How to enter Windows 10 recovery. Windows System Restore

Due to the presence of viruses, driver or software mismatches, the OS may malfunction. If your Windows crashes, don’t rush to panic. The situation can be corrected by returning the state of files and programs to the moment when the PC was working properly.

While running OS Windows 7, 10 or 8, certain errors and problems may occur. As a result of such failures new launch operating system in operating mode becomes impossible. In this case, it is not at all necessary to do a time-consuming reinstallation of the OS. All you need to do is perform a system restore.

Recovering the OS using the recovery environment

When working we use the following scheme of actions:

Reboot the computer, press the F8 key while loading;
Troubleshooting;
System restore, selecting an OS restore point;
Click "Next" and again "Next";
Press the button "Ready", we reboot the system (in the Menu, select boot with the last successful configuration).

Windows 7 System Restore

There are several methods you can use to get your OS running again. Some of them rely on rolling back to saved settings. Others simply clear the data.

You can “reanimate” the OS in one of the following ways:

by selecting restore points;
using the command line;
through safe mode;
using a recovery environment;
using an image/boot disk.

Restoring the operating system using system “reanimation” checkpoints is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

Panel "Start";
"System Restore";
"Next";
"Select a restore point";
"Ready".

With such an operation, problems with the computer will be corrected, changes will be canceled and the system will be returned to the operating state that allowed the PC to boot normally. There is no loss of data, files and documents with this type of recovery. All data is saved. The operation is reversible. You can roll back the system to a previous computer state and use a different restore point.

Many people wonder how to make a recovery point on their own (manually) in order to choose it in the future? To do this in the same menu "Start" - "System Restore" You can create such a point yourself at any time convenient and suitable for you. It will be saved indicating the current date, which you just have to remember.

From restore point

In computer engineering there is such a thing as a recovery point. These are saved PC settings. As a rule, saving occurs automatically with each successful OS boot. Most easy way Windows 7 renewal is to use exactly this data.

Press F8 when your computer boots. This command will bring up a menu of system startup options. Next, you need to select the Last Known Good Configuration option.

Another method can be used. Go to the properties of the My Computer folder. Find the line System Protection, clicking on which will open the dialog box of the same name. Click Recovery – Next. We set a target date, indicate the disks that need to be fixed, and confirm the actions. After rebooting, the PC should work normally.

No restore points

You can fix problems with the OS even without restore points. To do this you will need to resort to the LiveCD program. You need to download it and burn it to a flash drive with the .iso extension.
Further all actions will take place in the BIOS. You need to configure booting from a flash drive. To do this, in the Boot section, select USB-HDD in the First boot device line.

Before proceeding directly with the recovery, copy all the necessary files to a removable disk. The LiveCD program provides a special menu for these purposes.

We will fix the system error using an archived copy. Connect the USB flash drive, open the Windows\System32\config\ folder. Files with the names default, sam, security, software, system must be moved to any other folder. In their place, transfer similar files from the RegBack folder and restart the computer.

The described method will only help if the problem is related to the registry.

Command line

You can resort to “reanimating” Windows 7 from the command line if the PC begins to freeze or works slowly, however, the system still boots. Enter the menu "Start" and using the right mouse button, launch the command prompt as administrator. Run the rstrui.exe command, which will open the system restore program. Click "Next". In the next window, select the desired rollback point and click again "Next". Once the process is complete, the PC should work normally.

There is another way to access the utility. Let's go to "Start". To open the command line, click "Run" and enter the CMD command. We click on the found CMD.exe file and wait for it to launch. Next, enter rstrui.exe in the command line and confirm the action with the Enter key on the keyboard.

It is not always possible to play it safe and create OS restore points in advance. Problems may arise that block the option of such “reanimation” of the PC. Then you can use another, no less effective and easy option- recovery Windows systems using the system itself.

We rely on the diagram:

Icon "My computer"- right mouse button "Properties";
"System protection";
In the new window click "System protection", recovery button;
"Next";
Select a restore point according to the date;
Specify the system disks to be restored;
We confirm the operations and reboot the system.

Restoring Windows 7 using Safe Mode

This method is preferred if the usual system boot is not possible. Then after pressing the PC power button on the system unit, hold down the F8 key to call "Start Menu". One of the "Menu" options is "Safe Mode". Select it and press Enter on the keyboard. As soon as Windows boots, we carry out the algorithm of actions that we described earlier.

System recovery Windows 8/8.1

If you managed to start the OS, you can resume Windows 8 via "Options". Hover over the top right corner and enter them. Click on "Change computer settings" – . Chapter "Recovery" will offer several options:

“Regular recovery with information preservation”.
“Deleting data and reinstalling the OS”.
"Special option".

Decide what exactly needs to be done. Next, follow the menu prompts.

If you choose the latter method, in the window that opens, click on the diagnostics item. You will be offered the following options:

"Restore";
"Return to original state";
"Advanced options". This item includes the ability to roll back to the desired resume point.

To resume Windows 8.1, press Win+R and call sysdm.cpl. In the system properties window in the tab "Protection" specify the required system drive. Click "Restore". Clicking "Next", you will be able to see a list of rollback points. Select the one you want and click "Search for affected programs". Changes that have been made to the PC since the selected moment will be deleted. Complete the process by clicking "Ready".

If you work with Windows 8, problems may occur, the Internet may not work correctly, etc. To fix this you can use in the classic way recovery via restore points.

Another option is a system rollback. To do this, open the menu "Start" - "Control Panel" - "Windows Update". Select an item "Removing updates". The same can be done using the command line.

So, in the list of updates that opens, we delete those from the moment of installation of which (we look by date) problems and malfunctions began. Delete unnecessary files and do a reboot.

You can perform a factory reset on Windows 8.1. Important files will not be affected during this operation. The method is effective, but to implement it, the OS needs to boot without problems. We use the algorithm:

Right side of the monitor - "Options";
"Changing settings";
"Update and Recovery" - "Recovery";
"Recovery without deleting files".

If you log in in the usual way You can’t, you need to use the disk with the system. Load the installation disk, select "System Restore". Press the button "Diagnostics", And "Restore".

Windows 10 System Restore

If you are having problems with Windows 10, press Windows + Pause. Go to "System protection" and press "Restore" – "Next". Select the desired indicator and click again "Next". When finished, click "Ready". The computer will automatically restart and the changes will take effect.

One of the advantages of the “ten” is the ability to return the settings to factory settings. This helps avoid having to install the system all over again. To reset your data go to "Computer Settings" – "Update and Security" – "Recovery" – "Return the computer to its original state". Click "Begin".

You can take care of the possibility of a rollback in case of failure in advance. You can create resume points yourself or configure their automatic creation at the desired frequency. To do this, in the settings, in the Update and security item, select Backup service. Specify where to save copies, click Add disk. After selecting the device, the function will be activated.

You can restore your Windows 10 system again by using restore points. In this case, the system will be rolled back to the moment when it loaded smoothly and worked without failures. This method recovery is described at the beginning of the article.

If the OS does not boot, a warning table with a key appears on the screen "Additional recovery options". Click it and select "Diagnostics" - "System Restore". We select a Windows restore point, wait for the system to roll back and reboot.

If such operations do not help and the computer continues to work incorrectly, you can roll back to the basic settings. Some programs and utilities, personal PC settings will be reset, and personal data will be deleted.

This technique is used extremely rarely if the other options described above do not help. The algorithm of actions is as follows:

"Start" - "Selecting parameters"- tab "Updates and Security";
Paragraph "Recovery"- button "Begin";
We choose to delete all files or keep some of them.

Recovering the system after this will take 40-90 minutes.

Resuming using the installation disc

One of the radical methods of fixing the error involves using an installation disk. After launching it in BIOS, click System Restore. In the Troubleshooting section, specify the desired action. Next, follow the system prompts to complete the process.

There is ongoing debate about what better than Windows 10 or Windows 7. This phenomenon is not accidental. Developers from Microsoft claim that there is nothing better than Windows 10, but experienced users say the opposite, they say the system is more reliable than Windows 7 now...

Computer freezing is a rather annoying problem. This can happen both at the stage of system startup and in the middle of its operation. Let's figure out why this can happen and what to do about it? Why does my computer freeze...

Sometimes, when installing programs or applications, a message appears on the computer screen stating that Windows 10 error 5 has occurred. This means that the user is denied access. This happens if there are several accounts in the system...

System image – full copy operating system, which includes not only the Windows 10 distribution, but also all applications installed by the user.

Creating and copying an OS image

The main advantage of the procedure for restoring an OS from its image is that the user practically does not risk losing his personal data.

Comment. Windows 10 is not immune to failures, so make a backup before starting a rollback important information to third party media.

To create a backup copy of the OS, the wbadmin console program is used. It is recommended to store a copy on any external drive(of course, it is possible to store it on the current disk, but this is not reliable) with enough space (7 GB will be enough).

Let's launch PowerShell. This can be done by searching on the device or by entering into the command line running as administrator ( prerequisite), utility names:

After pressing enter, “Command Prompt” will be replaced with “Windows PowerShell”:

If the owner sets out to carry out a full copy of Windows 10 with only system files and save the image on external media, then the following command is used:

-backupTarget:E: - the disk on which the user wants to place the copy;
-include:C: - storage location for Windows 10 operating system files

If you need to add third-party partitions or disks to the image, the command will take the form:

The duration of the procedure will depend on the amount of data copied to the system image. Duration is 20-30 minutes on an average PC.

After the utility completes its work, the WindowsImageBackup folder will appear in the root partition of the disk, where the image of the created system is stored.

Copy Windows from GUI

A small sub-item for those who do not know how to launch the console and enter commands.

Go to the control panel and look for the file history section. We wait until the system detects usable media and click “Backup system image”:

Restoring Windows 10 from its image

To restore the operating system, you need to complete two steps:

Write the created copy to a disk or flash drive;
In the BIOS, change the OS boot order so that when Windows startup 10 booted from a disk or flash drive (if you don’t like working with BIOS, then go to another section of the article)

The algorithm is as follows:

The automatic Windows 10 recovery process starts. We are waiting for it to complete.

Restoring Windows 10 without BIOS settings

You can roll back the system in the main graphical interface only if Windows 10 is fully loaded and operational.

If Windows stops loading, you can use standard utilities to restore correct operation.

One of the main nightmares of computer lovers is to encounter a situation where they cannot turn on the device. The operating system starts to load, but eventually displays a message like: “Windows updates could not be configured, changes are being discarded, do not turn off the computer.” After which nothing new happens - the software cannot be restored, and downloading stubbornly does not help. The best antivirus for Windows 10 The best antivirus for Windows 10 Viruses and all kinds of spyware are the most common causes of PC problems. Let's figure out how to defend ourselves. More details

System recovery tools

Before the release of Windows 7, this situation turned into numerous dances with a tambourine, and often a complete reinstallation of the operating system. Now everything is different, and often the problem is solved with standard tools from Microsoft, which do not even need to be specially installed. The task comes down to being aware, in principle, that such a toolkit exists, as well as simply remembering it when something “irreparable” suddenly happens.

The trick is that when you boot your computer, before the icons appear Windows boot, have time to get into the advanced parameters of this very boot, where you will be able to run diagnostics and, if necessary, restore the system to the selected checkpoint. In Windows 7, when booting, you had to press the F8 function key, and then select the “Troubleshoot” option (although in rare cases, the “Last Known Known Configuration” option saved the day).

More Windows 7 download options

Once in the “System Recovery Options” menu, in most cases one of the first two options became a salvation. “Startup Repair” could save the operating system automatically, and “System Restore” required you to manually select a checkpoint to which the rollback would be made.

Windows 7 System Recovery Options

Backup of Windows 10 Backup of Windows 10 To ensure that if the operating system malfunctions, you can restore it to its original state, you must make a recovery disk in advance. Read more Microsoft would be cheating on itself if it left everything with the update of its brainchild useful tools in the old way. Restoring the Windows 10 system is carried out by pressing the “hot keys” Shift + F8, and, unlike “seven”, you need to press this combination very, very quickly, since the operating system itself began to load much faster.

Windows 10 Boot Options

Has undergone changes and appearance saving menu. Having selected “Diagnostics”, in the “Advanced options” there are the already familiar “System Restore” and “Startup Repair” (only in a different order). There is also a “Return to previous build” option if you upgraded to “ten” from one of the previous versions of Windows.

Windows 10 Advanced Boot Options

If automatic recovery doesn't work

Restoring a Windows system to one of the previous checkpoints is not a difficult task. It is only important that these points themselves exist in the system, because sometimes users themselves manually disable their creation, at the same time deleting existing ones. It really makes sense to periodically clear old control points, since they take up a lot of space. But abandoning restore points completely is a risky endeavor. Secure Internet via DNS Secure Internet via DNS How to navigate the Internet without getting viruses? Secure DNS servers will help. Learn more To make sure that your restore points are automatically created or to make changes to the corresponding settings, you need to select the “Large icons” (or Small, but not Categories) icon display in the “Options” window and select the “Recovery” item. There, select “System recovery settings”, check whether protection is enabled and, if necessary, use the “Configure” button. Here you can manually create a point for subsequent recovery.

Recovery Windows computer 10

Windows 10 restore points

If we have restore points, then using the method described earlier, that is, using the built-in Windows system recovery tools, you can quickly roll back to an earlier state of the computer without losing important files.

Creating a Windows 10 recovery image

In extreme cases, you will have to restore the system to its original state or to a previously created system image. It is advisable to create a “System Image” and a “System Repair Disk” in a working state of the operating system, after you have installed all the applications you need. This is all done through the same “Control Panel” (aka “Settings”), when viewing by “Categories”, selecting “Backup and Restore (Windows 7)”. Here you can restore the operating system to a previously created image if the computer still boots, but has no longer worked as it should. Limiting Windows 10 tracking Limiting Windows 10 tracking With each release of the operating system, Microsoft requests more and more information from users. But you can moderate her appetites. More details

Restoring a laptop to factory settings

If standard tools do not help, and you do not have a disk or USB device with a recovery image, then laptop owners can use hot keys to launch the built-in recovery utility. Some models may even have a separate key for these purposes, for example, OneKey Recovery from Lenovo, but this is rather an exception. In other cases, it is important to know which one " hotkey» for your laptop, since it tends to differ among manufacturers.

Hotkeys for laptop manufacturers:

F3 – MSI; F4 – Samsung; F8 – Fujitsu Siemens; F8 - Toshiba; F9 - ASUS; F10 - Sony VAIO; F10 - Packard Bell; F11 - HP Pavilion; F11 - LG; F11 - Lenovo ThinkPad; Alt+F10 - Acer (before this select in BIOS - Disk-to-Disk (D2D)); Ctrl+F11 - Dell Inspiron; Hold - Rover.

Factory Utility will restore the device to its original condition, as if it had just come from the store. This will delete all programs with settings, all files, including favorite photos, which it makes sense to store in cloud services just for such cases. However, the device will be able to work again, and in some cases this method will simply help prepare the laptop for subsequent resale or transfer to relatives.

pcgramota.ru

Five Windows 10 System Recovery Methods (Step-by-Step Guides)

Windows 10, like earlier operating systems, may be susceptible, for example, to virus attacks or system errors. In this regard, specialists from Microsoft have provided their Windows 10 with special built-in functions so that you can quickly restore the operating system, allowing you to effectively return it to a working state. Among these tools, the new product contains, as well as methods that have already been tested over the years, for resuscitating the OS, for example, using a pre-created recovery point or recording an image of the entire OS on an external drive, but also some improved methods have been introduced, such as creating a USB specifically for the possibility of recovery.

This article describes in detail five methods for Windows 10 to quickly restore it when system failures occur. The first three methods should be used when not particularly difficult situations arise, and the last two will effectively help even in cases where it is impossible to boot the system. The option of a clean installation of the system will not be considered here, since it already refers to cardinal methods and even in its essence can no longer be called a recovery method, since the OS will be installed “from scratch” (with formatting the system partition of the hard drive) .

Method 1: Using a recovery point

It is envisaged that in automatic mode, Windows 10, like its previous versions, creates points at certain intervals for the possibility of its recovery. But at any time the user can always save such a point in manual mode. For example, before making any important adjustments to the system or before installing applications and special software.

The main advantage of method 1 is that after the procedure, all information on the user’s computer is saved and will only be deleted software installed after the restore point date.

If the user is interested in the question: “How to restore the OS using 1 method?”, then the algorithm of actions is as follows:

Method 2: Restore to factory state

The Ten has added a feature that allows you to return your PC to factory settings. This method provides the ability to perform a total system rollback or without affecting the personal information of the owner stored on the computer.

How to restore the OS using the reset function? To do this, you need to perform the following sequential steps:

Method 3: Using the file backup function

In Windows 10, there is a convenient “File History” function, with which the user can independently or by setting automatic execution in the settings, create backup copies of information stored on the PC. To do this, you just need to enable this setting and show what exactly needs to be reserved. The time interval after which copies of files should be created is specified in the settings. This, in the event of failures or errors in the OS, will allow you to quickly and without investing much effort, return your information and resume full-fledged work with them.

Method 4: through creating a USB disk

In cases where the OS does not start at all, the first three methods will not help. In this case, you will already need to use a recovery disk that allows you to use additional features downloads.

The algorithm of actions consists of the following stages:

Method 5: Using bootable media with Windows 10

If you do not have a previously created recovery disk and if you cannot boot your PC, you will need to use bootable media with Windows 10 to restore the system. Bootable (installation) media is created on a USB flash drive or DVD.

The sequence of steps performed is as follows:

WindowsTune.ru

Windows 10 System Restore

1 Create a photo
2 Restoring
3 If it doesn't load

Windows 10 is under continuous testing. This means that errors appear periodically. It’s no wonder that restoring Windows 10 in such conditions is necessary process. Problems arise due to updates being implemented by developers. After all, this whole bunch of applications and equipment that exist on the market must be adapted to the requirements of the new operating system.

Create a photo

You can imagine that returning the computer to its previous state is a time jump. Windows 10, in spite of our desire, automatically photographs its configuration. Such memory fragments have important files and drivers in running versions. So, it is very important for Windows 10 to take a photo of itself before installing any software. The user can do this operation independently.

To do this, click on the Start menu and select Control Panel.

After this, you need to click on System.

Go to a new window and click on System Protection.

We check such a parameter as the partition for which Windows 10 recovery is enabled. Place the cursor on this partition, select it and click Configure.

In the next window you need to check the box next to Enable system protection. It is recommended to allocate around 15% to store all our recovery points. Next you need to click OK.

Having realized that the recovery point is being created on drive C, we begin this process.

We restore

So, let's say something bad happened. For example, a virus got onto your computer or a new program greatly affected its operation. In this case, a rollback to previous snapshots is used.

Click the Restore button in the System Properties window.

See also: What's the catch in upgrading to Windows 10

Windows 10 will then prompt us to select any snapshot. For example, we can choose the one we created ourselves.

If it doesn't load

And if everything is really bad, and Windows 10 doesn’t even boot, then you can try to restore it by first inserting boot disk. Such a disc can be created on the basis of DVD media. For this purpose, regular Windows tools will help us.

Click the Start button.
Then select Control Panel.
Next, click on System and its maintenance.
Then select Backup and Restore.

On the left side of this window there will be a command to Create a system repair disk. You just need to follow the instructions. Naturally, such operations must be done first, even before fatal problems with the computer begin. Once you have created a disk, you need to use it wisely.

Insert the disc into the DVD drive of the sick computer.
We reboot the machine using a special button on the case.
If boot from disk is not set, then go to the BIOS and display boot from DVD up in the Boot menu.
In the loaded menu, you need to select the recovery option and click Next.

That's all, as you can see, there is nothing to be afraid of computer failures. There are both automatic saves and manual methods for archiving the entire work of the software. If you do everything correctly, then you just need to click a few buttons a couple of times and roll back to a working version of Windows 10. Windows 10 recovery will always save us.

(Visited 1,924 times, 1 visits today)

windowsprofi.ru

Windows 10 Recovery

Let's try to restore Windows 10 and deal with the many options in order of increasing complexity. Actually, they have a lot in common: in all cases, without exception, except for a full restore of Windows 10, we will need a backup copy.

To begin with, the most important files and documents, and ideally the entire system drive... To ensure the reliability of the system, you and I need to secure the most important drive - the first, system drive, as well as our user information, that is, documents. Restoring Windows 10 can be done in several ways:

Resetting your computer to its original state
Using File History
Using restore points
From the system image
Using a recovery disk

How to restore Windows 10 to its original state

The first thing you need to pay attention to when you want to restore Windows 10 to its original state is the “Restore” function. To do this, open Settings >> Update & Security >> Recovery and click the "Start" button.

Here we are offered two options. Restore the computer to its original state. “Reset” the system by deleting all installed programs, with or without saving personal files. This last resort should only be used in emergencies... and if you have a backup copy of all valuable information.

Special download options. Finally, other system recovery operations can be performed by rebooting the computer in a special “recovery” mode - we will return to this later.

The last item in this menu offers a clean Windows installation by using new program Refresh is the same reset, only with the subsequent reinstallation of Windows 10 from the “distribution” automatically downloaded from the network. We will use this method only in cases where a regular “reset” is impossible.

In both cases, first take care of backing up your documents and photos - unless, of course, they are stored in the “cloud”, as I advised you, or on a separate disk. Remember: a system reset only affects the main, system drive; all other drives in your system remain safe.

Recovery disk

If the computer refuses to start, then the installation disk or recovery disk that we created earlier will come to our aid. See: How to create a Windows 10 recovery drive. To start from removable media, you need to make some settings. We need to use the boot menu to boot from the USB Flash Disk, only then will we be able to boot from the recovery disk.

Once in the recovery environment, you will be faced with multiple tasks to restore the system, even rolling back to the initial state if other methods do not help.

Windows 10 Recovery Mode

You can roll back to a previous “restore point” even if the computer does not boot at all. In such cases, after several boot failures, the computer automatically boots into a special Windows 10 recovery mode, from where you can “get to the bottom” of any saved “snapshot”.

How to start recovery mode? Restart your computer and use special commands: Settings >> Update and Recovery >> Recovery >> Special boot options. If you see this picture after restarting your computer, you can first try clicking on the first item and continue loading as usual. If this does not work, we have a direct path to the Troubleshooting section.

In this menu we will find many useful commands that will help us in case of failure. For example, loading in Safe Mode, with a minimum of commands and add-ons. In Safe Mode you will have to make do with only standard drivers and programs... but that's what we need! This mode can be used if the system freezes at the very last stage of boot, after the logo appears and disappears from the screen. Most often, this happens due to problems with drivers or some programs in the Startup Menu - they will not start in safe mode, so you can, with some experience, catch and remove them. But the most important section with recovery tools will open to you when you press the F10 key.

This gives us access to download management, an incredibly powerful tool that will come to your aid if various kinds errors. Here the system will prompt you to “reset” to the state clean system- either preserving your personal files and settings, or completely. Of course, this method is too radical for simple failures - it will correct errors, that’s certain, but it will casually destroy all programs installed on the computer. Well, let’s leave this recipe for the most extreme case and click on the link Additionally: there’s another one in store for us "first aid kit".

This is much more interesting: first, we can try to fix boot problems (if there are any) - the Startup Repair tool will help us with this. It does not affect our personal data or installed programs, checking the integrity of system files and a number of drivers. Alas, this repairman will not help us with the most severe failures, but it’s worth at least trying.

The Windows 10 System Restore tool will allow you to roll back to a saved “restore point” (we’ll talk about them below). Let me remind you that such “points” with a snapshot of the registry and other important system files are created automatically when installing new programs... But you can do this manually - say, some potentially dangerous software.

Finally, the Boot Options menu will allow you to reboot in "safe mode" without running most device drivers and programs from the startup list. This can help you with problems with video card drivers or antivirus: potentially, they are the ones that most often “freeze” the system at startup.

As you can see, the Boot Menu is powerful enough to fix most problems with Windows 10 - although I sincerely hope you never have to see it on your screen.

And at the same time, I’ll remind you of my favorite method of resurrecting a system from the dead during the most severe failures, up to complete failure hard drive- recovery from an image, a backup saved on another hard drive (preferably an external one). I’ll say right away that Windows itself can create such “images,” and it’s not for nothing that the Image Recovery command is included in the boot menu. But this is exactly the case when you should, without hesitation, choose a separate program for this work, be it the free Rescue Kit on Paragon or the talented in all respects, but hopelessly paid Acronis True Image.

Restoring Windows 10 from a system image

If we have a copy of the system image, then when the time comes to restore Windows 10 from the image, it will not be difficult and we can restore the computer in a few minutes and at the same time we will not have to install all the programs. In order to restore the system partition from an image, you need to start the computer in the recovery environment: Settings >> Update and Recovery >> Recovery >> Special boot options.

After entering your account password, you will need to select the image from which the system distribution will be restored.

After simple manipulations, the system will warn: All data on the restored disks will be replaced with data from the system image. Click "Yes" and wait for the process to complete. After restarting the computer, you will see that the system looks the same as you did when you created the image. See article: How to create Windows image 10.

Restore point

Creating "restore points", that is, backup copies of configuration files and important system files. They take up little space, but will allow you to revive the system in the vast majority of cases. Windows periodically (usually when installing new programs) creates snapshots of the system state. And if you have several such “points” at your disposal, you can return the system “back to the past.” And not until the birth of life on your computer, but just a day or two ago, until the “glitch” appeared.

To do this, we need to head to the old System Restore menu in Control Panel (System and Security section) - you already know that the easiest way to get to it is by typing the word “Recovery” in the search bar.

Click on the line “Run system restore” - a “calendar” will open in front of us, which will list all the restore points. And at the same time - the programs before the installation of which they were created. And if you know for sure that your system was “ruined” by a video card driver, you can simply find its name in the list and roll back to the date before its installation.

One subtlety: by default, the “restore point” system in Windows 10 is disabled. And if you are going to use it, then the first time you start a computer with a “fresh” system, you need to turn it on and configure it. This is done in the System Recovery Settings menu: note that it is enabled separately for each disk on your computer (if you have several of them on your computer, I recommend limiting it to the system one only). In addition, you can configure the amount of disk space allocated for storing “points” - the more space you allocate, the more “points” the system can save.

Using the same menu, you can create a Restore Point manually (although the configuration is automatically “backed up” by the system after installing important updates or programs, so you have to resort to this operation less and less often). See article: Restore Point in Windows 10

The Windows 10 recovery procedure is reversible: in case of failure, you can easily return the system to its previous state

Using File History

It is better to store documents and photos in the “cloud” from the very beginning, that is, not in folders on the Desktop, as we are used to, but in storage devices such as Dropbox or OneDrive (if this is more convenient for you, create a “shortcut” for these folders on the Desktop) . See How to use cloud storage.

If you don’t trust the Network, store them in special Documents folders, and enable OneDrive Backup in the system settings, and if you have a separate drive (for example, an external USB hard drive), use Backup using File History.

Unfortunately, this method only protects your information, but not system files; it will not help restore Windows 10 after a failure.

If your Windows 10 suddenly stops working, don't worry - there are many ways to restore it. For example, a rollback to a previous state, a restore checkpoint, or creating a mirror of the system and saving it on external media, followed by restoration via bootable USB (this option in Ten works much better than in previous versions). Below we will look at all existing options for restoring the Windows 10 system and find out what errors most often occur when it starts.

To successfully restore, you need to understand how one or another option works. First you should try running Windows in . Using it, you can perform a “clean” boot, without activating additional drivers and software. A failure can occur not only in Windows itself. Most likely, this is an error with a driver installed later, or with some application. If safe mode does not solve the problem, you can proceed directly to recovery.

This feature recently appeared in Windows 10 and has already proven itself well. This is something similar to a hard reset on Android smartphones (Windows returns to factory settings). You can start the process in several ways:

Click on the notifications icon and click on the “All settings” tile.

Click on the “Update and Security” tile.

In order to return Windows 10 to factory settings, click on the “Restore” entry, and on the right side, click on the “Start” button.

There is another opportunity to get into this menu, we’ll talk about it below. There we will also tell you what to do if Windows 10 does not start and you cannot get into the rollback settings. Once the “Start” button is clicked, you will be offered two options to reset Windows 10. You can return the system to its original state and still keep all user data, or permanently delete everything and reinstall the OS completely.

You can get into this mode even without logging in. To do this, on the Windows login screen, hold down the Shift button and restart the PC.

A menu will appear in which we need to select the item indicated in the screenshot.

All that remains is to click “Return the computer to its original state.”

On the next screen we will again be offered the choice of saving or deleting user data.

After this, our system will reboot and the recovery process will begin.

We just need to wait until Windows prepares all the necessary files.

Once again we will be asked to choose a recovery option: we will do a “clean” reinstallation, so click “Just delete my files.”

“Ten” will notify you that all data will be deleted. We agree and click on “Return to original state”.

The recovery procedure may take a long time. Sometimes many times more than if we reinstalled the system from a flash drive. By the way, you can read about how to do this.

After clicking the “Clear” button, the installation of Windows 10 will begin.

We select the location we need.

We decide on the system language.

We agree to the Microsoft license and click the “Accept” button.

Select the type of use of the system.

Select the authorization method. Can be used account Microsoft, register it or sign in to your local account.

Once the process is complete, the computer will be returned to its original state. In other words, it will be as if only after installing the operating system. In some cases, you may need to install drivers.

The advantages of automatic system recovery include the ease of use of the tool and the absence of the need to have bootable media.

On laptops and computers that had Windows 10 pre-installed, returning to its original state involves installing all the necessary drivers (there is a special partition for storing them on the disk).

Using a recovery disk

A recovery disk is a medium that contains all the necessary data for reincarnation or complete recovery of the OS and system files. Let's look at the algorithm for creating a Windows 10 recovery disk. Below are step-by-step instructions with screenshots. Let's begin.

Open the system parameters using the search tool. It is located on the left side of the taskbar. Enter the name in the search field.

In the search bar of Windows settings, write the word “Disk” and select the tool we need in the search results.

If, when creating a disk, we check the box next to the item marked in the screenshot, in the future we can not only fix the OS, but also reinstall it again, copying all user data.

Select the disk on which the recovery image will be written and click “Next”.

Windows will notify us that all files on the flash drive will be deleted. We agree and click “Create”.

After automatic recovery preparation is completed, disk creation will begin. The process may take quite a bit of your time.

Using our recovery disk you can:

restore the previous state of the computer from a backup copy;
use the rollback to restore point mode;
apply automatic recovery mode at system startup;
use command line;
implement full recovery Windows 10 from an image.

The drive, the creation of which we described, is even more convenient than a simple installation flash drive. After all, using the latter, you need to configure Windows 10 every time, and a system restored from a copy requires virtually no configuration and is immediately ready to work.

Rollback the OS using a full image

Ten has the ability to perform a complete backup of the entire system. Below we will look at how to create an image and how to restore the OS from it, for example, after failures that occurred due to the fact that the computer was not started correctly. Each stage step by step instructions For clarity, it will be accompanied by a screenshot.

This option differs from the one described above in that we create a complete snapshot of the existing operating system with drivers, user files, etc. Using this image, you can restore the system and immediately start using it - you don’t have to do any additional actions. It is best to make backups as soon as the system is installed, configured and generally up to date. working condition. But in no case when it is already starting to slow down due to clutter.

Let's start creating a complete image of the existing Windows 10:

Open the control panel using Windows search (click the magnifying glass icon, enter a search query and click on the result).

In the search field of the control panel, write “File history” and click on the result.

Now on the left bottom corner Click on the inscription indicated in the screenshot.

Go to “Create a system image”.

Now you can proceed directly to creating the image. There are three options for saving it. We can burn a backup to a hard drive, split it into several DVDs, or specify a target network folder. Let's use the first option. Click on “Next”.

Let’s get down to business – click on “Archive”. The system tells us that this may require around 46GB.

The creation of the archive has begun. Depending on the amount of data and PC performance, it may take different times.

When the backup is complete, you will see the following window. Click “Close”.

In the future, the system can be restored from this image. To do this, when installing the OS from a flash drive or disk, select the recovery mode and specify the image created above. The system will unpack the archive to drive C and will be ready for use. This is much more convenient, if only because the OS no longer needs to be configured, drivers and software installed: you just sit down and start having fun or working.

How to create a restore point in Windows 10

Restore points in version 10 of Microsoft's OS work exactly the same as in versions 7 and 8. With their help, you can return the system to a specified point in its life and fix the problem that arose after the checkpoint was created. In order for us to roll back the system to a restore point, we need to enable their creation. We do the following:

Go to the control panel (we described how to do this in Windows 10 above). Next, write “Recovery” in the search bar and click on the result indicated in the screenshot.

In the next window, click “System Recovery Settings”.

In our case, automatic creation of rollback points is disabled. Let's fix this - select "Customize".

Activate the automatic creation of control points and click “OK”.

Now, whenever you change Windows settings, recovery checkpoints will be created automatically. You can also make manual checkpoints here - this is necessary before any serious step, for example, installing a suspicious program.

When you need to apply one of the points and fix the system, go to the control panel, namely “Run System Restore,” and restore the copy. If Windows does not start, there is another option. Boot from the installation flash drive or disk and select system recovery mode there.

Restoring the bootloader using the command line

Despite the fact that working with the command line is a method more intended for professionals, each of you can use it. The main thing is to follow our instructions exactly.

Initially, install the bootable media into the PC slot and boot from it. In the window that appears, click the item indicated in the screenshot.

Next, click on the tile called “Troubleshooting.”

Select “Command Line”.

Now you can run the utility to restore the master boot record. To do this, enter the command bootrec.exe C:\Windows into the black screen (specify the drive letter on which your system is installed) and press Enter.

The system will inform us that the disks were successfully created - the master boot record has been restored.

Comment. For proper operation with operators you need to know the name of the disks installed in the system. Such names are individual and in most cases do not coincide.

Registry recovery

The operating system registry is periodically saved in the directory indicated in the screenshot.

To create a copy of the registry, copy these files and save them. You can restore data by moving it back and replacing it. Naturally, to do this you need to have administrator rights.

Error 0x80070091 during system restore

Users are increasingly asking why error 0x80070091 occurs when working with restore points. This is due to a system update and will be fixed later with the next patch. You won't be able to fix the error yourself.

Let's sum it up

Now we know how to roll back Windows 10 and perform an advanced recovery. There are many options for this and they are all effective. At correct use they are enough to fix any problem in the operation or startup of the operating system. There are also additional programs, capable of resetting Windows 10 to factory settings, for example, Aomei OneKey Recovery. This can be the same Acronis or a backup image provided by the computer or laptop manufacturer. But you shouldn’t discount the tools in Windows 10 – their functionality is enough to solve any problem.

Very often, Windows 10 OS stops working at the most inopportune moment. Don’t panic and immediately call a technician to your home, because the reasons for the system’s inoperability can be very different.

There are a large number of different options for starting Windows 10. Among them, the most notable are rolling back the system to its original state, creating a mirror of the OS and saving it to a flash drive or disk with further recovery via USB, and also using a recovery checkpoint.

To use one or another method of correcting recovery errors, you need to qualify them by a code that indicates the cause of their occurrence and possible option solutions.

Windows 10 System Restore Error 0x80070091

As a rule, this error occurs due to the deletion of the system directory in which files for managing certain programs are located. Users, out of ignorance of the system, often delete or try to delete the Program Files\WindowsApps folder, after which an error message with code 0x80070091 appears on the computer screen. This error may also occur after installing update KB3213986. It is recommended to remove it.

Error resolution options:

You need to check the disk. To do this you need to go to "My computer" and right-click on local drive C ( "Properties"). Next - in a new window in the tab "Service" you need to click on "Check". After which you need to reboot the OS and start recovery.
You can also rename and delete the WindowsApps folder. We are launching Command Line (Administrator) and enter the command TAKEOWN /F "C:\Program Files\WindowsApps" /R /D Y

After the system grants rights to the folder, you need to go to the tab "View" in Explorer. It needs to be set to display hidden files and folders. After downloading the portable version of the Unlocker program, you need to go to the path C:\Program Files\WindowsApps and rename the folder to WindowsApps.old. Next, click on “Rename” - enter a new name and "Ok" and "Unlock All". Reboot the system and run recovery.

Windows 10 System Restore Error 0x80070005

This error may occur during system recovery due to security features antivirus program. You can try to disable self-defense in the antivirus settings or completely remove it.

You can also follow these steps:

Checking for overflow local disks PC.
Performing a selective system startup. Press Win+R and enter the command msconfig – In a new window in "General" enable selective or diagnostic startup (don't forget to disable startup).

You can also check the connection of the Volume Shadow Copy service or reset the repository.

System Restore Error 0x81000203 Windows 10

Error code 0x81000203 can be fixed by starting the service "Microsoft Software Shadow Copy Provider". If the problem continues to occur, try the following steps one by one:

Disable mode Turbo in the TuneUP Utilities program.
Scanning the registry with the Kerish Doctor 2013 4.50 utility.
Check the integrity of system files by entering the sfc /scannow command.

Windows 10 System Restore Error 0x81000202

This error occurs when opening the menu "System Properties". To fix it, there are 2 options:

Use the system anti-virus utility to check your computer for viruses and malware.
Launch Command line as Administrator and enter the command sfc /scannow in its console to scan the integrity of system files and eliminate this error.

System restore error on Acer laptop

If a restore error occurs in Windows 10 OS on an Acer laptop, then you need to perform a system reset to factory settings using the built-in tool.

This action is carried out as follows:

On an Acer laptop, press Alt+F10.
To launch the utility, you need to enter the recovery password – 000000.

It is worth considering that when installing the system, “Quick Start” is activated in automatic mode. To produce further actions you need to disable it in the BIOS.

Windows 10 on an Acer laptop provides the ability to save user data.

After all the manipulations, you need to reboot the computer device for the OS reinstallation to begin.

If you receive various errors when restoring the Windows 10 system, you must definitely scan the entire system for functionality - RAM, hard drive, registry folders, drivers and other computer elements. In most cases, the causes of problems are the incorrect closing of some programs, the entry of various viruses, Trojans and malware into the system.

You can solve these problems yourself without contacting service center. If a more complex system failure occurs, then naturally you cannot do without the help of a computer specialist. Otherwise, you risk bringing your computer's OS into a deplorable state, in which its restoration is not always successful.

Users who have Windows 10 installed on their PC sometimes experience operational problems and receive Update Center errors. The reasons for these problems can be very different - from the system disk being clogged with temporary files...

Any critical errors in Windows 10 are a direct “knife in the heart” of the user of the operating system. By the way, for OS creators this is a profitable business. So they lure cash, and officially. At the same time, any of you can...