Windows 10 launch option.

It is no secret that failure situations often arise when, in order to restore system functionality or carry out some diagnostic measures, it may be necessary to use the so-called Safe Mode. Let's see how to enable it on Windows 10 on a laptop or computer. It’s worth immediately taking into account that the technique described below is radically different from everything that was in old systems.

How to enable on Windows 10: basic methods

As it turned out, the new “top ten” introduced quite a lot of innovations that, to put it mildly, many users did not like. It was also possible to interfere with the operation of the system bootloader in safe mode. The fact is that the classic old-fashioned method of pressing the F8 key at startup does not work here. It is unclear why they abandoned it. However, the question is how to enable safe mode on Windows 10, has several interesting solutions, compared to older methods.

IN in this case We're talking about using system configuration settings, keyboard shortcuts and commands, system recovery, and even changing the corresponding settings in the updated Control Panel. But first things first.

How to enable safe mode on Windows 10 at boot: MSConfig utility

First, let's look at universal method using the settings called up from the “Run” menu with the msconfig command.

In the settings window that opens, go to the download tab. The download options will be shown below. Here you just need to check the box next to the line indicating safe mode, then save the changes and reboot the system.

You should immediately note that this method is good for solving the problem of how to enable safe mode (on Windows 10) when turning on a computer or laptop. There is some inconvenience here only due to the fact that every time you start the system will always boot in safe mode. If it is not needed, you will have to disable it in the same way.

Using specific keyboard shortcuts and commands

Another interesting solution to the problem is how to enable safe mode on Windows 10, which involves rebooting while holding down the Shift key. The only thing worth considering here is that this technique is also suitable if you select safe mode in the login window.

To begin, select the shutdown section from the Start menu, but stop at the reboot line. Hold down the Shift key and click on the reboot command, after which in the new dialog box we go to Troubleshoot and select first Advanced Options, then Boot Settings. And finally, click on the Restart button.

After restarting, a window will appear on the screen indicating 9 options for booting the system, including safe mode.

Enabling Safe Mode from Control Panel

Now let's see how to enable Safe Mode on Windows 10 using the Control Panel.

Here you should go to the settings section and then go to the update and security menu. Here we use the advanced launch options and press the restart button. Further actions are completely similar to the previous option.

Managing Safe Mode from the Command Line

One more in a great way A way to solve the problem of how to enable safe mode (on Windows 10) is to use the command line, called through the “Run” menu by entering the cmd combination. In the window that appears, enter the following combination:

After successful completion of the operation, you need to reboot the system (preferably from here):

Again, it will be installed on a permanent basis. You can return the bootloader to its original state in the same way as in version 8:

By the way, if the user has problems loading the system as such, you can use this combination:

It is also relevant for starting safe mode during system recovery.

Starting from recovery mode

In this mode, you will need a boot disk or flash drive. We boot from removable media, go through the stage of selecting language and regional standards, and in the window with the installation offer at the bottom in the left corner, select recovery.

Now go to the diagnostics section, select additional parameters, and then the command line, in which we enter the command indicated above, the very last one. After reporting the successful completion of the process, we return to the original menu and use the continuation line. After this, the computer or laptop will reboot automatically, and the familiar window with nine boot options will appear on the screen.

How to return to normal startup

But that's not all. When considering how to enable Safe Mode (on Windows 10), you cannot ignore returning to the normal boot mode using the F8 key. This is done simply. In a regular command line you need to write:

A painfully familiar classic window will be displayed on the screen with a corresponding menu of boot options. But this solution is mainly intended exclusively for those users who, due to some circumstances or habits, cannot switch to innovations, although, as practice shows, in general, this is not so difficult to do (if there was a desire).

Bottom line

As you can see, although the “ten” has a large number of innovations, there are many more options for enabling safe mode. Well, which one to choose depends on each specific case when you need to perform a certain action.

If we approach these issues, so to speak, from a practical point of view, the most likely solution is a one-time launch of such a mode, for example, when restoring with booting from removable media. And it’s true, well, you won’t use it all the time, because it takes more time when the system starts. In general, the use of Safe Start is recommended only in cases where problems or failures are observed.

Please note that when choosing the option to boot from a recovery disk or flash drive, re-installation of Windows is not required (you can simply skip it). As for the other methods, you can use them or leave them. However, information about available methods there won't be any extra. However, as they say, you can get used to everything.

Safe Mode Windows operation 10 is used to troubleshoot various problems. It starts when the system is unstable, during virus removal, or when installing new drivers. This mode will allow you to find out the reason for the blue screen of death.

How to enter safe mode?

Before the release of Windows 8, entering safe mode was possible by pressing the F8 key on the keyboard during a system reboot. But in new versions there are several options for enabling this mode.

Using the Msconfig utility

Press Win+R to open the Run window:

Run –> msconfig –> System Configuration –> Boot

Important! If you check the “Safe Mode” checkbox, the system will begin to boot constantly only in this state. To establish a standard boot, go to “System Configuration” again and uncheck the box, then restart the PC.

Video

For more information on how to exit safe mode on a Windows 10 computer, watch the video.

From the Command Line

Launch Command Prompt with System Administrator rights. Run the command: bcdedit /copy (current) safeboot minimal .
Restart your computer. It can be done in a standard way, or from the Command Line using the command: Shutdown –f –r –t 0 . After this, Windows 10 will always boot in Safe Mode.

Healthy! In order for the startup method selection dialog to appear during a reboot, you need to enter the command in the Command Line: bcdedit /set (default) bootmenupolicy legacy. To return to standard boot, type bcdedit /set (default) bootmenupolicy standard .

While the computer is restarting

Using a boot disk/flash drive

This method is used if Windows 10 does not start on the computer at all. Create a boot disk or flash drive on another device, then follow all the steps that you do when reinstalling the operating system. In the language options window, click Next.

In the next dialog box, run System Restore. After that, follow the path:

Enter the command: bcdedit /set (default) safeboot minimal . Once completed, close the Command Prompt and click Continue. The computer will automatically restart in Safe Mode.

Conclusion

To increase the startup speed of Windows 10, the ability to enter safe mode while restarting the PC is disabled. You can enable the function in several ways, as described above and shown in the video. According to the editors, best option– using the Msconfig utility.

The developers of Windows 10 have provided for system recovery processes to take place automatically, but they still retain the ability to enter safe mode. However, familiar to more earlier versions The Windows OS login method using the “F8” key no longer works in Windows 10.

How to activate a familiar function? What keys and buttons should I press when loading the OS to start in safe mode? Below is detailed description in various ways For Windows boot 10 in safe mode.

Enable Windows 10 to boot in safe mode via msconfig.

To do this you need:

Press the key combination “WIN” + “R”;
In the text area, enter the command - “msconfig”;
Confirm by clicking “OK”;
Then in the menu that appears, open the “Download” tab;
Select the operating system with a single click of the left mouse button and check the box in the “Safe Mode” column;
Also in this window, the user can select OS boot modes; it is recommended to leave the “Minimal” checkbox by default;
Click “Ok”;
Ready. After restarting, Windows 10 should boot into Safe Mode.

Note: To start Windows in normal mode, you need to uncheck the “Safe Mode” box using the same instructions.

This may seem strange to experienced users, but it is very important not to confuse Safe Mode with and be aware of the differences.

Logging into Windows 10 in Safe Mode - Settings.

To restart Windows and open it in safe mode, you need to change the startup options. To do this you need:

Go to the Start menu;
Click “Options”;
Next, in the window that appears, go to the “Update and Security” tab;
Then in the menu that appears, open the “Recovery” tab;
Click the “Restart Now” button;
After that, click “Diagnostics”;
Click “Advanced options”;
Next, enter the “Download Options” menu;
Click “Reboot”;
Wait for the menu of additional options for starting the computer to appear on the monitor and, having highlighted the appropriate boot method, click on “Enter”;

Logging in safe mode allows you to solve many problems, such as when or you need to change tables, etc.

Reboot+Shift starts Windows 10 in safe mode.

The algorithm of actions consists of several successive stages:

Enter the “Shutdown” window through the “Start” button;
Next, hold down “Shift” and click “Reboot”;
Then, using the previous instructions, restart the PC.

But all these methods work when you can log into Windows 10 and it starts up successfully. What should you do if problems, such as others, occur when logging in? Let's look below.

Login to Safe Mode if Windows 10 won't start at all.

If all the above methods do not help, then you need to use the system's removable installation media, boot disk or USB flash drive.

Algorithm of actions in this situation:

Boot from a disk or flash drive by changing the startup settings in the BIOS;
After downloading, select the “System Restore” section;
Next, go to the “Diagnostics” section;
Enter the “Additional parameters” subsection;
Click “Command Line”;
In the console that appears, type bcdedit /set (globalsettings) advancedoptions true
Press the “Enter” and “Continue” keys;
Wait for the menu of additional startup options to appear on the monitor and select safe mode;

For recovery standard version To launch, you will need to call the context menu “Start” - “Command Line” and enter the command:

Bcdedit /deletevalue (globalsettings)advancedoptions

When you restart, Windows 10 will work normally.

Here are some simple ways to start Windows 10 in safe mode. If you have anything to add, leave comments below.

In Windows 10, they removed the method that allows you to select a login mode when you hold down the F8 key when turning on the computer. But there are other options that make it possible to enter the lightweight mode both with and without access to the system.

Why use Safe Mode

Safe mode (SA) differs from normal mode in that when you log into the system, auto-starting programs, some system processes and drivers are not loaded through it.

Thanks to this, you can, firstly, avoid problems caused by errors in drivers, processes or applications, fix them and proceed to work as usual.

Secondly, BR is used to troubleshoot problems with everything that can break in the computer, since while working in BR, most processes are disabled and do not cause conflicts. For example, it is more convenient to rid your computer of viruses, blue screens, errors in programs and drivers, as well as reset your password and configure account administrator.

There are three BR options: standard safe mode, as well as two additional ones with loading network drivers or the command line. In the latter cases, by booting into a special mode, you will be able to work with the Internet and all programs that require a network connection, since all the elements necessary to set up an Internet connection are added to the list of loaded processes and drivers.

Putting your computer in light mode

There are several ways to switch to BR from the regular one or enter the special mode immediately without logging in to the regular one. The second option may be useful if the system is so faulty that it does not boot or freezes severely, so you must immediately turn on the computer in the BR.

Using system configuration

Expand the “Run” window through the system search bar or the Win + R combination.
Open the Run program
Enter the msconfig command.
Run the msconfig command
In the window that opens, go to the “Boot” tab and check the box next to the “Safe Mode” line. Here you can choose one of three options downloads: minimal - the most common BR, another shell - includes the ability to work with the command line, network - includes the ability to work with the network. Select one of the items and reboot the system; when you turn it on, it will automatically enter you into the BR.
Activate safe mode

Using System Restore

You can also enter safe mode through the system recovery option:

Expand PC settings.
Open computer settings
Select the "Update and Security" block.
Select the “Update and Security” block
Go to the “Recovery” subsection and click on the “Restart now” function.
Click the “Restart now” button in the “Special boot options” block
When the system reboots, a list of possible options will open. Select one of the modes using the keypad (numbers 4–6).
Select one of the safe modes

From the lock screen

The lock screen or login screen appears at the moment when you need to select an account and enter a password, if one is set, when you turn on the computer or wake up from sleep mode. You can go to the BR directly from this screen:

Click on the Power icon on the right bottom corner, hold down the Shift key on your keyboard and then select the “Reboot” function. When the system starts to turn on again, a list will appear on the screen special ways entrance.
Hold down the Shift key and click on the “Restart” button
Go to the “Diagnostics” block.
Go to the “Diagnostics” section
Open advanced options.
Open the “Advanced Settings” section
And the last transition is loading methods.
Click on the “Download method” section
Select one of the BR items by pressing keys 4 to 6 on the keyboard.
Selecting recovery mode

By restarting the computer

This method does the same thing as described in the “From the Lock Screen” instructions, but provided that you have access to the system. Open “Start”, then a menu with a list of ways to turn off the computer, hold down the Shift key on your keyboard and select the “Restart” function. The device will begin to reboot and when turned on, will expand the recovery menu. Next steps See the previous instructions “From the lock screen”.

Hold Shift and restart the computer

Return menu F8

In previous versions of Windows, you could press the F8 key at startup and select the boot mode. In Windows 10 by default this opportunity missing, which speeds up login. But you can get it back by opening the command line and running the command bcdedit /set (default) bootmenupolicy legacy. After this, you can reboot the system, press F8 during startup and indicate that you need to go to BR.

Run the command bcdedit /set (default) bootmenupolicy legacy to return the selection menu

Using installation media

This method is suitable if you do not have access to the system, but need to log into BR. You will need installation media, which can be created using another computer from a regular flash drive or disk.

Once you receive the media, insert it into the computer being converted to BR and change the boot order in the BIOS so that the system starts from the media rather than the hard drive.
Changing the boot order
Once the installer appears, install desired language and go to the second step.
Install the desired language and move on to the next step
Open Command Prompt via System Restore
The second option for going to the command line is to hold down the F10+Shift combination when the installation program is open.

Once you are at the command line, all you have to do is run one of the following commands:

bcdedit /set (default) safeboot minimal - for the next boot in safe mode;
bcdedit /set (default) safeboot network - for safe mode with network support;
bcdedit /set (default) safeboot minimal and bcdedit /set (default) safebootalternateshell yes - for safe mode with command line and network;
bcdedit /deletevalue (default) safeboot - will need to be executed later to disable the transition to safe mode when the need for it disappears;
bcdedit /set (globalsettings) advancedoptions true - to activate the boot mode selection menu, which will appear every time you turn on the computer;
bcdedit /deletevalue (globalsettings) advancedoptions - to disable the menu enabled by the previous command.

Video: Safe Mode in Windows 10

Why might Safe Mode not work?

The computer may not boot into BR if the system is so damaged that disabling some drivers, programs and processes does not help. First, try logging into the most common BR, which does not support either the command line or the network. Secondly, even if this does not help, then reset the system, reinstall or restore it from a restore point, after which the computer should start working both in normal mode and in safe mode.

Exiting Safe Mode

To get out of BR, you need to know how you got into it. If you use “System Restore” or hold down the Shift key and reboot, then just reboot the system again or turn off the computer and turn it on again, after which the device will automatically return to normal mode. If you logged in by executing commands on the command line, then open the command line again and write a command that disables logging into safe mode. If the login was performed when BR was enabled in the system configuration, then re-open the configuration, go to the “Boot” block and uncheck the “Safe” mode, thereby disabling the computer to be switched to this mode the next time the system is rebooted.

Uncheck “Safe Mode”

So, you can go to safe mode in Windows 10 in different ways: both with and without access to the system. If safe mode does not work, you should think that the system files are too damaged and you need to reinstall or restore the entire system. To exit Safe Mode, you must restart your computer or cancel Safe Mode entry using configuration or commands before restarting the device.

You can launch the System Configuration utility using the search built into the taskbar. Just enter your request and click on the topmost line in the search results. In the window that appears, go to the “Download” tab and check the “Minimal” option. Confirm your choice by clicking on the “OK” button. A dialog box will appear asking you if you want to restart your computer right now. After your consent operating system Windows 10 will boot into Safe Mode.

Method 2: Command Line

Experienced users should remember that you can boot the system in safe mode by holding down the F8 key when starting the computer. However, in Windows 10 this feature was disabled to speed up system startup. To fix this “improvement”, you need to enter just one command at the command line.

Right-click on “Start” on the taskbar and select “Command Prompt (Admin)” from the menu that appears.
Enter the following command in the command prompt window: bcdedit /set (default) bootmenupolicy legacy
Press Enter. Close the terminal window and restart your computer. Now, when you press the F8 key during system startup, the boot method selection dialog should appear again.

If in the future you want to return everything as it was, you can do this using the following command:

Bcdedit /set (default) bootmenupolicy standard

Method 3: Special download options

This method does not require any tricks from you and seems to lie on the surface. However, how many can boast that they independently discovered this useful feature in the jungle of Windows 10 settings? Therefore, I decided to include this download method in the article too.

So, open the Start menu, click on the Settings link, and then follow the address: Update and Security → Recovery → Special boot options. Click the “Reboot Now” button. You will then be taken to the Select Action screen. It offers three options, of which we are interested in the “Diagnostics” item.

On the next screen, click the “Advanced Options” button and then “Boot Options”. At the end of this long path, the desired option called “Enable Safe Mode” awaits us. By the way, you can significantly shorten this journey if you simply hold down the Shift button while clicking on the “Shut Down” command in the “Start” menu.