Garden lighting is done primarily for practical purposes, as it allows you to comfortably spend time outdoors in the dark, and also for aesthetic purposes - illuminating bushes and trees looks incredibly beautiful. In this article we will look at some features of organizing garden lighting.
General information
Lighting garden plot is a creative process akin to art. With skillful approach, you can create incredible effects created from a combination of plants and. This allows you to turn the most ordinary and unremarkable garden into a fabulous corner.
In addition, as mentioned above, lighting will allow you to move around the garden in the dark without fear, or even spend time here with your family or, for example, in the company of friends. True, for this you will also need an appropriately equipped gazebo.
Depending on the area where the lighting fixtures are placed and their functions, garden lighting is divided into several types:
- Lighting a house or gazebo;
- Track lighting;
- Illumination of stairs or bridges;
- Accent lighting;
- Festive lighting;
- Security lighting.
One of the most important conditions for lighting a garden plot is to preserve its aesthetics daytime. In other words, lamps should not disturb the harmony of the garden landscape. However, they can serve as its decoration and addition.
Therefore, the choice of lighting fixtures should be approached wisely.
Types of lighting fixtures for the garden
All external lighting fixtures, regardless of their type, must meet the following requirements:
- Moisture resistance;
- Frost resistance;
- Corrosion resistance.
It must be said that this requirement also applies to switches located on the street, as well as to sockets. The safety of using the system depends on their compliance.
Also, when choosing devices, you need to keep in mind that they come in several types:
Advice!
To illuminate small areas, it is best to use compact ones with soft, pleasant light.
Devices with a height of more than 60 cm will direct the light flux into the eyes, which will cause discomfort.
Features of garden lighting
When making decorative lighting for the garden, you should carefully consider the location of all lighting fixtures. Each lantern, as mentioned above, should not only perform its main function, but also serve as a decorative element during daylight hours.
It is better to give preference to not very bright and warm light, which can create the most comfortable conditions for vision. Sources can be placed between decorative elements and plants. Light directed upward should be used to illuminate trees and large bushes; light directed downwards is suitable for illuminating small plants.
Path lighting
To illuminate paths, it is best to use small mushroom-shaped lanterns. Otherwise, they will illuminate a large area around, but not the paths themselves.
Also, lighting paths in the garden can be organized using light sources built into the path itself, located on both sides. They will give only a hint of lighting, however, they will indicate the direction of movement. The advantage of this solution is that the lamps are not visible during the day.
Pond illumination
The lighting of the garden pond, if there is one, deserves special attention. The fact is that during the day any pond looks interesting on its own, but with the onset of darkness its beauty fades. Properly organized lighting will allow the pond to serve as a garden decoration even at night.
There are several options for pond lighting:
- The most common method is to use flashlights located along the edges of the reservoir, which ensures a clear delineation of its boundaries.
- Experts recommend focusing attention on the composition of plants near the shore by installing a lighting device directly in the thickness of the foliage. Moreover, the luminous flux should be directed at flowing fountains, sculptures or a waterfall.
- Interesting and unusual solution is “light from within.” In this case, the lighting is installed in a pond. For such purposes, you should use a special lamp with a sealed housing.
- Often, landscape designers use floating lamps when designing ponds. They can be performed in the most different styles, for example, imitate animals or plants, geometric shapes or transparent spheres.
It must be said that when lighting a pond, you can use all types of lighting simultaneously.
In the photo - staircase lighting
Staircase lighting
The lighting of stair steps must first of all be of high quality, since the safety of movement depends on it. Great option is the installation of lamps in steps or in a fence flight of stairs. This approach will give the garden a special romantic ambiance.
Pay attention!
When organizing staircase lighting, it is necessary to focus attention on all steps, i.e. Each step should be equally well lit.
Features of connecting lighting devices
Garden and park lighting comes in several types:
- High voltage – 220 Volt;
- Low voltage – 12-24 Volts;
- Solar powered.
Depending on the type of lighting, the wiring is laid differently.
High voltage lighting
High-voltage cables are laid at a depth of about 80-90 cm. The cable for garden lighting must be double insulated. Moreover, the cables are not laid in the ground, but in metal or polyethylene pipes. When laying electrical power to lighting fixtures, it is advisable not to damage tree roots.
Pay attention!
It is unacceptable to lay cables under the foundations of residential buildings.
Lamps operating from a high-voltage network have a strong, even light and are capable of illuminating a space of 5-6 meters.
True, the nature of the lighting largely depends on the type of lamps, which can be:
- Halogen,
- LED;
- Metal halide, etc.
The choice of lamp type depends only on your personal preferences and financial capabilities, since the price for them can vary greatly.
Low voltage lighting
Low voltage lighting is much more cost effective and also safer. Low-voltage cables can be located directly on the ground, the only thing is that they must be disguised, for example, with stones or mulch. In addition, to avoid damaging the wiring during gardening work, you should wrap it with casings.
The disadvantages of low-voltage lighting devices are that they do not provide very much light - they illuminate the space by 1-2 meters. But in order to connect such a lighting system, you do not need to have any skills or understand electrics, since the instructions for installing lighting devices are extremely simple.
Solar powered
Solar garden lighting is attractive because it does not require laying cables or digging trenches. However, in cloudy weather such devices are practically useless. Therefore, they should hardly be considered as a full replacement for other types of lighting.
However, solar-powered lamps are quite suitable for decoration. garden paths, illumination of artificial reservoirs, etc. Since the light from such devices is not very strong, it is better to install them in small groups.
Conclusion
Every summer resident or gardener can organize garden lighting with his own hands. The main thing is to correctly distribute the lighting fixtures and adhere to the above recommendations.
From the video in this article you can get some additional information on the topic of garden lighting.
With the onset of darkness, it becomes more difficult to move around the garden plot, and all its decorative elements, created with such care and love by the owner, lose their clear outlines. Moreover, at night the area becomes more vulnerable to intruders. Properly organized lighting of the area helps to solve all these problems at once.
No. 1. Basic requirements for site lighting
On the diagram it is necessary to note where the lamps will be located, how many there will be, and what function will be assigned to them; you can also indicate the size and style of execution. Now being compiled electrical diagram connections: For those who have at least a little knowledge of electricity, this is an easy task. It is better to entrust the installation of the entire lighting system, since, first of all, it should be as safe as possible for the owners of the site.
When drawing up a lighting plan, you must remember that The entrance to the house must be illuminated, gate or gate, the perimeter of the site, as well as the most dangerous places on the territory, incl. steps and bridges. It is not recommended to illuminate the house with, as this creates a blinding effect. When preparing a lighting scheme, it is important not to forget about climatic features region. For example, the height of the lamps should be such that they perform their functions under the maximum possible layer of snow.
No. 3. Types of site lighting
Lighting suburban area performs several functions at once, and for each of them it is better to provide a separate type of lamps.
Main types of garden lighting:
- general or functional lighting is necessary for safe movement around the territory after dark, for performing certain work and for proper rest in the evening. General lighting lamps are primarily installed at the entrance to the site, in parking lots, near the entrance to the building. They are also necessary for lighting garden paths and;
- marking of site elements- This special case general lighting. The main function of the marking light is to indicate certain objects, for example, the boundaries of a parking lot, the location of gates, steps, etc. In this case, you can use small lamps and even “luminous” stones;
- automatic lighting systems, increasing the security of the territory. Thanks to the presence of time relays or motion sensors, one or more lighting elements can be turned on when it gets dark or when intruders appear at the dacha. Such elements can also be used to scare away animals and birds by creating the effect of presence;
- decorative lighting. This includes lamps that are designed to decorate and draw attention to interesting elements landscape rather than providing full light. Alpine slides, ponds, tree crowns, recreation areas are equipped with such lighting, and flashlights are used for this. garden figures with built-in lights, lamps that can shine different colors, and other elements.
No. 4. Features of functional site lighting
The tasks of functional lighting are simple and clear. If decorative lighting cannot be used in every summer cottage, then It is impossible to do without general lighting. Illuminating everything important elements In order to increase the safety of movement around the territory, it is worth remembering that accents in lighting it is necessary to display it on a patio, house and other buildings - they should not be flooded with too bright light, otherwise those walking on them will experience great discomfort. The most illuminated place on the site is this and: it will be more comfortable to move from less illuminated areas to brighter ones. It is important that even late at night functional lighting allowed see the boundaries of the site.
It is also necessary to highlight stairs, bridges and other most dangerous objects. Lamps must be spaced evenly along paths. Lanterns, floor lamps with frosted glass diffusers, bright spotlights, spherical lamps and other elements can serve as light sources. 
No. 5. Decorative lighting
Decorative lighting is essential for recreation areas and objects that you want to admire even after dark. Usually additional lighting is provided , trees, shrubs, fountains, ponds, alpine slides, garden sculptures , as well as gazebos, patios, etc. Decorative lighting complements the main lighting and provides dim light, creating a romantic and slightly mysterious atmosphere. There are a lot of ways to organize it - it all depends on the style of the site and the imagination of the owner.
To Don’t make a mistake when choosing the style of lamps for the site, you can use simple rule. The more elaborate and multifaceted landscape design garden, the more simple and concise the lighting items should be. If the style of the site is close to minimalism, then you can use the most fancy and non-standard forms, placing the emphasis on them in decorating the garden.
No. 7. Types of street lamps by installation location
A huge variety of lamps designed for lighting suburban and summer cottage, can be divided into several groups:
- floor lamps, which include lanterns of different heights;
- wall lanterns used for home or home lighting, they can be hung on the wall at any height;
- pendant lamps include lanterns and garlands that can be hung from tree branches or ceilings in gazebos;
When purchasing, you should check whether it is painted inner part lamp mounting. If not, then you shouldn’t count on special durability. Lamps from stainless steel And aluminum alloys. Don't forget to find out about the warranty period and also ask the seller security certificate, where the degree of protection should be indicated.
If you choose the right lighting for your garden plot, it will help you not only to navigate well in the dark while walking through the gardens, but also to enjoy all their beauty and decoration.
But questions immediately arise: How to think through the installation of additional light in such a way as to leave the garden romantic and mysterious? What can be used for this?
What kind of lighting is needed? What are the lighting options? How can you use lighting to hide problem areas and highlight the brightest ones? This is what will be discussed in this article.
Features of security lighting
First, let's look at what types of garden lighting there are and how they work.
The first one I want to talk about is security lighting - it creates the effect of the presence of people at home.
Since it works automatically, it does not require constant supervision by the owners of the house. Quite a very interesting solution, since it only works when a person passes or drives nearby.
Functional garden lighting
The second type of garden lighting is functional. As a rule, this is lighting of individual garden paths and areas. The function is to illuminate these areas well for comfortable movement.
Basically, paths near stairs, bridges, if any, and steep paths where it would be unsafe to move in the dark should be illuminated.
Choose not bright lighting so that it does not dazzle, but harmoniously illuminates all the space you need, creating a romantic and calm atmosphere.
To do this, you can opt for lamps placed on poles that will illuminate garden paths and stairs.
But, in order not to add formality, do not choose too high lanterns. Since a lantern is not a simple or small lamp, this means that it will be used all year round. Therefore, they need to be selected from high-quality and frost-resistant material.
Functional lighting can do more than just illuminate problem areas, but also to place the accents of the garden - flower beds, flower beds, trees, fountains, and in general anything you want.
But when choosing lanterns, you should pay attention to their light spectra, since they come in cold and warm shades. If you look at it this way, it seems that it doesn’t matter at all.
But on the other hand, this will help you place accents correctly, for example: to put emphasis on green trees, then best choice There will be a warm spectrum of light, and colder rays will appear towards bluer tones.
Another great idea would be to decorate large flower pots with lighting. Just add a few glowing stones to the flowerpot and place them near stairs or benches.
A good way to decorate is by lighting trees and borders. If you have thick and tall trees, then why not use them as path lighting, thereby beautifying the trees themselves.
Lighting of architectural structures
The next type of garden lighting is architectural. If you have architectural structures in the garden, then you can illuminate them perfectly, thereby placing accents of light on the walls of the house or hellish paths.
Holiday lighting
Although the holiday lighting option is not used all year round, it will still give you joy and good mood.
Facades, garden compositions, trees, benches, stairs - all this can be decorated with New Year's garlands. But this composition is suitable only in winter.
Illumination from bottom to top
Top lighting can place accents on individual elements of the garden plot - relief objects, such as stone compositions, bamboo, pergolas entwined with plants.
To create a more fabulous setting, you should install the light source not very close to the object, so it will be fully illuminated.
Backlight from top to bottom
The lower illumination is the opposite of the upper one. If the upper one illuminated from bottom to top, then the lower one illuminated vice versa.
This kind of lighting is more suitable for lighting stairs, benches, flower beds, garden paths, or can simply be used to place accents on individual elements of a garden plot.
Photo of garden lighting
The romance of an evening garden... It comes together, like a mosaic, from many nuances, among which light plays a leading role. Unfortunately, illumination of a summer cottage is sometimes given an undeservedly secondary place, although a “ray of light in the dark kingdom” is simply necessary in order to move freely around your property in the evening. Not to mention the fact that the beauty of plants, hidden in the dark, can light up with new colors and take on unexpected fantastic forms. You just need to skillfully “play” with light, using several interesting ideas for illumination and design of garden lamps.
Truly, garden lighting is akin to art - it can create unprecedented effects that are born from the union of plants and decorative lighting. You just need to bring to life some “educational” ideas for your dacha - with your own hands you can transform your garden so much that from being inconspicuous, no different from many others, it will turn into a fabulous corner that can touch you at any time of the day.
Evening lighting of the dacha will not only give the garden a certain mystery, but will also allow you to move around the site without fear
Your garden house and the country landscape will look natural during the day and mysterious in the evening if you successfully combine the functionality of lighting with its decorative effect. What tasks are assigned to lighting a garden plot? Depending on the function and area of placement of external lamps, the following types of dacha lighting can be distinguished:
- home lighting;
- track lighting;
- lighting of stairs;
- accent lighting;
- patio lighting;
- festive lighting;
- security lighting.
Important condition proper organization dacha lighting systems are about preserving the aesthetics of the garden during the day, that is, lamps for night lighting should not disturb the harmony country landscape. To fulfill this condition, it is enough to select lighting fixtures of a natural shape and/or made of natural materials. A widely used technique for decorative garden lighting is one that absorbs solar energy throughout the day and releases it at night in the form of a mysterious glow, flowing softly, as if from within a rock.
Original lighting placed in dense vegetation will create cozy atmosphere in a secluded recreation area
Aerial butterflies and dragonflies, glowing in the dark, naturally and unobtrusively coexist with garden plants
Or maybe you would prefer a group of bright butterflies on long twigs stuck into the ground, which will enliven the lawn during the day and glow at night? How about a gnome with a lamp suddenly peeking out from behind a bush, or a glowing frog perched under large sheet? Such original solutions will give your dacha individuality and originality, to your delight and to the good envy of your neighbors.
In addition to the artistic impression, it is necessary to think through the technical side of lighting the dacha. The use of alternative light sources based on solar energy is the most economical option for garden lighting. In addition, this type of lighting will not spoil the appearance of the site with long electrical cords stretching along flower beds and paths, since it consists of an autonomous battery pack and a group of lamps connected to it.
The unusual illumination of trees in the form of luminous wells is so mysterious that you inexorably want to look into this depth
Artificial flowers in the form of solar-powered lamps will harmoniously fit into the landscape design of the garden
It is more logical to place backlights connected to the electrical network closer to the house - to illuminate the facade, entrance lobby, terrace, since these areas require more active light, and laying a short wiring will not require significant labor costs and financial investments.
Types of lighting for garden plots
Decorative focused lighting is the most expressive lighting created by an accent beam of light and directed at an original landscape composition - a flowerbed, pond, tree, or simply a beautifully shaped flower. With such directional lighting, it is important to correctly balance the intensity, color spectrum, pattern of the light spot and the location of the light source. Interesting idea to illuminate the garden, there can be groups of lighting fixtures located under trees with an unusual crown - in the evening, directed light will draw the silhouette of the tree and create a bizarre pattern of shadows on the ground.
Evening illumination of the garden depicts the outlines of plants so subtly that they sometimes take on a fantastic, unreal appearance.
Lighting garden paths does not imply an abundance of powerful lamps - these can be small spots or light sources built into the ground, giving only a hint of lighting on both sides of the country “fairway” and indicating the direction of movement. More careful “navigation” requires stairs, which can be illuminated by lamps mounted in the steps or in the railing of the flight of stairs. The main idea that can be applied is to illuminate the stairs with a large number of lamps in the form of improvised candlesticks made of glass jars or tins, grouped along the edges of the steps. Such a move will give the garden a romantic ambiance in the best possible way, and making such miniature light sources with your own hands is not difficult.
Illumination of the gazebo in the garden and the path leading to it will be the key to a pleasant evening time outdoors with your family.
Lighting your patio, deck or gazebo is the way to keep your yard's recreational areas accessible in the evening, on rainy or cloudy days. Since lighting based on accumulated solar heat is not too bright, it is better to use electric light sources to illuminate common areas. These can be floor and tabletop, built-in and spotlights or entire “garlands” of lamps suspended from the ceiling. Beautiful multi-colored bottles, complex lampshades made of plastic or wood, bright balls made of beads or an extravagant design made of shiny metal - the choice of design for central lighting in the recreation area depends only on you. Depending on what kind of atmosphere you want to give to the place of “social gathering”, the lighting can be intimate and cozy, or more festive and bright.
An unusual and slightly fantastic effect can be achieved by placing many ball lamps on long rods along the path
The main requirement for security lighting is its intensity and location in fundamentally important places for monitoring the security of the site - near the gate, at the entrance to the house, around the garage, along the perimeter of your property or in other places where valuable equipment or garden tools are located. As a rule, security lighting systems are formed using powerful LED lamps and are subject to certain rules - both in placement and in terms of design, so in this case it is better to choose industrial options for light sources.
A comparative review of garden lamps will also be useful:
An excellent solution for illuminating a summer cottage is pots for plants that accumulate light during the day and emit it at night.
Examples of hand-made lamps
A floor lamp that has fallen into disrepair, retired kitchen utensils that have served their purpose plastic dishes and other seemingly unnecessary things will now be useful to you for the “production” of country lamps. Everything will be used - from glass containers to grandmother's sets - a little imagination, a little patience and all the rarities that have one foot in the landfill will turn into lighting fixtures that bring you light and joy.
In order to make a country lamp, you don’t need to spend a lot of money - look into your grandmother’s chest and you will find everything you need for creativity there.
Option #1 - from glass bottles
Fancy lamps made from unnecessary glass containers can transform your garden, and won’t cost a single penny. An ordinary glass container can be turned into an amazing lamp without any effort. Take a bottle original form or an unusual color, pour multi-colored small beads, ground glass, transparent balls onto the bottom that will reflect light. Twist the colored wire around your finger to form spirals and place them in the container. Fix a small flashlight with silicone in the neck of the bottle - this will be a light source that can be conveniently turned on and off as needed.
When buying alcoholic beverages, take a closer look at the shape and color of glass bottles - because now they will be useful to you for creating homemade lamps
Interesting lampshades for pendant chandeliers can come from glass containers different forms and sizes. But how to cut off the bottom of a bottle? Yes, easily! Tie the bottle with a thin rope dipped in kerosene or gasoline at the level of the desired cut, and pour inside the bottle cold water clearly to the line marked by the rope. When you set fire to the rope, the bottle will burst and a smooth cut will form, which you only have to sand a little so as not to cut yourself. Now you can fill the lampshade electrical cord and connect the light bulb socket.
By cutting the bottom of a glass bottle and attaching a metal plate to a pin, you will get a convenient candle holder for garden lighting
You can get a more powerful light source if you tie several colorful bottles with wire and hang them from the ceiling of a gazebo, patio or summer house. If the bottle colors seem a little gloomy to you, take stained glass paints and paint the glass, showing your imagination and your innate sense of harmony. And don’t be afraid to give yourself free rein - you can always remove a not entirely successful fragment of stained glass painting with a solvent and update it. It’s even better if you entrust the mission of coloring bottles to your children or grandchildren - it will be a joy for both you and the children.
A little creativity - and from glass bottle it will turn out expressive wall lamp in the form of a stylized torch. To do this, a hole is drilled in a tightly screwed bottle cap, through which kerosene is poured inside and a wick made of natural rope or a stainless steel tube pre-impregnated with the same flammable mixture is filled.
Pouring into a bottle flammable mixture and by tucking the wick inside, you will create a lamp in the form of an improvised torch
The alternation of bottle-shades with candles and flowers gives the homemade chandelier on a metal frame an unusually natural look
Why New Year's garland collecting dust in anticipation of the next New Year? Place it in a champagne bottle and you will have an expressive lamp for your garden. Too lazy to make something for a long time, but it hurts to be original? Wind a thread or rope around the bottle absolutely randomly, but so that gaps remain, and apply paint of your favorite color from a can onto this kind of cocoon. When your “painting” dries a little, unwind the bottle. Unusual? Let's move on.
The candle holder bottle is unique due to the idea of a candle holder in the form of a spiral, fixed in the neck with a ring
Option #2 – from glass jars
The main problem of a glass container as a base for a homemade lamp is absolutely transparent surface, not scattering light. The task facing you in the process of making a glass lamp with your own hands is to fragmentarily decorate a transparent vessel in such a way that it, nevertheless, works in places for transmission - scatters and smoothes out the light from a candle or light bulb placed inside.
To make it easier to remove melted wax from the bottom of the candle holder jar, pour a little sand or pebbles into it
What can be done with a prosaic, but beautifully shaped jar, left as a memory from the once eaten exotic pickles? It all depends on the style in which the newly-minted lamp is designed. If you want a country style, wrap the jar with jute rope, fixing it to the glass with silicone glue. Do you want vintage style? Cut long narrow strips of colorful chintz, cotton lace or guipure and “dress up” your jar in your great-grandmother’s outfit. Do you like techno style? Remove the voltage coils and diode lamps from the old TV or tape recorder - wrap the copper wire around the can. Glue cylindrical bulbs of LEDs as decoration - they will further refract and modify the flow of light, and the lamp will turn into some kind of object of alien origin.
Unlike bottles, glass jars are rarely multi-colored - paint them with bright stained glass paints
An original idea for decorating a lamp for a dacha in pop art style – painting jars in multi-colors luminescent paints, printed on inner surface glass jar in the form of spots irregular shape. Accumulating sunlight during the day, at night the jars will emit a soft, unobtrusive glow, shimmering with rich shades of neon blue, pink or lemon. By arranging glass containers of different heights and diameters, painted in matching color scheme phosphors, you can create a bright compositional group in your garden, illuminating the path to your house, alpine slide or a flowerbed.
A jar covered in myriads small dots, applied with phosphor, emits a soft, elegant light
Option #3 – from tin cans
After drinking beer and eating sprat in tomato sauce, do not rush to throw the cans into the trash - everything will come in handy in the dacha farm. For example, to implement extraordinary ideas in creating country lamps that can give your garden an unforgettable look.
What is needed for this? A hammer, nails of different diameters and a cylindrical piece of wood. Sketch out the motif of the design on paper - preferably it should not be a very complex closed pattern. Now attach your sketch to tin can, and put a piece of wood inside it - it will protect the tin from deformation. By punching holes at equal distances with nails, transfer the design to the jar - you will get holes through which delicate light will leak.
An ordinary beer can can turn into an exotic lamp due to the pattern formed by small holes
Who would have thought that such an unusual lamp could be made from the combination of a can of canned food and wooden clothespins?
Option #4 – from building materials
After construction, dachas often remain different building materials– cement, plaster mixtures, liquid nails, etc. You can’t store such mixtures for a long time - they quickly absorb moisture and form lumps, but you don’t even dare throw them away. Don't despair, here are a couple fresh ideas, how you can attach building materials to the benefit of business, namely, to create country lamps.
Using unnecessary residues of cement and plaster mixtures, you can make a rather original lamp
Take a large and small plastic bottle, cut off the bottom and place one inside the other, securing them with a threaded pin. Turn the resulting structure upside down and install it, say, on a tin can of a suitable diameter. Mix the cement mixture and fill the space between the two bottles, shaking the mold periodically to fill it evenly. After the solution has hardened, cut the bottles and release the lampshade.
Forming from cement mortar separate fragments, connect them together - you will get a patterned egg-lamp of unprecedented beauty
Option #5 – made of wood and ropes
Having selected small but expressive dry twigs, stick them overlapping in a chaotic order on the child's inflatable ball. Once the glue has set, carefully remove your design from the balloon and deflate it. The eco-style lampshade is ready, you just need to refill the light bulb and connect the lamp to the network.
Unnecessary branches from cut trees will be an excellent material for creating a country lamp in the shape of a ball.
By the same principle, using inflatable balloons, make a lampshade in the form of a hemisphere from jute rope. To do this, draw a border on the ball and, gradually gluing the intersections, wrap it with rope. After the glue has dried, carefully deflate the balloon and remove the rope shade from it.
Snow-white openwork rope lamps will create a festive atmosphere on your terrace or patio area
In order to make a lamp from wood, you do not need to know how to plan or saw - there are a lot of ready-made wooden semi-finished products that you just need to skillfully apply.
If you twist birch bark into a cone shape, you will get a very delicate and elegant lampshade for your lamp.
Don’t rush to get rid of stumps - you can use them not only to make a stool, but also an extravagant country lamp
Option #6 – made of plastic
Plastic bottles have been in use for a long time, both in the tail and in the mane for a variety of country crafts. What our inventive people haven’t come up with, conjuring their “very skillful” hands over plastic bottles. Not wanting to lag behind the mass trend, we hasten to offer our version of “recycling” plastic bottle by creating an extraordinary lamp.
This is an extraordinary lamp - either a hedgehog or an insect, which can be made from an ordinary plastic bottle
Plastic ball lamp. 1. Cut off the bottom 2. Glue it together 3. Bend it along the radius 4. Form a ball 5. Install it on the base 6. Connect it to the network
Lampshade for a lamp made of plastic leaves. 1. Cut out the rectangles 2. Cut out the leaves 3. Melt the edges with a soldering iron 4. Connect the leaves with wire
So, we cut the bottle into rectangles, from which we cut out leaves. We melt the edges of the sheet with a soldering iron, giving it a more natural outline. We burn 2 holes with a hot needle and thread copper wire through them without insulation. We collect branches from individual leaves and form them into a spherical shade.
Don’t rush to throw away disposable cups after receiving guests - it’s better to glue them together into a cute multi-colored lamp
Buy ping pong balls, glue several circles from them, and then connect them vertically - the futuristic chandelier is ready
An original chandelier can be made from other plastic products - disposable tableware, plastic cups and ping-pong balls. Due to the initially conical and spherical shape of these products, gluing them will steadily lead you to the creation of a spherical or cylindrical lamp.
Bright lamps made of multi-colored beads will help create a cheerful and relaxed atmosphere at your dacha.
String large plastic beads onto a wire, twist it into a spiral and form a spherical shade of small diameter. You might get enough original chandelier for a summer residence, if you arrange balls of beads of different colors and diameters, attaching them on long hangers to the frame.
Old CDs and records cluttering your closet are now very useful - they will make amazing lamps for the garden
Here is a unique idea for a lamp for music lovers - those whose home is littered with old music storage devices - discs and records. Surprisingly, old CDs can make a wonderful lamp. It is enough just to drill, having previously marked it with a marker, 5 holes at equal distances from each other around the circumference of the disk, not getting too close to the edge, and then fasten the disks together with wire. Such a multifaceted structure can have any diameter depending on the intended size or your patience. If the lamp is supposed to be a floor or table lamp, then glue 3-4 erasers to one of the disks that acts as a base. By hanging several disc balls on a metal plate, you will get an original futuristic chandelier to illuminate your terrace or patio area.
Corrugated plastic pipe perfectly transforms into a shell lamp - all you have to do is tuck the light cord into the pipe
Option #7 – from old household utensils
The most convenient thing about metal household utensils is the already existing perforation, which can create light spots of unusual beauty. A simple grater, colander or strainer are ready-made lampshades for your homemade lamps. Having disconnected the handles from the two sieves, tie them with wire - you will get a lampshade in the form of a ball. Disguise rust stains or peeling enamel by covering your creation with bronze or silver paint from a can - a retro-inspired lamp with a technogenic flavor is ready.
Drill holes in an old saucepan with a drill or insert a light bulb into a regular grater - you will create indescribable light effects
Don’t rush to throw away your grandmother’s dinnerware in creepy roses with a thin web of small cracks - glue the saucer to the cup with super glue, drill a hole for the electrical wire - and the vintage lamp will become a true decoration of a nostalgic summer house or gazebo. Even an old tureen can be an excellent lampshade for country kitchen– carefully make a hole in its bottom, thread the electrical cord and secure the cartridge.
An old earthenware set that you inherited from your grandmother can be perfectly modified into a retro lamp
We hope that interesting ideas , those proposed by us will help some Plyushkins find a worthy justification for their craving for accumulating unnecessary things. Now they have the opportunity to breathe life into old things new life– creating unusual lamps for your favorite garden.
Experts recommend lighting the garden before planning the garden area and before performing landscaping work. This is due to the fact that all technical elements of lighting systems must be carefully protected from negative climatic influences: rain, snow, gusts of wind, etc. It is also necessary to provide in detail the location of the lamps, which should fit harmoniously into the composition of the garden and help owners effectively navigate the space at night.
Main purpose
When lighting various elements and open areas, the main thing is stylish decorative design, effectively highlighting all the advantages of the landscape and allowing you to consider the beauty of individual objects, trees and shrubs. Often, outdoor lighting of the area is used for additional security of the house and to ensure unhindered movement along the paths.
To decorate and illuminate the garden, lamps in the form of floor lamps of various heights are most often used. Modern manufacturers offer a huge selection of lighting devices in various architectural styles: High-tech, Classic, Minimalism, etc. The efficiency of work with proper design, selection of lamps and their installation does not depend at all on stylization.
Garden paths and steps
When planning your own garden lighting, you should keep practical goals in mind. The lighting of paths and staircases should illuminate them with high quality, so that it is safe for adults and children, permanent residents of the house and its guests to walk along them. Glowing lanterns, harmoniously located at a certain distance from each other, should help you move around the garden, while simultaneously creating the effect of a mysterious tunnel.
Today, special lamps built into tiles or other coverings of garden paths are very popular. Equipped with technologically advanced LEDs, such illumination is not visible during the day, but with the onset of darkness a pinpoint glow appears with a soft, dim light that instantly transforms the surrounding area.
Pay attention! When lighting a staircase or several steps, it is necessary to focus on all steps, lighting each element separately. To achieve these goals, a wide variety of lamps can be used: spotlights, flashlights, built-in tubes and hidden lighting.
Water
During the day, any garden pond is individual and interesting in itself. But with the onset of twilight its beauty fades, so only efficient system lighting can give a pond, pool, waterfall or fountain new life in the dark. The most popular and popular sources artificial light- these are ordinary flashlights, which are usually placed along the edges of a reservoir to clearly delineate its boundaries. To further emphasize the composition of plants and decorative elements near the shore, experts advise installing lighting directly in the thickness of the foliage with the light directed at sculptures or flowing fountains.
The light “from within” the garden composition looks quite unusual. In this case, the illumination is placed in the reservoir, using special lamps with a protective casing. Modern decorators and landscape designers widely use floating lamps to illuminate ponds and other bodies of water, made in a wide variety of styles in the form of imitation animals and plants, geometric objects and transparent spheres.
Video
For information on the types of garden lamps, see the following video:
Photo
