Will decorate any children's party, party, birthday. Making your own balls is quick and easy. The work does not require special skills or expensive equipment, and the balls will glow and delight with their radiance for more than three days.
Choose the color of the balls and LEDs
For a children's party, it is better to use colored LEDs, or select a luminous element to match the interior of the hall. For weddings, white LEDs are often used - they glow brightly in the night sky and are a good replacement for Chinese sky lanterns.
Important!
The darker the room, the brighter the balls will glow. Therefore, it is better to launch at night.
If you have theme party in blue and white or blue colors, then it is better to put a white LED in the blue ball. It glows brighter than blue. In a green ball the color is almost invisible, in a pink ball it is visible. Yellow, orange and red balls can easily use a red LED - it is the brightest of all.
First of all, you need to connect the battery and the LED. To do this, use electrical tape, masking tape or ordinary tape.
Important!
Pay attention to the polarity of the battery and the LED - you need to apply the elements plus to plus, minus to minus. If they are connected incorrectly, the LED will not light up.
Both elements have a larger and a smaller surface. Large is a plus, smaller is a minus. Taking this into account, connect the battery and LED and wrap it with electrical tape. Now the LED is not going anywhere. Using this scheme, we prepare all the LEDs that you intend to use - plus to plus, wrapped, put aside.
If you purchased transparent or white balloons, it would be better if the colored trim did not stand out from the balloon. In this case, we recommend using transparent tape.
It is also very easy to attach an LED with a battery using sausage balls, which are also used to make “dogs”. Take the ball and cut it into pieces about 2 cm long - we get rubber bands.
You insert the scissors into the rubber band, move them apart, and insert the battery and LED inside the rubber band, remembering the polarity “plus to plus.” This rubber band tightly holds the LED on the battery and covers the legs, which will not tear the ball when inflated.
If you are lucky and you bought large balls, then the LED can easily get inside. If the ball is small, then you need to carefully push it deep into the ball.
Important!
Better take big balls.
You can also stretch the ball and put LEDs inside. It will be much faster. In addition, by stretching the ball, you additionally test its strength. And if there are holes in it, then it will break.
Inflating the balloons
When you inflate balloons, you must protect your eyes, because no matter how good the balloons are, there will definitely be holes in them. And when the ball bursts and the LED flies out, it can injure your eyes.
Important!
We put the ball on the gas cylinder. You need to inflate it until a small balloon appears. If you overinflate a balloon, deflate it a little because an overinflated balloon will pop on its own. We make a drop-shaped ball and tie it with a ribbon.
Balloons and bright lanterns are a common attribute of many holidays. Separately they are good, but together they are even better. Creating glowing balls will not take much effort or free time, but the result will exceed all expectations.
You will need: ordinary multi-colored balls, button batteries, LEDs, scissors, adhesive tape, eye protection glasses, gas cylinder, as well as ribbons to tie the balls.
Video instruction: How to make glowing balloons with your own hands.
Today, when the “handmade” trend is in trend, making things with your own hands for the home is relevant and also rational. Great solution as decorative element there will be inflatable balls with glowing lights inside. This, of course, will not be a full-fledged lighting fixture, but it will fit perfectly into the interior, as a festive decoration for a birthday or any other holiday.
Most often, LEDs are placed in balloons. But other devices can also serve as a light source. This article will tell you how you can make such a beautiful and unique part of the interior with your own hands.
Various formats
Balloons are a common decoration for any occasion: birthday, New Year, wedding anniversary, etc. But if you insert a luminous element such as LEDs into them, you will receive a unique interior design element. And by making such lamps yourself, you will not only surprise your friends, but also delight your child.
Most main detail There will be a light source here - an LED. It directly determines how beautiful and bright the ball will turn out.
Today's glowing Balloons You can make it yourself from the following light sources:
Ball with tablet
- glowing tablet element. It is a widely used lighting option. The light source here is an LED tablet. Making such a design is quite simple, and the light source itself will easily fit into any type of ball. The glowing “heart” will look especially beautiful here. But such a tablet is not suitable for large-scale illumination, since it is not capable of creating uniform illumination of the ball. Here only the bottom of the inflatable product will be illuminated, since the tablet has sufficient weight. Sometimes the glow is not noticeable at all if viewed from a certain angle. Another disadvantage of this design will be the short glow period;
- glow stick. In its middle, the stick contains an LED (some sticks use several diodes). In addition to the LEDs, it has a built-in battery for autonomous power supply. Making such a luminous ball is quite easy and quick. But the disadvantage of this design is the sufficient weight of the stick and its noticeable location inside the inflated ball. As a result, such a balloon cannot be filled with helium. But for a party this is quite enough;
Note! You can buy such a stick in a specialized store, or you can make it yourself from improvised materials.
Balls with a stick
- fixed stationary LED. This option will be the highest quality solution for independent organization balloon illumination. This assembly option has gained popularity because it is possible to place the LED higher. In addition, LEDs for balls can be found much easier than a tablet or stick. This is an option for any life situation.
Note! A big advantage of using stationary LEDs to illuminate inflatable products is their ease of operation. This balloon can be inflated with either gel or regular air.
LED balls
Whatever option you choose to create “space balls”, you can do everything yourself. The complexity of the whole design lies only in presenting the inflatable ball and the LED as a single whole.
Preparing materials
In order to quickly mount such an original inflatable ball, depending on its type, you will need the following materials:
- air balloons;
- 3V batteries for the wand;
- LEDs 3V;
- hot glue or tape;
- LED flashlight for tablet assembly.
From the tools for empty assembly, you can use glue guns and a soldering iron.
Preparing for work
To make a glowing inflatable ball with your own hands, you must follow the assembly instructions:
- First of all, you need to decide on the type of inflatable balloons. Using this method you can highlight a ball of any color. Usually multi-colored ones are used at holidays, but for a wedding or party you can choose balloons of a certain type. color range(if there is any special theme of the celebration). In addition to the usual round products, you can use shaped and oblong balls here. The simplest lighting will be for standard and oblong products;
- after that, we decide on the type of backlight to use: stick, tablet or stationary LED. Further in the instructions we will stick to the situation of installing the LED, since this is the most optimal option;
- choose LEDs. For a birthday, you can use colored LEDs, but for a wedding it is better to stick with white ones. Their light in the night sky will be especially bright and festive. Do not insert an LED of the same color into the ball. This will make its glow invisible;
Note! The choice of LED color should be made based on the shading of the room in which the holiday will be held. When the room is brightly lit, the illumination of the balls will be almost invisible, no matter what color you choose. And in dimly lit rooms they will show your craft in its maximum beauty. Therefore, such products will fit perfectly into any party.
LEDs
- ⦁ next we connect the LED to the battery. For attachment, you can use electrical tape or regular tape. It is better to use tape, as it will not interfere with the LEDs. On at this stage It is important to make the connection correctly. Therefore, pay attention to the polarity of the battery. All elements must be connected minus to minus and plus to plus. The larger part on the battery is a plus, and the smaller part is a minus. Otherwise the LED will not light up. Checking for correct connection should be done immediately, and not already in the ball;
- check the connection for strength. All elements must be firmly fastened. Otherwise, when placing this structure inside the ball, the batteries may simply fall out.
Using this scheme, we prepare LEDs for all the balloons that will need to be inflated and illuminated. The first element will take you a few minutes, but each subsequent element will go like clockwork.
Now we have all the elements to assemble this inflatable decorative item holiday.
Let's start assembling
The most important and crucial moment remains - to connect all the elements into a single structure or place LEDs in balls. The easiest way to assemble an LED-battery device is, of course, to fit into large balls. But if the product is small, then everything should be done very carefully so as not to pierce the ball itself or interrupt the contact between the battery and the diode.
Assembly proceeds according to the following scheme:
- we check the strength of the prefabricated device;
- stretch the hole in the ball and carefully push the LED with the battery inside. In addition to introducing the LED, stretching allows you to test the strength of the product. If there is a defect or hole in it, it will definitely break at this stage;
Plowing device
- after that we inflate the balloon. Here, to prevent eye injury if the product ruptures, be sure to wear safety glasses. You can inflate either with your mouth or with a balloon;
Note! The ball, if it has a standard configuration, should take on a teardrop shape. Do not overinflate the product, otherwise the risk of it bursting increases during operation of the LED.
- we tie the ball with a bright and beautiful ribbon and the work is completed.
As you can see, it’s easy to make LED balls with your own hands. Just follow the instructions above and your holiday will be a success!
Lighting in the kitchen small apartment
Choosing a lamp for a bathroom mirror, placement options
Balloons can be considered the most striking and sought-after decoration for any holiday; preparing them for a celebration is very simple, and modern advances in the field of decoration have made them indispensable elements for decoration. The ability to fill balloons with light gas - helium - allows you to create flying elements that have a special attractive force and do not leave anyone indifferent.
Filling balls with various contents (smaller balls, sparkles, etc.) is not new today, but adding a luminous element to a ball gives more opportunities to decorators. You can apply to decorate your holiday with such a new product by clicking on the link Glowing balls.
Instructions
In order for the glowing balls to have a long service life, consistency must be observed.
- Before starting production, decide on the color of the balls and select the color of the LEDs accordingly. It is better to arrange a children's party in bright colors, and, for example, a wedding - in gentle ones.
- Let's start manufacturing: the design for the backlight is quite simple, it is an LED and a battery, they should be connected, observing the polarity. The connected elements are wrapped with matching electrical tape, or a small piece of a long narrow ball, about 2 cm long, is put on them.
- The next step is to place the connected battery and LED into the ball. If the entrance hole is narrow, widen it and push the light source inside, stretching the ball to test its strength.
- Inflation. To perform this process, you should follow safety precautions and use safety glasses, since if the balloon bursts, its internal contents may fly off into your face. Try not to overinflate the balloon to prevent it from bursting, always leave it a little soft, this will extend its life.
Materials
Using a minimum of items, you can make excellent glowing balls for your holiday:
- balloons of various colors;
- small coin batteries;
- LEDs;
- scissors;
- insulating tape;
- helium balloon;
- eye protection glasses;
- ribbons for balls.
When decorating a party with glowing balls, remember that they will look more impressive indoors with low lighting, and outdoors - in dark time days. Compositions made from luminous balls will help you plunge into a magical atmosphere and will become the highlight of your holiday.
Even ordinary inflatables colorful balls immediately create a feeling of celebration. And if they also fly or glow, if they are huge or unusual shape? What can I say, even for adults this can briefly return them to a carefree childhood. Many parents are happy to experiment and make gel balls with their own hands together with their children.
Which ones are better?
Round and oval, in the shape of hearts and various animals, foil or latex - all these are types of inflatable toys. What to choose so that the festive mood from such a cheerful design remains for the entire duration of the celebration, what to pay attention to? Is it possible and how to make a gel ball at home?
Of course, the quality of latex products, which are called “balloons,” matters. Gel, hydrogen or other volatile fillers stay longer inside the colored elastic casing if it is made by reputable manufacturers. These include Italian, Belgian, American and other proven companies from manufacturing countries.
It is important to consider that:
- latex balloons with helium last for 8 to 10 hours;
- foil products can fly for several weeks.
The peculiarities of the molecular structure of helium are such that its particles quite easily penetrate the elastic shell of the ball. In order to extend the “life” of inflatable latex toys, they are treated from the inside with a specially produced substance - liquid plastic compound. Drying after a few hours, the substance forms a thin film inside the inflatable toy. Measures taken in this way increase the flight time of the balls several times. The composition is non-toxic, harmless to health and can be washed off with water.
For those who like to do everything themselves
How to make a gel ball at home? For fun you can use several pretty simple ways and get a similar result: take ordinary balls and fill them with volatile gas. To do this, you can use hydrogen or take a special container for gel balls.
If you need to prepare and blow a small number of colored bubbles, you can use the following “innovative” ideas:
- use reaction copper sulfate with table salt;
- obtain gas from the combination of soda and acetic acid.
When you plan to make jewelry from a large number of elements, it is better to use a container for gel balls.
Domestic fireflies
Completely unusual glowing balls can be obtained by inserting mini-LEDs inside each ball before filling them with helium or gas. Powered by small batteries, they can be pleasing to the eye as long as they fly near the ceiling. Most often, luminous elements from keychains, small flashlights, pens or other similar toys are used for this. After the balloons are deflated, the flashlights are removed and the batteries are disconnected. These elements can be used repeatedly in preparation for another holiday or party. The result is a completely unusual effect of fireflies flying under the ceiling.
Method one: acid and soda
How to make a gel ball at home? You need to proceed as follows:
- mix a glass of water with 1 tablespoon of baking soda and pour everything into a bottle;
- another 3 tablespoons of soda are placed inside the ball;
- in a shallow cup, combine the juice of half a lemon with three tablespoons of vinegar;
- carefully, using caution, pour the vinegar mixture into a bottle of water through a funnel;
- Quickly pull the prepared ball onto the bottleneck and secure with electrical tape or a strong rubber band.
The gas released during the violent interaction of these substances will quickly inflate the balloon. You should remove the bubble from the bottle and tie it tightly with thread. In order not to release gas from the bottle in vain, you should prepare all the balls in advance. In each of them (except the first) you need to pour 2 tablespoons of soda and place it next to it.
Method two: salt and copper sulfate
How to make a gel ball at home? For this option you need a good preliminary preparation. You will definitely need the following substances and items:
- a little copper sulfate;
- regular table salt;
- water;
- liter plastic bottle;
- a piece of thick aluminum wire;
- hose;
- disposable syringe.
IN plastic cover For the bottle you need to make two holes. One end of the prepared hose is inserted into one, and a syringe with an aluminum rod attached to it is inserted into the other (small). Use a wire to stir the mixture inside the bottle. Balls will be attached and secured to the second end of the hose. IN plastic container Place a little copper sulfate, salt and water. After all substances are completely dissolved, the bottle is tightly screwed on with a lid. The aluminum rod should sink into the blue water.
The reaction that begins occurs with a strong increase in temperature and usually causes the container to become very hot, so it is better to place the eggplant in a basin or bowl of water. The released gas will very quickly inflate colorful balloons, lifting the spirits of the participants in the action.
Although, of course, it will remain relevant throughout the year. After all, we have enough holidays, and glowing balloons are certainly suitable for decorating any celebration. The same birthday can be perfectly decorated with them. What's so good about these glowing balls? Because they are very easy to make. This will require a minimum of effort and time. From the title it is clear that such balls will glow using LEDs. If you have never encountered them, as they say, “in kind”, but only in finished products, then you should not be afraid. Everything is done in an elementary way. It couldn't even be simpler.
Making glowing balloons with LEDs
So, this whole structure, that is, an illuminated balloon, consists of several elements. Of course, this is the ball itself first and foremost. Next, an LED (usually 3-volt) and a battery, which will power this LED. LEDs can be of different voltages. It is best to buy 3-volt LEDs, and pick up the same battery for them, that is, 3-volt. A CR 2032 battery is well suited for this. This is a flat battery, in the form of a small tablet. This one is on the motherboard. In addition to these three components, we also need adhesive tape. With its help we will attach the LED to the battery.
As for LEDs, there are many different colors on sale today. It is best to take white LEDs. They can be placed in balloons of any color. If you take an LED of a different color (for example, green) and stuff it into a colored ball (for example, red), then the color of the ball when the LED is turned on will be an unspecified color. But here you can experiment and take any combination of colors of LEDs and balloons.
How to do it?
Now the “most complicated” process of assembling such balloons with LEDs. To assemble the luminous element itself, the LED legs are simply placed on opposite sides of the battery. Usually, the LED lights up immediately. Don't be afraid, you won't get shocked during this operation! But it may not catch fire. If it doesn’t light up, then simply turn the battery over, that is, change the polarity. The LED should now be lit. To ensure that the LED legs do not move away from the battery, glue them to the battery. That's all, our luminous element is ready.
Next, we push this assembled luminous element inside the balloon and inflate it. What to cheat with is up to you. If, in the old fashioned way, that is, with the help of your lungs, then such luminous balls, of course, will not fly. But if you inflate them with some kind of volatile gas (helium, for example), the balls will easily take off. Even an LED with a battery inside cannot hold them, because this entire luminous element assembled is not that heavy. You can make as many of these glowing balloons as you need. It all depends on how many LEDs, batteries and the balls themselves you currently have.
Of course, such a ball cannot glow forever. Here, it all depends on the type of LEDs themselves and the battery. But, usually, such LED balls glow from 24 to 48 hours. The more time passes, the less bright the glow becomes. After all, the battery is gradually draining. I think this time of glow of the balls is quite enough for any holiday. When the balls go out, you should not throw them away with all their contents. The batteries will, of course, completely run out and you won’t be able to use them anymore. But the LEDs themselves, when replacing the battery, will still glow. Therefore, we take them out of the balls, put them away for storage, and wait for the next holiday to come. There they will be useful to us again.
If I didn’t explain something clearly, then after watching this video, I’m sure you’ll understand everything. The whole procedure of making such an LED glowing balloon is shown here very well. Let's see.
