture varnish) the plate acquires a shiny surface that is pleasant to the touch and look. At this point, the “Bathhouse” sign will be ready for use after the varnish has dried (12 hours). And we will proceed to the second part of the Leroy Marlin board, on which we will cut out an equally original sign in addition.
6. Step six. Decree! 
I gradually transfer the desired image onto the board. To translate a drawing, a picture is used that is printed on a printer to fit the size of the board and translated directly using carbon paper.
After which I cut out the applied design as well as the “bathhouse in step four” with a joint and a chisel. Then sand it with sandpaper. 
But the inscription under the word “decree” is cut out with a pointer with a triangular tip, the result is an in-depth text that you can not sand with sandpaper and go straight to the stain-varnish coatings.
6. Step seven. The third part of the board.
I use the burner on the third part.
But initially the design is cut into the depth of the surface using a jamb by trimming each cut.
After cutting out the inscription inside the surface with a jamb cutter, an original font was obtained, which is burned out with a “stayer” burner like a pencil.
Three signs for your favorite bathhouse are ready! Enjoy Your Bath!
And more carving options for the bath:
Sign for the entrance door of the bathhouse
A wooden sign in a bathhouse is a decorative element of the interior, which not only performs an indicating function, but also, having its own unique, attractive design, will become a decoration for your bathhouse.
You can, of course, go to the “Everything for a Bath” store and buy a ready-made sign, perfect in its design, with a carved inscription and a picture on a bath theme:
- He who sweats does not grow old
- Mr. broom in the bathhouse
etc.
Such wooden signs look very impressive above front door baths or steam room...
They are on sale and are not that expensive: around 500 rubles.
But try making a sign for a bathhouse with your own hands...
To make a sign for a bathhouse from wood, you first need to select a board.
The board must meet certain conditions so that something on the bath theme can be depicted on it in the future:
- the thickness of the board should be no more than 30mm. Agree that a 50mm board will be too bulky
- If the inscription will be made by carving, then it is best to find a board made of linden. This is soft wood, on which not only inscriptions, but also entire scenes on a bathhouse theme can be easily obtained
- If the inscription is applied by burning, then any wood is suitable for this method...
What to do if you don’t know how to burn or cut? In the sense that you have never done this before, and you desperately and urgently need a sign for a wooden bathhouse... Well, I really want to...
So, we will go the simplest and easiest way.
First we process a board about 30cm long
First you need to prepare the board:
- find no edged board thickness 20.25 maximum 32mm. Let it be coniferous or birch: for our method the type of wood is not important.
- choose a section about 30 cm long on it, on which there are 1-2 knots. They will also look beautiful.
- Saw off the selected area from the board with a hacksaw or jigsaw.
- On such a board, unedged edges will look very impressive. You just need to remove the bark from them with a hatchet and clean the surface of the residue with a sharp knife.
- grinder clean the surface until white on both sides of the board
- remove chamfers from sharp edges with the same grinder
Your board is ready for writing on it.
Now, on the prepared surface of the board, we will make the inscription “Bath” with our own hands from any twigs, for example, birch. You can take twigs from any tree that is available to you at the moment.
You can glue letters from twigs using a heat gun
- Use pruning shears to cut a couple of branches as thick as your little finger. Large thickness will be inappropriate on a board with a height of 120-150mm. If you take a smaller thickness, it will look weak. Everything must be in accordance.
- Cut sticks for letters from the branches. If the pruning shears cuts smoothly, like a razor, then there is no need to correct the ends of the branches. If the pruning shears crushes and “chews” a twig when pruning, then you need to correct all the ends with a sharp knife.
- Make a word from the chopped sticks, placing them evenly on the board.
- In the letters “B” and “I”, the rounded parts are best made from saw cuts. To do this, find a thick branch of suitable diameter, for example, old branches of an apple or cherry tree are often lying around in firewood. Saw off a couple of ovals from it with a jigsaw (obliquely) no thicker than the thickness of the letters. On the ovals, an outline with bark will be visible on the sides, which will volumetrically designate the round part of the letter.
- stick a couple of letters onto the board using a heat gun.
It is advisable to first coat all surfaces of the board itself and the letter sticks with PVA. Using PVA, a couple of leaves are also glued on, which symbolizes a bath broom.
Finally, the sign for the bathhouse is varnished. The varnish makes the wood waterproof, which will be important if the sign is hung above the entrance door of the bathhouse from the outside.
And also, the varnish gives the wood a rich color and a wet effect.
It is better to varnish all surfaces
The varnish has one drawback: it takes a long time to dry. If there is a need to speed up the drying process, then you can place a sign for a bathhouse (made by yourself!!!) to the heating radiator, thereby increasing the temperature and reducing the drying time.
A sign for a wooden bath with the inscription “Bath” or “Steam room” will become a wonderful gift for the person you are visiting to take a steam bath and enjoy the Russian bathhouse.
essay template write an essay paul graham essays
As you know, a bath is not only a healthy procedure, but also a source of good mood. Creating a positive attitude is facilitated by: good steam room And cozy interior, so various elements decor.
A well-chosen sign for a bath allows you to give the desired emotional mood. In addition, these simple elements not only decorate the environment, but also often carry practical significance, because a person entering your bathhouse for the first time will easily find his way around the location of the premises in the building - just hang beautiful signs on each door.
Main types of signs
There are several main types, which differ in the material from which they are made and the method of applying inscriptions and drawings. Let's look at the main types and take a closer look at the optimal options.
Plastic signs
This type has the following features:
- Low price and ease of manufacture.
- A variety of types: inscriptions can be pasted on, can be appliques, it is possible to apply the inscription by engraving.
But there are also a number of disadvantages:
- Plastic is not very suitable for rooms with high temperatures; it should never be used in steam rooms: in addition to losing its shape, the sign will emit harmful fumes.
- Such signs look quite cheap and do not fit well into wooden interiors. They can be used in public baths as information signs on plastic doors.
Glass signs
This type is different in that glass products do not cover the texture of the base and seem to float in the air; in addition, you can create original lighting, and the sign will serve as an additional light source.
Plexiglas is often used, which is more flexible and reliable than its conventional counterpart. With its help, you can create three-dimensional products of various shapes.
The disadvantages of this type are the following:
- Poor compatibility with the interior: a glass sign in a bathhouse looks alien and does not fit well into the decor.
- The fragility of the material, of course, exists strained glass and plexiglass, but still such elements create the illusion of unreliability.
As one of the options, you can note engraving on mirrors and glass doors if present, these elements look much more attractive.
Metal signs
This type does not need any special introduction; the products can be an engraved plate, or can be made using artistic forging.
Due to the characteristics of the material, this type has the following features:
- Metal sauna signs are most often used outside the building; for the durability of these elements, it is best to use stainless steel; it is durable and resistant to atmospheric influences.
- Availability metal elements It is strictly prohibited in the steam room. You can get burned on metal; in addition, constant adverse effects significantly accelerate the corrosion processes of metal, so you should not use such signs even in the shower.
- Metal does not go well with wooden rooms.
Wooden signs
Wood products deservedly enjoy the highest popularity due to a number of reasons:
- Wood is excellent and gives it a feeling of warmth and coziness, the material emphasizes a healthy atmosphere due to its natural origin.
- The excellent properties of wooden signs allow them to be used in all rooms: steam room, shower room, etc. They don't evaporate harmful substances under the influence of high temperatures, tolerate humidity well and do not heat up too much.
- To order, you can make products of any size and with any pattern - such an element will become a truly unique decoration for your bathhouse.
Most often, wooden signs for a bathhouse are made in the following ways:
- Applying inscriptions and images using laser engraving. This method is used by large companies that have necessary equipment. Any design can be applied according to an individual sketch, the price is quite high.
- Making a sign using a milling machine. This image is more prominent, which has a positive effect on the appearance. Quite a common method.
- Manufacturing by burning method- the easiest way, such signs can be made with your own hands. To do this, you need a burning device and a board, onto which you must first apply any design you like.
Even your children will be able to take part in the manufacture of these products; the instructions that come with the device will allow you to quickly understand the nuances of its operation.
Tip: if you don’t know how to draw, you can find an image on the Internet or ask a friend to draw a picture, and then use a burner to repeat the drawing. You shouldn’t buy ready-made boards; it’s much better to make an original product.
- Carved tablets are the most interesting and original version, which is in highest demand among buyers. This is not surprising, because each product is unique and inimitable, it remembers the hands of the master and conveys his mood. With the help of carving, you can even make three-dimensional figures, which allows you to turn any fantasies into reality.
- Combined products, which combine different ways manufacturing. Separately carved letters are attached to a carved, flat or embossed base. Using this method you can get very original products, in addition, you can make signs yourself using this method, which will further increase their value to you.
Tip: remember that coniferous wood emits resin, so it is better to use deciduous wood in the bathhouse.
Conclusion
Plates are a pleasant addition to the interior; they create good mood and serve as a kind of highlight that makes your bathhouse stand out from the rest. You can order products or make them yourself using one of the above methods ().
The video in this article will help you understand the intricacies of manufacturing.
How can you recognize such an institution as a bathhouse? That's right, according to the sign. But it turns out that signs can be used not only to decorate the exterior of the bathhouse, but also the interior. They will be discussed further.
Content- 1. Types of signs
- a) Plastic
- b) Glass
- c) Metal
- d) Tree
- 2. Advantage of wooden signs
- 3. Conclusion
To create a positive mood in the bathhouse, you need not only steam and a birch broom, but also a cozy interior. And one of the decorative elements are bath signs, which will help create the desired emotional mood.
Types of signs
A person who has been visiting the bathhouse for many years knows the surroundings perfectly. But if this is a newcomer who decides to visit such an establishment, then he may even be confused. After all, there is more than one room in the bathhouse, and you need to know which one to enter before entering the steam room. Therefore, signs can serve a practical role in addition to a decorative one. After all, it’s enough to hang a sign on each room, and it immediately becomes clear where the steam room is, and where the washing room is, and which door you need to enter to get to the rest room or locker room.
Although sauna signs are most often made from wood, you can also find others on sale: plastic, glass and metal. They differ not only in material, but also in the method of applying inscriptions.
a) Plastic
This material has a fairly low cost. In addition, such a sign can be given any shape. Inscriptions on plastic are glued or engraved. But still, this material has disadvantages. Such signs cannot be hung in rooms that differ high temperature. In addition to the fact that it may become deformed, harmful fumes may emanate from it. So, no matter what the cool inscriptions for the bathhouse, printed on a plastic sign, they can only be used in the locker room.
b) Glass
Glass signs have the advantage of being completely transparent. Therefore, they can be made with backlight, and this will be an additional light source. If you use plexiglass, you can even create a three-dimensional product. But still, such material looks alien in a bathhouse, especially against the background wood finishing. So glass plates are not very suitable here.
c) Metal
Metal signs may look like an engraved plate. But they can also be made using artistic forging. They are best suited for the facade. The sign must be made of of stainless steel. Metal also doesn't go well with wooden interior. And besides, you can get burned on it, so it is forbidden to use it in the steam room. And even in the dressing room, metal signs should not be hung.
d) Tree
The most ideal option is wooden inscriptions which are very popular. This material will fit well into the steam room and washing room, into the rest room and into the locker room. You can easily carve both the word “Bathhouse” and some original joke on a tree.
The advantage of wooden signs
The main advantage of wooden signs is the perfect harmony with finishing material walls and ceiling. After all, the rooms in the bathhouse should be decorated with wood. Today you can buy wooden signs for a bath that stand out not only different sizes and form, but also any inscriptions, jokes or jokes: “In a bathhouse a broom is worth more than money”, “The body soars, but the soul soars”, “The body is hot, but the soul is steamy”, “Come in, it will be hot”, “The hottest women can be found in the sauna," etc. There may be carved tablets with a burnt inscription. But there are also signs that are cut out on milling machine. The image appears in relief.
Conclusion
Signs in the bathhouse are a pleasant addition to the interior. They are a kind of highlight; with their help you can distinguish this establishment from all the others. Wouldn’t the mood be lifted by the inscription: “Dirt is not greasy, rubbed - it’s behind” or “Steam flows - the soul sings”? In our online store you can find and buy a sign for a bathhouse with almost any inscription!
The bathhouse is a great place to relax alone, with family and having fun. friendly company. However, in order for the bathhouse to be truly convenient to use, it must be equipped with a variety of accessories: hangers, buckets, lamps, etc. You can easily make all of the above and much more with your own hands from wood that is pleasant in its properties and easy to process.
Arriving at the bathhouse, the first thing you are faced with is the need to place your clothes. Nobody takes a steam bath dressed in the bathhouse! IN big room rest or dressing room, of course, you can put a full-fledged closet, but rarely anyone does this, because... free space can be taken up with much more interesting and useful things.
The best solution to the issue of storing clothes and other accessories while visiting the steam room is a beautiful wall hanger. To make this attribute, you do not need to have extensive experience in carpentry work. Just do everything according to the simple step-by-step guide.
First step. Prepare a template according to the desired hanger shape. This product can have a wide variety of appearance, but the manufacturing procedure always remains almost the same. The template can be made from paper and then quickly and easily transferred to wood. If you plan to make several identical hangers, it is better to make a template from plywood or any other thin board.
Second step. Decide how many hooks your hanger should have. Optimally - from 2 to 4. Mark the places for attaching the hooks and drill holes in accordance with the markings. Also prepare the holes with which the hanger will be fixed to the wall.
Third step. Saw the blanks to assemble the base of the hanger. So, for a hanger with 4 hooks, a base measuring about 50x10 cm and a thickness of 2-3 cm is enough. Attach the pre-prepared template to the workpiece and start milling using a rolling cutter.
If you don’t have a cutter, you can simply sand the edges of the workpiece. If desired, you can round the edges of the base or give them any other shape.
Fourth step. Make hooks. You can use ready-made hardware and attach them to the base using self-tapping screws. But it is better that the hooks in the bathhouse are made of wood. You can take, for example, a shovel handle or a mop handle as a basis.
Cut the workpiece into the required number of parts. Make a neat semicircular groove in each part. A cutter will help you with this. All hooks should be the same length unless otherwise specified by the design of your hanger.
Fifth step. Grind the edges of the cuts made with sandpaper, or even better, with a sanding machine. For the base of the previously mentioned size, four hooks 4.5-5 cm long are enough.
Sixth step. Assemble the hanger. Pre-drill small holes for screws in the ends of the hooks. Lubricate the holes with wood glue and securely tighten the hooks to the base of the hanger using self-tapping screws.
According to these instructions, you can make a hanger of any shape and size, equipping it with required quantity hooks
Do you want to decorate your bathhouse with a beautiful sign? No problem at all! You can make a beautiful outdoor or indoor sign yourself without much expense.
First step. Define optimal size future sign. To do this, first decide what exactly you will write on the sign, set the size of the future letters, and also think about how much free space should remain at the edges of the inscription.
Second step. Start making your sign. A carved product is best suited for a bath. Use a board with a thickness of 2 cm or more. You can buy a beautiful blank in a specialized store or make it yourself. The best materials to use are fiberboard or even solid wood. If they are not available, plywood will also work. Sand the base of the future sign with sandpaper.
Third step. Transfer the outlines of the letters to the workpiece. To do this, it is better to first prepare a stencil on paper, and then simply transfer the letters onto the wood. You can draw the inscription yourself or print it on your computer.
Fourth step. Cut out the sign text using a router. You can cut out the space around the letters or the inscription itself. If you don’t have the proper experience, first get your hands on some unnecessary piece of wood. This way you can choose the optimal cutting depth.
Bathhouse sign “Oak leaf”
Fifth step. Sand the sign and proceed to finishing. At the end, the sign can, for example, be varnished, treated with stain or other compositions suitable for wood finishing. At this point, be guided by your own preferences.
Sixth step. Hang a beautiful homemade sign in the right place. To fix the product on the wall, you can use nails, brackets and even a simple rope. Here, decide for yourself which mounting option will be more appropriate and convenient.
It is impossible to imagine a traditional Russian bath without a comfortable wooden bucket. There is absolutely nothing complicated in making this bathhouse accessory with your own hands. You just need to prepare the necessary supplies and carefully complete each stage of the work.
Bucket making kit
- Planks. It is better that they are made of linden or oak. Planks about 40 cm long will be enough. 1 cm thick will be enough.
- The blank for making the bottom is about 2 cm thick. Select a diameter of about 25 cm.
- Metal hoops in the amount of two pieces.
- Carpentry supplies.
First stage. Execute pre-treatment blanks for the bottom of the bucket. You need to carefully grind off the end of the bottom in a circle. A stitch to a depth of about 1 cm will be sufficient.
Second phase. Prepare the recesses in the boards. The recesses should be located in the places of future attachment to the bottom and have a depth of about 0.4 cm and a width of about 1.2 cm. You will later install the bottom of your homemade wooden bucket into these recesses.
Third stage. Process the longitudinal edges of wooden blanks using a plane. It is necessary to process at such an angle that in the future it will be possible to tightly fit the boards to the diameter of the bottom. Adjust the planks to each other. Secure the boards around the bottom with a metal hoop. For reliable fixation, a hoop about 5 cm wide will be enough. Place the second hoop about 10 cm below the top border of the homemade bucket.
Fourth stage. Make a handle. To make it, you can use, for example, a thick rope. Metal handles are not used in the bathhouse. They will become very hot in the steam room and may cause harm to visitors. If you wish, you can make a full-fledged wooden handle.
After assembling the bucket, fill it with water. Water will begin to pour out of the cracks - this is a natural process, because... Wood needs some time to absorb moisture and swell. Very soon the cracks will disappear on their own, and you will be able to use the bucket you made yourself.
Using the same technology, you can assemble wooden troughs, ladles and other accessories necessary for a bathhouse.
To maintain the interior of the bathhouse in the same style, it is recommended to make even such small things as lamp shades from wood. Even the simplest grille around a lighting fixture will add a special charm to the environment.
First stage. Assemble the frame for the lampshade. You can give it any desired shape. For wall lamps Semicircular and rectangular shades are best suited. The corner lighting fixture can be equipped with a trapezoidal or triangular shade.
Assemble the frame from wooden slats. Pull the base of the desired shape using any in a convenient way, for example, using corners or a tongue-and-groove connection.
Second phase. Prepare the slats. Select the length in accordance with the dimensions of the base. Round off the sharp edges of the slats and carefully sand the surface of the wood to give the shade a more elegant appearance.
Third stage. Attach the prepared planks to the wood using self-tapping screws. You need to fasten it from the inside of the lampshade.
At this point, the process of making a wooden bathhouse lamp is considered complete. All that remains is to put it on the lighting fixture. If desired, you can varnish the product or process it in another way.
Collateral successful operation baths is availability high-quality ventilation. Typically, the ventilation device comes down to creating a pair of ventilation holes. To prevent penetration through these holes various kinds rodents and other third-party objects, they are covered with ventilation grilles.
You can make grilles for bath ventilation yourself, but it is best to make them from wood.
First stage. Assemble the frame ventilation grille. To make a frame, use wooden slats. Traditionally, rectangular or square shape. Select the size according to the dimensions of the ventilation hole. It is necessary that the grate extends beyond the boundaries of the hole by several centimeters on each side.
Fasten the slats to form a frame. You can use any convenient fastener.
Second phase. Place slats on the frame. Select the number, width of the slats and the pitch between them so that the grille looks beautiful and nothing interferes with air circulation. Usually a step of 3-5 mm is taken. Use self-tapping screws to attach the slats to the frame.
Third stage. Fix the finished grille onto vent. Make sure that the grille is secured evenly in all positions. To attach the grille to the wall, you can use the same screws or other available fasteners.
Thus, in self-production Bath accessories are absolutely nothing complicated. We have presented to your attention instructions for assembling the most useful and necessary devices in the bathhouse. Follow the recommendations received and everything will work out.
Good luck!
Video - DIY bath accessories
