A device for making fishing line from plastic bottles. Homemade products for the dacha... rope made from plastic bottles, preparation for spring...

Related Categorized Posts

What should you put in the hole when planting tomatoes? Useful tips Tomatoes are many people's favorite vegetable. But to get juicy and rosy fruits, you need to work hard, because the tomato is quite…

It's hard to believe, but a brownie lives in a house that has these 10 things. Everyone has heard about brownies. Some people believe in them, some don't. But there is no smoke without fire. If…

How to make a lot of raspberries? How to make a lot of raspberries? The tips given in this article will help you resolve this issue. The first tip for caring for...

It’s surprising that plastic bottles that are thrown into general trash or simply left in nature: in forests, on lakes, in parks, do a lot of harm environment and the aesthetic appearance of recreational areas can bring many benefits. One of the applications, more precisely the transformation of plastic bottles into useful material, this is the creation of PET tape from them. It is this tape that we will now talk about.

To cut tape from plastic bottles you will need a simple device: a special machine. On the website Visiting Samodelkin, several options for such a machine are already presented, which are easy both to manufacture and to use.

PET tape is very useful thing and finds more and more new applications in the economy. Wrapping the handles of hammers and axes with PET tape will protect them from chips and dents. Over the years, the protective handles on pliers, wire cutters, and other tools tend to fall apart. Wrapping such tools with PET tape will be more durable, as the material is more resistant to low temperatures and ultraviolet.

You can use PET tape to make a broom that you can use to clean concrete paths on summer cottage or paths made of paving slabs.

In this video, lawyer Egorov will demonstrate the capabilities of a fishing line made from a plastic bottle; his catch was trout. Pet tape is quite durable and large fish will not tear it. The author of the video review treats this fishing as an interesting experiment and has no doubt that it is better to use purchased fishing line.

If possible, caught fish should be eaten on the spot - right while fishing. In nature, by the fire, everything looks more appetizing, and you will agree that the pestle tastes better the faster you cook it. The ribbon from the plastic bottle that was used was taken in such a bright color for greater clarity. Probably better to use transparent bottle, but as practice has shown, the bright colors of the tape hardly scare away the fish. In any case, this is just an experiment and of course it is better to use commercial fishing line.

So, using his hand, Egorov cut the bottle into strips into three-meter sections. He tied a hook to one end of the ribbon. Polyethylene terephthalate is not fluorocarbon and he recommends a regular bayonet assembly. You can attach a hook half the size to such a ribbon, but on the stream he always uses a large hook so that small trout cannot swallow it. After installation, the sinker is ready.

The method of catching fish with a plastic bottle will not require a lot of effort and time from you to make simple fishing gear.
With such a trap you can catch fish in almost all regions and in all continents where there is a river with fish.
All you need is a plastic bottle, hot glue gun, soldering iron, knife, fishing line or rope.
Take a five liter plastic bottle.

Cut off the top part.

Small bottle fish trap for fry

Almost every craftsman can build homemade fishing boats. You just need to choose the right material and connect it according to the diagram. This device can be used not only for fishing, but also for walking along a pond. You can also buy the product in a store, but it is not sold everywhere, and the cost is not at all pleasing. During the manufacture of the product, it is necessary to fix all parts securely and firmly. No joint should allow water to pass through. You should also calculate Weight Limit people who will be transported by the boat for fishing.

Most often, users are interested in how to make a boat themselves from classic wood materials. To do this, you first need to select the appropriate drawing. You will also need plywood sheets 0.5 cm thick.

You can make a boat with your own hands using the following technology:

1. First, you should draw paper templates according to the selected drawing and apply the contours to the plywood.
2. You can cut out fragments using electric jigsaw or saws with fine teeth. At the same time special attention should be noted at the angles at which the parts will be joined at the ends.
3. Fastening frames and transoms. To do this, you can use glue or galvanized screws.
4. Fixation of sides, bottom. Here you will also need a special strong waterproof glue. Additionally, the bottom from the inside of the boat is reinforced with slats. Absolutely all parts must match each other in size. The chamfers of those parts that will be in contact must be removed so that there is no gap between the surfaces.
5. Seam taping, corner reinforcement. To ensure that the connections do not allow moisture to pass through, they must be well sealed. Here you will need Aerosil and epoxy resin.
6. Fastening the oarlock and seats.
7. Sanding the outer surface. This is done as soon as the product is completely dry.
8. Impregnation of homemade products for fishing protective composition, its painting. It is better to use special paint that is intended for a wooden vessel.

To increase the strength of the product, it is necessary to make the tailgate and frames from several layers of material. If the boat is equipped with a motor, then the side on which it will be installed must be reinforced with hardwood wooden plates and also additionally glued with fiberglass.

To build a home “boat”, it is not necessary to use wood or plywood. You can even build a device from plastic bottles. At the same time, the made device will float just as well and is quite suitable for fishing(in addition, the master will spend less effort and time, as well as money on it).

For work you will need the following materials and tools:

• bottles (a small container will not work here; it is better to take products designed for 2 liters);
• glue and tape (they must be resistant to moisture);
• wire;
• stationery knife or scissors;
• plywood;
• wooden or metal crossbars.

The container is first cleared of labels. Next, it needs to be made more rigid. To do this, the bottles are placed in freezer, twist tightly, and then put in a warm place. The lids must be additionally fixed with water-resistant glue.

You need to form “logs” from the container. You can connect the elements with an improvised coupling, which is cut from the center of an empty bottle. The elements are fixed at the bottom. In this case, the protrusions of the other must fit into the recesses of one container. Next, the workpiece is fixed with glue and tape. Now you need to cut off the top parts from two bottles and put them on the necks of the finished design. The rest of the logs are made in this way.

From these products, collected in groups of 8, floats are made. You can connect the fragments with strong wire. The floats are fixed to each other wooden blocks. After the transverse parts are ready, you can attach the plywood bottom to them.

To give the product a beautiful appearance, you can sheathe it with plywood or metal sheets.

Among all fishing devices, a boat is the most cherished dream of a fisherman. Moreover, the ship can be quite small. For example, folding models can be taken with you when fishing with the least chance of not fitting them into the car. Most often, such structures are made of duralumin.

Additionally, you will need rubberized fabric, linings and rivets, wood, primer, wood, paint.

Installation of such products involves several stages:

1. Selection of material. You need 4 fragments for the sides and 2 for the bottom. You will also need 3 cross members: 2 spacers to ensure the reliability of the structure, and 1 seat.
2. Cutting out fragments, fitting them and bending them.
3. Making holes for rivets. The distance between them should not exceed 2 cm. All places where rivets were installed must be thickly coated with paint to seal them.
4. Galvanized fasteners are used to secure the seat.
5. Priming and painting the fixture.

It is better to fish from a boat of this type. It is unlikely to be suitable for a romantic walk. In order not to spoil the duralumin, it is better to first make fragments from cardboard and fit them.

When equipping the device boat motors, you can build a real boat. But it is not always needed.

• Buy a fish trap or make it yourself? ⇩
• Where to buy and at what price? ⇩
• What materials can traps be made from ⇩
• Types of homemade fish traps ⇩
• From a plastic bottle ⇩
• Stationary ⇩
• Flat screen traps ⇩
• Unusual traps ⇩
• Reviews about fishing on homemade traps ⇩

Fish traps were one of the first to appear, and only after them were the fishing gear we are familiar with invented. Such traps are still very popular today, especially if you need to catch nimble live bait for fishing.

Using a fishing rod is ineffective, because the fish will be injured and will not be able to live long. Therefore, fishermen use homemade simple designs that allow them to catch fish quickly and painlessly.

Buy a fish trap or make it yourself?

Many fishermen prefer to make such devices themselves, although you can buy ready-made designs in stores. But doing it yourself is still much better, because it allows you to save money, because you can even create it from regular bottle without spending a single ruble. The whole process takes little time.

There are a variety of fish traps on sale: different designs and materials, the choice is quite large. But not all of them will be effective, so in order to guarantee a catch, it’s worth spending a little time and making yourself an ideal and effective model.

Where to buy and at what price?

Such devices can be found in most online stores that specialize in selling fishing gear and components. You can also look in fishing stores, but the price will be a little higher. The cost of the trap depends on the manufacturer, material, and size of the structure. Price range from 200 rubles to 1000 rubles.

What materials can traps be made from?

They are made from the materials that the fisherman has available. Mainly made from simple materials, such as:

• Plastic bottles
• Branches
• Grids
• In the form of pens made of branches

Each such design has its pros and cons, which affect the efficiency of fishing. To make them you need different materials and just a little time and perseverance.

Types of homemade fish traps

There are a lot of species, since each angler, taking one as a basis, creates a completely new one, which is most suitable for him for certain fishing conditions and the desired type production

The main types are:

• Simple design from a plastic bottle
• Stationary models
• Flat screen traps
• Unusual types of traps

From a plastic bottle

Typically, such containers are thrown away after use, but they can be used to make an excellent container for catching small fish, which are often used as live bait. Big fish It is impossible to catch in this way, since the size of the trap itself does not allow it, but small prey is also very useful.

It’s very easy to make such a design with your own hands; you need the following materials and tools:

• Bottle 1-5 liters
• Sharp knife
• Rope or thin wire
• Wooden stick (optional)

Stages of work:

1. From the very beginning, the container must be washed well and freed from foreign odors, so as not to frighten the prey. Remove the label and scrape off the glue underneath.
2. Using a sharp knife, cut off the third part of the bottle at the top. After unscrewing the cap, place the smaller part inside the bottle, neck down. You need to make sure that the cropped borders coincide.
3. To secure the two halves, make small holes and connect the two halves at the top with rope or wire.
4. After this, you need to make many small holes on the surface of the bottle so that water can flow through them. Their size is very small, they should only allow water through, not prey.
5. Using a rope, attach the trap to a stick and throw it into the water. But you can do without it if you catch fry near the shore, where there are quite a lot of them.
6. Place some bait near the bottle and into it to lure prey. Use bread, semolina or dough for this.
7. Wait a little until the prey swims inside to feast on it, and pull it out.

Stationary

Using stationary models, you can catch even large individuals. To make them you need certain equipment. One of the most popular types of such traps is a mesh box.

The frame itself is made from materials that are at hand:

• Plastic water pipes
• Aluminum profile
• Wooden blocks

The size is determined by the fisherman himself, based on the characteristics of the fishing location and the size of the desired prey. Stages of work:

1. After the frame is made the right size, a metal mesh with small cells is stretched over it and tightly attached. You need to make sure that there are no gaps and everything fits tightly.
2. Make two funnels from the same mesh. Cut holes from both sides of the structure to the size of the funnels made.
3. You need to insert them narrow end inside, then tie it tightly.
4. To lure prey, place a little bait inside the box; depending on the type of desired fish, you can use fry or plant components.
5. After manufacturing, the trap is lowered to the bottom of the reservoir in suitable place and is checked regularly.

Flat screen traps

Every fisherman has seen such structures. They are made from wire or reinforcement and mesh. Outwardly, it resembles a wall, and there is a fishing line holding it in the corners.

The following materials are required for production:

• Armature
• fishing line

How to make:

1. It's very simple. First, a net and a fishing line are attached to the reinforcement, which holds the entire structure in a vertical position. You need to take a strong fishing line so that it can withstand at least several kilograms.
2. A small box containing food is installed in the center of the trap. Make small holes in it through which it will gradually be washed out.
3. You need to install it as deep as possible to catch large prey.
4. You can install not one grid, but two. The first has large holes, and the other has small holes. Thus, the fish gets inside and will not be able to escape.

Unusual traps

Such models depend entirely on the imagination of the fisherman and the materials that are available. Their appearance can be very different and unusual. For example, you can make a trap with which you can catch several fish for making fish soup. If you don’t have a bottle with you, but have a saucepan and gauze, then you can use them to catch some good prey.

Manufacturing stages:

1. Place gauze on the pan or bowl and secure it so that it does not wash away with water.
2. Make a small hole of a few centimeters in the center.
3. Place a small amount of bait inside the container, use what you have on hand: bread, porridge, grasshoppers.
4. Lower the structure into water and sprinkle it with mule and earth almost in the middle.
5. Literally in 20 minutes there will already be a lot of small fish inside, which will swim to the smell of the bait. Carefully plug the hole and remove the trap.

Reviews about fishing with homemade traps

• User Anton writes that he has been using homemade traps for a long time. These are mainly screens or mesh boxes. They are very convenient to catch and easy to do. Install it and within an hour or two there is already production.
• User Kostya writes that even as a child, some people made screens with friends from mesh, installed them in the current, and when the fish got into the holes, they got entangled and could not escape. Usually they brought home full buckets of loot.
• User Maxim writes that he tried to make a trap on his own several times, having tried the design and was disappointed, since he only came across one little thing that could only be used as bait. It wasn't a very successful experience.
• User Igor writes that he and his friends made a box from mesh. Came out quite big. They threw it into the water at a depth and threw in some bait. A few hours later they pulled it out, they were very happy, as there were a lot of fish, even several fairly large specimens were caught. We use this design regularly, there is always production.
• User Dmitry writes that homemade traps are very convenient, especially if you need to catch fry for fishing. And when you make a strong and large structure, you can hunt for large animals. Enough effective way catch a lot of “white fish” in a few hours.

Homemade fish traps are very popular to this day. They are incredibly practical and catchy. To make it, you don’t need to have any special skills or buy expensive materials. Every fisherman has everything he needs at home. And the process itself will take one hour at most.

Homemade fish traps - types and manufacturing process Link to main publication

• Editorial
• About the project

Pike rigs: varieties for summer and winter fishing

Nothing stops people who are passionate about fishing before going for fish. In the summer, in bad weather, they are ready to spend days on end on the shore of a reservoir; in the winter, no cold will scare them away from going out on the ice. In our country, winter fishing is no less common than summer fishing. A huge number of devices have been developed to help fish out prey from under thick ice.

Winter is the best time to catch predatory fish. The fact is that predators in the cold season are much more active than ordinary fish. Pike hunt actively in winter and go well with both jigs and girders. If fishing with a jig is considered active look fishing, girders are more suitable for lovers of quiet fishing. We will talk about how to fish with a zherlitsa in winter and summer.

What are girders?

Pike is a desirable catch for any fisherman. In summer you can catch it with any tackle, winter time The best way to catch pike is with a girder. In fact, only it allows you to achieve maximum results.

A zherlitsa is a piece of equipment that allows you to catch pike with live bait. There are a lot of varieties of this equipment. There are options for both the cold season and summer girders.

This tackle is sold in any store. Experienced fishermen prefer to make a pike girder with their own hands. They rightly believe that they know better how to fish more efficiently.

The classic winter vest has simple design. It consists of the following elements:

When buying ready-made tackle in a store, you need to pay attention to the following points:

• the coil must be plastic;
• its movement should be slightly difficult - it will avoid tangling of the fishing line;
• the bite alarm must be metal and have a bright flag;
• the length of the alarm should not exceed 50 cm;
• it must be flexible and durable enough not to react to the movements of live bait.

Types of girders for winter pike fishing

There are two types of this equipment. They differ in the type of installation. Each type of girder has both pros and cons.

On the platform

Such a platform is installed on a flat base with sides of 25x25 cm. The platform does not have to be square. It can be rectangular or round. The platform is usually made of wood or plastic.

The platform holder is installed directly on the hole and has the following advantages:

• the hole is closed from sunlight - the fish are not afraid of too bright light;
• the base of the girder slows down the freezing of the surface of the water in the hole - the fishing line winds up and unwinds freely.

The disadvantages of platform gear are much greater than the advantages:

On the counter

This design has much more advantages than disadvantages:

• the girder on the stand is easy to transport, it has small dimensions;
• the reel with fishing line is securely attached to stands made of any material: metal, wood, plastic;
• they are high enough - you don’t need to use signal posts during snowfall.

The rack on the stand has the following disadvantages:

• the fishing line freezes into the ice;
• the line freezes to the reel.

Both types of vents for winter fishing you can easily make it yourself.

How to make a pike girder for the summer?

Making girders is not as difficult as it might seem at first. It is quite beneficial in terms of saving money. A pike rig can be made from available materials. In most cases, tackle made correctly with your own hands turns out to be more effective than purchased analogues.

Zherlitsa-flyer

This is the simplest option that has been used since ancient times. Such a girder is still used with pleasure by many fishermen who do not want to spend a lot of money on gear. It is ideal for summer fishing. To make it yourself you need a minimum of materials and fishing accessories:

Tubular vent

This modern version classic zherlitsa. This summer gear is made from modern materials:

1. take a polymer tube with a diameter of about 50 mm and a length of up to 60 cm. You will also need a small piece of a bicycle tube;
2. make a couple of holes in the prepared tube. The first will be used in the future to secure the entire structure on the shore, and the second is needed to secure the fishing line;
3. We wind 15 m of fishing line onto the pipe. We pass the free end of the fishing line through the hole of a sliding sinker weighing 15 g. We stop the latter with an elastic band. At the end of the fishing line we attach a swivel for a leash;
4. To fix the resulting vent in the working position, we use a piece of a pre-prepared chamber approximately 2 cm wide.

Plastic bottle holder

This is the so-called hiking option. They resort to it when they initially did not plan to catch pike, but, once at the reservoir, they changed their mind. Making the gear looks like this:

• a fishing line is wound around an empty bottle and attached to the lid with several loops;
• Several loops are made at the free end of the fishing line, to which hooks and sinkers are attached.

All that remains is to put bait on the hooks, lower the tackle into the pond and wait for a bite.

It’s not at all difficult to make a summer perch with your own hands. Each angler decides for himself which design to use. All designs can be changed as you please. Perhaps you will be the one to create the most effective modification of the gear.

How to catch pike with a girder?

If the equipment was made correctly, there should be no problems with catching pikes. Winter and summer fishing for pike with a zherlitsa is slightly different. In winter, you need to drill holes in the ice in the areas where fish are expected to be found. In summer, gear has to be installed near the shore at shallow depths. In the warm season, pike actively feeds and can most often be found near thickets of reeds, bushes, etc.

Gutters should not be installed to the maximum depth. It is better to set the sinker at half water or a little lower. In this case, the pike will see the bait faster, because its gaze is always directed forward and slightly upward. If the bait is at the very bottom, the predator may simply not notice it.

Particular attention should be paid to the bait. Live bait should be small. Maximum size fry - 10 cm. Before attaching to the hook, cut off its tail fin. This will significantly limit its mobility and eliminate false alarms.

Live bait should be hooked to the dorsal fin. Be careful not to damage the fish's spine, otherwise it will die quickly and will not be of any use.

After installing the gear, you just need to watch it and wait for the signal “flag” to appear. Don’t rush to run to the tackle after it appears and hook. Let the predator play with the live bait and swallow the bait deeper. Allow the line to unwind completely. In this case, the extraction will definitely not be lost.

If everything is done correctly, it will be impossible to return home without loot.