Instructions
You should start with the size of the future frame. Only for you, it will be for a photo 10x15 or 9x12 cm. The next step is to measure the required length, and then carefully saw off the edges of the rail at an angle of 45°. When the future sides of the frame are ready, we take the stapler and divide it into two equal L-shaped parts. With the help of such staples, you can connect the two sides of the frame so that the joint remains completely invisible. But in order to secure it more firmly, before connecting the sides with staples, you should lubricate them with glue.
After the glue has dried, the frame is ready to apply paint to its surface, and there will be room to show your imagination!
Now you need to cut out the drawing using a cutter. To ensure everything comes out smooth, place it under the edges and run the cutter strictly along the ruler. It is not the main rectangle that needs to be cut, but the entire drawing.
After you have cut out the drawing, you need to bend 4 rectangles on each side. Apply a ruler and bend each rectangle individually. So you should end up with a rectangle the size of the photo in the center.
Next you will need glue. Holding the design face down, fold and glue the rectangles on each side. When folded, you should end up with a voluminous rectangle on each side. Since you folded the rectangles along, they should end up face up.
After the 4 rectangles have been glued, you should connect them together. To do this, insert the ends of one rectangle into the other, fastening with glue. So . All 4 rectangles must be glued together.
So, we got volumetric . If you want to make it even more beautiful, do all the operations again. Having received 2 volumetric frames, fasten them together with pieces of cardboard to form doors.
Video on the topic
Please note
Since you may cut or draw unevenly, have plenty of cardboard on hand.
A picture or photograph placed in a three-dimensional frame will become an original gift.
Surely everyone in the house has a photo that you don’t mind putting in frame and hang it in a visible place so that it is always in front of your eyes. Now there are many ways to do frame. But there are problems with making an oval one.
You will need
- - computer with printer;
- - A3 paper for printing;
- - three pieces of natural felt different colors according to the size of the future frame;
- - a device used to hang pictures;
- - 1 sheet of thick cardboard;
- - pencil;
- - scissors;
- - glue.
Instructions
First make for your product. It will consist of three oval frames of different colors and sizes, glued one on top of the other. To do this, print out the ovals created in a graphics editor on paper. The first is the size of external diameters 40 and 20, the second is 38 and 18, the third is 35 and 15. These sizes internal diameters given conditionally. You determine them yourself by the size of the photograph for which you are taking them, but the internal diameters of the second oval should be smaller than the internal diameters of the first, similarly with the third and second ovals. The edges of the first oval can be left smooth, but you can use scissors to create wavy patterns. Cut out the edges of the second oval, like a flower, and make the third oval 1.5-2 cm thick so that it fits completely on the second one.
Transfer each paper oval to felt and cut out. For each oval, choose a different color. Decide on the inner edges of the first oval, as they depend entirely on the photo. Try the photo on the frame. If the photo is larger, then you need to crop it a little. The third is the narrowest oval, glue it to the second. Glue the second oval to the third in the same way.
Give the glue time to dry. Cut out a thick oval slightly smaller than the first one. When the glue dries, glue the frames from along the edges to so that the photo fits in the middle. Attach a hanging device to the back of the frame. Let the glue dry well and then you can hang the photo on the wall.
Please note
If, after the frame is already made, the photo does not fit inside the frame, round off its sharp edges and trim off what is unnecessary.
Useful advice
You can change the design of the frame yourself to suit your taste, add all sorts of little things to make the product decorative. To know when the glue has dried, read the instructions for it.
For your photo to have a finished look, it must be inserted into frame. You can, of course, use ready-made ones. A large number of different PSD frames were developed by photo designers for literally every occasion. However, in order to design your photos in the same style (to organize a photo gallery, for example), you need to make your own, branded frame.
Instructions
So open it photograph in Photoshop and unlock the layer. To do this, double-click on the layer thumbnail and click “OK” in the window that opens.
Now you need to create a new layer. If you simply execute the “Create a new layer” command, it will be formed above the main layer. Because the new layer must be located below it by executing the command while holding down the ctrl key.
Go to the newly created layer and select “Canvas Size...” from the “Image” menu. In the window that opens, you need to set the canvas size larger than the image size. Select the unit of measurement - percentage, set the width - 10%, height - 7%. Check the “Relative” box and place it in the center. If you want to leave an autograph, your signature or a logo at the bottom of the frame, repeat the last step, set the size of the new canvas to 0% for width, 7% for height, and position to the top.
Fill this layer with black by pressing alt + delete. If you need a different frame color, fill the layer after selecting the desired color.
Now shade photograph. To do this, double-click on the photo layer or click the “Add Layer Style” button. Select “Stroke...” from the menu. Set the size to 4px, position to inside, color to white.
If you are not satisfied with the design option, try experimenting with color, stroke size, and other blending options.
Now all that remains is to use the “Text” tool and place a signature or logo on the frame. Your frame is ready.
Are you satisfied with the result? Then write down the entire algorithm of actions in the action (menu “Window” - “Operations” - “Create operation”). Now you don't have to do the same steps for every photo. Select the necessary photos, launch the newly created action for each of them. The photos are ready, print them and create your own photo gallery.
Sources:
- Creating frames in Photoshop
The decorative frame is an important detail in the design of the image. Of course, you can always download a ready-made template and insert a photo into it. However, it's not that difficult to create your own frame using Photoshop tools.
You will need
- - Photoshop program;
- - image.
Instructions
Load the picture for which you want to create a frame into Photoshop by opening the dialog box with the Ctrl+O keyboard shortcut or the Open command from the File menu.
Create a new layer on which the frame will be located. This can be done using the hotkeys Ctrl+Shift+N or the Layer option from the New group of the Layer menu. By default, the newly created layer will be active.
Since ancient times, when people first learned to build houses, they wanted to somehow decorate their home. Apart from purely decorative purposes, various patterns also had a sacred meaning: paintings, amulets, and carvings served as amulets for superstitious villagers. Until the revolution, carvings decorated the facades of houses, window frames, as well as the interior decoration of churches and temples. Later, in the Soviet Union, this art was, if not completely forgotten, then only a small part was preserved, mainly in villages and villages. Photos, drawings and even the simplest sketches to create beautiful carving woodworking will be useful to masters and beginners of this business.
Currently, almost all decorations have lost their sacred meaning, and such decoration of the interior and facades of houses has become an attribute of rich people or craftsmen. Not everyone can afford, say, furniture with carved legs or figured skirting boards in an apartment: most of them are made by hand, so either wealthy people order them for interior design, or craftsmen cut them out for themselves and their homes.
IN given time carving is taught in some schools, courses and even at universities. But you don’t have to pay a lot of money for training; you can master this skill yourself, using our selection of photographs, drawings and simple sketches to create beautiful wood carvings.
Used for carving wood various instruments, both manual and electric. Electric ones include milling cutter, electric jigsaw, drill, and electric multifunctional machines can also be useful. Regarding hand tools, then the choice here is even greater: various chisels, a hand jigsaw and a hacksaw, files, carpenter’s mallets, and sandpaper help in carving. In addition, specialized kits for cutting wood are sold. They can be bought in large construction stores, and also order on Chinese websites. Just beware of options that are too cheap, because the quality may not be suitable for working with such a demanding material.
In addition to tools, you will need stains, varnish and brushes for applying them. They will be needed after performing artistic carving for final finishing ornaments.
We study the varieties of artistic wood carving
There are many types of artistic carving. They differ in the cutting method, the appearance of the finished product and, in some cases, the tools for their manufacture.
- Through wood carving - features and technology.
Through threads can be slotted or sawn. Carving is done with a chisel or chisel. Sawing is the same, but the patterns are sawed through with a jigsaw. This type of carving is also called openwork. Widely used for decoration window frames and facades of wooden houses.
- Stencils for slotted wood carving.
- Flat wood carving: creation, varieties.
This type of carving is characterized by the fact that the design is sawed deep into the background. Depending on the ornament, it is divided into contour, geometric, and bracketed. Contour carvings appear as grooves carved into a flat background. Geometric involves a combination of shapes, hence its name. Bracketed - the ornament consists of recesses in the form of brackets. The photo shows examples of work in a similar style, as well as drawings for performing work in this technique.
- Technique of flat-relief wood carving: types of ornaments, motifs.
Flat-relief carving is a three-dimensional ornament depicting animals, faces, even scenes, carved on wood and protruding from the background to the same height, that is, when viewed from the side it looks flat, which is where the name comes from. This technique is popular when making decorations for boxes, paintings, and individual decorative elements.
- Sculptural wood carving technique.
The most complex, but also spectacular, type of carving can be called sculptural. In this case, a wooden block is needed, from which a volumetric element is gradually cut out using chisels and various shaped tools. This technique includes various souvenirs and figurines, sometimes the legs of tables, chairs and sofas, and you can also cut out a part, for example, for a photo frame or other decorative element, after which the individual parts are glued to the base.
How to work with templates and stencils for wood carving
To create your first product made using the carving technique, you need to print a stencil and transfer it to wood. This can be done using carbon paper, or by cutting out a paper outline and tracing it with a pencil. Next, cut along the contours using the selected technique. For beginners, slotted carving is best, because in this case you need to hold the tool correctly in your hands and follow the contour clearly. And for masters who already have more experience, the following sketches will be useful for more complex techniques.
Carving stencil for frame.
Video selection on the topic of the article
Carved frames for pictures and mirrors - buy with delivery
By visiting our website, in the frames category, you will be able to appreciate the variety of products for sale. Finished carvings are made in traditional sizes using solid oak or beech. We offer to buy ready-made or custom-made carved frames not only from valuable wood, but also an economical option using MDF. In any case, you will receive a product of excellent quality with high aesthetic characteristics.
Our assortment includes the following types of products:
- Round frames for mirrors and portraits;
- Carved oval frames;
- Rectangular frames.
The wood undergoes careful selection and culling before work, ensuring the products are durable, elegant in shape and attractive. appearance. You can always do independent choice, having made the desired purchase. If desired, you can order a carved mirror frame made according to your sketches and drawings. Our craftsmen are always ready to offer you much more than is presented in the assortment of the online store.
Production technology
Home and distinguishing feature our products have unsurpassed workmanship. We work on modern woodworking equipment, which is based on high-tech milling machines with CNC. Wood carving performed on our machines looks extremely attractive. Finished frames do not require additional sanding and can be immediately used for their intended purpose.
Thanks to special software, the development of sketches is carried out using three-dimensional modeling technology. 3D – carving, one of the elements latest technology, which significantly increased production efficiency, workmanship, and reduced production time. Today you can buy a carved frame that will be made right in your presence.
Every move cutting tool matches the lines shown in the sketch. During the work process, you can always make adjustments to the working sketch by changing the thread profile, details of the design or ornament. High accuracy equipment ensures the cleanliness and correctness of the drawing lines.
Decorative wooden frames- rich product at a low price
Are you used to seeing paintings and mirrors in ordinary frames made from ready-made baguette? We are ready to surprise you by offering carved frames - products from natural wood, which will add sophistication to the artistic image, decorate any interior, giving your home or any other room a feeling of wealth and luxury. The frame with a relief profile, made of expensive wood, is in itself a work of art. Wood carving allows you to create original ornaments and decorative elements, which, in combination with high quality execution, make such a product very popular and in demand.
History of origin
The art of wood carving has ancient roots. For the first time the idea of decorating mirrors and paintings with wood carved frame came to the minds of the masters Ancient Rome, at the beginning of the 4th century. Relief frames have become firmly established thanks to the efforts of artists. With the advent of new styles in architecture, carved products become a mandatory attribute of the interior of residential premises for the nobility, palaces and museums. The painting is enclosed in a rich carved wooden frame, which you can buy right now on our website, looks attractive and luxurious.
There have always been photographs the best way keep pleasant memories. And how nice it is when the most expensive ones are always in sight. Carved wooden photo frames will be the best frame for them. After all, a correctly selected frame can decorate and complement the image.
Photo frames made of wood and other natural materials look much better and more interesting than simple plastic ones. At the same time, the possibility of giving any shapes and reliefs, painting and covering with all kinds of coatings, for example, varnish (regular or with a craquelure effect or something else), stain, remains important. This treatment helps create a unique element for any interior. The carved shop offers not only to buy wooden frame for photos, but also to produce an exclusive item according to your wishes.
Collage of photo frames
Today, collages of several frames are especially popular. They look great in any
interior. In this case, the set usually consists of different sizes and shapes, but the same in style and color. However, sometimes such a photo gallery can be assembled from different frames that fit together. Therefore, it is better to buy or order them as a set at once.
A carved wooden photo frame or a set of photo frames can be a wonderful gift for any occasion. A product made by a good carver looks beautiful, neat and original. They will complement and decorate any interior, fill the
standing on the wall in the most advantageous way.
Even now, in the digital age, printed photographs remain very popular. And, of course, it is best to frame them with natural materials. This makes them even more valuable and spiritual. Electronic photo frames will never be able to create the same comfort and atmosphere of pleasant nostalgia as textured, warm frames made from natural wood made by human hands and with soul.
We offer custom wood frames. Our craftsmen carry out work according to artistic carving for many years and have vast experience in this direction. You can choose the design and processing that is most interesting to you. In addition, we listen to the wishes of each client and can create an item according to the author’s sketches. This allows you to get a unique creation that has a soul, and not just a factory copy of a stamped product.
How to choose the right frame or collage for a photo
First of all, determine required length and width. Wooden frames can be made to order according to the specified dimensions. This is important because if the photo is larger, it will have to be cropped or reprinted, and when the photo is smaller, there will be empty edges, which does not look very nice.
Secondly, pay attention to the shape. They can be square, rectangular, oval or others. So, for example, rounded shapes best suited for portraits close up. Rectangular ones are more versatile and suitable for almost any photo. Oval photo frames need to be chosen quite carefully, since the corners of the image will need to be cropped, and it should not lose important details and fit in correctly.
Thirdly, the choice of color and style should harmoniously fit into the interior of the room in which they will be located. This, of course, does not mean that they should blend into the general background; on the contrary, sometimes special emphasis can be placed on them.
In addition, it is worth considering whether the carved wooden photo frames will be placed on the wall or stand on a horizontal surface. As a rule, photo frames provide several types of fastening and installation, but not always.
The ancient art of carving wood and plywood has always been considered a fascinating activity, with the help carved jewelry erected towers and huts of unique beauty, most of which are still considered architectural monuments today. Woodcarving, or wood carving, is becoming a popular skill; it is used to make large and small masterpieces. Beginning craftsmen are helped to create masterpieces by ready-made stencils for wood carving - special templates from which three-dimensional ornaments and patterns are created.
The ancient art of wood carving has always been considered a fascinating activity.
Stencils for woodworking are used to transfer ready-made identical patterns onto a three-dimensional plane. Most often, such work is done to decorate walls and window casings, which is why they are considered the most common sketches for working with wooden surfaces.
Carved patterns made using a stencil are divided into several types by craftsmen:
- ribbon carved ornament;
- carved platbands;
- carved balusters;
- pilaster;
- towels;
- brackets.
Using such ready-made templates, even a novice master can arrange and independently create a unique design and a real masterpiece of carved art. Using a ready-made stencil you can easily decorate any wooden product. Artistic cutting and openwork designs are usually useful when decorating:
- pieces of furniture;
- dishes;
- picture or photograph frames;
- boxes.
If a master wants to convey certain national motifs or features of an object in his work, he should first study the subtleties and nuances of ornaments and patterns.
How to learn wood carving (video)
Sketches for patterns: instructions
To those craftsmen who recently picked up tools, experienced craftsmen It is recommended to take into account the following nuances when preparing for work:
- the engraving template should be as simple and understandable as possible, without complex or ornate elements;
- each type of thread has its own templates for work;
- lines from the existing template to the material for work are transferred as accurately as possible, since this is the only way to achieve accuracy in the work.
When choosing a design for subsequent transfer to the material, it is worth considering a number of subtleties that will help you make the product professionally and skillfully.
- For a large product, you should not choose an openwork pattern or a pattern with small details. Such a design will be lost on the finished item and will not make it unique.
- Small items are not decorated with patterns with large elements and ornamental details, so as not to hide the shape and uniqueness of the product.
- Proportions when transferring details to fragments of the product should be observed to the finest detail so as not to disrupt the integrity of the finished ornament.
You should not start work without pre-creation a sketch that you can make yourself or download ready-made photographs from the Internet.
Carved frames for a mirror: an interesting idea
Lovers of Art Nouveau style interiors will appreciate carved frames that frame paintings or mirrors.
Such interior items not only look rich and unique, but also add a special “zest” to the interior of the room. When cutting out mirror frames, experts recommend using a few basic styles to work with.
- The double baroque style contains two contours inside and outside, represented by openwork curls. The craftsmen included a feather profile in this style; it reflects some of the lightness and grace of the rectangular-shaped product.
- For mirrors, the feather profile with a back is ideal, providing a dense back part where the mirror is attached.
- The refined profile also has a dumbbell style, despite the somewhat massive frame. It is these frames that hold a heavy and massive mirror well.
Lovers of Art Nouveau style interiors will appreciate carved frames that frame paintings or mirrors.
For the manufacture of mirror frames are used and special methods decoration:
- gilding with pre-polishing;
- varnishing with a transparent material;
- patina, or artificial aging wood;
- antique decoration with cracks called craquelure.
In order to transfer the pattern from the stencil to the product, use soft pencils, transferring the pattern as accurately and accurately as possible.
Picture stencils for jigsaw and wood carving in pencil: how to make
Those craftsmen who are just starting to try themselves as a wood carver should understand that high-quality cutting can be done only after the template for cutting has been correctly prepared.
- Initially, you should decide on a blank for carving. For beginners would be better suited geometric carving on a plane or a simple wooden figurine.
- A sketch of the sketch is made on paper with a pencil, while the main zones and places where the carving is planned are clearly defined.
- Using special drawing devices, the image is transferred to graph paper.
- Repeating parts are made of thick paper or thick cardboard.
- The finished paper pattern is attached to a wooden base and copied.
When making stencils for carvings made using the slotting technique, craftsmen recommend initially using thick paper for patterns.
Geometric and flat-relief carving: what is it?
Name geometric carving on wood comes from the main details and elements at the base of the pattern: geometric shapes, figures and their elements. Such ornaments are used to decorate furniture and household utensils.
To create this engraving you will need a simple set of tools:
- a piece of soft wood board;
- special knife-jamb;
- simple soft pencil;
- ruler.
When making the product, you will not need an applied paper blank, since the elements of the geometric pattern can be applied directly to the wooden blank.
Flat relief carving done in a similar way, but the design elements are not geometric shapes, and images of animals, elements of nature, people. This type of carving is also used for making backgammon.
The finished product can be treated with colorless varnish
For such a wooden engraving you will need the following materials:
- set of wood cutters;
- soft wooden blank;
- sandpaper, pencils.
The product is manufactured following a certain sequence of actions.
- The wood is cleaned and prepared for work in advance. The design is applied to carbon paper and transferred to the workpiece.
- Contour carving is made according to the drawing; the relief and frame of the product are pre-selected.
- Upon completion, the work is treated with stain, dye or simply watercolors. Cleaned with sandpaper.
The finished product can be treated with colorless varnish.
Flowers: wood carving for beginners
Flowers are one of the main elements of many wood carving patterns. Cutting out this element is not difficult; it is important to follow the sequence of actions and the principle of operation.
- On wooden surface A drawing in the form of circles is applied and the details of the future flower are marked.
- The central circles are cut in a circle, after which they are cut from the outer circle to the center.
- After marking the petals, they are cut along the contour, cutting off the triangles between the petals, after which the outer contour of each petal is cut.
- An incision is made inside the flower, rounding the center of the design element.
You can decorate the drawing with any additional motifs; the geriola base of the product provides ample opportunities for toning.
Wood carving for beginners (video)
You can make templates, drawings and stencils for the router and carving yourself, using your own creativity, you can view and download from the Internet and print ready-made templates for free. Most of the ready-made stencils can be found on the Tatyanka website, some, no less interesting options They also offer other online resources.
