Launch of a new chainsaw. How to properly break in a new chainsaw

The question of how to start a chainsaw can be divided into two parts:

Winding up according to instructions
What to do if you can’t start

The information from the first part will be useful to those who have lost the instructions, or to those whose instructions are not very informative.

The second part will tell you what to do if you have done everything correctly according to the instructions, but the chainsaw still does not start. It will also be useful for those who have trouble starting their chainsaw.

1. Start the chainsaw according to the instructions

Different chainsaws may start differently. Let's look at the two most popular mechanisms that are used to start a chainsaw that exist today. For example, let's take the Stihl MS 180 and Echo CS-352ES chainsaws. If you have a chainsaw of a different brand, then just try to start it by analogy, since most likely you have the same or similar mechanism.

Before starting the description of the starting process, I would like to note that for some chainsaws the instructions say that before starting the chainsaw you need to turn on the emergency stop brake. They say it's safer. However, with a fixed brake, it is more difficult to start the chainsaw, so it is better to unlock it. If you do everything wisely, then the chainsaw will not do anything to you during startup. If you are afraid that without locking the brake, the chainsaw will cause harm to you when you try to start it, then it is better not to take up this tool at all.

So, let's start with the Stihl MS 180.

Now let's look at the second second mechanism that allows you to start the chainsaw.

2.Why doesn’t the chainsaw start?

If you have done everything according to the instructions, but the chainsaw still does not start, then something is wrong with it. Several of the most common reasons may be to blame for this: no spark; fuel is not supplied; The air filter is clogged. So, below we propose a procedure that will help identify the reason why the chainsaw does not start.

Procedure if your chainsaw does not start

The first thing I would like to note is that if your chainsaw does not start, do not turn any screws on the carburetor. If you are not a specialist, you still won’t be able to set anything up on your own and you won’t be able to start the chainsaw.

Perform the following actions necessary to start the chainsaw in the order indicated, starting with the next action only if the previous one does not help.

First, try just leaving the chainsaw alone for 5-10 minutes. Perhaps her spark plug was flooded during cranking - it happens. Then try starting it again according to the instructions.
Remove the housing cover on the chainsaw, take out the air filter and try starting it without it. If the filter is dirty, it should be washed in soapy water and dried or replaced with a new one.
Unscrew the spark plug from the chainsaw. Check for spark. If there is no spark, then try installing a new spark plug. If a spark does not appear, this means that the ignition unit is damaged and the saw must be taken in for repair. True, visual observation of a spark does not mean that the ignition unit is working. If there is a spark, but the chainsaw still fails to start, follow the steps listed below.
If there is a spark, but the spark plug is wet, then turn the chainsaw over to drain excess gasoline from the cylinder if it has accumulated there. Pull the starter without a spark plug 10-15 times to ventilate the combustion chamber. Fire up the spark plug and screw it back in, or better yet, replace it with a new one, if available. Try starting it again according to the instructions.
If the spark plug is dry, then fill a syringe with one or two cubes of the gasoline mixture and pour it into the cylinder. Try starting the chainsaw - perhaps a small speck has gotten into the carburetor, which is preventing fuel from getting into the combustion chamber. It is quite possible that this speck will be pulled out by the flow formed after starting the chainsaw by adding fuel directly to the cylinder.
Unscrew the muffler and remove it, being careful not to damage the gasket between the muffler and the engine. Try starting it without a muffler and air filter. With the muffler removed from the chainsaw, you can inspect the piston from the inside. If there are burrs or scuffs on the walls of the cylinder or piston, or the ring on the piston is pinched by burrs, then you will be very upset, as this means that the piston is damaged or worn out. This usually happens when the fuel mixture is underfilled with oil. If such a malfunction occurs, you will have to contact the service, and perhaps think about purchasing new chainsaw, since replacing a piston is a rather expensive operation.

Thus, in this article we discussed how to start a chainsaw “according to the instructions,” as well as what to do if the chainsaw does not start. We hope you found these tips helpful.

How to start a chainsaw

The question of how to start a chainsaw can be divided into two parts:

Entry based on annotation
What to do if it doesn’t start

The information from the first part will be useful to those who have lost the annotation, or to those whose annotation is not very informative.

The 2nd part will tell you what needs to be done if you have done everything according to the instructions correctly, but the chainsaw still does not start. It will also be useful for those who have trouble starting their chainsaw.

1. Start the chainsaw according to the instructions

Different chainsaws may start differently. Let's look at two more popular mechanisms that are used to start a chainsaw, available today. For example, let's take the Stihl MS 180 and Echo CS-352ES chainsaws. To properly start a Stihl, Husqvarna or other brand of chainsaw, you must first read the instructions and follow its points. If you have a chainsaw of a different brand, then just try to start it by analogy, because most likely you have the same or a similar mechanism.

Before starting the description of the starting process, I would like to see that some chainsaws have written in the annotation that before starting the chainsaw it is necessary to turn on the critical stop brake. It's safer this way. But with a fixed brake, it is more difficult to start the chainsaw, so it is better to unlock it. If you do everything wisely, then the chainsaw will not do anything for you during startup. If you are afraid that without locking the brake, the chainsaw will cause harm to you when you try to start it, then it is better not to take up this tool at all.

So, let's start with the Stihl MS 180.

The first thing you need to do before starting this chainsaw is to move the damper adjustment lever to the lower position (Fig. 1). Please note that this lever only moves all the way down on the chainsaw if the gas button is pressed. Therefore, we hold down the gas button and move the lever down. Then we close the valve in the carburetor and secure the gas in the pressed position on the chainsaw.

Rice. 1

After you have done this, then in order to start the chainsaw, you begin to vigorously pull the starter handle until you hear that the chainsaw tried to start and immediately stalled. Then we move the lever for adjusting the position of the damper on the chainsaw one step up (Fig. 2).

Rice. 2

In this position, we again pull the starter handle until the chainsaw starts. With all this, if you manage to start it, due to the fact that the gas handle is fixed in the pressed position, it will immediately work at high speeds.

Then press and release the gas button on the chainsaw once - the throttle adjustment lever will automatically move to the working position (Fig. 3), and the chainsaw’s speed will drop. Now you can work.

Rice. 3

If you need to start a heated chainsaw, then you just need to put the lever in the position as in Fig. 3, and you can start it.

To stop the chainsaw engine, raise the damper adjustment lever to the upper position (Fig. 4).

Rice. 4

Now we will analyze the second 2nd mechanism that allows you to start the chainsaw.

First, before trying to start, turn on the ignition by moving the switch or chainsaw switch to the appropriate position (Fig. 5).

How to start a Husqvarna chainsaw correctly

How to do it right run Husqvarna chainsaw. How to start a chainsaw - a couple of the most popular ones. Recommendations for starting a chainsaw. Buy on the website www.

Chainsaw Husqvarna Husqvarna 236 video review how to start a chainsaw

Chainsaw Husqvarna(Husqvarna) 236 - overview of characteristics, first start of a cold engine. We are on VKontakte: .

Rice. 5

Then press the swap primer several times (Fig. 6). Gasoline will be pumped into it and then press it another 3-5 times. If you have a chainsaw without primer, then proceed to the next step.

Rice. 6

Now, on the chainsaw, pull out the damper position adjustment lever to the end (Fig. 7). In some chainsaws, in order to start it, this lever can only be pulled out when the gas button is pressed, while the gas button itself is locked in the pressed position. How to start a Husqvarna chainsaw correctly. How to start a chainsaw correctly. For others, you don't need to press the gas button. True, in this case, the gas on the chainsaw is fixed automatically or not fixed at all.

Rice. 7

Next, we pull the starter handle until the chainsaw tries to start and stalls. After this, push the damper position adjustment lever on the chainsaw back all the way and pull the starter handle again until the chainsaw starts. 5 how to start a Shtil 180 chainsaw correctly? 6 how to start the engine. In some cases, in order to start the chainsaw, the throttle position adjustment lever needs to be pushed in only halfway, and it needs to be pushed in all the way after the chainsaw has started.

Chainsaws with locking gas have high revs after starting. Where there is no fixation, the speed is low. In the latter case, due to low speeds, the chainsaw usually stalls after working for a short time. In this case, without adjusting anything, we start the chainsaw again and this may happen several times until the chainsaw warms up a little and can already maintain speed and not stall.

To start a hot chainsaw, you just need to turn on the ignition by moving the corresponding toggle switch, and you can pull the starter handle.

2.Why doesn’t the chainsaw start?

Procedure if your chainsaw does not start

Read also

The first thing I would like to note is that if your chainsaw does not start, do not turn any screws on the carburetor. You need to start the saw, you need to prepare the correct mixture of Husqvarna saw 142. sometimes. If you are not a specialist, you still won’t be able to set anything up on your own and you won’t be able to start the chainsaw.

Perform the following actions necessary to start the chainsaw in the order indicated, starting with the next action only if the previous one does not help.

First, try just leaving the chainsaw alone for 5-10 minutes. Perhaps her spark plug was flooded during cranking - it happens. Then try starting it again according to the instructions.
Remove the housing cover on the chainsaw, take out the air filter and try starting it without it. If the filter is dirty, it should be washed in soapy water and dried or replaced with a new one.
Unscrew the spark plug from the chainsaw. Check for spark. Malfunctions of the Husqvarna 236 chainsaw. Recently purchased husqvarna chainsaw 236, at the moment I don’t understand how to properly break it in. If there is no spark, then try installing a new spark plug. If a spark does not appear, this means that the ignition unit is damaged and the saw must be taken in for repair. True, visual observation of a spark does not mean that the ignition unit is working. If there is a spark, but the chainsaw still fails to start, follow the steps listed below.
If there is a spark, but the spark plug is wet, then turn the chainsaw over to drain excess gasoline from the cylinder if it has accumulated there. Pull the starter without a spark plug 10-15 times to ventilate the combustion chamber. 3.1 how to dilute gasoline for a Shtil 180 chainsaw? 3.2 how to start a Shtil 180 chainsaw correctly? Fire up the spark plug and screw it back in, or better yet, replace it with a new one, if available. Try starting it again according to the instructions.
If the spark plug is dry, then fill a syringe with one or two cubes of the gasoline mixture and pour it into the cylinder. Try starting the chainsaw - perhaps a small speck has gotten into the carburetor, which is preventing fuel from getting into the combustion chamber. It is quite possible that this speck will be pulled out by the flow formed after starting the chainsaw by adding fuel directly to the cylinder.
Unscrew the muffler and remove it, being careful not to damage the gasket between the muffler and the engine. how to start up how to properly clean a chainsaw Chinese chainsaw. Try starting it without a muffler and air filter. With the muffler removed from the chainsaw, you can inspect the piston from the inside. Why do you need to break in a chainsaw? How to properly run in a new or repaired chainsaw Shtil, Husqvarna and others. If there are burrs or scuffs on the walls of the cylinder or piston, or the ring on the piston is pinched by burrs, then you will be very upset, as this means that the piston is damaged or worn out. This usually happens when the fuel mixture is underfilled with oil. If such a malfunction occurs, you will have to contact a service center, and perhaps think about buying a new chainsaw, since replacing a piston chainsaw is a fairly expensive operation.

Read also

There are no teeth, why would a summer resident who grows vegetables and fruits, or a home owner with a small garden and several flower beds, need a chainsaw? The question disappears when there is a desire to build a bathhouse, renovate a greenhouse, knock down an old business, or simply make a bench to relax. Unfortunately...

How to start a chainsaw

The question is how start a chainsaw, can be divided into two parts:

Entry based on annotation
What to do if it doesn’t start

The information from the first part will be useful to those who have lost the annotation, or to those whose annotation is not very informative.

The 2nd part will tell you what needs to be done if you have done everything according to the instructions correctly, but the chainsaw still does not start. It will also be useful to those who have chainsaw doesn't start well.

1. Start the chainsaw according to the instructions

Different chainsaws may start differently. Let's look at two more popular mechanisms that are used to start a chainsaw, available today. For example, let's take the Stihl MS 180 and Echo CS-352ES chainsaws. If you have a chainsaw of a different brand, then just try to start it by analogy, because most likely you have the same or a similar mechanism.

Before starting the description of the starting process, I would like to see that some chainsaws have written in the annotation that before starting the chainsaw it is necessary to turn on the critical stop brake. It's safer this way. But with a fixed brake, it is more difficult to start the chainsaw, so it is better to unlock it. If you do everything wisely, then the chainsaw will not do anything for you during startup. If you are afraid that the chainsaw will not lock the brake when you try to start, will be able to cause harm to you, then it is better not to take up this tool at all.

So, let's start with the Stihl MS 180.

The first thing you need to do before starting this chainsaw is to move the damper adjustment lever to the lower position (Fig. 1). Please note that this lever only moves all the way down on the chainsaw if the gas button is pressed. Therefore, we hold down the gas button and move the lever down. Then we close the valve in the carburetor and secure the gas in the pressed position on the chainsaw.

Then press and release the gas button on the chainsaw once - adjustment lever the damper will automatically move to the working position (Fig. 3), and the speed of the chainsaw will drop. Now you can work.

If you need to start a heated chainsaw, then you just need to put the lever in the position as in Fig. 3, and you can start it.

To stop the chainsaw motor, raise the damper adjustment lever to the upper position (Fig. 4).

Now we will analyze the second 2nd mechanism that allows you to start the chainsaw.

First, before trying to start, turn on the ignition by moving the switch or chainsaw switch to the appropriate position (Fig. 5).

Launching Chainsaw Partner

How start a chainsaw partner Kaip uzvesti partner pjukla.

How to start a chainsaw partner

Repair chainsaws Partner.Carburetor repair. Carburetor adjustment.

Then press the swap primer several times (Fig. 6). Gasoline will be pumped into it and then press it another 3-5 times. If you have a chainsaw without primer, then proceed to the next step.

Now, on the chainsaw, pull out the damper position adjustment lever to the end (Fig. 7). In some chainsaws, in order to start it, this lever can only be pulled out when the gas button is pressed, while the gas button itself is locked in the pressed position. For others, you don't need to press the gas button. True, in this case, the gas on the chainsaw is fixed automatically or not fixed at all.

Next, we pull the starter handle until the chainsaw tries to start and stalls. After that we push it with a chainsaw adjustment lever position the damper back all the way and pull the starter handle again until the chainsaw starts. In some cases, in order to start the chainsaw, the throttle position adjustment lever needs to be pushed in only halfway, and it needs to be pushed in all the way after the chainsaw has started.

To start a hot chainsaw, you just need to turn on the ignition by moving the corresponding toggle switch, and you can pull the starter handle.

2.Why doesn’t the chainsaw start?

Procedure if your chainsaw does not start

Read:

Perform the following actions necessary to start the chainsaw in the order indicated, starting with the next action only if the previous one does not help.

First, try just leaving the chainsaw alone for 5-10 minutes. Perhaps her spark plug was flooded during cranking - it happens. Then try starting it again according to the instructions.
Remove the housing cover on the chainsaw, take out the air filter and try starting it without it. If the filter is dirty, it should be washed in soapy water and dried or replaced with a new one.
Unscrew the spark plug from the chainsaw. Check for spark. If there is no spark, then try installing a new spark plug. If a spark does not appear, this means that the ignition unit is damaged and the saw must be taken in for repair. True, visual observation of a spark does not mean that the ignition unit is working. If there is a spark, but the chainsaw still fails to start, follow the steps listed below.
If there is a spark, but the spark plug is wet, then turn the chainsaw over to drain excess gasoline from the cylinder if it has accumulated there. Pull the starter without a spark plug 10-15 times to ventilate the combustion chamber. Fire up the spark plug and screw it back in, or better yet, replace it with a new one, if available. Try starting it again according to the instructions.
If the spark plug is dry, then fill a syringe with one or two cubes of the gasoline mixture and pour it into the cylinder. Try starting the chainsaw - perhaps a small speck has gotten into the carburetor, which is preventing fuel from getting into the combustion chamber. It is quite possible that this speck will be pulled out by the flow formed after starting the chainsaw by adding fuel directly to the cylinder.
Unscrew the muffler and remove it, being careful not to damage the gasket between the muffler and the engine. Try starting it without a muffler and air filter. With the muffler removed from the chainsaw, you can inspect the piston from the inside. If there are burrs or scuffs on the walls of the cylinder or piston, or the ring on the piston is pinched by burrs, then you will be very upset, as this means that the piston is damaged or worn out. This usually happens when the fuel mixture is underfilled with oil. If such a malfunction occurs, you will have to contact a service center, and perhaps think about buying a new chainsaw, so

Many people buy chainsaws for the first time, without any experience with this tool. Despite this, in order to learn how to use a tool, there is no need to take special courses. After the purchase, there is a great desire to quickly test the tool in use. To do this, be sure to first read the operating instructions for the tool, as well as safety precautions when working with a chainsaw. In this article we will look at how to start a chainsaw correctly and how to operate it.

Every master who owns a chainsaw should know how to start it correctly. Initially, it should be noted that in order to start the tool, it must be filled with fuel. For this, not just gasoline is used, but a gasoline-oil mixture.

Important to know! Pure gasoline cannot be used to operate chainsaws. It is necessary to refuel exclusively with a mixture of gasoline and the appropriate oil for two-stroke engines.

First you need to figure out how to properly prepare the gasoline-oil mixture. These proportions are naturally indicated in the instructions, but since few people read them, this issue should be considered in detail.

Gasoline grade AI92 and higher is used as fuel. You will also need to use the appropriate oil, which can be purchased at the same place where you bought the chainsaw. The proportion of gasoline and oil is 1 to 50, after mixing which must be thoroughly stirred. In this case, the mixture should be prepared in a separate container ( plastic bottle), since it is not only convenient to store the prepared fuel mixture in it, but also convenient to refill the tool tank through the small diameter of the gas tank hatch.

The prepared mixture should be poured into the fuel tank, the lid of which is indicated by an image of a gas station. This is very important, since chainsaws have two similar tanks. The second tank is intended for filling oil, which is used to lubricate the bar and chain during the operation of the tool.

Important to know! After refueling the gas tank, do not rush to start the tool. You should also be sure to fill the oil tank with oil to prevent the chain from overheating, which could result in damage to the chain.

As an oil for lubricating the chain, it is recommended to use a special branded or motor oil for the car, but under no circumstances should it be used. If you see how your neighbor puts waste into a chainsaw, then you should not repeat his mistakes, as this significantly reduces the service life of not only the chain, but also the tool itself.

It is always necessary to monitor the level of oil and fuel mixture in the tanks, but it is recommended to perform refueling according to the following scheme:

Fill the fuel-oil mixture into the tank until it is full.
At the same time, oil to lubricate the chain is also filled to full.
The consumption of oil and fuel mixture is approximately the same, so it is recommended to fill both tanks at the same time.

How to start a chainsaw: starting features

Once the tool is ready to run, you can begin. The process of starting a chainsaw is as follows:

Having started the chainsaw, you can begin cutting wood.

Important to know! The material describes the process of launching the tool, after which you can start working with it. Do not forget that if you bought a new chainsaw, you should first break it in.

How to use a chainsaw correctly

Working with a chainsaw is one of the most dangerous, so it is very important to control the position of the bar as far away from you as possible. Each subsequent action must be deliberate, otherwise the consequences in the form of serious injuries cannot be avoided. If you have to work with a chainsaw, you should know the following features:

Work is required only in appropriate protective clothing: protective helmet, headphones, suit, gloves and shoes. This will increase the safety of the master several times.
You need to hold the tool exclusively with both hands, and take the appropriate position with your feet in the form of a reliable support. Working while standing in an awkward position is strictly prohibited.
The tool should be leaned against the wood with the chain moving at medium speed.
Sawing with the tip of the tire should be done with extreme caution, as the likelihood of a kickback is quite high.
When working, you should exclude from the sawing area all unnecessary objects that could cause imbalance.
If you are tired, then you need to turn off the instrument, allowing not only yourself, but also him, to rest.
When working, your legs should be spread wide apart and your back should be straight.
You can cut wood not only with the bottom of the bar, but also with the top, but it is important to know that the chain will lead in the appropriate direction.
When moving with a chainsaw to another place, the tool should be turned off or put on the hand brake.

The above features are also suitable for working with an electric saw. It is better to do the work in tandem with a partner who can not only provide backup, but also replace you when you get tired. After all, working with such a tool is not easy, since in addition to physical strength, intelligence is also required. By following the rules described above for working with a chainsaw, all types of manipulations performed will have a successful conclusion.

Chainsaw care

One more an important condition when working with a tool is to ensure proper care for it. After completing the work, you should not leave the chainsaw at the workplace until the next time. It is necessary to clean it of sawdust and debris, periodically check the chain tension, as well as the fullness of the gas tank and oil tank. It is also important to monitor the air filter for clogging.

Not recommended for a long time Store the chainsaw with fuel filled, so it is better to drain it. It is necessary to replace the chain, tire and drive sprocket in a timely manner, as these are elements that wear out quickly.

In conclusion, it is important to note that over time, the chain tends to stretch, which as a result makes it impossible to tighten. If you observe this property, it is not recommended to continue using the tool until cutting tool will not tear or come off the tire at all. If a person is not confident in his abilities, then it is better not to undertake sawing large-diameter trees.

We will devote the second part to what needs to be done if you have done everything correctly according to the instructions, but the chainsaw still does not start. This part will also be useful for those who have trouble starting their chainsaw.

1. Start the chainsaw according to the instructions

Please note that different chainsaws may start differently. As an example, we will take a Stihl MS chainsaw and show you how to start it. If you have a chainsaw of a different brand, then try to start it in the same way, since most likely the mechanism of your saw is the same or differs slightly.
Before we begin describing the startup process, we would like to draw your attention to the point in the instructions that states that before starting the chainsaw, you need to turn on the emergency stop brake. This is suggested for security reasons. However, this greatly complicates the task of starting the chainsaw, so let’s unlock it. If you do everything with care, then the chainsaw will not harm you during startup. If there are still concerns that without fixing the brake, the chainsaw may cause harm to you during startup, then it is better not to take up this tool at all.

Let's get started. The first thing you need to do before starting the chainsaw is to move the damper adjustment lever to the lower position (Fig. 1). Please note that this lever moves down on the chainsaw all the way only if the gas button is pressed. Therefore, we hold down the gas button and move the lever down. Thus, we close the valve in the carburetor and fix the gas in the pressed position on the chainsaw.

After you have done this, in order to start the chainsaw, we begin to vigorously pull the starter handle, having heard that the chainsaw tried to start and immediately stalled, we move the lever for adjusting the position of the damper on the chainsaw one step up (Fig. 2).

Rice. 2

In this position, we pull the starter handle again until the chainsaw starts. But due to the fact that the gas handle was locked in the pressed position, the running chainsaw will immediately work at high speeds.
Next, we press and release the gas button on the chainsaw once - the throttle adjustment lever is automatically set to the working position (Fig. 3), and the speed of the chainsaw is reduced. Now you can get to work.

Rice. 3

If you need to start a heated chainsaw, then you just need to put the lever in the position as in Fig. 3, and you can start.
To stop the chainsaw engine, raise the damper adjustment lever to the upper position (Fig. 4).

Rice. 4

2. Why doesn’t the chainsaw start?

If you have done everything according to the instructions, but the chainsaw still does not start, then something is wrong with it. Several of the most common reasons may be to blame for this: no spark; fuel is not supplied; The air filter is clogged. Below we offer a procedure that will help identify the reason why the chainsaw does not start.

3. Procedure if your chainsaw does not start

It is very important that if your chainsaw does not start, do not tighten any screws on the carburetor unless you are a specialist. You still won’t be able to configure anything yourself and you won’t be able to start the chainsaw.
Perform the following actions necessary to start the chainsaw in the order indicated, starting with the next action only if the previous one does not help.
1) Try to start by simply leaving the chainsaw alone for 5-10 minutes. Perhaps the spark plug was flooded during startup - it happens. Then try to run it again according to the instructions.
2) Remove the housing cover of the chainsaw, take out the air filter and try starting it without it. If the filter is dirty, it should be washed in soapy water and dried or replaced with a new one.
3) Unscrew the spark plug from the chainsaw. Check for spark. If there is no spark, then try installing a new spark plug. If a spark does not appear, this means that the ignition unit is damaged and the saw must be taken in for repair. True, visual observation of a spark does not mean that the ignition unit is working. If there is a spark, but the chainsaw still fails to start, do the following steps.
4) If there is a spark, but the spark plug is wet, then turn the chainsaw over to drain excess gasoline from the cylinder if it has accumulated there. Pull the starter without a spark plug 10-15 times to ventilate the combustion chamber. Fire up the spark plug and screw it back in, or better yet, replace it with a new one, if available. Try starting it again according to the instructions.
5) If the spark plug is dry, then fill a syringe with one or two cubes of the gasoline mixture and pour it into the cylinder. Try starting the chainsaw - perhaps a small speck has gotten into the carburetor, which is preventing fuel from getting into the combustion chamber. It is quite possible that this speck will be pulled out by the flow formed after starting the chainsaw by adding fuel directly to the cylinder.
6) Unscrew the muffler and remove it, being careful not to damage the gasket between the muffler and the engine. Try running it without a muffler and air filter. With the muffler removed from the chainsaw, you can inspect the piston from the inside. If there are burrs or scuffs on the walls of the cylinder or piston, or the ring on the piston is pinched by burrs, then you will be very upset, as this means that the piston is damaged or worn out. This usually happens when the fuel mixture is underfilled with oil. If such a malfunction occurs, you will have to contact a service center, and perhaps think about buying a new chainsaw, since replacing a piston chainsaw is a fairly expensive operation.
Thus, in this article we discussed how to start a chainsaw “according to the instructions,” as well as what to do if the chainsaw does not start. We hope you found these tips helpful.