Washing and removing dust from curtains twice a year in spring and autumn pleases few people, and many have already abandoned them, preferring blinds: it is convenient to open or close the window at any time of the year from the annoying rays of the sun or the curious glances of random passers-by. Are there any differences between them, and what types of blinds exist?
Types of blinds
The huge variety of species and types is amazing, but despite this they are divided:
- For vertical: made from a wide variety of materials with lamellas different widths, which are attached to the top and bottom of the structure using a strong thread. Easy to use, allows you to customize the light flow different intensity, move completely or leave half open. Cornices can also be of different types, but the most durable ones are made of aluminum. Installation is possible both in city apartments and in office premises;
- Vertical fastening solution– it was from this type that the tradition of installing instead of dusty curtains blinds or something additional device for adjusting the light flux in home or production premises. Convenient for those who use the window sill as a mini-greenhouse: moisture does not get on the fastening elements and the slats themselves;
- Pleated- a new word in interior design: on the window you can see an accordion made of the main material, very original and unusual looking, impregnated with anti-dust agents that do not allow it to settle. It can even be washed, the accordion will not change its configuration, and many have already liked this type of window accessory;
- Roll view– with multifunctional functions and anti-dust properties, suitable for any type of interior. They are especially good for eastern solutions: the bamboo design is original and looks unusual on the windows. Installation is convenient, they can even be installed on the ceiling;
- Interframe view– they are usually made horizontally, but they are intended for windows with wooden frames: there is more space between them, and in order not to clutter the window, they are installed in a new way. The controls are located outside, which is very convenient for users;
- For owners with arched windows similar blinds are produced in various colors and all kinds of materials;
- Automatic designs– with the installation of an electric motor. Justified in those rooms where manual adjustment causes difficulties due to the height of the opening, and the control panel itself can be set to the desired position of the structure slats;
- The so-called "Roman blinds". They have recently become widespread because they are made exclusively from durable material, which can not fade from sunlight for a long time;
- Photo solution– they are usually made to order according to the customer’s layout: favorite photo will be the basis for applying the selected pattern;
- For placement in attics, that is, corner structures.
Depending on the material they are made of, they can be very diverse, and the listing can take several pages of text.
How to choose blinds
Vertical structures are considered the most convenient and reliable: the slats simply turn in one direction or the other, or slide onto one side of the window, letting in light or shading the room. The choice of designs is simply huge: various material and a lot of colors.
In vertical blinds, the slats do not rotate, but simply rise to the top of the window frame, sometimes this helps protect against moisture from watering house flowers.
The roll-up type is rarely used at home because they do not have a lifting mechanism and can only cover an entire window or a specific opening. They are good for bedrooms, that is, where it is necessary to completely get rid of light.
Fastening methods
Installation can be carried out inside, on top of the window frame, to load-bearing wall or along the upper slope, as well as the ceiling. The choice should match the type of blinds themselves.
All types must have a cornice - a base to which they can be fastened; this is the main fastening element. And it is the installation of this load-bearing part - important point installation
First you need to determine the location of the brackets on which the cornice will be installed.
Horizontal structures are usually mounted in window frame if they have a small specific gravity and short length, designed for only one window.
If they are heavy and will be installed on the entire opening at once, then fastening is carried out along the window slope, wall or ceiling.
If a double-glazed window is installed, then it is necessary to carry out the work with great care: first mark the location, check the dimensions, and only then can you start drilling holes for the brackets. If you make a mistake and drill in the wrong place, it will be very difficult to seal the holes, and excess cold air will flow through them. Even sealing construction foam will not help: traces will still remain.
If installation is planned on the upper wall, then you must first find out the material from which it is made. It must be load-bearing, and not made of wood-shaving material; in the latter case, the cornice may fall from its weight.
The final appearance of the structure will also be important: it should be in harmony with the rest of the decor and not stand out against the general background.
It is better to mark by level: the slightest discrepancies in height or width can lead to failure of the control mechanism.
The main methods include:
- Directly into the opening of the window frame;
- On the frame;
- On a load-bearing wall;
- To the ceiling.
Required Tools
To carry out necessary work A thrifty owner always has the necessary tools, and there is no need to purchase anything special:
- Soft meter for measuring distances and heights;
- Electric drill and thin drill bit about 2 mm;
- Screwdriver with straight or Phillips head;
- Pencil with graphite center:
- Level;
- In other cases it may be necessary polyurethane foam for leveling a wall or ceiling.
How to install blinds - step-by-step instructions
Let's look at a few specific installation methods:
Installation on a window frame or specific sash
Please note that the package already includes everything you need for work. You need to unpack everything and prepare a convenient place to place them:
- Take off packaging material from the cornice;
- It is possible to strengthen the cornice in different ways: using screws, on pre-installed special brackets of their kit, or do it the old-fashioned way by drilling required diameter holes:
- If you choose fastening with screws directly into the window frame or sash, then this method will be the most reliable and durable, and there will be no leakage. Such fasteners are not suitable for vertical blinds: the holes made will be noticeable and the appearance will be unattractive.
- Fastening on brackets is suitable for any type and type of structure, and there is no need to drill holes.
Horizontal
Usually the fasteners are carried out along the top of the window opening, and only a little of the edges of the lamellas extend beyond the sash. This is due to convenience manual control. Take a set of screws included in the delivery set and secure the structure at the marked points:
- For leveling, you can use plastic spacers that are installed on the profile, and the cornice is already attached to them;
- You can adjust the tension of the fishing line: twist it in one direction or another so that the slats move freely, but at the same time do not sag.
Vertical:
- Determine the exact location. If the fasteners are supposed to be on a wall or ceiling, then the lamellas themselves should extend beyond the parameters of the opening by about 10 cm;
- The delivery set includes special latches, we fix them on the cornice;
- We install all the slats to the holder bar and runners;
- We attach the control element (usually in the form of a chain) to the plumb lines;
- Distribute evenly over the opening and check functionality.
Rolled
- Align it to the size of the window, trim off the excess, remove the canvas from the roller. We mark the sizes;
- We adjust the lower part to the size of the window opening. Now you should install a part with a plug and a small protrusion on the shaft;
- Mix the width of the curtains, cut off the excess;
- We fasten the canvas on the top roller so that about 5 cm remains - we wrap it in the top roller;
- You can begin installing the structure using the above methods.
Installation cost
If you do the installation yourself, you will only need to pay for a set of curtains, and craftsmen can charge from 1 to 3 thousand rubles for the work.
To save money, you can try installing blinds yourself. The work is not difficult, you just need to correctly mark the slope or frame, depending on where you need to secure the structure. You can use different ways to install such curtains; the choice is made based on the design features and dimensions.
Overview of types of curtains and blinds
For different objects, window design of a certain style and functionality is selected. The lamellas in the structure can be positioned in different ways: vertically, horizontally.
Horizontal blinds
You can find different types of shutters: pleated, interframe, attic, bamboo roller shutters; roller shutters belong to the same group. Main distinguishing feature– horizontal lamellas. They can have different thicknesses, widths and function differently. Such structures can be attached to a slope, a frame, they are also installed on top of a window block or inside the frame. It all depends on the size of the windows and the preferences of the homeowner.
Design of horizontal models
Classic horizontal blinds can be safely installed in premises with a variety of purposes: offices, private housing, production sites, administrative, retail and educational facilities. These are universal designs that are found in various shades.
Vertical blinds
Such curtains are usually attached over windows, which is due to the design features: vertically oriented slats, most often made of woven material. There are two main types of such structures: floor-length or window-sill length.
General view and arrangement of vertical models This is one of the reasons why such curtains are usually installed in private homes, apartments and offices. This type of blinds is installed using self-tapping screws. There are alternative option installations - to the ceiling surface.
Roller blinds
Window blinds in this design combine two types of curtains: classic fabric and horizontal plastic. They are equipped with a continuous sheet of different types of material, cover the double-glazed window, and, if necessary, rise by rolling into a roll.
Device roller blinds Fastening of blinds of this type is carried out using self-tapping screws and brackets. You can hang them in various interiors.
Mounting options
Horizontal and vertical curtains are characterized by individual design features. Based on this, developed different methods fastenings:
Mount 1: For vertical structures
Mounting for vertical horizontal models to the wall Vertical curtains can be mounted under the ceiling or over windows. Such blinds plastic windows Can't install without drilling.
Mount 2: On a horizontal view
As standard, structures with horizontally oriented slats are attached directly to the window sashes, to the upper slope. Horizontal blinds without drilling can be placed in any design only on the sashes of the window block.
Ms. can be mounted in a window opening, on the ceiling, wall, or on plastic window sashes But the inter-frame analogue is created exclusively for installation in the space between window frames. There are also restrictions on installation to the upper slope; in particular, inter-frame and attic blinds are not attached this way. If you do the installation yourself, you must take into account design features products when choosing the installation method.
Preparation, taking measurements
The following tools will be useful: a screwdriver/screwdriver, a tape measure, a carpenter's pencil. In order for your curtains to function as efficiently as possible, you need to take the correct measurements. The structure should be located symmetrically relative to the glass unit.
If blinds are attached using adhesive tape without drilling, it is possible to correct errors. For analogues installed on brackets and screws, you need to mark as accurately as possible.
To fasten vertical curtains, it is enough to measure the dimensions of the window opening, the distance between the fastening points and the length to the bottom edge of the curtain. This will allow the structure to be correctly positioned relative to the level of the floor and window opening.
Horizontal blinds are often installed on the shutters, so the main measurements concern the double-glazed window: height, width of each glass. To these values add 2 cm along the top and bottom edges, 0.5 cm on the sides.
Installation of vertical blinds
Anyone can install such curtains with their own hands. If the blinds are short, they can be placed inside the window openings. Otherwise, installation is carried out on the wall or under the ceiling.
For error-free fastening, sequential instructions are given:
Step 1: Marking
The central point of the window opening is determined and correlated with the center of the blind cornice. You need to make marks along the edges of the structure with your own hands. Points for installing self-tapping screws are marked on both sides of the cornice closer to the center of the window block by about 5-6 mm.
Place the cornice against the wall so that the center of the cornice coincides with the center of the window, and make marks along the edges. Step 2: We look at the level
At the same time, you need to evaluate whether the slats are positioned correctly. Their lower part should be 1-2 cm above the floor level. The same amount must be retreated during installation short curtains(up to the windowsill).
Step 3: Attaching the brackets
Dowels are installed in holes prepared in advance with your own hands. The brackets are secured, this is done using self-tapping screws. Next, special clips are installed on these elements.
Be careful when using the hammer drill when drilling for bracket fastenings, otherwise part of the wall may break off. Step 4: Installation of slats and chain
A cornice is attached, into which all that remains is to insert the runners and hang the vertical slats directly on them. Finishing touch– fastening the chain.
The slats must be hung in the exact order in which they are folded in the package. Otherwise, the design of the blinds may be damaged. Installation of horizontal
Guided by the markings made earlier, you can do the fastening yourself horizontal design. Instructions have been created for this:
- First you need to secure the upper fasteners. To do this, use a screwdriver to prepare holes that will allow you to install the brackets using self-tapping screws.
- Next, you need to hang the cornice; it is fastened until it clicks.
- Holes for the lower fasteners (corners) are drilled taking into account the dimensions of the thread retainer connecting the lamellas. Typically, the design of blinds requires holes to be made on the sides of the glass. Then the latch, which is connected to the lamella sheet, can be easily inserted into the corners.
Do-it-yourself installation must be done with the utmost care, otherwise the blinds will not function correctly.
Methods for attaching roller blinds
When deciding how to install blinds on a window, the first priority is to determine the appropriate mounting method. Roll design It can be mounted either with self-tapping screws or with the help of an adhesive (adhesive tape, liquid nails).
2 ways to attach roller curtains to pvc window, on L-shaped brackets and tape In the first case, the technology for installing vertical curtains is taken as a basis, since roller blinds suggest the need for fastening only in the upper part of the structure. To “plant” the structure on the adhesive, the surface of the windows is cleaned and degreased. This will improve the adhesion of materials.
This option is suitable for double frames. Installation of interframe plastic curtains – complex process and assumes the need to violate the integrity of the frame profile: holes are drilled (2 pcs.) to output the blinds control system (handle and cord).
They should be located at the top of the inner sash. The brackets are installed on the upper profile, using the technology for installing horizontal blinds as a basis.
Basic tips for choosing:
- Before purchasing a design, you need to clarify the composition of the kit, in particular, the presence of fasteners;
- If the installation is easy to do yourself, then it is better to entrust the repair of curtains to a specialist;
- Plastic is easier to care for;
- It is not recommended to clean the new structure too often, as this will quickly wear off the protective coating.
Detailed instructions:Step-by-step installation with your own hands (photo)
For example, horizontal blinds can be positioned inside any in a convenient way. However, the most popular option is on top of the sash. The inter-frame structure is more difficult to install, and the vertical analogue can only be located above the window or under the ceiling due to its large dimensions.
After you most likely, you will immediately have a question about the need to install blinds. In most cases, blinds are not just an element of window decor - they are a means of protection from the sun, and it is about blinds that we want to tell you today, telling you about their advantages, types and how to install them yourself.
Contents of the article:
Do I need to install blinds on windows?
Some people think that blinds are just a necessity, while others think, on the contrary, that they are not needed, so who is right in this situation!? In fact, there are no right or wrong in this situation, since the need to install blinds is an exclusively subjective opinion. This opinion is based on two factors: personal taste and necessity. Thus, we can make a small conclusion that blinds are installed in two cases: if you like them and/or if there is a need for them. Let's look at these two factors in more detail.Many people like blinds because of their beauty, because there are several types of them, which we will talk about a little later. With the help of blinds, you can visually decorate a window, especially using blinds of a certain color or with different patterns, which will fit wonderfully into the interior of the room, and also “thematically” transform the window. Many people prefer blinds because they can be used to replace curtains and curtains, which many are already tired of.
As for the need for blinds, they help protect from the sun's rays. If your windows face the east, south or west, then in the summer direct sunlight will cause you great discomfort.
Firstly, due to direct sunlight, the air temperature in the room increases significantly. By installing blinds, the temperature in the room will be several degrees lower, as they will prevent direct sunlight from entering. In addition, blinds are necessary if you have an air conditioner installed, otherwise it will take longer to cool the air in the room, and the achieved temperature will be quickly lost. Therefore, in order not to force the air conditioner to work unnecessarily, it is necessary to install blinds.
Secondly, due to direct sunlight, the room becomes very bright and this causes discomfort, especially negatively for those whose windows face the east side, when the sun begins to shine in the eyes early in the morning. Blinds are also necessary if the window outside your window is not very beautiful landscape- blinds will hide it all beautifully. Well, another small positive point about blinds is that they cover the room from the sun's rays, so furniture, paint, wallpaper and window profile With inside less susceptible to fading.
Types of blinds
Today there are 3 types of window blinds:- Horizontal;
- Vertical;
- Fabric.
- Aluminum;
- Plastic;
- Tree;
- Textile;
- Bamboo;
- Etc.
Installing blinds yourself
An integral part of installing blinds is measuring them. If the measurements are taken incorrectly, it may not only not look aesthetically pleasing, but also have a negative impact on the window profile.
Measuring horizontal and fabric blinds
There are 2 options for fastening blinds: on glazing beads and on a profile. Of course, if you want to attach the blinds to glazing beads, then you must be very careful in choosing the length of the screw, since a long screw can damage the glass of the double-glazed window, which will ultimately lead to depressurization of the entire double-glazed window and negatively affect its thermal insulation properties. Installing blinds on the profile of a plastic window is simpler, there is no danger, but it is one thing when the hole is made in a glazing bead, which can be easily replaced, and another thing when the hole is in the profile. Personally, we recommend giving preference to attaching blinds to glazing beads, and, if possible, to fastenings with double-sided tape; this method will not require making extra holes in the window.
The width of horizontal blinds is measured from the left edge of the left bead to the right edge of the right bead. In the same way, the height of the blinds is measured: from the top of the upper bead to the bottom of the lower bead. One important thing to consider is how you will attach the blinds. If you want to strengthen the blinds with glazing beads, and at the same time install the lower clamps also on the glazing beads, then the length of the blinds must strictly correspond to the distance from the base of the glazing beads.
We decided to show the measurement of the blinds in the picture below. Blue glazing beads are shown - plastic strips that secure the glass unit to the profile. The red lines show the boundaries along which it is necessary to measure the window, taking into account our recommendations.
Measuring vertical blinds
In turn, measuring vertical blinds is a simpler process, since there are no special nuances. The peculiarity of the measurement is how you want to secure the blinds. There are three types of mounting vertical blinds:
- To the top window slope;
- Higher window opening(like a regular cornice);
- To the ceiling.
If you want to limit the entry of direct sunlight into the apartment, and at the same time give preference to vertical blinds, then it is best to mount them on the upper part of the window slope - this type of fastening has more beautiful view. If you want to completely hide the window behind the blinds, or you have plastic slopes, then vertical blinds can be mounted above the window opening. If you want to install blinds instead of curtains and stretch them along a large window opening or across the entire wall, then you need to attach the blinds to the ceiling.
If the blinds will be installed in window opening, then their width should be equal to the width of the window opening, and their length should be strictly from the upper slope to the window sill, even a little shorter, so that they do not cling to the window sill. If you want the blinds to protrude beyond the perimeter of the window opening, then the width of the blinds must be made with an allowance of 15-20 cm, and the height can be made either with an allowance of 20-30 cm greater than the height of the window opening, or even make the blinds to the floor. If you want floor-length blinds, we recommend that you give preference to full-wall blinds - such blinds and the type of their fastening will look very beautiful.
When your measurements are ready, you can go to a company that produces blinds, or order them through an online store, which will be cheaper and easier. The only thing you will need to choose is the color of the blinds and check whether fastening materials are included with the blinds.
Installation of blinds
How to install blinds on plastic windows? Now let's get to the fun part - editing. Horizontal and vertical blinds have different mounting methods, so we will talk about them separately.Installation of horizontal blinds
To install horizontal blinds you will need a screwdriver or screwdriver and a pencil. The installation procedure is very simple. We put brackets on the top of the blinds and measure which part to screw in the screw and mark it with a pencil. It is very good if the brackets are attached to one self-tapping screw in order to make fewer holes in the window. So, when the mounting location is outlined, we check that everything is correct and remove the brackets. First, take one bracket, place it in the intended area and screw in the self-tapping screw. After that, we do the same with the second bracket. Then we put the blinds on the brackets and in the same way fasten the clamps on the sides from the bottom of the blinds. We check that everything works and proceed to install the blinds on the remaining parts of the window.
As for horizontal fabric blinds, the principle of their installation is somewhat different from the above. As a rule, this type The blinds are attached to brackets, which are fixed to the window with an adhesive base, that is, simply put, they are glued to the profile. Just like horizontal fabric blinds, they are also fixed at the bottom.
You will learn more about the installation of horizontal and fabric blinds from the videos below.
Installation of vertical blinds
Installation of vertical blinds has 2 types of installation. The first type of installation is when the cornice of vertical blinds is attached to the ceiling or to the upper slope. The second type of installation is when the curtain rod is attached to brackets that are fixed to the wall.
In the first type of installation, there are special mounting holes in the middle of the cornice through which screws are screwed in to secure the structure to the ceiling or to the slope. To fix the cornice, you need to attach the cornice itself, then you need to mark in which places to make holes for fastening. Using a hammer drill, make holes and drive dowels into them. Please note that if you use a hammer drill to make holes in the slope, be careful not to break off part of the wall. After you have driven the dowels into the holes, attach the cornice and secure it with screws.
With the second type of installation, you first need to fix the brackets on the wall, after which the cornice is put on them. Before marking the areas where the brackets will be fixed, it is necessary to attach the cornice and take measurements. After this, we make holes in the designated areas, drive dowels into them and then fix the brackets with a screw. At the end of the installation work, we fix the cornices on the brackets.
The next stage of installation of blinds is their assembly. Unlike horizontal and fabric blinds, vertical ones require assembly, but it is not difficult. To do this, you need to collect all the runners together and turn their notches towards you. Then we take the lamellas and insert them into the runners; when the lamellas are tightly secured, a click will sound. Then weights are inserted into the lower part of the lamellas and secured with a chain. After this, check the functionality of the mechanism and begin attaching the decorative panels to the cornice.
Video guide for installing blinds
This video clearly demonstrates the process of installing horizontal blinds. In the installation method used, the brackets are attached directly to the profile with self-tapping screws, and not to glazing beads.
In this video you can familiarize yourself with the installation of fabric blinds, the brackets of which are also attached to the profile with self-tapping screws, and are not glued to it.
The last video will tell you how to install vertical blinds and assemble them.
You can attach blinds to a plastic window using two various options. Let's look at the advantages and disadvantages different ways fastenings and find out how to hang blinds with your own hands.
For some interior planning cases, blinds may be preferable to curtains. Their main advantage is the ability to regulate the light output. All you need to do for this is to rotate the slats to a larger or smaller angle relative to the surface of the window. There are two main methods used to attach blinds. Let's analyze their advantages and find out. How to attach them with your own hands.
How to take measurements correctly
First of all, the blinds must be correct size. To do this, you need to decide on the method of fastening. Methods can be divided into two groups:
If you plan to install blinds on several windows, you should measure each opening separately. Although it seems that the window openings are exactly the same, this is not always true. A discrepancy of 2-3 cm can lead to consequences that are difficult to eliminate.
If you plan to mount a vertical structure, it is necessary to measure the height and width of the window opening. You should be careful when measuring, since you can shorten too long lamellas, but add additional elements narrow blinds will be problematic.
If the model has horizontal lamellas, the measurements will be somewhat more complex. If the blinds are attached to the opening, you need to determine what the width and height are. The length of the canvas is selected at your own discretion. You can find both models that reach the window sill, as well as long options that reach the floor. If necessary, blinds with plastic or aluminum slats are not difficult to make shorter.
When installing directly on the frame, you will need to consider whether the window will open.
If the window is solid and does not open, you can measure the entire width of the opening. If the shutters will open, it is worth ordering a separate structure for each half of the window. Measurements should also be taken accordingly. Measure the parameters of the glass (width x height) and add 20 mm on top and 5 mm on the edges.
When designing blinds attached directly to the frame, make sure that they will not interfere with the operation of the fittings and will not become an insurmountable obstacle to its maintenance (lubrication, adjustment, etc.)
Preparatory work
So, the mounting method has been determined, the blinds have been selected, ordered, manufactured and delivered to the apartment. What to do next? Before you start attaching the blinds to the window, it is worth doing some preparatory work.
First of all, you need to unpack the finished product, carefully untangle all the cords, without leaving the slightest knot, and examine the finished product. According to the attached instructions, you must carefully check the completeness, make sure that all structural elements are in place and look exactly as in the instructions.
If at the packaging stage something is mixed up or not included in the box, the blinds will not be installed. It is better to immediately file a complaint with the manufacturer than to look for a replacement or improvise, trying to do without the missing part.
You also need to prepare the window itself. You need to remove all unnecessary items from it. It is worth protecting the window sill and the nearest meters of floor with newspapers from dust and the inevitable debris when drilling. It's also worth making sure you have reliable support for legs (stepladder or sawhorse), so that the drill cord allows you to reach all drilling points.
Preparatory work when attaching blinds is not complicated and does not take much time. But if all these operations are not done on time, the installation process can take a significant amount of time and require a lot of labor.
No drilling
Modern plastic double glazed windows allow you to install blinds without using an electric drill. There may be several reasons for choosing this mounting method. For example, under the terms of the lease agreement, it is prohibited to carry out such manipulations in rented housing. Other reasons may be the lack of necessary power tools, reluctance to bother with drilling or spoil the surroundings.
First of all, it is worth considering that fasteners without the use of drills and screws are usually less reliable. This means that only lightweight structures can be secured in place in this way.
Usually the lamellas in them are arranged horizontally and are made of thin and light polymer. For heavier models, it is still worth choosing a fastening method using self-tapping screws. You can usually find out whether the selected model can be hung without drilling from the included instructions.
To work, you will need double-sided adhesive tape and scissors. The operating procedure is as follows:
The last stage of installation is attaching the adjustment strips to the block and installing the slats in place. The reliability of the fastening allows the blinds (provided that the model is not too heavy) to hang in place for several years without distortion or separation from the attachment point. However, when cleaning (removing dust from records), you must act carefully so as not to tear off the structure.
If you eventually need to remove tape-mounted blinds, this is quite easy to do. A special liquid (for example, Anti-Scotch composition) will help remove traces of glue.
But if you don’t have a professional solvent at hand, you can use a rag soaked in WD-40 or vegetable oil.
Required materials and tools
Now let's look at fastening with self-tapping screws. It's much more universal option, which allows you to hang almost any model using any mounting method (on the ceiling, in an opening or on the walls).
First of all, you should pay attention to the quality of the fastening elements included with the blinds. Sometimes manufacturers (this statement especially applies to cheap Chinese-made models) include too short and thin self-tapping screws made of low-quality steel. If you plan to attach heavy structures to the ceiling, it may be worth purchasing something more reliable.
Also for work you will need:
- Measuring tools: pencil, ruler with bubble level, tape measure.
- Drill. The drill bit for the drill is usually #6.
- Dowel and hammer.
- Brackets for mounting (usually included with the product).
- Scissors.
- Screwdriver.
Having prepared a set of tools for work, you can begin.
How to hang blinds on plastic windows with your own hands. Step by step instructions
The installation process usually does not cause any difficulties even for those who do this work for the first time. We will look at the operations for installing vertical blinds. Here are the main operations that need to be performed:
- First of all, mark up. The brackets are usually mounted at a distance of 90 - 100 mm from the cornice. Mark the holes for the brackets with a pencil and drill them.
- Insert into the holes plastic dowels. Insert the self-tapping screws into the holes in the bracket and screw them into the dowels.
- Install the curtain rod with the fixed decorative panels on the brackets.
- The runners are assembled according to the instructions given. You need to attach the canvas to them and thread them into the cornice.
- Weights are inserted into the lower part of the canvases. A decorative chain is attached to them.
- Stoppers are inserted into the ends of the cornice and covered with decorative plugs.
The installation of horizontal blinds differs slightly. The main difference is greater sensitivity to strict adherence to horizontal installation.
After assembly, it is important to carefully check the operation of all elements of the system (make sure that you can open and close the blinds, and also change the angle of rotation).
Here are some tips from professional installers:
- Before purchasing, make sure that the kit includes the necessary brackets. For some companies, the price of the kit includes only the canvas, and fastening and adjusting structures must be purchased separately.
- If defects are found, you do not need to try to fix them yourself. Contact the manufacturer for replacement or repair.
The main thing in any work is accuracy and adherence to technology. If you do everything correctly, you can hang the blinds with your own hands, quickly and without much difficulty.
You can install vertical blinds yourself if you follow the step-by-step installation instructions. It is also important to know how to care for blinds and what types are intended for which windows.
Species
Vertical blinds are divided into the following types: classic, inclined, corrugated, arched, day-night and accordion. When installing vertical curtains, it is important to know which type is suitable for which window and interior:
- Classic. Made from fabric, paper or plastic. Designed to darken the room, protect against heating sun rays, zoning internal space premises.
- Oblique. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is a specific assembly system, which does not allow the canvas made of any material to sag when at an angle. Mostly inclined models are produced with electronic control.
- Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. A corrugated model made of plastic and paper in this design absorbs a significant part of the heat and protects the room from bright light.
- Arched. Maximum flexible fabric sheets that take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).
- "Day-Night". The fabric of such blinds consists of two layers of fabric: light, light-transmitting fabric for daytime use, and thick, dark fabric for protection from the bright sun during the day and prying eyes in the evening.
- Harmonic. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.
Peculiarities
This product has a number of distinctive features:
- They can be closed from top to bottom (classic canvases), from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted: by closing either the upper, lower, or central part of the window.
- Suitable for covering irregularly shaped windows.
- Optimal solution for attic, attic, ceiling and inclined windows.
- When opened, the canvas is compactly folded and hidden inside the cornice.
- Convenient for installation on all types of windows.
- Various ways fastenings and control mechanisms (manual and electric).
- The woven fabric is washable.
- The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
- Easy installation can be done by yourself.
Advantages
The following are distinguished:
- Compactness. Blinds occupy a minimum of space, allowing owners to show their imagination and organize additional window decoration or leave the window sill as a functional surface.
- Simple and clear type of control.
- Long service life. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
- Ease of hygiene procedures. Not required special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.
- A variety of designs for interiors in any style.
- The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
- Possibility to install the system yourself.
- A variety of materials: from light window decoration to total blackout protection.
- Possibility to combine blinds with curtains, tulle, lambrequin.
Required Tools
To install vertical curtains, you don't need many tools. You will need: a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.
The following will definitely come in handy: a bracket for the ceiling and for the groover, fasteners, corners, clamps, monofilament, stoppers and c-clips, rings for the rod, chain locks, replacement parts. Each instruction contains detailed list necessary components.
How to take a measurement
The final result depends on how correctly the measurements are taken. Even expensive, beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats are constantly rubbing against the wall.
It is important to pay attention to the following points:
- For the most accurate indicators, a steel tape measure is used.
- The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter.
- When ordering blinds, the width parameter is indicated first, length – second.
- Not a single window opening is absolutely perfect. geometric shapes, therefore measurements in height and width must be made at least at two points.
When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, you should compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value. For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.
Mounting options for plastic windows
There are several mounting options: with and without screws.
With self-tapping screws:
- It is necessary to mark the places where they will be located.
- Then make holes and attach the brackets.
- Secure the blinds.
- Also make two holes on the bottom.
- Secure the ends of the blinds with plugs.
Without self-tapping screws. First of all, you need to mount the curtain, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening. The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for the screws. After installing the guide string, the curtain itself is mounted into the mechanisms.
How to care
Due to the peculiarities of their composition, the materials from which blinds are made do not require special care. Once a month, such curtains can be dry cleaned, and once every few months - wet cleaned. A good addition would be treatment with sprays against fading, exposure to moisture and dust.
If necessary, you can wash such blinds using a gentle wash cycle or by hand.
How to properly attach to the ceiling
Vertical curtains are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.
In all cases, the fastener is a cornice with or without a decorative facade. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued to double sided tape. Special tape seems rather impractical, however, it is fixed very firmly, so it is important to correctly mark for installing the brackets. Once they are glued, moving them will be quite difficult.
The procedure for installing vertical blinds:
- Preparing tools.
- Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
- Fastening the brackets in a suitable way (with or without drilling).
- Installation of cornice.
- Installation of slats. To do this, you need to pull the control cord, with the fastenings for the slats located on it, so that they are in the desired position.
- Then fix all the slats on the hooks of the fasteners.
Wall mounting
Installation work Wall decoration requires certain skills and experience; it is necessary to take into account some nuances and features. Installation of blinds begins long before preparation work surface and a set of tools:
- The first step of this process is an informed decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room.
- The second important point is the correct marking. Much, if not everything, depends on it, including how easy the installation process will be. If all the features of the architecture window openings will be taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.
- It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of deformation for them.
- Installation of blinds. Must be carried out exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening with drilling and fastening without it.
How to hang on the balcony
To install, you must follow these steps:
- Degrease the areas of the balcony and fasteners that will be connected with adhesive tape.
- Install blinds.
- Assemble the brackets.
- Mark the mounting brackets. To do this, you need to attach the brackets to assembled blinds, install on the window without fastening, mark with a pencil the places for the adhesive tape, remove the curtain.
- Install the string guide against sagging. Attach to the “ear” of the top bracket and weighting of the curtain, and fix at the bottom in the tensioner, which is installed on the frame.
