PentairWater is one of the most well-known companies in the global market for products used for water treatment and water purification. The company is constantly developing technology, developing and producing innovative products, improving existing methods and technology. Wide network of partners in the most different areas: from research centers to partners selling products around the world, and high standards qualities allow PentairWater to be one of the leaders among suppliers of technologies and equipment for water purification in industrial and domestic water treatment.

Pentair Water control valves are available under a variety of brands. A control valve is a type of water treatment equipment used in column-type rapid filters. The main function of the control valve is to control water flows. It is a multi-way switch with a manual or electromechanical drive and all the necessary automation. Its purpose is to switch the flow of purified water filtered through the filter medium to ensure timely regeneration of the filter medium. There are valves that allow regeneration of the filter media depending on the volume of purified water or at a given time.

Depending on the type of media used in the filter, valves are used that allow regeneration of the filter media by washing with a reverse flow of water or a special reagent. Table salt or potassium permanganate can be used as a reagent. In case of using a load that requires regeneration with a reagent, five-cycle control valves are used with the following switchings:

1. Filtration
2. Backwash
3. Regeneration
4. Direct flush
5. Filling the reagent tank with water

In the case of using a filter media that requires only periodic backwashing, three-cycle control valves are used:

1. Filtration
2. Backwash
3. Direct flush

Column filters according to the type of filter media are divided into the following groups:

1. Sedimentary – for mechanical cleaning
2. To remove iron and manganese
3. For deferrization and pH correction
4. For removal of iron, manganese and hydrogen sulfide
5. For sorption purification
6. To soften water – remove calcium and magnesium salts

Geyser Group of Companies is one of the leaders Russian market water treatment, uses a number of PentairWater items in its offer to the water treatment market. This is due to the high reliability of the products.

When designing, depending on the objectives of a specific project, the engineering service of the Geyser company will select the optimal equipment taking into account all the requirements of the project. The practical experience and deep knowledge of the Geyser design department specialists, as well as a large number of previously implemented projects, allows us to solve practical problems for design and installation, maintenance, modernization and reconstruction of water treatment systems at facilities of any required capacity.

The control units allow you to wash the fast filter loads with a reverse flow of water (from bottom to top), a direct flow of water (from top to bottom), wash the reagent by sucking it through the built-in ejector, and automatically fill the reagent tank with water. The blocks consist of valves that turn on, turn off and redirect the flow of water, and a controller that ensures the operation of the valves, that is, it sets the sequence for switching flows.

The design of valves in control units is as follows: the direction of water flow is changed by switching valves that open or close the channels. The valves, under the influence of cams located on the cam shaft in the upper part of the control unit (not in the water, but outside), rise or sit on the saddle, ensuring the opening or closing of the channels; All kinds of contaminants (including sand) passing with water through the channels of the block controls, with this design they cannot damage it. This is what it's all about fundamental difference Pentair valves from similar products from other manufacturers - they have no rubbing parts in the working environment (that is, in water).
Control units are made from Noryl (a thermoplastic patented by GE Plastics)

Valves can be divided into two groups according to their operating principle:

1. Filter valve - three-cycle (operating mode, backwash and quick wash). This group includes valves of the Performa 263, Performa Cv 273, Magnum Cv F, Magnum IT F series.

2. Softener valve - five-cycle (operating mode, backwashing, chemical regeneration, direct washing, filling the regenerant tank). This group includes valves series 255, Performa 268, Performa Cv 278, Magnum Cv SN, Magnum IT SN.

Pentair control valves use Various types controllers:

1. With regeneration based on the results of time control (time clock). The frequency of regeneration is determined by the user, based on the quality of the water and the nature of water consumption.
Regeneration cycles are fixed.

2. With regeneration based on the results of monitoring the volume of water passed through the filter (demand). A microprocessor connected to a turbine with a sensor calculates a schedule of water consumption by day of the week and schedules washing on the day when the filter loading resource is exhausted. Customizable regeneration cycles.
All control units are tested to operating pressure from 1.4 to 8.3 atm.

Interface type - LCD.
Optionally they can be equipped with electrolytic chlorine generators (art. 35626) for resin disinfection.

Filter control unit

Softener control units:

1. By timer

The company is one of the world market leaders in the development and production of innovative products and systems used throughout the treatment, supply and storage of water. The company's activities and success are based on criteria such as continuous development of new products, high productivity, competence, corporate ethics and the desire to lead the market. The company's personnel have such qualities as a serious approach to their work, respect for people and environment, and is also armed with deep practical knowledge in his field of production. Strong relationships with customers and high quality standards allow us to be considered one of the main manufacturers of technologies and equipment for water treatment.

Water softeners Pentair Water

FILTER MATERIAL: Strong acid gel-type cation exchange resin in Na-form based on sulfonated polystyrene.

FEATURES: Immediate or delayed regeneration of the filter medium. Alternating the working process and the regeneration cycle (restoring the ion-exchange capacity of the resin). Regeneration of the filter material can be carried out automatically based on a signal from the built-in timer (once per specified number of days) or built-in counter (based on the volume of water passed).

DESCRIPTION: The water softening installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, a drainage distribution system, and a reagent tank.

PRINCIPLE OF OPERATION: Water softening is based on the exchange of hardness salt ions (calcium and magnesium) for sodium ions as it passes through a layer of ion exchange resin. Once the exchange capacity is depleted, the cation exchanger loses its ability to soften water and must be regenerated. Regeneration of Na-cation exchanger is achieved by filtering a solution of sodium chloride (table salt) with a concentration of 5-8% through it.

Periodic water softening units Pentair Water FS series with FLECK control valves

Periodic water softening filter with timer regeneration. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.

Model	Production, m3/h	vendor code	price, rub.
FS 50-08T		0-25-0320	24438,40
FS 77-08T		0-25-0070	26335,75
FS 50-09T		0-25-0340	25486,65
FS 77-09T		0-25-0072	27384,00
FS 50-10T		0-25-0360	28133,70
FS 77-10T		0-25-0074	30031,05
FS 50-12T		0-25-0380	31724,00
FS 77-12T		0-25-0076	33621,35
FS 50-1ZT		0-25-0390	34407,10
FS 77-1ZT		0-25-0078	36304,45
FS 77-14T		0-25-0080	44346,40
FS 77-16T		0-25-0082	54992,35
FS 28-18T		1-25-8320	88054,05
FS 28-21T		1-25-8330	106442,70
FS 28-24T		1-25-8340	129,568,25

Periodic water softening filter with water meter regeneration. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C 24 V, 50 Hz.

Model	Production, m 3 / h	vendor code	price, rub.
FS 50-07M**		0-25-8430	26707,10
FS 50-09M*		0-25-0190	32225,20
FS 50-08M		0-25-0510	28642,60
FS 77-08M		0-25-0582	28568,75
FS 50-09M		0-25-0530	29690,85
FS 77-09M		0-25-0584	29617,00
FS 50-10M		0-25-0550	32337,90
FS 77-10M		0-25-0586	32264,05
FS 50-12M		0-25-0570	35928,20
FS 77-12M		0-25-0587	35854,35
FS 50-13M		0-25-0580	38611,30
FS 77-1ЗМ		0-25-0588	38537,45
FS 77-14M		0-25-0590	46579,40
FS 77-16M		0-25-0595	57225,35
FS 28-18M		1-25-8350	111307,70
FS 28-21M		1-25-8360	129695,30
FS 28-24M		1-25-8370	159091,80

Continuous units Pentair Water TS series with FLECK control valves

PURPOSE: Removing hardness salts from water.

FILTER MATERIAL: Strong acid cation exchange resin of Na-form gel type based on sulfonated polystyrene.

FEATURES: Continuous supply of softened water. Regeneration (restoration of the ion-exchange capacity of the resin) of the filter material is carried out automatically according to the signal from the built-in counter (based on the volume of water passed through).

CONTROL: Programmable electronic unit.

DESCRIPTION: The installation consists of two buildings, a control unit, a filter medium, a supporting layer of gravel, a drainage and distribution system, and a reagent tank.

PRINCIPLE OF OPERATION: Water softening is based on the exchange of hardness salt ions (calcium and magnesium) for sodium ions as it passes through a layer of ion exchange resin. Once the exchange capacity is depleted, the cation exchanger loses its ability to soften water and must be regenerated. Regeneration of Na-cation exchanger is achieved by filtering a sodium chloride solution with a concentration of 5-8% through it.

Water softening filter continuous action with regeneration by water meter Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C 24 V, 50 Hz.

Model	Production, m 3 / h	vendor code	price, rub.
TS 91-08M		0-25-0840	45167,85
TS 91-09M		0-25-0860	47264,35
TS 91-10M		0-25-0870	52558,45
TS 91-12M		0-25-0880	59739,05
TS 91-13M		0-25-0900	65105,25
TS 90-14M		0-25-0760	90637,05
TS 95-16M		1-25-0790	166709,90
TS 95-18M		1-25-0800	197466,15
TS 95-21M		1-25-0810	226222,50
TS 95-24M		1-25-0820	278744,55

Water deferrization plants Pentair Water FBI series

WATER DEIRONIZATION INSTALLATIONS, IRON AND MANGANESE PURIFICATION WITH "FLECK" CONTROL VALVES

PURPOSE: Removing iron and manganese from water.

FILTER MATERIAL: Filter media is used natural origin BIRM, the granules of which are coated with a film of manganese dioxide.

CONTROL: Electromechanical timer or programmable electronic unit.

DESCRIPTION: The water deferrization plant consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.

Iron removal filter with timed washing. BIRM filter media that does not require reagents for regeneration. The maximum permissible concentration of iron is 10 mg/l. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.

Model	Production, m3/h	vendor code	price, rub.
FBI 50-08T		0-25-1150	20597,15
FBI 77-08T		0-25-1010	22447,95
FBI 50-09T		0-25-1180
FBI 77-09T		0-25-1012	24003,70
FBI 50-10T		0-25-1210	24377,15
FBI 77-10T		0-25-1014	26227,95
FBI 50-12T		0-25-1240	28754,95
FBI 77-12T		0-25-1016	29935,15
FBI 77-13T		0-25-1018	31865,05
FBI 77-14T		0-25-1020	44142,35
FBI 77-16T		0-25-1022	49348,25
FBI 28-18T		1-25-1340	75045,25
FBI 28-21T		1-25-1350	86594,90
FBI 31-24T		1-25-1360	151130,00
FBI 31-30T		1-25-1370	194944,05
FBI 31-36T		1-25-1380	238837,55

Water deferrization filter with timer regeneration. MGS filter media with regeneration with potassium permanganate solution. The maximum permissible concentration of iron is 15 mg/l. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.

Model	Production, m 3 / h	vendor code	price, rub.
FGI 50-08T		0-25-1500	27146,70
FGI 77-08T		0-25-1400	28997,85
FGI 50-09T		0-25-1520	29524,95
FGI 77-09T		0-25-1402	31376,10
FGI 50-1 FROM		0-25-1540	34157,20
FGI 77-1 FROM		0-25-1404	34422,85
FGI 50-12T		0-25-1560	37936,50
FGI 77-12T		0-25-1406	39117,05
FGI 77-1ЗТ		0-25-1408	41703,20
FGI 77-14T		0-25-1410	55954,50
FGI 77-16T		0-25-1412	61163,90
FGI 28-18T		1-25-1640	83320,65
FGI 28-21T		1-25-1650	95940,60
FGI 31-24T		1-25-1660	164969,70
FGI 31-30T		1-25-1670	215671,05
FGI 31-36T		1-25-1680	268776,55

Sorption and clarification plants Pentair Water FC series

INSTALLATIONS FOR WATER PURIFICATION FROM ORGANIC COMPOUNDS AND CHLORINE WITH "FLECK" CONTROL VALVES

PURPOSE: Removing chlorine, organic compounds from water, eliminating unpleasant odor and taste.

FILTER MATERIAL: Granular Activated carbon.

FEATURES: Washing of the filter material can be carried out manually or automatically.

CONTROL: Electromechanical timer or programmable electronic unit.

BENEFITS: Highly effective removal of odor, color and dissolved organic compounds. Use over a wide pH range. High sorption capacity. Abrasion resistance.

OPERATING PRINCIPLE: Pressure filters with granular activated carbon. Organic compounds, petroleum products and chlorine are adsorbed on the granules of the filter media and are subsequently washed into the drain during backwashing. Filter with washing by timer. Loading - activated carbon. Operating pressure 2.5-6.0 bar operating temperature range +5...+37°C. 24 V, 50 Hz.

Model FC 50-08T	Production, m 3 / h	vendor code 0-25-1700	price, rub. 21185,15
FC 50-09T		0-25-1710	23034,90
FC 50-10T		0-25-1720	25553,15
FC 50-12T		0-25-1730	30283,75
FC 77-1ZT		0-25-1740	33629,05
FC 77-14T		0-25-1750	46611,95
FC 77-16T		0-25-1760	52631,25
FC 28-18T		1-25-1770	79441,95
FC 28-21T		1-25-1780	92801,80
FC 28-24T		1-25-1790	159925,5
FC 31-30T		1-25-1800	196264,25
FC 31-36T		1-25-1810	235754,75

Sedimentation plants Pentair Water FM series

INSTALLATIONS FOR WATER PURIFICATION FROM MECHANICAL IMPURITIES WITH "FLECK" CONTROL VALVES

Manufacturer: Pentair Water, Europe

PURPOSE: Removing mechanical and organic suspensions, turbidity, sediment, rust from water.

FILTER MATERIAL: Filter-Ag - anhydrous aluminum silicate. In high-capacity installations (cylinders with a diameter greater than 14 inches), a combined load of anthracite, Filter-Ag and garnet is produced.

FEATURES: Washing of the filter material can be carried out manually or automatically. Anthracite, Filter-Ag and Garnet provide three-stage water purification, first from large contaminants, then from medium-sized impurities and, finally, from small particles.

ADVANTAGES: Low pressure losses. Due to the low weight of Filter-Ag, the volume of water required for rinsing is reduced. The high adsorption capacity of the filter material allows you to reduce the frequency of washing the installation.

CONTROL: Electromechanical timer or programmable electronic unit.

DESCRIPTION: The installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.

OPERATING PRINCIPLE: Pressure filters with granular filter media. The suspension is retained in the filter media layer and is subsequently washed into the drain during backwashing.

Filter with timed washing. Loading - Filter-Ag. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.

Model FM 50-08T	Production, m 3 / h	vendor code 0-25-2200	price, rub. 18854,15
FM 50-09T		0-25-2202	19538,40
FM 50-10T		0-25-2205	20891,15
FM 50-12T		0-25-2210	24223,15
FM 77-13T		0-25-2220	26636,05
FM 77-14T		0-25-2230	36821,75
FM 77-16T		0-25-2240	42027,65
FM 28-18T		1-25-2250	66509,45
FM 28-21T		1-25-2260	76967,80
FM 28-24T		1-25-2270	131134,50
FM 31-30T		1-25-2280	172982,20
FM 31-36T		1-25-2290	207114,95

Acidity corrector Pentair Water series FH

WATER PURIFICATION UNITS FOR ADJUSTING pH WITH "FLECK" CONTROL VALVES

PURPOSE: Increasing the pH of water and reducing the corrosive properties of water.

FILTER MATERIAL: The material used is calcite - lime granules.

FEATURES: Washing of the filter material can be carried out manually or automatically.

CONTROL: Electromechanical timer or programmable electronic unit.

DESCRIPTION: The installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.

ADVANTAGES: Use in a wide pH range. High sorption capacity, abrasion resistance.

OPERATING PRINCIPLE: Pressure filters with filter media. Water entering the filter dissolves calcite, thereby increasing the pH value by no more than 1 unit.

Filter with timed washing. Download - Calcite. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.

Model FH 50-08T	Production, m 3 / h	vendor code 0-25-2500	price, rub. 19484,15
FН 50-09T		0-25-2510	20483,40
FH 50-10T		0-25-2520	22151,15
FH 50-12T		0-25-2530	25861,15
FН 77-13T		0-25-2540	28526,05
FН 77-14T		0-25-2550	39467,75
FН 77-16T		0-25-2560	43449,35
FH 28-18T		1-25-8380	66460,45
FH 28-21T		1-25-8390	74661,30
FH 28-24T		1-25-8400	133045,50

Ultraviolet disinfectants

Manufacturer: Sterilight, Canada

Quartz lamp in a housing made of of stainless steel. Operating temperature range +2...+40° C operating pressure up to 8.6 bar. 230 V, 50 Hz.

Model	Production, m 3 / h	vendor code	price, rub.
S8Q-PA/2		0-25-6270	19953,85
S12Q-RA/2		1-25-6274	22730,40
		0-25-6276
SP600-NO with UV sensor		2-25-6580	42192,50
S1Q-PA/2		2-25-6640
SP950-NO with UV sensor		2-25-6650	47691,00

Household filters

Training system drinking water

Multi-stage drinking water preparation system. The kit can be easily installed directly under the kitchen sink.

Maximum operating pressure - 8 bar.

Contents: plastic flasks with cartridges on a connection bracket, connection pipes, sink faucet, filter wrench

Operating temperature range +2...+52°С

System reverse osmosis

Manufacturer: Wester, England

Storage tank for filtered water with a useful capacity of 10 liters. Working pressure 2.8-6 bar

reverse osmosis membrane, sink faucet, filter wrench.

Operating temperature range +2...+40° C

Reverse osmosis system

Manufacturer: Aquafilter, USA

Multi-stage drinking water preparation system with reverse osmosis technology

Storage tank for filtered water with a useful capacity of 10 liters.

Working pressure 2.8-6 bar

Contents: plastic flasks with cartridges on a connection bracket, connection pipes, storage tank 10 l,

reverse osmosis membrane, sink faucet, filter wrench. Operating temperature range +2...+40° C

Name	Production, l/day	vendor code	price, rub.
Filter 5 stages	190 - 250	0-25-5050
5th stage filter (mineralizer)	190 - 250	0-25-5060
Filter 5 stages (pump booster)	190 - 250	1-25-5070	10325,00
4 stage filter	190 - 250	1-25-5040

Replacement elements for reverse osmosis systems

Manufacturer: Aquafilter, USA

Replacement elements for reverse osmosis systems 4-5 stages

Name	vendor code	price, rub.
Membrane 50 GPD	0-25-5220
Membrane 75 GPD	0-25-5230
Membrane 100 GPD	2-25-6010
Postfilter	0-25-5240
Mineralizer	0-25-5320
Booster pump	0-25-5270

Wash filters

Manufacturer: BWT, Germany

Wash filters with a mesh made of polymer material. Filtration fineness 100 microns Maximum operating pressure 16 bar, temperature range +5...+30°C For HW series models, maximum operating pressure 10 bar, temperature range +5...+80°C

Name	Productivity, m 3 /hour	vendor code	price, rub.
Infinity M 3/4" (with industrial manual)		0-25-2150
Infinity M 1" (with industrial manual)		0-25-2152
Infinity A/T 3/4" (with automatic time delay)		0-25-2158	14525,00
Infinity A/T 1" (with automatic time delay)		0-25-2160	14542,00
Avanti HWS 3/4" (with manual control + reducer + check valve)		0-25-2162
Avanti HWS 1" (with manual control + reducer + check valve)		0-25-2164
Protector BW 1", 3/4"		0-25-2166
Protector HW 1", 3/4" (hot water)		0-25-2172
Infinity M 11/4" (with industrial manual)		2-25-2600
Infinity M 11/2" (with industrial manual)		2-25-2602	10489,50
Infinity M 2" (with industrial manual)		2-25-2604	11140,50
Infinity M/DR 3/4" (with industrial manual + gearbox)		2-25-2610
Infinity M/DR 1" (with industrial manual + gearbox)		2-25-2620
Infinity A 3/4" DR (with auto industrial)		2-25-2630	17166,10

Reagent tanks

Manufacturer: Pentair Water, Europe

Name	vendor code	price, rub.
Potassium permanganate tank	0-25-7000
Salt tank 100 l (assembled)	0-25-7010
Salt tank 200 l (assembled)	0-25-7020
Salt tank 300 l (assembled)	1-25-7030	10769,15
Salt tank 300 l for 1700 (assembled)	1-25-7040	16676,80
Salt tank 500 l for 1700 (assembled)	1-25-7050
Cabinet shaft (assembled)	0-25-7060
Shaft for mini-cabinet (assembled)	0-25-8510

Cylinders and accessories

Name	vendor code	price, rub.
Adapter	0-25-7300
Cover 4"	2-25-9020
Ballon 0844	0-25-7310
Ballon 1035	0-25-7320
Ballon 1054	0-25-7330
Ballon 1252	0-25-7340
Balon 1354	0-25-7350
Balon 1465	0-25-7360	10553,90
Balon 1665	0-25-7370	12543,65
Balon 1865	1-25-7380	18800,25
Balon 2160	1-25-7390	23927,75
Ballon 2472	1-25-7400	36532,30
Ballon 3072	1-25-8410	56266,70
Balon 3672	1-25-8420	78234,80
Lower distribution basket with water riser pipe 1"	0-25-7500
Beam distributor with hydrogen. pipe 2" (for cylinder 14"-18")	0-25-7510
Beam distributor with hydrogen. pipe 2" with adapter 50/25 (for cylinder 14"-18")	0-25-7520
	1-25-7530
Beam distributor with hydrogen. pipe 2" (for cylinder 21"-24")	1-25-7540
Beam distributor with hydrogen. pipe 2" (for cylinder 30)	1-25-7550
Beam distributor with hydrogen. pipe 2" (for cylinder 36)	1-25-7560

FLECK control valves

Manufacturer: Pentair Water, Europe

FLECK CONTROL VALVES

Product code	Name of product	Retail price
Electromechanical valves with timed regeneration
1-25-8460	Ex. valve FLECK 2850 1600 (IN 3/BLFC 1)	34339,55
1-25-8470	Ex. valve FLECK 2850 1700 (IN 3С/BLFC 2)	36328,95
Electromechanical valves with timed flushing
1-25-7640	Ex. valve FLECK 2850 FILTRE (piston NBP)	39818,45
1-25-7650	Ex. valve FLECK 2850 FILTRE (IN -/BLFC -)	35615,30
1-25-7660	Ex. valve FLECK 3150 FILTRE (IN -/BLFC -)	75034,05
1-25-7670	Ex. valve FLECK 3150 FILTRE (piston NBP)	79946,30
1-25-8480	Ex. valve FLECK 2850 FILTRE (IN -/BLFC -) MS	30544,85
Electromechanical valves with water meter regeneration
1-25-8490	Ex. valve FLECK 2850 1600 ECO (IN 3/BLFC 1) 100M3	57593,20
1-25-8450	Ex. valve FLECK 2850 1700 1 meter (IN 4C/BLFC 2.0)	59581,55
Electronic valves with timed regeneration
0-25-7600	Ex. valve FLECK 5000 1600 SE (IN 1/BLFC 0.5)	14665,35
0-25-7610	Ex. valve FLECK 5000 1600 SE (IN 2/BLFC 0.5)	14665,35
2-25-9140	Ex. valve FLECK 5000 1600 SE (IN 1/BLFC 0.5) MS	15177,40
0-25-7620	Ex. valve FLECK 7700 1600 (IN 2/BLFC 0.5)	16974,65
0-25-7630	Ex. valve FLECK 7700 1600 (IN 1/BLFC 0.25)	16974,65
2-25-9160	Ex. valve FLECK 7700 1600 (IN 3/BLFC 0.5)	16974,65
Electronic valves with timed flushing
0-25-7680	Ex. valve FLECK 5000 FILTRE SE (IN -/BLFC -)	14207,90
0-25-7690	Ex. valve FLECK 7700 FILTRE (IN -/BLFC -) MS	16516,50
Electronic valves with water meter regeneration
0-25-7700	Ex. valve FLECK 5000 1600 ECO SE (IN 1/BLFC 0.5)	18869,55
0-25-7710	Ex. valve FLECK 5000 1600 ECO SE (IN 2/BLFC 0.5)	18869,55
0-25-7720	Ex. valve FLECK 7700 1600 ECO (IN 1/BLFC 0.5)	19207,65
0-25-7730	Ex. valve FLECK 7700 1600 ECO (IN 2/BLFC 0.5)	19207,65
2-25-9162	Ex. valve FLECK 7700 1600 ECO (IN 3/BLFC 0.5)	19207,65
0-25-7740	Ex. valve FLECK 9000 1600 SE 3/4" (IN 3/DLFC 5/BLFC 1)	35616,00
1-25-7750	Ex. valve FLECK 9500 1600 ECO SE (IN 3/DLFC 7/BLFC 1)	90745,55
1-25-7760	Ex. valve FLECK 9500 1600 ECO SE (IN 4C/DLFC 15/BLFC 1)	92961,05
1-25-7770	Ex. valve FLECK 9500 1600 ECO SE 1" (IN 3/DLFC 10/BLFC 1)	90874,70
1-25-7780	Ex. valve FLECK 9500 1600 ECO SE 1" (IN C/DLFC 5/BLFC 2)	92961,05
0-25-7790	Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 2/DLFC 5/BLFC 1)	29755,60
0-25-7800	Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 1/DLFC 2.4/BLFC 0.5)	29755,60
0-25-7810	Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 2/DLFC 3.5/BLFC 1)	29755,60

Accessories for Fleck valves

Manufacturer: Pentair Water, Europe

Name	vendor code	price, rub.
Set plate for valves 5000,5600,2510,8500,9000	0-25-7900
Connecting pipe for twin systems 9000 (set)	0-25-7910
Connecting pipe for twin systems 9500 (for 16" cylinder)	1-25-7920	10202,15
Connecting pipe for twin systems 9500 (for cylinder 18-20")	1-25-7930	10202,15
Connecting pipe for twin systems 9500 (for 24" cylinder)	1-25-7940	10130,05
Adapter for control valve 7700	0-25-8080

RF hardness converter

Manufacturer: Termit, Russia

Electronic device for treating water against hardness deposits. Mounted on the water return pipeline to heating installation or on the inlet highway. Pipe diameter up to 60 mm. The operating temperature range in the room is 0...+60°C. Maximum pipeline temperature +70°C. 220 V, 50 Hz, 2.0 W.

Filter media and consumables

Name	Packaging	vendor code	price, rub.
BIRM - sorbent (1 l)		0-25-8300
MGS-Greensand-sorbent (1 l)		0-25-8320
Calcite (1 l)	22.68 l	0-25-8330
Quartz. gravel (1 l)		0-25-8340
Quartz. sand (1 l)		0-25-8350
Filter Ag (1 l)		0-25-8360
Anthracite (1 l)		0-25-8370
Garnet (1 l)		0-25-8380
Granular activated carbon (1 l)		0-25-8390
Potassium permanganate (per 1kg)		0-25-8400
Tablet salt (1 bag)		0-25-8410
Granion resin K001-8 Na FG (1 l)		0-25-8420
MZhF - sorbent (1 kg)		1-25-8320
MTM (1 l)		2-25-9174
Filler FM-23 AMDX		2-25-9175
Granion resin D001 Na FG (1 l)		2-25-9176
Resin SR-1LNa (1 l)		2-25-9180

Accessories and installation materials

Name	vendor code	price, rub.
Air Pump AP-2 compressor	1-25-6060	20309,10
Valve PR-25-100	1-25-6020
bracket	1-25-6160
Nipple JG PI 011222 3/8ts x 1/4rn	1-25-6130
Nipple JG CI 321214S 3/8 c x 1/2 rv	1-25-6120
Nipple JG 3/8 SCV 3/8ts x3/8ts	1-25-6140
Tube 3/8// (1m)	1-25-6150
Machine. air valve S-05-P DN25	1-25-6040
Flow sensor for Air Pump 256-578 Flo compressor	1-25-6266
Proportional dosing complex (assembled)	0-25-8530
Solenoid valve 1" 24 V normally closed	0-25-8460
Solenoid valve 1" 24 V normally open	0-25-8470
Solenoid valve 1" 230 V normally closed	2-25-9200
Solenoid valve 1" 230 V normally open	2-25-9230
Aeration column head	1-25-6155

PURPOSE: Removing hardness salts from water.

The control units allow you to wash the fast filter loads with a reverse flow of water (from bottom to top), a direct flow of water (from top to bottom), wash the reagent by sucking it through the built-in ejector, and automatically fill the reagent tank with water. The blocks consist of valves that turn on, turn off and redirect the flow of water, and a controller that ensures the operation of the valves, that is, it sets the sequence for switching flows.

The design of valves in control units changes: the direction of water flow is changed by switching valves that open or close the channels. The valves, under the influence of cams located on the cam shaft at the top of the control unit (not in the water, but outside), rise or sit on the seat, ensuring the opening or closing of the channels. With this design, all kinds of contaminants (including sand) passing with water through the channels of the control unit cannot damage it. This is the fundamental difference between Pentair valves and similar products from other manufacturers - they have no rubbing parts.

Control units are made of Noryl (a thermoplastic patented by GE Plastics). Valves can be divided into two groups according to their operating principle:

1. The filter valve is three-cycle (operating mode, backwash and quick wash). This group includes valves of the Performa 263, Magnum Cv F, Magnum IT F series.
2. The softener valve is five-cycle (operating mode, backwashing, chemical regeneration, direct washing, filling the regenerant tank). This group includes valves series 255, Performa 268, Performa Cv 278, Magnum Cv SN, Magnum IT SN.

Pentair control valves use different types of controllers:

1. With regeneration based on the results of time clock control. The frequency of regeneration is determined by the user, based on the quality of the water and the nature of water consumption. Regeneration cycles are fixed.
2. With regeneration based on the results of monitoring the volume of water passed through the filter (demand). A microprocessor connected to a turbine and a sensor calculates a schedule of water consumption by day of the week and schedules washing on the day when the filter’s loading resource is exhausted. Customizable regeneration cycles.

All control units are tested for operating pressure from 1.4 to 8.3 atm.

Interface type - LCD.

Optionally they can be equipped with electrolytic chlorine generators (art. 35626) for resin disinfection.