Is it possible to paint plastic slopes near the window? Reminder for proper painting of window slopes

To start slopes must be white, clean, dust-free appearance. You need to achieve this using finishing putty and sanding it with abrasive sandpaper. On external corners perforated slopes must be installed aluminum corners, read about how to do this here.

After cleaning the putty, the slopes should be primed deep penetration. Attention: if during the process the primer gets on plastic frame windows or glass, remove it immediately with a damp cloth. The window sill should also be protected from contact with primer (for example, polyethylene secured with masking tape).

As soon as the primer has completely dried, we proceed to the next stage - we cover the window frame with masking tape. It is important to do this work carefully and correctly. Apply wide masking tape. It should be glued along the entire perimeter, including the junction of the slope and the window sill.

The strip of tape should run smoothly without bends, and be pressed as tightly as possible against the supporting frame of the window. Glue the tape along the entire length of the junction of the slopes to the frame with your hands, and then press it as hard as possible with a plastic spatula, this is necessary so that during the main work the paint does not flow under it, this is especially important in the corners of the window opening.

Painting slopes

As for the quality of the paint, it's up to you to choose. What paint to paint hardboard doors? Everyone has different financial capabilities, but I still recommend not to buy cheap paint. When choosing, rely on the following three criteria:

1. Over time, as it becomes dirty, the paint should be easily washed off with a foam sponge.
2. Use acrylic, its service life is longer than that of a regular water-based one. When purchasing paint, pay attention to the manufacturer's instructions on the can. Some types of paints have a purely individual composition.
3. If you order online, it will be much cheaper, and if, on top of everything else, you buy using cashback, it will be 2 times cheaper! The same goes for purchasing household appliances or new furniture!

Open the can of paint and mix it thoroughly. Pour a small amount of paint into the tray. Painting should begin from the top slope, moving to the sides.

IN hard to reach places For connections we use a flute brush.

List of tools needed for painting:

• Paint roller
• Flute brush
• Paint tray
• Pliers or screwdriver (for opening paint cans)

Try to roll out the paint evenly with a roller without putting too much pressure on the tool, otherwise greasy streaks and streaks will appear. Before applying paint to the slope, first roll it out with a roller in a paint bath. What paint is best to paint a plastic surface? Attention: the work is done in one breath; under no circumstances should you take a break, leaving one of the sides window slopes partially painted.

If you do this, the paint will dry out and, continuing to work, you will put an extra layer on top of the already painted one. Thus, in this place, at a certain angle and lighting, a non-uniform spot will stand out. If you don’t want to paint the slopes in two approaches, then apply the paint as thick as possible.

But again, I remind you, make sure to apply the paint evenly with a roller.

Once you've painted, peel off the masking tape immediately! Do this carefully without haste, being careful not to touch the fresh paint with your hands. Why do you need to remove the tape right away? I answer: the fact is that as soon as the paint dries, it forms a single film, including the paint that got on the masking tape. And when you remove the tape from the window frame, you will pull the dried paint behind it.

This results in an uneven painting border; the appearance of such work, to put it mildly, is not very good! If for some reason you have not removed the tape from window frame, and the paint has dried, then do the following; Using a standard paint knife with replaceable blades, cut the paint along the entire paint border. After this, you can safely tear off the tape.

Do not under any circumstances try to dry paint with any electrical appliances (heater, hair dryer). The paint must dry naturally, otherwise it will become covered with small cracks, or even completely move away from the base in large “scales”.

If the slopes are not cleaned very well and have large scratches, then use a roller with large pile. Such a roller will easily hide all the flaws of both the putty and its stripping.

For those who would like to make slopes from plasterboard with their own hands, see a fairly simple way to do this.

Additional Information:

If the space near the windows is kept dry, then you can use a water-based emulsion. Even the most expensive composition will not be able to live up to expectations if it is applied in violation of technology. It involves thorough surface preparation. The slopes are treated with an antiseptic, and then a layer of moisture-proofing primer is applied to them.

In this case, you can get a guarantee that the paint will not peel off in the first winter and will be pleasing to the eye until major repairs.

It is immediately worth noting that oil coatings for interior work- Not the best option. The thing is that these coloring mixtures evaporate toxic compounds into the air. If the odor and health impact outside are minimal, then indoors you need to choose a different option.

Paint for window slopes must be safe and not harmful to health.

Budget repairs can be done using oil paint, which is known to have good moisture resistance. The resulting protective layer has a good gloss and is easily washed off from dirt. Unfortunately, choosing such material is still a lottery.

Often, after several years of use, a smooth surface becomes covered with cracks, and the coating itself begins to peel off, so it is better not to save money and choose oil paint famous manufacturers.

How to paint the slopes on the windows? First, you need to decide what kind of work needs to be done - internal or external. The choice of paint depends on this. For exterior work, in most cases, drying oil paint is used, and for interior work, water-based paint can also be used.

Paint for window slopes must be resistant to external negative factors, including ultraviolet radiation.

Probably, everyone who has installed plastic windows is familiar with the situation when a beautiful, freshly installed double-glazed window is framed by uneven slopes intended for old frame. Of course, it is possible, together with double-glazed windows, for an additional fee, to perform window decoration, and you can save a little. To do this, you just need to purchase material for leveling the surface and paint for the slopes.

The exterior of the slopes should also be finished to ensure that dust and moisture cannot seep into the room. If there is an excess of moisture, fungus and mold may appear on the slopes. At what temperature can a metal fence be painted outside?

Let's look at what and how to paint window slopes indoors and outdoors.

When doors in old apartments are replaced and new ones, wooden or metal constructions, the owners of the premises, in order not to dismantle the walls, decide not to install slopes made of plastic or laminate. They stop at installing one door.

The question immediately arises: is it necessary to paint the slopes? What is the best paint, and is any preparation necessary?

Preparatory work

When doors are installed, cracks often appear on the walls and large chips are visible. They need to be sealed. Before painting, preparation is carried out. The following technological work must be performed:

• filling cracks;
• sealing cracks;
• removing old coating remaining on the wall;
• surface leveling;
• sealing with sealant or special solution formed cracks;
• priming the leveled surface.

Coloring

Paint selection

Slopes are divided into several types:

• external;
• internal.

Therefore, the choice of material for painting depends on what type of paint will be painted. It is better to paint the exterior vapor-proof paint. It will protect the surface from mold and the accumulation of large amounts of moisture.

For internal parts You can use water emulsion. Regular enamel and acrylic are also suitable. It is advisable to choose white shades. This color will not greatly attract the attention of passersby.

Besides, White color visually expands the room. The room becomes much brighter, as the light from the lamps will be reflected from the painted surface.

Before you start painting, you need to wait until the primer is completely dry. Otherwise, the coating will begin to form lumps, and the work will have to be done again.

Water-based compositions create a matte finish. The enamel always shines. The acrylic composition does not react to Sun rays and other light, its properties do not change under the influence of ultraviolet radiation.

The choice is always individual, it depends on the design and interior of the room. The selection of the desired dye is made taking into account the place of its use.

Design of slopes and adjacent walls

Coverage Requirements

It should create a beautiful appearance so that the door does not get lost and looks attractive.

The resulting film should be very strong. When washing the surface, scratches and cracks should not appear.

The paint must be suitable for the operating conditions. If this is a bathroom, it should have increased resistance to moisture.

Painting of the external sides should be carried out with a special composition that will not react to temperature fluctuations and atmospheric influences.

Any composition must necessarily correspond to all modern requirements ecology.

Slope installation

Painting drywall

If the slopes are made of plasterboard, when choosing a coloring composition, several important criteria must be taken into account:

• it should be easily washed off even after ten years;
• compound;
• manufacturer.

From practical experience, the best options for decorating drywall are:

• Tikkurila, Finland;
• "Condor", Germany.

Finnish belongs to the group of elite paints, so it is very expensive. The German one has similar quality, but costs a little less. But in any case, everyone chooses for themselves what paint to buy for a plasterboard slope. It all depends on financial capabilities and personal preferences.

Interior decoration

Professionals advise interior painting to be done with only a few compounds.

1. Water-based acrylic. Easy to apply to the surface, dries quickly. After painting, a very durable film with water-repellent properties is formed. Suitable for bathroom or kitchen. Since this paint is diluted with water, it has no odor and does not emit toxic substances.
2. Acrylic latex. Properties are similar water-based paint. Latex additives increase the strength of the film and make it more moisture resistant. This paint sparkles with a beautiful gloss.

Plastering slopes

Finishing of external slopes

When painting slopes from the outside, the dyes are subject to more high requirements. Latex has these properties. acrylic compositions with special additives. When purchasing, pay attention to the packaging. It must be written “For outdoor use.”

Alkyd compositions, which are based on organic solvents, are used to paint any surface. They can withstand large temperature changes. The disadvantage of this paint is its toxicity. Work should be carried out only with a respirator and gloves.

Epoxy paints are highly durable. They look beautiful, but are very expensive. Only specialists can work with such compositions; beginners have many problems. They are rarely used for painting. They can be replaced with other inexpensive coloring compounds that have excellent protective characteristics.

Selection of shades

Today on the market you can see huge assortment the most colorful products different colors and shades. You can, of course, paint the slopes any color. However, usually door slopes painted predominantly white or light shades. Therefore, if you make the door design too bright, it can disrupt the harmony of the entire interior. According to the designers, interior decoration It is better to do in certain color combinations:

• white, differing from the color of the partition by several tones;
• painting that imitates expensive types of wood - this looks especially beautiful on doors when wooden panels are installed in the room.

When exterior painting is carried out, it is advisable to select a color so that it harmonizes with the color of the facade.

Plastered and painted doorway

Painting technology

Before starting work, you need to prepare all the tools in advance. To work you will need:

• roller;
• to paint joints, you need to prepare a narrow brush;
• masking tape.
• container for paint.
• rags.

Painters recommend using a roller or a special brush. It is desirable that the dimensions of the roller are not very large. The sponge must be made from natural fur and be with short pile. If the pile is very long, the coloring composition may splash. Splashes will fall on door frame and canvas.

To paint the joints well, it is best to use brushes. Other areas are painted only with a roller. This technology allows you to get even coloring and save coloring agent.

Before painting, dust is removed from the surface. The entire perimeter of the door is covered with masking tape. It will protect the canvas from paint. In addition, the door must be additionally closed plastic film. This protection will help keep the canvas completely clean.

First the joints are painted. The work is done with a thin brush. There should be no breaks in the paint layer. The top is painted with a roller. When the painting of the horizontal surface at the top is completely finished, the side bases are painted. Craftsmen advise painting slopes in one layer. But if you decide to apply several layers, then the next one can be applied only after the previous one has dried.

When painting is finished, you need to immediately remove the masking tape. If this is not done, it will dry out, stick to the door, and it will be very difficult to remove it.

Decorative painting slopes

Safety precautions

Painting work always requires compliance with safety rules. Painting a surface with a strong paint smell should only be done with a respirator.

The room should be well ventilated after completion of work.

You can learn how to quickly paint slopes by watching a short video instruction.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

Grade

Latest reviews

adminadmin

Probably, everyone who has installed plastic windows is familiar with the situation when a beautiful, freshly installed double-glazed window is framed by uneven slopes intended for the old frame. Of course, you can complete window decoration along with double-glazed windows, for an additional fee, and you can also save a little. To do this, you just need to purchase material for leveling the surface and paint for the slopes.

Leveling material

Everyone, even a beginner, knows that the choice of paint depends on the material from which the base is made. To align a window opening indoors, it is customary to use:

• drywall;
• plaster mixtures.

External slopes can only be leveled using cement mixtures, gypsum and chipboard for street decoration are not used due to the vulnerability of materials to the influence of atmospheric phenomena.

Which paint to choose

The dye is selected taking into account where it will be used. The main requirements for the coloring agent are:

1. Aesthetic appearance, because the main purpose of the chosen paint is to create a worthy frame for a plastic window.
2. Strength and abrasion resistance (the film formed after drying should not be damaged when washing the surface).
3. Compliance with operating conditions (for example, for a bathroom this will be increased moisture resistance, and for outdoor work - the ability to withstand atmospheric conditions and temperature changes).
4. Environmental friendliness (this requirement is mandatory for residential premises).

For interior decoration

Based on these requirements, experienced craftsmen It is recommended to use the following compositions for interior work:

1. Acrylic water-based. Easy to use, after drying they form a durable, beautiful film. They dry quickly, are easy to apply, have water-repellent properties and are suitable for painting slopes on bathroom or kitchen windows. Due to the fact that the solvent for such enamels is water, the compositions are non-toxic and almost odorless.
2. Acrylic latex. They have the same properties as water-based ones, but the presence of latex additives in the composition increases their strength and moisture resistance. In addition, the addition of latex gives the dyes a beautiful gloss. If desired, you can purchase a coloring solution from glossy, which beautifully reflects light, to matte, emphasizing the beauty of the window opening.

For exterior finishing

1. Acrylic latex with high protective and decorative properties. But it's worth considering important rule: latex without additional additives is not sufficiently resistant to temperature changes and quickly breaks down. If you purchase latex paint for slopes, then the packaging should indicate: “For external use.”
2. Alkyd, based on organic solvents, are suitable for any substrate and can withstand temperature changes. The downside is that they are highly toxic; you can only work with them wearing gloves or a respirator.
3. Epoxy. Durable, beautiful, but expensive, and it can be difficult for novice craftsmen to work with them. They are rarely used for finishing windows due to the fact that there are more affordable coloring compounds with excellent protective and decorative qualities.

It is not enough to choose only the composition of the dye. To make the window look impressive, you need to choose the color.

Choice of colors

Manufacturers of paints and varnishes offer a wide color palette.

You can paint it any color, but keep in mind that plastic double glazed windows have a traditional white color, and are too bright color design windows can add dissonance to a carefully thought-out interior.

1. A shade of white, which will differ by 1-2 tones from the glass unit.
2. Painted to match light wood species. This option will become great solution for rooms with wooden panels.

Required Tools

Finally, the composition and color of the dye have been determined, now it’s time to choose necessary tools, and you can start finishing the window. To make a quality finish, you will need:

• tools for leveling the surface (if necessary);
• masking tape;
• dye tray;
• gloves;
• painting tool.

1. Give preference to small and medium-sized rollers.
2. Choose a “coat” for the roller from a sponge or natural fur with short pile. This is justified by the fact that rollers with long piles can splash paint compositions, and the splashes can get on glass or plastic.
3. It is better to use brushes only for painting joints, and paint the remaining areas with a roller. This will allow you to achieve even coloring and save material.

Preparing for painting

Preparing a window opening for painting plays a huge role, because in sunlight all surface imperfections will be visible. Therefore, before painting, it is necessary to carefully prepare the base. To do this you need:

1. Carefully inspect the surface using a portable lamp and level out any uneven areas or dents. Drywall does not need leveling, but unevenness may appear on chipboard or plaster. After eliminating all the deficiencies, it is advisable to re-inspect the lamp.
2. Pour the primer into a container for dipping the roller, prime the surface thoroughly and allow to dry. Inspect again with a lamp. If there is a possibility of uneven application of the soil, then repeat the procedure.

After the primer mixture has dried, you can begin to paint, evenly distributing the selected dye using a roller. It is recommended to paint in two layers, the first one should be applied evenly from the wall to the window, and the second one should be applied up and down.

If the paint is selected in accordance with all requirements, and Finishing work were carried out in compliance with all necessary steps, then the result will be a beautiful window opening.

Hide

The inside of the window loses its original attractiveness over time. The paint peels off, dirt or scratches appear. To correct the appearance, you need to put the surface in order. This can be done by painting it. But how to paint the slopes on the windows inside? There are many types of coloring mixtures, and at first glance, it is difficult to understand this variety. Let's look at the main types of paint coatings and their features.

Choosing paint for interior work

It’s worth noting right away that oil coatings for interior work are not the best option. The thing is that these coloring mixtures evaporate toxic compounds into the air. If the odor and health impact outside are minimal, then indoors you need to choose a different option. Paint for window slopes must be safe and not harmful to health.

Acrylic and water-based coatings are considered the most suitable, since they contain no volatile compounds. But the final choice depends on the type of surface.

1. Concrete. In this case, acrylic compounds are suitable.
2. Plaster. Water-dispersed mixtures are used here.
3. Tree. Water-dispersion coatings with organic solvents, enamel or acrylic look best on it.

Metal. If the work area is made of metal, then it is better to use silicate or water-dispersed mineral-based mixtures.

Installation window sills DIY tips and videos

When working with slopes, you will find the instructions for removing a plastic window useful.

Advice: if you don’t want to select a specific paint and worry about how to paint the slopes on the windows, then choose silicate or silicone. These types are suitable for any surface and will last a long time. Try not to skimp on paint coatings, because cheap options will quickly deform and crack. In this case, you will have to pay twice.

Preparing for work

First of all, prepare the surface for painting. If it is concrete, it is first putty, eliminating unevenness. Otherwise, after painting all the flaws will be visible. Also repair cracks and chips. They can grow at the most inopportune moment.

Is the work area wooden or plasterboard? If it does not have significant damage or cracks, feel free to get to work. If there are significant irregularities and holes, they need to be covered up and rubbed. Do the same with seams if they have cracks and holes.

What will you need?

• For painting, as for any other repair work, required: .
• Spatula for leveling the surface
• Paint for window slopes
• Brush or roller for coating
• Painting tape - this is useful to protect the window frame from stains
• Container for diluting or mixing formulations
• Wear gloves to avoid contact with dyes. Many of them have a negative effect on the skin.
• Safety belts or any other devices. This is only necessary if the work is carried out outside and at height.

The most important thing is that the roller is good quality, preferably new.

Important: do not forget about which room the work is being done. If painting slopes takes place in the kitchen, then the mixture should be glossy. It is easier to scrub off grease that settles from the kitchen air. Matte paint absorbs all the secretions that form during intense cooking. An important fact that will greatly simplify the care of your kitchen window.

Painting technology

The paint has been selected and the surface has been treated. ? On windows with inside Apply masking tape where paint may get in. If stains and drops are easy to remove from glass, stains from plastic or wood are more difficult to remove. Usually about 5 cm are sealed, starting from the outer edge of the frame, where contact with the brush occurs. Are you using a roller? First, dip it completely into the jar, then work a little on a test surface (a piece of cardboard or paper). If the roller is completely saturated with the coloring agent and leaves an even mark, proceed to work.

In hard-to-reach places, such as corners, the coating is applied with a brush. The roller is more suitable for wide areas where working with brushes is tiring. Paint for slopes should be applied in an even layer. Otherwise, spots will form after drying: the layer will have a different density.

Roller selection the right size will allow you not only to save on paint coating, but also to get the job done faster and make it easier to clean up after it’s finished. A roller that is too large or fluffy will leave marks and splatters on the glass and surrounding surfaces. A small one will leave more room for maneuver and will reduce paint consumption.

If the surface to be painted has first been primed, then you need to wait at least 6 hours. After this, the first layer is applied. Repeat the waiting period of 6 hours and apply a second one. The thing is that concrete absorbs moisture, and a single layer may not be bright enough. If finishing work is carried out with outside, the second layer is optional.

Rework plastic windows in premium designer, lamination and decorative triplex

About what types of slopes there are, about their prices and consumer reviews

It is important to monitor the room temperature: not lower than 16 and not higher than 21 degrees Celsius. Higher or low temperature will lead to deterioration in the quality of painting. Masking tape or masking tape is removed after the second layer has dried. Stains are removed from the glass with a scraper, and from the frame - with a damp cloth or sponge. If you follow all these rules, the question “how to paint the slopes on the windows inside” will not worry you.

Exterior painting

The outer side of the frame does not require special attention to the type of coating, because all the fumes will end up in the street air. This means that the concentration hazardous substances will be negligible. Therefore, you can choose any type. It all depends on the durability of the composition. Nobody wants to constantly paint over cracks and bubbles that appear.

What to paint with? Emulsion mixtures are suitable. If your budget is limited, or you simply don’t want to spend money, use regular oil. It is short-lived, but has an attractive appearance and a wide selection of colors. This great option For country house, Where special costs are not planned.

Dear visitor to my blog! About how important appearance is window openings, why is it necessary painting slopes on windows , I think you yourself know. Therefore, I will not engage in demagoguery on the importance of this work and will immediately get to the point.

Preparing to paint slopes

Afterwards, the slopes should be treated with a deep penetration primer. Attention: if during the process the primer gets on the plastic window frame or glass, then immediately remove it with a damp rag. The window sill should also be protected from contact with primer (for example, polyethylene secured with masking tape).

As soon as we proceed to the next stage - cover the window frame with masking tape. It is important to do this work carefully and correctly. Use wide masking tape. It should be glued along the entire perimeter, including the junction of the slope and the window sill. The strip of tape should run smoothly without bends, and be pressed as tightly as possible against the supporting frame of the window. Glue the tape along the entire length of the junction of the slopes to the frame with your hands, and then press it as hard as possible with a plastic spatula, this is necessary so that during the main work the paint does not flow under it, this is especially important in the corners of the window opening.

Painting slopes

As for the quality of the paint, it's up to you to choose. Everyone has different financial capabilities, but I still recommend not to buy cheap paint. When choosing, rely on the following three criteria:

1. Over time, as it becomes dirty, the paint should be easily washed off with a foam sponge.
2. Use acrylic, its service life is longer than that of a regular one. When purchasing paint, pay attention to the manufacturer's instructions on the can. Some types of paints have a purely individual composition.
3. If you order online, it will be much cheaper, and if on top of everything else, it will be 2 times cheaper! The same goes for buying household appliances or new furniture!

Open the can of paint and mix it thoroughly. Pour a small amount of paint into the tray. Painting should begin from the top slope, moving to the sides. In hard-to-reach junction areas we use a flute brush.

List of tools needed for painting:

• Paint roller
• Flute brush
• Paint tray
• Pliers or screwdriver (for opening paint cans)

Try to roll out the paint evenly with a roller without putting too much pressure on the tool, otherwise greasy streaks and streaks will appear.Before applying paint to the slope, first roll it out with a roller in a paint bath. Attention: the work is done in one go; under no circumstances should you take a break, leaving one side of the window slopes partially painted. If you do this, the paint will dry out and, continuing to work, you will put an extra layer on top of the already painted one. Thus, in this place, at a certain angle and lighting, a non-uniform spot will stand out.If you don’t want to paint the slopes in two approaches, then apply the paint as thick as possible. But again, I remind you, make sure to apply the paint evenly with a roller.

Tips for painting slopes from personal experience

Once you've painted, peel off the masking tape immediately! Do this carefully without haste, being careful not to touch the fresh paint with your hands. Why do you need to remove the tape right away? I answer: the fact is that as soon as the paint dries, it forms a single film, including the paint that got on the masking tape. And when you remove the tape from the window frame, you will pull the dried paint behind it. This results in an uneven painting border; the appearance of such work, to put it mildly, is not very good! If, for some reason, you did not remove the tape from the window frame and the paint has dried, then do the following; Using a standard paint knife with replaceable blades, cut the paint along the entire paint border. After this, you can safely tear off the tape.

Do not under any circumstances try to dry paint with any electrical appliances (heater, hair dryer).The paint must dry naturally, otherwise it will become covered with small cracks, or even completely move away from the base in large “scales”.

If the slopes are not cleaned very well and have large scratches, then use a roller with large pile. Such a roller will easily hide all the flaws of both the putty and its stripping.

For those who would like to make slopes from plasterboard with their own hands, look pretty such work.

Good luck with the renovation!